Per task wakeup while not running (wwnr) monitor.

This model is broken, the reason is that a task can be running in the
processor without being set as RUNNABLE. Think about a task about to
sleep:

1:      set_current_state(TASK_UNINTERRUPTIBLE);
2:      schedule();

And then imagine an IRQ happening in between the lines one and two,
waking the task up. BOOM, the wakeup will happen while the task is
running.

Q: Why do we need this model, so?
A: To test the reactors.

Link: https://lkml.kernel.org/r/473c0fc39967250fdebcff8b620311c11dccad30.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The wakeup in preemptive (wip) monitor verifies if the
wakeup events always take place with preemption disabled:

                     |
                     |
                     v
                   #==================#
                   H    preemptive    H <+
                   #==================#  |
                     |                   |
                     | preempt_disable   | preempt_enable
                     v                   |
    sched_waking   +------------------+  |
  +--------------- |                  |  |
  |                |  non_preemptive  |  |
  +--------------> |                  | -+
                   +------------------+

The wakeup event always takes place with preemption disabled because
of the scheduler synchronization. However, because the preempt_count
and its trace event are not atomic with regard to interrupts, some
inconsistencies might happen.

The documentation illustrates one of these cases.

Link: https://lkml.kernel.org/r/c98ca678df81115fddc04921b3c79720c836b18f.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

THIS CODE IS NOT LINKED TO THE MAKEFILE.

This model does not compile because it lacks the instrumentation
part, which will be added next. In the typical case, there will be
only one patch, but it was split into two patches for educational
purposes.

This is the direct output this command line:
  $ dot2k -d tools/verification/models/wip.dot -t per_cpu

Link: https://lkml.kernel.org/r/5eb7a9118917e8a814c5e49853a72fc62be0a101.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add the da_monitor_instrumentation.rst. It describes the basics
of RV monitor instrumentation.

Link: https://lkml.kernel.org/r/0557d5c68e2fc252f2643c2cc5295a67e2b73277.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add the da_monitor_synthesis.rst introduces some concepts behind the
Deterministic Automata (DA) monitor synthesis and interface.

Link: https://lkml.kernel.org/r/7873bdb7b2e5d2bc0b2eb6ca0b324af9a0ba27a0.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

transform .dot file into kernel rv monitor

usage: dot2k [-h] -d DOT_FILE -t MONITOR_TYPE [-n MODEL_NAME] [-D DESCRIPTION]

optional arguments:
  -h, --help            show this help message and exit
  -d DOT_FILE, --dot DOT_FILE
  -t MONITOR_TYPE, --monitor_type MONITOR_TYPE
  -n MODEL_NAME, --model_name MODEL_NAME
  -D DESCRIPTION, --description DESCRIPTION

Link: https://lkml.kernel.org/r/083b3ae61e5a62c1e2e5d08009baa91f82181618.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add documentation about deterministic automaton and its possible
representations (formal, graphic, .dot and C).

Link: https://lkml.kernel.org/r/387edaed87630bd5eb37c4275045dfd229700aa6.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

dot2c is a tool that transforms an automata in the graphiviz .dot file
into an C representation of the automata.

usage: dot2c [-h] dot_file

dot2c: converts a .dot file into a C structure

positional arguments:
  dot_file    The dot file to be converted

optional arguments:
  -h, --help  show this help message and exit

Link: https://lkml.kernel.org/r/b26204ba9509c80bcda31b76cdea31ddb188cd24.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add the runtime-verification.rst document, explaining the basics of RV
and how to use the interface.

Link: https://lkml.kernel.org/r/4be7d1a88ab1e2eb0767521e1ab52a149a154bc4.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instrumentation helper functions to facilitate the instrumentation of
auto-generated RV monitors create by dot2k.

Link: https://lkml.kernel.org/r/3b36c9435f9d9299beb84e5c7c46920e205bedec.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

In Linux terms, the runtime verification monitors are encapsulated
inside the "RV monitor" abstraction. The "RV monitor" includes a set
of instances of the monitor (per-cpu monitor, per-task monitor, and
so on), the helper functions that glue the monitor to the system
reference model, and the trace output as a reaction for event parsing
and exceptions, as depicted below:

Linux  +----- RV Monitor ----------------------------------+ Formal
 Realm |                                                   |  Realm
 +-------------------+     +----------------+     +-----------------+
 |   Linux kernel    |     |     Monitor    |     |     Reference   |
 |     Tracing       |  -> |   Instance(s)  | <-  |       Model     |
 | (instrumentation) |     | (verification) |     | (specification) |
 +-------------------+     +----------------+     +-----------------+
        |                          |                       |
        |                          V                       |
        |                     +----------+                 |
        |                     | Reaction |                 |
        |                     +--+--+--+-+                 |
        |                        |  |  |                   |
        |                        |  |  +-> trace output ?  |
        +------------------------|--|----------------------+
                                 |  +----> panic ?
                                 +-------> <user-specified>

Add the rv/da_monitor.h, enabling automatic code generation for the
*Monitor Instance(s)* using C macros, and code to support it.

The benefits of the usage of macro for monitor synthesis are 3-fold as it:

- Reduces the code duplication;
- Facilitates the bug fix/improvement;
- Avoids the case of developers changing the core of the monitor code
  to manipulate the model in a (let's say) non-standard way.

This initial implementation presents three different types of monitor
instances:

- DECLARE_DA_MON_GLOBAL(name, type)
- DECLARE_DA_MON_PER_CPU(name, type)
- DECLARE_DA_MON_PER_TASK(name, type)

The first declares the functions for a global deterministic automata monitor,
the second for monitors with per-cpu instances, and the third with per-task
instances.

Link: https://lkml.kernel.org/r/51b0bf425a281e226dfeba7401d2115d6091f84e.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Formally, a deterministic automaton, denoted by G, is defined as a
quintuple:

  G = { X, E, f, x_0, X_m }

where:
	- X is the set of states;
	- E is the finite set of events;
	- x_0 is the initial state;
	- X_m (subset of X) is the set of marked states.
	- f : X x E -> X $ is the transition function. It defines the
	  state transition in the occurrence of a event from E in
	  the state X. In the special case of deterministic automata,
	  the occurrence of the event in E in a state in X has a
	  deterministic next state from X.

An automaton can also be represented using a graphical format of
vertices (nodes) and edges. The open-source tool Graphviz can produce
this graphic format using the (textual) DOT language as the source code.

The dot2c tool presented in this paper:

De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
Silva. Efficient formal verification for the Linux kernel. In:
International Conference on Software Engineering and Formal Methods.
Springer, Cham, 2019. p. 315-332.

Translates a deterministic automaton in the DOT format into a C
source code representation that to be used for monitoring.

This header file implements helper functions to facilitate the usage
of the C output from dot2c/k for monitoring.

Link: https://lkml.kernel.org/r/563234f2bfa84b540f60cf9e39c2d9f0eea95a55.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

A runtime monitor can cause a reaction to the detection of an
exception on the model's execution. By default, the monitors have
tracing reactions, printing the monitor output via tracepoints.
But other reactions can be added (on-demand) via this interface.

The user interface resembles the kernel tracing interface and
presents these files:

"available_reactors"
  - Reading shows the available reactors, one per line.

   For example:
     # cat available_reactors
     nop
     panic
     printk

 "reacting_on"
   - It is an on/off general switch for reactors, disabling
   all reactions.

 "monitors/MONITOR/reactors"
   - List available reactors, with the select reaction for the given
   MONITOR inside []. The default one is the nop (no operation)
   reactor.
   - Writing the name of a reactor enables it to the given
   MONITOR.

   For example:
     # cat monitors/wip/reactors
     [nop]
     panic
     printk
     # echo panic > monitors/wip/reactors
     # cat monitors/wip/reactors
     nop
     [panic]
     printk

Link: https://lkml.kernel.org/r/1794eb994637457bdeaa6bad0b8263d2f7eece0c.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

RV is a lightweight (yet rigorous) method that complements classical
exhaustive verification techniques (such as model checking and
theorem proving) with a more practical approach to complex systems.

RV works by analyzing the trace of the system's actual execution,
comparing it against a formal specification of the system behavior.
RV can give precise information on the runtime behavior of the
monitored system while enabling the reaction for unexpected
events, avoiding, for example, the propagation of a failure on
safety-critical systems.

The development of this interface roots in the development of the
paper:

De Oliveira, Daniel Bristot; Cucinotta, Tommaso; De Oliveira, Romulo
Silva. Efficient formal verification for the Linux kernel. In:
International Conference on Software Engineering and Formal Methods.
Springer, Cham, 2019. p. 315-332.

And:

De Oliveira, Daniel Bristot. Automata-based formal analysis
and verification of the real-time Linux kernel. PhD Thesis, 2020.

The RV interface resembles the tracing/ interface on purpose. The current
path for the RV interface is /sys/kernel/tracing/rv/.

It presents these files:

 "available_monitors"
   - List the available monitors, one per line.

   For example:
     # cat available_monitors
     wip
     wwnr

 "enabled_monitors"
   - Lists the enabled monitors, one per line;
   - Writing to it enables a given monitor;
   - Writing a monitor name with a '!' prefix disables it;
   - Truncating the file disables all enabled monitors.

   For example:
     # cat enabled_monitors
     # echo wip > enabled_monitors
     # echo wwnr >> enabled_monitors
     # cat enabled_monitors
     wip
     wwnr
     # echo '!wip' >> enabled_monitors
     # cat enabled_monitors
     wwnr
     # echo > enabled_monitors
     # cat enabled_monitors
     #

   Note that more than one monitor can be enabled concurrently.

 "monitoring_on"
   - It is an on/off general switcher for monitoring. Note
   that it does not disable enabled monitors or detach events,
   but stop the per-entity monitors of monitoring the events
   received from the system. It resembles the "tracing_on" switcher.

 "monitors/"
   Each monitor will have its one directory inside "monitors/". There
   the monitor specific files will be presented.
   The "monitors/" directory resembles the "events" directory on
   tracefs.

   For example:
     # cd monitors/wip/
     # ls
     desc  enable
     # cat desc
     wakeup in preemptive per-cpu testing monitor.
     # cat enable
     0

For further information, see the comments in the header of
kernel/trace/rv/rv.c from this patch.

Link: https://lkml.kernel.org/r/a4bfe038f50cb047bfb343ad0e12b0e646ab308b.1659052063.git.bristot@kernel.org

Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: Gabriele Paoloni <gpaoloni@redhat.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Clark Williams <williams@redhat.com>
Cc: Tao Zhou <tao.zhou@linux.dev>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-doc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-devel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When a ftrace_bug happens (where ftrace fails to modify a location) it is
helpful to have what was at that location as well as what was expected to
be there.

But with the conversion to text_poke() the variable that assigns the
expected for debugging was dropped. Unfortunately, I noticed this when I
needed it. Add it back.

Link: https://lkml.kernel.org/r/20220726101851.069d2e70@gandalf.local.home

Cc: "x86@kernel.org" <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: stable@vger.kernel.org
Fixes: 768ae440 ("x86/ftrace: Use text_poke()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If an instance of tracing enables the same trace event as another
instance, or the top level instance, or even perf, then the va_list passed
into some tracepoints can be used more than once.

As va_list can only be traversed once, this can cause issues:

 # cat /sys/kernel/tracing/instances/qla2xxx/trace
             cat-56106   [012] ..... 2419873.470098: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14:  Entered (null).
             cat-56106   [012] ..... 2419873.470101: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14:  Entered ×+<96>²Ü<98>^H.
             cat-56106   [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14:  Prepare to issue mbox cmd=0xde589000.

 # cat /sys/kernel/tracing/trace
             cat-56106   [012] ..... 2419873.470097: ql_dbg_log: qla2xxx [0000:05:00.0]-1054:14:  Entered qla2x00_get_firmware_state.
             cat-56106   [012] ..... 2419873.470100: ql_dbg_log: qla2xxx [0000:05:00.0]-1000:14:  Entered qla2x00_mailbox_command.
             cat-56106   [012] ..... 2419873.470102: ql_dbg_log: qla2xxx [0000:05:00.0]-1006:14:  Prepare to issue mbox cmd=0x69.

The instance version is corrupted because the top level instance iterated
the va_list first.

Use va_copy() in the __assign_vstr() macro to make sure that each trace
event for each use case gets a fresh va_list.

Link: https://lore.kernel.org/all/259d53a5-958e-6508-4e45-74dba2821242@marvell.com/
Link: https://lkml.kernel.org/r/20220719182004.21daa83e@gandalf.local.home

Fixes: 0563231f ("tracing/events: Add __vstring() and __assign_vstr() helper macros")
Reported-by: Arun Easi <aeasi@marvell.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220724191650.236b1355@rorschach.local.home

Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: b.a.t.m.a.n@lists.open-mesh.org
Cc: netdev@vger.kernel.org
Acked-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220719112719.17e796c6@gandalf.local.home

Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-usb@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-mediatek@lists.infradead.org
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The commit 208003254c32 ("selftests/kprobe: Do not test for GRP/
without event failures") removed a syntax which is no more cause
a syntax error (NO_EVENT_NAME error with GRP/).
However, there are another case (NO_EVENT_NAME error without GRP/)
which causes a same error. This adds a test for that case.

Link: https://lkml.kernel.org/r/165812790993.1377963.9762767354560397298.stgit@devnote2Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Update the sample trace events to include an example that uses the new
__vstring() helpers for TRACE_EVENTS.

Link: https://lkml.kernel.org/r/20220715175555.16375a3b@gandalf.local.homeSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

A new feature is added where kprobes (and other probes) do not need to
explicitly state the event name when creating a probe. The event name will
come from what is being attached.

That is:

  # echo 'p:foo/ vfs_read' > kprobe_events

Will no longer error, but instead create an event:

  # cat kprobe_events
 p:foo/p_vfs_read_0 vfs_read

This should not be tested as an error case anymore. Remove it from the
selftest as now this feature "breaks" the selftest as it no longer fails
as expected.

Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@quicinc.com/
Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.homeSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add kprobe and eprobe event test for new GRP/ only format.

Link: https://lore.kernel.org/all/1656296348-16111-5-git-send-email-quic_linyyuan@quicinc.com/Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Currently when creating a specific group of trace events,
take kprobe event as example, the user must use the following format:
p:GRP/EVENT [MOD:]KSYM[+OFFS]|KADDR [FETCHARGS],
which means user must enter EVENT name, one example is:

  echo 'p:usb_gadget/config_usb_cfg_link config_usb_cfg_link $arg1' >> kprobe_events

It is not simple if there are too many entries because the event name is
the same as symbol name.

This change allows user to specify no EVENT name, format changed as:

   p:GRP/ [MOD:]KSYM[+OFFS]|KADDR [FETCHARGS]

It will generate event name automatically and one example is:

  echo 'p:usb_gadget/ config_usb_cfg_link $arg1' >> kprobe_events.

Link: https://lore.kernel.org/all/1656296348-16111-4-git-send-email-quic_linyyuan@quicinc.com/Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

traceprobe_parse_event_name() already validate SYSTEM and EVENT name,
there is no need to call is_good_name() after it.

Link: https://lore.kernel.org/all/1656296348-16111-3-git-send-email-quic_linyyuan@quicinc.com/Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add trace_probe_log_set_index(1) to allow report correct error
if user input wrong SYSTEM.EVENT format.

Link: https://lore.kernel.org/all/1656296348-16111-2-git-send-email-quic_linyyuan@quicinc.com/Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Linyu Yuan <quic_linyyuan@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224751.271015450@goodmis.org

Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224750.896553364@goodmis.org

Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224750.715763972@goodmis.org

Cc: Fred Herard <fred.herard@oracle.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224750.532345354@goodmis.org

Cc: Bin Liu <b-liu@ti.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224750.172301548@goodmis.org

Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.991587733@goodmis.org

Cc: Peter Chen <peter.chen@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.806599472@goodmis.org

Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.622796175@goodmis.org

Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: SHA-cyfmac-dev-list@infineon.com
Cc: netdev@vger.kernel.org
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.430339634@goodmis.org

Cc: Kalle Valo <kvalo@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: ath10k@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: ath11k@lists.infradead.org
Acked-by: Kalle Valo <kvalo@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Instead of open coding a __dynamic_array() with a fixed length (which
defeats the purpose of the dynamic array in the first place). Use the new
__vstring() helper that will use a va_list and only write enough of the
string into the ring buffer that is needed.

Link: https://lkml.kernel.org/r/20220705224749.239494531@goodmis.org

Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There's several places that open code the following logic:

  TP_STRUCT__entry(__dynamic_array(char, msg, MSG_MAX)),
  TP_fast_assign(vsnprintf(__get_str(msg), MSG_MAX, vaf->fmt, *vaf->va);)

To load a string created by variable array va_list.

The main issue with this approach is that "MSG_MAX" usage in the
__dynamic_array() portion. That actually just reserves the MSG_MAX in the
event, and even wastes space because there's dynamic meta data also saved
in the event to denote the offset and size of the dynamic array. It would
have been better to just use a static __array() field.

Instead, create __vstring() and __assign_vstr() that work like __string
and __assign_str() but instead of taking a destination string to copy,
take a format string and a va_list pointer and fill in the values.

It uses the helper:

 #define __trace_event_vstr_len(fmt, va)		\
 ({							\
	va_list __ap;					\
	int __ret;					\
							\
	va_copy(__ap, *(va));				\
	__ret = vsnprintf(NULL, 0, fmt, __ap) + 1;	\
	va_end(__ap);					\
							\
	min(__ret, TRACE_EVENT_STR_MAX);		\
 })

To figure out the length to store the string. It may be slightly slower as
it needs to run the vsnprintf() twice, but it now saves space on the ring
buffer.

Link: https://lkml.kernel.org/r/20220705224749.053570613@goodmis.org

Cc: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Kalle Valo <kvalo@kernel.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Arend van Spriel <aspriel@gmail.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Gregory Greenman <gregory.greenman@intel.com>
Cc: Peter Chen <peter.chen@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Mathias Nyman <mathias.nyman@intel.com>
Cc: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: Bin Liu <b-liu@ti.com>
Cc: Marek Lindner <mareklindner@neomailbox.ch>
Cc: Simon Wunderlich <sw@simonwunderlich.de>
Cc: Antonio Quartulli <a@unstable.cc>
Cc: Sven Eckelmann <sven@narfation.org>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The dev field of the neigh_create event uses __dynamic_array() with a
fixed size, which defeats the purpose of __dynamic_array(). Looking at the
logic, as it already uses __assign_str(), just use the same logic in
__string to create the size needed. It appears that because "dev" can be
NULL, it needs the check. But __string() can have the same checks as
__assign_str() so use them there too.

Link: https://lkml.kernel.org/r/20220705183741.35387e3f@rorschach.local.home

Cc: David Ahern <dsahern@gmail.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The fib_lookup_table and fib6_lookup_table events declare name as a
dynamic_array, but also give it a fixed size, which defeats the purpose of
the dynamic array, especially since the dynamic array also includes meta
data in the event to specify its size.

Since the size of the name is at most 16 bytes (defined by IFNAMSIZ),
it is not worth spending the effort to determine the size of the string.

Just use a fixed size array and copy into it. This will save 4 bytes that
are used for the meta data that saves the size and position of a dynamic
array, and even slightly speed up the event processing.

Link: https://lkml.kernel.org/r/20220704091436.3705edbf@rorschach.local.home

Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The trace event devlink_trap_report uses the __dynamic_array() macro to
determine the size of the input_dev_name field. This is because it needs
to test the dev field for NULL, and will use "NULL" if it is. But it also
has the size of the dynamic array as a fixed IFNAMSIZ bytes. This defeats
the purpose of the dynamic array, as this will reserve that amount of
bytes on the ring buffer, and to make matters worse, it will even save
that size in the event as the event expects it to be dynamic (for which it
is not).

Since IFNAMSIZ is just 16 bytes, just make it a static array and this will
remove the meta data from the event that records the size.

Link: https://lkml.kernel.org/r/20220712185820.002d9fb5@gandalf.local.home

Cc: Leon Romanovsky <leon@kernel.org>
Cc: Jiri Pirko <jiri@nvidia.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: netdev@vger.kernel.org
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When I look into implements of create_hist_fields(), I think there can be
following two simplifications:
  1. If something wrong happened in parse_var_defs(), free_var_defs() would
     have been called in it, so no need goto free again after calling it;
  2. After calling create_key_fields(), regardless of the value of 'ret', it
     then always runs into 'out: ', so the judge of 'ret' is redundant.

Link: https://lkml.kernel.org/r/20220630013152.164871-1-zhengyejian1@huawei.comSigned-off-by: Zheng Yejian <zhengyejian1@huawei.com>
Reviewed-by: Tom Rix <trix@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>