Hi i tried to use the uart_C of the the odroid-c2.

I enabled it in the dts file. During boot it crashed when the
the sdcard slot is addressed.

After long search in the net i found this:

https://forum.odroid.com/viewtopic.php?f=139&t=25371&p=194370&hilit=uart_C#p177856

After changing the pin definitions accordingly erverything works.
Uart_c is functioning and sdcard ist working.

Fixes: 6db0f3a8 ("pinctrl: amlogic: gxbb: add more UART pins")
Signed-off-by: Otto Meier <gf435@gmx.net>
Link: https://lore.kernel.org/r/1cc32a18-464d-5531-7a1c-084390e2ecb1@gmx.netSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to unlock and enable IRQs before we return on this error path.

Fixes: 8a0cc47c ("pinctrl: sh-pfc: Rollback to mux if required when the gpio is freed")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20190827093927.GB8443@mwandaReviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.4 part 2

Just a single fix for build warning introduced in the previous pull.

The pointer log is being initialized with a value that is never read
and is being re-assigned a little later on. The assignment is
redundant and hence can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20190905140919.29283-1-colin.king@canonical.comReviewed-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add 'get_direction' support to the iProc GPIO driver.
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Link: https://lore.kernel.org/r/1568178685-30738-1-git-send-email-rayagonda.kokatanur@broadcom.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

When multiple instance of iproc-gpio chips are present, a fix up
message[1] is printed during the probe of second and later instances.

This issue is because driver sharing same irq_chip data structure
among multiple instances of driver.

Fix this by allocating irq_chip data structure per instance of
iproc-gpio.

[1] fix up message addressed by this patch
[  7.862208] gpio gpiochip2: (689d0000.gpio): detected irqchip that
   is shared with multiple gpiochips: please fix the driver.

Fixes: 616043d5 ("pinctrl: Rename gpio driver from cygnus to iproc")
Signed-off-by: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Link: https://lore.kernel.org/r/1567054348-19685-3-git-send-email-srinath.mannam@broadcom.com
[Rebased on top of new irq chip set-up code]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Fix drive strength for AON/CRMU controller; fix pull-up/down setting
for CCM/CDRU controller.

Fixes: 616043d5 ("pinctrl: Rename gpio driver from cygnus to iproc")
Signed-off-by: Li Jin <li.jin@broadcom.com>
Link: https://lore.kernel.org/r/1567054348-19685-2-git-send-email-srinath.mannam@broadcom.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The intel_pin_to_gpio() function is only called by the
PM support functions and causes a warning when those are disabled:

drivers/pinctrl/intel/pinctrl-intel.c:841:12: error: unused function 'intel_pin_to_gpio' [-Werror,-Wunused-function]

Mark it __maybe_unused to suppress the warning.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Chiu <chiu@endlessm.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>

The UFS_RESET pin is the magical pin #150 now, not 153 per the
sdm845_groups array declared in this file. Fix the order of pins so that
UFS_RESET is 150 and the SDC pins follow after.

Fixes: 53a5372c ("pinctrl: qcom: sdm845: Expose ufs_reset as gpio")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20190830060227.12792-1-swboyd@chromium.orgReviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Merge tag 'intel-pinctrl-v5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel

intel-pinctrl for v5.4

A collection of improvements and fixes for Intel pinctrl drivers
including:

  - Converting drivers to use new devm_platform_ioremap_resource()
    helper function.

  - Make Interrupt Status (IS) register configurable.

  - Allow locked pins to be requested and used as long as they are not
    modified.

  - Fix intel_pinctrl_should_save() to translate pin number to GPIO
    number where needed. This fixes Asus X571GT touchpad
    unresponsiveness issue after suspend/resume cycle.

With CP115 standalone modules, all MPP configuration are
possible. Handle this new possibility thanks to the new
"marvell,cp115-standalone-pinctrl" compatible property.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[<miquel.raynal@bootlin.com>: mention the new compatible in the
commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add missing definition for function 0xe on CP-110 MPP-62.
The pin function is Data Strobe for SDIO interface.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-2-miquel.raynal@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

A new compatible is going to be used for Armada CP115 pinctrl block,
document it.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[<miquel.raynal@bootlin.com>: split the documentation out of the
driver commit]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-3-miquel.raynal@bootlin.comReviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion. The BCM2835 has multiple parents so let's
exploit the new facility in the GPIO_IRQCHIP to actually
deal with multiple parents.

Cc: Eric Anholt <eric@anholt.net>
Cc: Thierry Reding <treding@nvidia.com>
[Rebased on changes in the pinctrl tree]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20190812062729.1892-1-linus.walleij@linaro.org

Merge tag 'sh-pfc-for-v5.4-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v5.4 (take two)

  - Support switching between function and gpio at runtime,
  - Small fixes and cleanups.

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190815060718.3286-1-nishkadg.linux@gmail.comReviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The user space like gpioinfo only see the GPIO usage but not the
MUX usage (e.g. I2C or SPI usage) of a pin. As a user we want
to know which pin is free/safe to use. So take the MUX usage of
strict pinmux controllers into account to get a more realistic
view for ioctl GPIO_GET_LINEINFO_IOCTL.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Link: https://lore.kernel.org/r/20190814110035.13451-1-ramon.fried@linux.intel.comAcked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-3-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-2-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150 GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-1-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.

As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.

This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.

Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.

Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190814090540.7152-1-drake@endlessm.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This driver is implementing a GPIO driver so include
<linux/gpio/driver.h> and not the legacy API <linux/gpio.h>.
When testing it turns out it also relies on implicit
inclusion of <linux/io.h> (readw etc) so make sure to
include that as well.

Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

These flags are for consumers of GPIO lines, not for
drivers.

Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This is a GPIO driver, use the appropriate header
<linux/gpio/driver.h> rather than the legacy <linux/gpio.h>
header.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Some drivers require switching between function and gpio at run-time.
Allow to roll back from gpio to mux when the gpio is freed.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Linux 5.3-rc5

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190815060609.3056-1-nishkadg.linux@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The ST pinctrl driver wants to provode a gpio_chip but is not
including the header for this, fix the inclusion to use the right
header. <linux/of_gpio.h> has to remain as the driver is calling
of_get_named_gpio().

Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190820111135.10701-1-linus.walleij@linaro.org

Static structures rk805_pinctrl_desc and rk805_gpio_chip, of types
gpio_chip and pinctrl_desc respectively, are not used except to be
copied into the fields of a different variable. Hence make
rk805_pinctrl_desc and rk805_gpio_chip both constant to protect them
from unintended modification.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190819075757.1753-1-nishkadg.linux@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds pinctrl register read to flush all the prior pinctrl
writes and then adds barrier for pinctrl register read to complete
during resume to make sure all pinctrl changes are effective.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-3-git-send-email-skomatineni@nvidia.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Pramod Kumar <pramodku@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190812132554.18313-1-linus.walleij@linaro.orgAcked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

On Asus X571GT, GPIO 297 is configured as an interrupt and serves
for the touchpad. The touchpad will report input events much less
than expected after S3 suspend/resume, which results in extremely
slow cursor movement. However, the number of interrupts observed
from /proc/interrupts increases much more than expected even no
touching touchpad.

This is due to the value of PADCFG0 of PIN 225 for the interrupt
has been changed from 0x80800102 to 0x80100102. The GPIROUTIOXAPIC
is toggled on which results in the spurious interrupts. The PADCFG0
of PIN 225 is expected to be saved during suspend, but the 297 is
saved instead because the gpiochip_line_is_irq() expect the GPIO
offset but what's really passed to it is PIN number. In this case,
the /sys/kernel/debug/pinctrl/INT3450:00/gpio-ranges shows

288: INT3450:00 GPIOS [436 - 459] PINS [216 - 239]

So gpiochip_line_is_irq() returns true for GPIO offset 297, the
suspend routine spuriously saves the content for PIN 297 which
we expect to save for PIN 225.

This commit maps the PIN number to GPIO offset first in the
intel_pinctrl_should_save() to make sure the values for the
specific PINs can be correctly saved and then restored.

Fixes: c538b943 ("pinctrl: intel: Only restore pins that are used by the driver")
Signed-off-by: Chris Chiu <chiu@endlessm.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull MTD fix from Richard Weinberger:
 "A single fix for MTD to correctly set the spi-nor WP pin"

* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the disabling of write protection at init

Some firmwares would like to protect pads from being modified by OS
and at the same time provide them to OS as a resource. So, the driver
in such circumstances may request pad and may not change its state.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>

Pull btrfs fixes from David Sterba:
 "Two fixes that popped up during testing:

   - fix for sysfs-related code that adds/removes block groups, warnings
     appear during several fstests in connection with sysfs updates in
     5.3, the fix essentially replaces a workaround with scope NOFS and
     applies to 5.2-based branch too

   - add sanity check of trim range"

* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: trim: Check the range passed into to prevent overflow
  Btrfs: fix sysfs warning and missing raid sysfs directories

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the inconsistent error handling in the umwait init code

   - Rework the boot param zeroing so gcc9 stops complaining about out
     of bound memset. The resulting source code is actually more sane to
     read than the smart solution we had

   - Maintainers update so Tony gets involved when Intel models are
     added

   - Some more fallthrough fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Save fields explicitly, zero out everything else
  MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
  x86/fpu/math-emu: Address fallthrough warnings
  x86/apic/32: Fix yet another implicit fallthrough warning
  x86/umwait: Fix error handling in umwait_init()

Pull EFI fix from Thomas Gleixner:
 "A single fix for a EFI mixed mode regression caused by recent rework
  which did not take the firmware bitwidth into account"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-stub: Fix get_efi_config_table on mixed-mode setups