Pull tracing updates from Steven Rostedt:
 "Major changes:

   - Changed location of tracing repo from personal git repo to:
     git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace.git

   - Added Masami Hiramatsu as co-maintainer

   - Updated MAINTAINERS file to separate out FTRACE as it is more than
     just TRACING.

  Minor changes:

   - Added Mark Rutland as FTRACE reviewer

   - Updated user_events to make it on its way to remove the BROKEN tag.
     The changes should now be acceptable but will run it through a
     cycle and hopefully we can remove the BROKEN tag next release.

   - Added filtering to eprobes

   - Added a delta time to the benchmark trace event

   - Have the histogram and filter callbacks called via a switch
     statement instead of indirect functions. This speeds it up to avoid
     retpolines.

   - Add a way to wake up ring buffer waiters waiting for the ring
     buffer to fill up to its watermark.

   - New ioctl() on the trace_pipe_raw file to wake up ring buffer
     waiters.

   - Wake up waiters when the ring buffer is disabled. A reader may
     block when the ring buffer is disabled, but if it was blocked when
     the ring buffer is disabled it should then wake up.

  Fixes:

   - Allow splice to read partially read ring buffer pages. This fixes
     splice never moving forward.

   - Fix inverted compare that made the "shortest" ring buffer wait
     queue actually the longest.

   - Fix a race in the ring buffer between resetting a page when a
     writer goes to another page, and the reader.

   - Fix ftrace accounting bug when function hooks are added at boot up
     before the weak functions are set to "disabled".

   - Fix bug that freed a user allocated snapshot buffer when enabling a
     tracer.

   - Fix possible recursive locks in osnoise tracer

   - Fix recursive locking direct functions

   - Other minor clean ups and fixes"

* tag 'trace-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (44 commits)
  ftrace: Create separate entry in MAINTAINERS for function hooks
  tracing: Update MAINTAINERS to reflect new tracing git repo
  tracing: Do not free snapshot if tracer is on cmdline
  ftrace: Still disable enabled records marked as disabled
  tracing/user_events: Move pages/locks into groups to prepare for namespaces
  tracing: Add Masami Hiramatsu as co-maintainer
  tracing: Remove unused variable 'dups'
  MAINTAINERS: add myself as a tracing reviewer
  ring-buffer: Fix race between reset page and reading page
  tracing/user_events: Update ABI documentation to align to bits vs bytes
  tracing/user_events: Use bits vs bytes for enabled status page data
  tracing/user_events: Use refcount instead of atomic for ref tracking
  tracing/user_events: Ensure user provided strings are safely formatted
  tracing/user_events: Use WRITE instead of READ for io vector import
  tracing/user_events: Use NULL for strstr checks
  tracing: Fix spelling mistake "preapre" -> "prepare"
  tracing: Wake up waiters when tracing is disabled
  tracing: Add ioctl() to force ring buffer waiters to wake up
  tracing: Wake up ring buffer waiters on closing of the file
  ring-buffer: Add ring_buffer_wake_waiters()
  ...

Pull sysctl updates from Luis Chamberlain:
 "Just some boring cleanups on the sysctl front for this release"

* tag 'sysctl-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  kernel/sysctl-test: use SYSCTL_{ZERO/ONE_HUNDRED} instead of i_{zero/one_hundred}
  kernel/sysctl.c: move sysctl_vals and sysctl_long_vals to sysctl.c
  sysctl: remove max_extfrag_threshold
  kernel/sysctl.c: remove unnecessary (void*) conversions
  proc: remove initialization assignment

This ensures that no module record/or entry is added to the
unloaded_tainted_modules list if it does not carry a taint.
Reported-by: Alexey Dobriyan <adobriyan@gmail.com>
Fixes: 99bd9956 ("module: Introduce module unload taint tracking")
Signed-off-by: Aaron Tomlin <atomlin@redhat.com>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull module updates from Luis Chamberlain:

 - minor enhancement for sysfs compression string (David Disseldorp)

 - debugfs interface to view unloaded tainted modules (Aaron Tomlin)

* tag 'modules-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module/decompress: generate sysfs string at compile time
  module: Add debugfs interface to view unloaded tainted modules

Pull Kbuild updates from Masahiro Yamada:

 - Remove potentially incomplete targets when Kbuid is interrupted by
   SIGINT etc in case GNU Make may miss to do that when stderr is piped
   to another program.

 - Rewrite the single target build so it works more correctly.

 - Fix rpm-pkg builds with V=1.

 - List top-level subdirectories in ./Kbuild.

 - Ignore auto-generated __kstrtab_* and __kstrtabns_* symbols in
   kallsyms.

 - Avoid two different modules in lib/zstd/ having shared code, which
   potentially causes building the common code as build-in and modular
   back-and-forth.

 - Unify two modpost invocations to optimize the build process.

 - Remove head-y syntax in favor of linker scripts for placing
   particular sections in the head of vmlinux.

 - Bump the minimal GNU Make version to 3.82.

 - Clean up misc Makefiles and scripts.

* tag 'kbuild-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (41 commits)
  docs: bump minimal GNU Make version to 3.82
  ia64: simplify esi object addition in Makefile
  Revert "kbuild: Check if linker supports the -X option"
  kbuild: rebuild .vmlinux.export.o when its prerequisite is updated
  kbuild: move modules.builtin(.modinfo) rules to Makefile.vmlinux_o
  zstd: Fixing mixed module-builtin objects
  kallsyms: ignore __kstrtab_* and __kstrtabns_* symbols
  kallsyms: take the input file instead of reading stdin
  kallsyms: drop duplicated ignore patterns from kallsyms.c
  kbuild: reuse mksysmap output for kallsyms
  mksysmap: update comment about __crc_*
  kbuild: remove head-y syntax
  kbuild: use obj-y instead extra-y for objects placed at the head
  kbuild: hide error checker logs for V=1 builds
  kbuild: re-run modpost when it is updated
  kbuild: unify two modpost invocations
  kbuild: move vmlinux.o rule to the top Makefile
  kbuild: move .vmlinux.objs rule to Makefile.modpost
  kbuild: list sub-directories in ./Kbuild
  Makefile.compiler: replace cc-ifversion with compiler-specific macros
  ...

Merge tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching

Pull livepatching updates from Petr Mladek:

 - Fix race between fork and livepatch transition revert

 - Add sysfs entry that shows "patched" state for each object (module)
   that can be livepatched by the given livepatch

 - Some clean up

* tag 'livepatching-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  selftests/livepatch: add sysfs test
  livepatch: add sysfs entry "patched" for each klp_object
  selftests/livepatch: normalize sysctl error message
  livepatch: Add a missing newline character in klp_module_coming()
  livepatch: fix race between fork and KLP transition

Pull printk updates from Petr Mladek:

 - Initialize pointer hashing using the system workqueue. It avoids
   taking locks in printk()/vsprintf() code path

 - Misc code clean up

* tag 'printk-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Mark __printk percpu data ready __ro_after_init
  printk: Remove bogus comment vs. boot consoles
  printk: Remove write only variable nr_ext_console_drivers
  printk: Declare log_wait properly
  printk: Make pr_flush() static
  lib/vsprintf: Initialize vsprintf's pointer hash once the random core is ready.
  lib/vsprintf: Remove static_branch_likely() from __ptr_to_hashval().
  lib/vnsprintf: add const modifier for param 'bitmap'

Pull cgroup updates from Tejun Heo:

 - cpuset now support isolated cpus.partition type, which will enable
   dynamic CPU isolation

 - pids.peak added to remember the max number of pids used

 - holes in cgroup namespace plugged

 - internal cleanups

* tag 'cgroup-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (25 commits)
  cgroup: use strscpy() is more robust and safer
  iocost_monitor: reorder BlkgIterator
  cgroup: simplify code in cgroup_apply_control
  cgroup: Make cgroup_get_from_id() prettier
  cgroup/cpuset: remove unreachable code
  cgroup: Remove CFTYPE_PRESSURE
  cgroup: Improve cftype add/rm error handling
  kselftest/cgroup: Add cpuset v2 partition root state test
  cgroup/cpuset: Update description of cpuset.cpus.partition in cgroup-v2.rst
  cgroup/cpuset: Make partition invalid if cpumask change violates exclusivity rule
  cgroup/cpuset: Relocate a code block in validate_change()
  cgroup/cpuset: Show invalid partition reason string
  cgroup/cpuset: Add a new isolated cpus.partition type
  cgroup/cpuset: Relax constraints to partition & cpus changes
  cgroup/cpuset: Allow no-task partition to have empty cpuset.cpus.effective
  cgroup/cpuset: Miscellaneous cleanups & add helper functions
  cgroup/cpuset: Enable update_tasks_cpumask() on top_cpuset
  cgroup: add pids.peak interface for pids controller
  cgroup: Remove data-race around cgrp_dfl_visible
  cgroup: Fix build failure when CONFIG_SHRINKER_DEBUG
  ...

Pull random number generator updates from Jason Donenfeld:

 - Huawei reported that when they updated their kernel from 4.4 to
   something much newer, some userspace code they had broke, the culprit
   being the accidental removal of O_NONBLOCK from /dev/random way back
   in 5.6. It's been gone for over 2 years now and this is the first
   we've heard of it, but userspace breakage is userspace breakage, so
   O_NONBLOCK is now back.

 - Use randomness from hardware RNGs much more often during early boot,
   at the same interval that crng reseeds are done, from Dominik.

 - A semantic change in hardware RNG throttling, so that the hwrng
   framework can properly feed random.c with randomness from hardware
   RNGs that aren't specifically marked as creditable.

   A related patch coming to you via Herbert's hwrng tree depends on
   this one, not to compile, but just to function properly, so you may
   want to merge this PULL before that one.

 - A fix to clamp credited bits from the interrupts pool to the size of
   the pool sample. This is mainly just a theoretical fix, as it'd be
   pretty hard to exceed it in practice.

 - Oracle reported that InfiniBand TCP latency regressed by around
   10-15% after a change a few cycles ago made at the request of the RT
   folks, in which we hoisted a somewhat rare operation (1 in 1024
   times) out of the hard IRQ handler and into a workqueue, a pretty
   common and boring pattern.

   It turns out, though, that scheduling a worker from there has
   overhead of its own, whereas scheduling a timer on that same CPU for
   the next jiffy amortizes better and doesn't incur the same overhead.

   I also eliminated a cache miss by moving the work_struct (and
   subsequently, the timer_list) to below a critical cache line, so that
   the more critical members that are accessed on every hard IRQ aren't
   split between two cache lines.

 - The boot-time initialization of the RNG has been split into two
   approximate phases: what we can accomplish before timekeeping is
   possible and what we can accomplish after.

   This winds up being useful so that we can use RDRAND to seed the RNG
   before CONFIG_SLAB_FREELIST_RANDOM=y systems initialize slabs, in
   addition to other early uses of randomness. The effect is that
   systems with RDRAND (or a bootloader seed) will never see any
   warnings at all when setting CONFIG_WARN_ALL_UNSEEDED_RANDOM=y. And
   kfence benefits from getting a better seed of its own.

 - Small systems without much entropy sometimes wind up putting some
   truncated serial number read from flash into hostname, so contribute
   utsname changes to the RNG, without crediting.

 - Add smaller batches to serve requests for smaller integers, and make
   use of them when people ask for random numbers bounded by a given
   compile-time constant. This has positive effects all over the tree,
   most notably in networking and kfence.

 - The original jitter algorithm intended (I believe) to schedule the
   timer for the next jiffy, not the next-next jiffy, yet it used
   mod_timer(jiffies + 1), which will fire on the next-next jiffy,
   instead of what I believe was intended, mod_timer(jiffies), which
   will fire on the next jiffy. So fix that.

 - Fix a comment typo, from William.

* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: clear new batches when bringing new CPUs online
  random: fix typos in get_random_bytes() comment
  random: schedule jitter credit for next jiffy, not in two jiffies
  prandom: make use of smaller types in prandom_u32_max
  random: add 8-bit and 16-bit batches
  utsname: contribute changes to RNG
  random: use init_utsname() instead of utsname()
  kfence: use better stack hash seed
  random: split initialization into early step and later step
  random: use expired timer rather than wq for mixing fast pool
  random: avoid reading two cache lines on irq randomness
  random: clamp credited irq bits to maximum mixed
  random: throttle hwrng writes if no entropy is credited
  random: use hwgenerator randomness more frequently at early boot
  random: restore O_NONBLOCK support

Pull slab fixes from Vlastimil Babka:

 - The "common kmalloc v4" series [1] by Hyeonggon Yoo.

   While the plan after LPC is to try again if it's possible to get rid
   of SLOB and SLAB (and if any critical aspect of those is not possible
   to achieve with SLUB today, modify it accordingly), it will take a
   while even in case there are no objections.

   Meanwhile this is a nice cleanup and some parts (e.g. to the
   tracepoints) will be useful even if we end up with a single slab
   implementation in the future:

      - Improves the mm/slab_common.c wrappers to allow deleting
        duplicated code between SLAB and SLUB.

      - Large kmalloc() allocations in SLAB are passed to page allocator
        like in SLUB, reducing number of kmalloc caches.

      - Removes the {kmem_cache_alloc,kmalloc}_node variants of
        tracepoints, node id parameter added to non-_node variants.

 - Addition of kmalloc_size_roundup()

   The first two patches from a series by Kees Cook [2] that introduce
   kmalloc_size_roundup(). This will allow merging of per-subsystem
   patches using the new function and ultimately stop (ab)using ksize()
   in a way that causes ongoing trouble for debugging functionality and
   static checkers.

 - Wasted kmalloc() memory tracking in debugfs alloc_traces

   A patch from Feng Tang that enhances the existing debugfs
   alloc_traces file for kmalloc caches with information about how much
   space is wasted by allocations that needs less space than the
   particular kmalloc cache provides.

 - My series [3] to fix validation races for caches with enabled
   debugging:

      - By decoupling the debug cache operation more from non-debug
        fastpaths, extra locking simplifications were possible and thus
        done afterwards.

      - Additional cleanup of PREEMPT_RT specific code on top, by Thomas
        Gleixner.

      - A late fix for slab page leaks caused by the series, by Feng
        Tang.

 - Smaller fixes and cleanups:

      - Unneeded variable removals, by ye xingchen

      - A cleanup removing a BUG_ON() in create_unique_id(), by Chao Yu

Link: https://lore.kernel.org/all/20220817101826.236819-1-42.hyeyoo@gmail.com/ [1]
Link: https://lore.kernel.org/all/20220923202822.2667581-1-keescook@chromium.org/ [2]
Link: https://lore.kernel.org/all/20220823170400.26546-1-vbabka@suse.cz/ [3]

* tag 'slab-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: (30 commits)
  mm/slub: fix a slab missed to be freed problem
  slab: Introduce kmalloc_size_roundup()
  slab: Remove __malloc attribute from realloc functions
  mm/slub: clean up create_unique_id()
  mm/slub: enable debugging memory wasting of kmalloc
  slub: Make PREEMPT_RT support less convoluted
  mm/slub: simplify __cmpxchg_double_slab() and slab_[un]lock()
  mm/slub: convert object_map_lock to non-raw spinlock
  mm/slub: remove slab_lock() usage for debug operations
  mm/slub: restrict sysfs validation to debug caches and make it safe
  mm/sl[au]b: check if large object is valid in __ksize()
  mm/slab_common: move declaration of __ksize() to mm/slab.h
  mm/slab_common: drop kmem_alloc & avoid dereferencing fields when not using
  mm/slab_common: unify NUMA and UMA version of tracepoints
  mm/sl[au]b: cleanup kmem_cache_alloc[_node]_trace()
  mm/sl[au]b: generalize kmalloc subsystem
  mm/slub: move free_debug_processing() further
  mm/sl[au]b: introduce common alloc/free functions without tracepoint
  mm/slab: kmalloc: pass requests larger than order-1 page to page allocator
  mm/slab_common: cleanup kmalloc_large()
  ...

Pull timer updates from Thomas Gleixner:
 "A boring time, timekeeping, timers update:

   - No core code changes

   - No new clocksource/event driver

   - Cleanup of the TI DM clocksource/event driver

   - The usual set of device tree binding updates

   - Small improvement, fixes and cleanups all over the place"

* tag 'timers-core-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits)
  clocksource/drivers/arm_arch_timer: Fix CNTPCT_LO and CNTVCT_LO value
  clocksource/drivers/imx-sysctr: handle nxp,no-divider property
  dt-bindings: timer: nxp,sysctr-timer: add nxp,no-divider property
  clocksource/drivers/timer-ti-dm: Get clock in probe with devm_clk_get()
  clocksource/drivers/timer-ti-dm: Add flag to detect omap1
  clocksource/drivers/timer-ti-dm: Move struct omap_dm_timer fields to driver
  clocksource/drivers/timer-ti-dm: Use runtime PM directly and check errors
  clocksource/drivers/timer-ti-dm: Move private defines to the driver
  clocksource/drivers/timer-ti-dm: Simplify register access further
  clocksource/drivers/timer-ti-dm: Simplify register writes with dmtimer_write()
  clocksource/drivers/timer-ti-dm: Simplify register reads with dmtimer_read()
  clocksource/drivers/timer-ti-dm: Drop unused functions
  clocksource/drivers/timer-gxp: Add missing error handling in gxp_timer_probe
  clocksource/drivers/arm_arch_timer: Fix handling of ARM erratum 858921
  clocksource/drivers/exynos_mct: Enable building on ARTPEC
  clocksource/drivers/exynos_mct: Support local-timers property
  clocksource/drivers/exynos_mct: Support frc-shared property
  dt-bindings: timer: exynos4210-mct: Add ARTPEC-8 MCT support
  clocksource/drivers/sun4i: Add definition of clear interrupt
  clocksource/drivers/renesas-ostm: Add support for RZ/V2L SoC
  ...

Pull preempt RT updates from Thomas Gleixner:
 "Introduce preempt_[dis|enable_nested() and use it to clean up various
  places which have open coded PREEMPT_RT conditionals.

  On PREEMPT_RT enabled kernels, spinlocks and rwlocks are neither
  disabling preemption nor interrupts. Though there are a few places
  which depend on the implicit preemption/interrupt disable of those
  locks, e.g. seqcount write sections, per CPU statistics updates etc.

  PREEMPT_RT added open coded CONFIG_PREEMPT_RT conditionals to
  disable/enable preemption in the related code parts all over the
  place. That's hard to read and does not really explain why this is
  necessary.

  Linus suggested to use helper functions (preempt_disable_nested() and
  preempt_enable_nested()) and use those in the affected places. On !RT
  enabled kernels these functions are NOPs, but contain a lockdep assert
  to validate that preemption is actually disabled to catch call sites
  which do not have preemption disabled.

  Clean up the affected code paths in mm, dentry and lib"

* tag 'sched-rt-2022-10-05' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  u64_stats: Streamline the implementation
  flex_proportions: Disable preemption entering the write section.
  mm/compaction: Get rid of RT ifdeffery
  mm/memcontrol: Replace the PREEMPT_RT conditionals
  mm/debug: Provide VM_WARN_ON_IRQS_ENABLED()
  mm/vmstat: Use preempt_[dis|en]able_nested()
  dentry: Use preempt_[dis|en]able_nested()
  preempt: Provide preempt_[dis|en]able_nested()

Pull objtool updates from Ingo Molnar:

 - Remove the "ANNOTATE_NOENDBR on ENDBR" warning: it's not really
   useful and only found a non-bug false positive so far.

 - Properly decode LOOP/LOOPE/LOOPNE, which were missing from the x86
   decoder. Because these instructions are rather ineffective, they
   never showed up in compiler output, but they are simple enough to
   support, so add them for completeness.

 - A bit more cross-arch preparatory work.

* tag 'objtool-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool,x86: Teach decode about LOOP* instructions
  objtool: Remove "ANNOTATE_NOENDBR on ENDBR" warning
  objtool: Use arch_jump_destination() in read_intra_function_calls()

Pull locking updates from Ingo Molnar:

 - Disable preemption in rwsem_write_trylock()'s attempt to take the
   rwsem, to avoid RT tasks hogging the CPU, which managed to preempt
   this function after the owner has been cleared but before a new owner
   is set. Also add debug checks to enforce this.

 - Add __lockfunc to more slow path functions and add __sched to
   semaphore functions.

 - Mark spinlock APIs noinline when the respective CONFIG_INLINE_SPIN_*
   toggles are disabled, to reduce LTO text size.

 - Print more debug information when lockdep gets confused in
   look_up_lock_class().

 - Improve header file abuse checks.

 - Misc cleanups

* tag 'locking-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Print more debug information - report name and key when look_up_lock_class() got confused
  locking: Add __sched to semaphore functions
  locking/rwsem: Disable preemption while trying for rwsem lock
  locking: Detect includes rwlock.h outside of spinlock.h
  locking: Add __lockfunc to slow path functions
  locking/spinlocks: Mark spinlocks noinline when inline spinlocks are disabled
  selftests: futex: Fix 'the the' typo in comment

Pull perf events updates from Ingo Molnar:
 "PMU driver updates:

   - Add AMD Last Branch Record Extension Version 2 (LbrExtV2) feature
     support for Zen 4 processors.

   - Extend the perf ABI to provide branch speculation information, if
     available, and use this on CPUs that have it (eg. LbrExtV2).

   - Improve Intel PEBS TSC timestamp handling & integration.

   - Add Intel Raptor Lake S CPU support.

   - Add 'perf mem' and 'perf c2c' memory profiling support on AMD CPUs
     by utilizing IBS tagged load/store samples.

   - Clean up & optimize various x86 PMU details.

  HW breakpoints:

   - Big rework to optimize the code for systems with hundreds of CPUs
     and thousands of breakpoints:

      - Replace the nr_bp_mutex global mutex with the bp_cpuinfo_sem
        per-CPU rwsem that is read-locked during most of the key
        operations.

      - Improve the O(#cpus * #tasks) logic in toggle_bp_slot() and
        fetch_bp_busy_slots().

      - Apply micro-optimizations & cleanups.

  - Misc cleanups & enhancements"

* tag 'perf-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (75 commits)
  perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
  perf: Fix pmu_filter_match()
  perf: Fix lockdep_assert_event_ctx()
  perf/x86/amd/lbr: Adjust LBR regardless of filtering
  perf/x86/utils: Fix uninitialized var in get_branch_type()
  perf/uapi: Define PERF_MEM_SNOOPX_PEER in kernel header file
  perf/x86/amd: Support PERF_SAMPLE_PHY_ADDR
  perf/x86/amd: Support PERF_SAMPLE_ADDR
  perf/x86/amd: Support PERF_SAMPLE_{WEIGHT|WEIGHT_STRUCT}
  perf/x86/amd: Support PERF_SAMPLE_DATA_SRC
  perf/x86/amd: Add IBS OP_DATA2 DataSrc bit definitions
  perf/mem: Introduce PERF_MEM_LVLNUM_{EXTN_MEM|IO}
  perf/x86/uncore: Add new Raptor Lake S support
  perf/x86/cstate: Add new Raptor Lake S support
  perf/x86/msr: Add new Raptor Lake S support
  perf/x86: Add new Raptor Lake S support
  bpf: Check flags for branch stack in bpf_read_branch_records helper
  perf, hw_breakpoint: Fix use-after-free if perf_event_open() fails
  perf: Use sample_flags for raw_data
  perf: Use sample_flags for addr
  ...

Pull scheduler updates from Ingo Molnar:
 "Debuggability:

   - Change most occurances of BUG_ON() to WARN_ON_ONCE()

   - Reorganize & fix TASK_ state comparisons, turn it into a bitmap

   - Update/fix misc scheduler debugging facilities

  Load-balancing & regular scheduling:

   - Improve the behavior of the scheduler in presence of lot of
     SCHED_IDLE tasks - in particular they should not impact other
     scheduling classes.

   - Optimize task load tracking, cleanups & fixes

   - Clean up & simplify misc load-balancing code

  Freezer:

   - Rewrite the core freezer to behave better wrt thawing and be
     simpler in general, by replacing PF_FROZEN with TASK_FROZEN &
     fixing/adjusting all the fallout.

  Deadline scheduler:

   - Fix the DL capacity-aware code

   - Factor out dl_task_is_earliest_deadline() &
     replenish_dl_new_period()

   - Relax/optimize locking in task_non_contending()

  Cleanups:

   - Factor out the update_current_exec_runtime() helper

   - Various cleanups, simplifications"

* tag 'sched-core-2022-10-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
  sched: Fix more TASK_state comparisons
  sched: Fix TASK_state comparisons
  sched/fair: Move call to list_last_entry() in detach_tasks
  sched/fair: Cleanup loop_max and loop_break
  sched/fair: Make sure to try to detach at least one movable task
  sched: Show PF_flag holes
  freezer,sched: Rewrite core freezer logic
  sched: Widen TAKS_state literals
  sched/wait: Add wait_event_state()
  sched/completion: Add wait_for_completion_state()
  sched: Add TASK_ANY for wait_task_inactive()
  sched: Change wait_task_inactive()s match_state
  freezer,umh: Clean up freezer/initrd interaction
  freezer: Have {,un}lock_system_sleep() save/restore flags
  sched: Rename task_running() to task_on_cpu()
  sched/fair: Cleanup for SIS_PROP
  sched/fair: Default to false in test_idle_cores()
  sched/fair: Remove useless check in select_idle_core()
  sched/fair: Avoid double search on same cpu
  sched/fair: Remove redundant check in select_idle_smt()
  ...

Merge tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts update from Eric Biederman:
 "Split rlimit and ucount values and max values

  After the ucount rlimit code was merged a bunch of small but
  siginificant bugs were found and fixed. At the time it was realized
  that part of the problem was that while the ucount rlimits were very
  similar to the oridinary ucounts (in being nested counts with limits)
  the semantics were slightly different and the code would be less error
  prone if there was less sharing.

  This is the long awaited cleanup that should hopefully keep things
  more comprehensible and less error prone for whoever needs to touch
  that code next"

* tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Split rlimit and ucount values and max values

Merge tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace update from Eric Biederman:
 "ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT

  Recently I had a conversation where it was pointed out to me that
  SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
  difficult for a tracer to handle.

  Keeping SIGKILL working after the process has been killed is pain from
  an implementation point of view.

  So since the debuggers don't want this behavior let's see if we can
  remove this wart for the userspace API

  If a regression is detected it should only need to be the last change
  that is the reverted. The other two are just general cleanups that
  make the last patch simpler"

* tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Drop signals received after a fatal signal has been processed
  signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
  signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit

Merge tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull mqueue fix from Eric Biederman:
 "A fix for an unlikely but possible memory leak"

* tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc: mqueue: fix possible memory leak in init_mqueue_fs()

Merge tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull kthread update from Eric Biederman:
 "Break out of wait loops on kthread_stop()

  This is a small tweak to kthread_stop so it breaks out of
  interruptible waits, that don't explicitly test for kthread_stop.

  These interruptible waits occassionaly occur in kernel threads do to
  code sharing"

* tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: break out of wait loops on kthread_stop()

Pull powerpc updates from Michael Ellerman:

 - Remove our now never-true definitions for pgd_huge() and p4d_leaf().

 - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.

 - Add support for syscall wrappers.

 - Add support for KFENCE on 64-bit.

 - Update 64-bit HV KVM to use the new guest state entry/exit accounting
   API.

 - Support execute-only memory when using the Radix MMU (P9 or later).

 - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.

 - Updates to our linker script to move more data into read-only
   sections.

 - Allow the VDSO to be randomised on 32-bit.

 - Many other small features and fixes.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.

* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  KVM: PPC: Book3S HV: Fix stack frame regs marker
  powerpc: Don't add __powerpc_ prefix to syscall entry points
  powerpc/64s/interrupt: Fix stack frame regs marker
  powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
  powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
  powerpc/pseries: Add firmware details to the hardware description
  powerpc/powernv: Add opal details to the hardware description
  powerpc: Add device-tree model to the hardware description
  powerpc/64: Add logical PVR to the hardware description
  powerpc: Add PVR & CPU name to hardware description
  powerpc: Add hardware description string
  powerpc/configs: Enable PPC_UV in powernv_defconfig
  powerpc/configs: Update config files for removed/renamed symbols
  powerpc/mm: Fix UBSAN warning reported on hugetlb
  powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
  powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
  powerpc: Drops STABS_DEBUG from linker scripts
  powerpc/64s: Remove lost/old comment
  powerpc/64s: Remove old STAB comment
  powerpc: remove orphan systbl_chk.sh
  ...

Pull s390 updates from Vasily Gorbik:

 - Make use of the IBM z16 processor activity instrumentation facility
   extension to count neural network processor assist operations: add a
   new PMU device driver so that perf can make use of this.

 - Rework memcpy_real() to avoid DAT-off mode.

 - Rework absolute lowcore access code.

 - Various small fixes and improvements all over the code.

* tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: remove unused bus_next field from struct zpci_dev
  s390/cio: remove unused ccw_device_force_console() declaration
  s390/pai: Add support for PAI Extension 1 NNPA counters
  s390/mm: fix no previous prototype warnings in maccess.c
  s390/mm: uninline copy_oldmem_kernel() function
  s390/mm,ptdump: add real memory copy page markers
  s390/mm: rework memcpy_real() to avoid DAT-off mode
  s390/dump: save IPL CPU registers once DAT is available
  s390/pci: convert high_memory to physical address
  s390/smp,ptdump: add absolute lowcore markers
  s390/smp: rework absolute lowcore access
  s390/smp: call smp_reinit_ipl_cpu() before scheduler is available
  s390/ptdump: add missing amode31 markers
  s390/mm: split lowcore pages with set_memory_4k()
  s390/mm: remove unused access parameter from do_fault_error()
  s390/delay: sync comment within __delay() with reality
  s390: move from strlcpy with unused retval to strscpy

Pull RISC-V updates from Palmer Dabbelt:

 - Improvements to the CPU topology subsystem, which fix some issues
   where RISC-V would report bad topology information.

 - The default NR_CPUS has increased to XLEN, and the maximum
   configurable value is 512.

 - The CD-ROM filesystems have been enabled in the defconfig.

 - Support for THP_SWAP has been added for rv64 systems.

There are also a handful of cleanups and fixes throughout the tree.

* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: enable THP_SWAP for RV64
  RISC-V: Print SSTC in canonical order
  riscv: compat: s/failed/unsupported if compat mode isn't supported
  RISC-V: Increase range and default value of NR_CPUS
  cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
  perf: RISC-V: throttle perf events
  perf: RISC-V: exclude invalid pmu counters from SBI calls
  riscv: enable CD-ROM file systems in defconfig
  riscv: topology: fix default topology reporting
  arm64: topology: move store_cpu_topology() to shared code

Pull microblaze updates from Michal Simek:
 "This adds architecture support for error injection which can be done
  only via local memory (BRAM) with enabling path for recovery after
  reset.

  These patches targets Triple Modular Redundacy (TMR) configuration
  where 3 Microblazes are running in parallel with monitoring logic.

  When an error happens (or is injected) system goes to break handler
  with full CPU reset and system recovery back to origin context. More
  information can be found at [1]"

Link: https://www.xilinx.com/content/dam/xilinx/support/documents/ip_documentation/tmr/v1_0/pg268-tmr.pdf [1]

* tag 'microblaze-v6.1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add support for error injection
  microblaze: Add custom break vector handler for mb manager
  microblaze: Add xmb_manager_register function

Pull kvm updates from Paolo Bonzini:
 "The first batch of KVM patches, mostly covering x86.

  ARM:

   - Account stage2 page table allocations in memory stats

  x86:

   - Account EPT/NPT arm64 page table allocations in memory stats

   - Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
     accesses

   - Drop eVMCS controls filtering for KVM on Hyper-V, all known
     versions of Hyper-V now support eVMCS fields associated with
     features that are enumerated to the guest

   - Use KVM's sanitized VMCS config as the basis for the values of
     nested VMX capabilities MSRs

   - A myriad event/exception fixes and cleanups. Most notably, pending
     exceptions morph into VM-Exits earlier, as soon as the exception is
     queued, instead of waiting until the next vmentry. This fixed a
     longstanding issue where the exceptions would incorrecly become
     double-faults instead of triggering a vmexit; the common case of
     page-fault vmexits had a special workaround, but now it's fixed for
     good

   - A handful of fixes for memory leaks in error paths

   - Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow

   - Never write to memory from non-sleepable kvm_vcpu_check_block()

   - Selftests refinements and cleanups

   - Misc typo cleanups

  Generic:

   - remove KVM_REQ_UNHALT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
  KVM: remove KVM_REQ_UNHALT
  KVM: mips, x86: do not rely on KVM_REQ_UNHALT
  KVM: x86: never write to memory from kvm_vcpu_check_block()
  KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
  KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
  KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
  KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
  KVM: x86: lapic does not have to process INIT if it is blocked
  KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
  KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
  KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
  KVM: x86: make vendor code check for all nested events
  mailmap: Update Oliver's email address
  KVM: x86: Allow force_emulation_prefix to be written without a reload
  KVM: selftests: Add an x86-only test to verify nested exception queueing
  KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
  KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
  KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
  KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
  KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
  ...

Pull EFI updates from Ard Biesheuvel:
 "A bit more going on than usual in the EFI subsystem. The main driver
  for this has been the introduction of the LoonArch architecture last
  cycle, which inspired some cleanup and refactoring of the EFI code.
  Another driver for EFI changes this cycle and in the future is
  confidential compute.

  The LoongArch architecture does not use either struct bootparams or DT
  natively [yet], and so passing information between the EFI stub and
  the core kernel using either of those is undesirable. And in general,
  overloading DT has been a source of issues on arm64, so using DT for
  this on new architectures is a to avoid for the time being (even if we
  might converge on something DT based for non-x86 architectures in the
  future). For this reason, in addition to the patch that enables EFI
  boot for LoongArch, there are a number of refactoring patches applied
  on top of which separate the DT bits from the generic EFI stub bits.
  These changes are on a separate topich branch that has been shared
  with the LoongArch maintainers, who will include it in their pull
  request as well. This is not ideal, but the best way to manage the
  conflicts without stalling LoongArch for another cycle.

  Another development inspired by LoongArch is the newly added support
  for EFI based decompressors. Instead of adding yet another
  arch-specific incarnation of this pattern for LoongArch, we are
  introducing an EFI app based on the existing EFI libstub
  infrastructure that encapulates the decompression code we use on other
  architectures, but in a way that is fully generic. This has been
  developed and tested in collaboration with distro and systemd folks,
  who are eager to start using this for systemd-boot and also for arm64
  secure boot on Fedora. Note that the EFI zimage files this introduces
  can also be decompressed by non-EFI bootloaders if needed, as the
  image header describes the location of the payload inside the image,
  and the type of compression that was used. (Note that Fedora's arm64
  GRUB is buggy [0] so you'll need a recent version or switch to
  systemd-boot in order to use this.)

  Finally, we are adding TPM measurement of the kernel command line
  provided by EFI. There is an oversight in the TCG spec which results
  in a blind spot for command line arguments passed to loaded images,
  which means that either the loader or the stub needs to take the
  measurement. Given the combinatorial explosion I am anticipating when
  it comes to firmware/bootloader stacks and firmware based attestation
  protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
  when it comes to EFI measured boot, which is that the kernel measures
  the initrd and command line. Intermediate loaders can measure
  additional assets if needed, but with the baseline in place, we can
  deploy measured boot in a meaningful way even if you boot into Linux
  straight from the EFI firmware.

  Summary:

   - implement EFI boot support for LoongArch

   - implement generic EFI compressed boot support for arm64, RISC-V and
     LoongArch, none of which implement a decompressor today

   - measure the kernel command line into the TPM if measured boot is in
     effect

   - refactor the EFI stub code in order to isolate DT dependencies for
     architectures other than x86

   - avoid calling SetVirtualAddressMap() on arm64 if the configured
     size of the VA space guarantees that doing so is unnecessary

   - move some ARM specific code out of the generic EFI source files

   - unmap kernel code from the x86 mixed mode 1:1 page tables"

* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
  efi: zboot: create MemoryMapped() device path for the parent if needed
  efi: libstub: fix up the last remaining open coded boot service call
  efi/arm: libstub: move ARM specific code out of generic routines
  efi/libstub: measure EFI LoadOptions
  efi/libstub: refactor the initrd measuring functions
  efi/loongarch: libstub: remove dependency on flattened DT
  efi: libstub: install boot-time memory map as config table
  efi: libstub: remove DT dependency from generic stub
  efi: libstub: unify initrd loading between architectures
  efi: libstub: remove pointless goto kludge
  efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
  efi: libstub: avoid efi_get_memory_map() for allocating the virt map
  efi: libstub: drop pointless get_memory_map() call
  efi: libstub: fix type confusion for load_options_size
  arm64: efi: enable generic EFI compressed boot
  loongarch: efi: enable generic EFI compressed boot
  riscv: efi: enable generic EFI compressed boot
  efi/libstub: implement generic EFI zboot
  efi/libstub: move efi_system_table global var into separate object
  ...

Pull mailbox updates from Jassi Brar:

 - apple: implement poll and flush callbacks

 - qcom: fix clocks for IPQ6018 and IPQ8074 irq handler as not-a-thread

 - microchip: split reg-space into two

 - imx: RST channel fix

 - bcm: fix dma_map_sg error handling

 - misc: spelling fix in pcc driver

* tag 'mailbox-v6.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom-ipcc: flag IRQ NO_THREAD
  mailbox: pcc: Fix spelling mistake "Plaform" -> "Platform"
  mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
  mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support
  dt-bindings: mailbox: qcom: correct clocks for IPQ6018 and IPQ8074
  dt-bindings: mailbox: qcom: set correct #clock-cells
  mailbox: mpfs: account for mbox offsets while sending
  mailbox: mpfs: fix handling of the reg property
  dt-bindings: mailbox: fix the mpfs' reg property
  mailbox: imx: fix RST channel support
  mailbox: apple: Implement poll_data() operation
  mailbox: apple: Implement flush() operation

Pull clk updates from Stephen Boyd:
 "We have some late breaking reports that a patch series to rework clk
  rate range support broke boot on some devices, so I've left that
  branch out of this. Hopefully we can get to that next week, or punt on
  it and let it bake another cycle. That means we don't really have any
  changes to the core framework this time around besides a few typo
  fixes. Instead this is all clk driver updates and fixes.

  The usual suspects are here (again), with Qualcomm dominating the
  diffstat. We look to have gained support for quite a few new Qualcomm
  SoCs and Dmitry worked on updating many of the existing Qualcomm
  drivers to use clk_parent_data. After that we have MediaTek drivers
  getting some much needed updates, in particular to support GPU DVFS.
  There are also quite a few Samsung clk driver patches, but that's
  mostly because there was a maintainer change and so last release we
  missed some of those patches.

  Overall things look normal, but I'm slowly reviewing core framework
  code nowadays and that shows given the rate range patches had to be
  yanked last minute. Let's hope this situation changes soon.

  New Drivers:
   - Support for Renesas VersaClock7 clock generator family
   - Add Spreadtrum UMS512 SoC clk support
   - New clock drivers for MediaTek Helio X10 MT6795
   - Display clks for Qualcomm SM6115, SM8450
   - GPU clks for Qualcomm SC8280XP
   - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

  Deleted Drivers:
   - Remove DaVinci DM644x and DM646x clk driver support

  Updates:
   - Convert Baikal-T1 CCU driver to platform driver
   - Split reset support out of primary Baikal-T1 CCU driver
   - Add some missing clks required for RPiVid Video Decoder on
     RaspberryPi
   - Mark PLLC critical on bcm2835
   - More devm helpers for fixed rate registration
   - Various PXA168 clk driver fixes
   - Add resets for MediaTek MT8195 PCIe and USB
   - Miscellaneous of_node_put() fixes
   - Nuke dt-bindings/clk path (again) by moving headers to
     dt-bindings/clock
   - Convert gpio-clk-gate binding to YAML
   - Various fixes to AMD/Xilinx Zynqmp clk driver
   - Graduate AMD/Xilinx "clocking wizard" driver from staging
   - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
   - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
   - Fix GPU clock topology on MT8195
   - Propogate rate changes from GPU clock gate up the tree
   - Clock mux notifiers for GPU-related PLLs
   - Conversion of more "simple" drivers to mtk_clk_simple_probe()
   - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
   - Fixes to previous |struct clk| to |struct clk_hw| conversion on
     MediaTek
   - Shrink MT8192 clock driver by deduplicating clock parent lists
   - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
     clocks for i.MX8MP
   - Drop unnecessary newline in i.MX8MM dt-bindings
   - Add more MU1 and SAI clocks dt-bindings Ids
   - Introduce slice busy bit check for i.MX93 composite clock
   - Introduce white list bit check for i.MX93 composite clock
   - Add new i.MX93 clock gate
   - Add MU1 and MU2 clocks to i.MX93 clock provider
   - Add SAI IPG clocks to i.MX93 clock provider
   - add generic clocks for U(S)ART available on SAMA5D2 SoCs
   - reset controller support for Polarfire clocks
   - .round_rate and .set rate support for clk-mpfs
   - code cleanup for clk-mpfs
   - PLL support for PolarFire SoC's Clock Conditioning Circuitry
   - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
     V4H
   - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
   - Add I2C clocks and resets on RZ/V2M
   - Document clock support for the RZ/Five SoC
   - mux-variant clock using the table variant to select parents
   - clock controller for the rv1126 soc
   - conversion of rk3128 to yaml and relicensing of the yaml bindings
     to gpl2+MIT (following dt-binding guildelines)
   - Exynos7885: add FSYS, TREX and MFC clock controllers
   - Exynos850: add IS and AUD (audio) clock controllers with bindings
   - ExynosAutov9: add FSYS clock controllers with bindings
   - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
     controllers, due to duplicated entries. This is an acceptable ABI
     break: recently developed/added platform so without legacies, acked
     by known users/developers
   - ExynosAutov9: add few missing Peric 0/1 gates
   - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
   - Minor code improvements (use of_device_get_match_data() helper,
     code style)
   - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
     he already maintainers that architecture/platform
   - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
     retention issues during suspend of USB on Qualcomm sc7180/sc7280
     and SC8280XP
   - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
   - Qualcomm SDM660 SDCC1 moved to floor clk ops
   - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
     was added/fixed
   - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
   - Support for Qualcomm SDM670 GCC and RPMh clks was added
   - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
     num_parents was done for many Qualcomm SoCs
   - Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: ast2600: BCLK comes from EPLL
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: nxp: fix typo in comment
  clk: pxa: add a check for the return value of kzalloc()
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have a single new driver, support for a bunch of new models,
  improvements in drivers and core gpiolib code as well device-tree
  bindings changes.

  Summary:

  New driver:
   - IMX System Controller Unit GPIOs

  GPIO core:
   - add fdinfo output for the GPIO character device file descriptors
     (allows user-space to determine which processes own which GPIO
     lines)
   - improvements to OF GPIO code
   - new quirk for Asus UM325UAZ in gpiolib-acpi
   - new quirk for Freescale SPI in gpiolib-of

  Driver improvements:
   - add a new macro that reduces the amount of boilerplate code in ISA
     drivers and use it in relevant drivers
   - support two new models in gpio-pca953x
   - support new model in gpio-f7188x
   - convert more drivers to use immutable irq chips
   - other minor tweaks

  Device-tree bindings:
   - add DT bindings for gpio-imx-scu
   - convert Xilinx GPIO bindings to YAML
   - reference the properties from the SPI peripheral device-tree
     bindings instead of providing custom ones in the GPIO controller
     document
   - add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio
   - relax the node name requirements in gpio-stmpe
   - add new models for gpio-rcar and gpio-pxa95xx
   - add a new vendor prefix: Diodes (for Diodes, Inc.)

  Misc:
   - pulled in the immutable branch from the x86 platform drivers tree
     including support for a new simatic board that depends on GPIO
     changes"

* tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (36 commits)
  gpio: tc3589x: Make irqchip immutable
  gpiolib: cdev: add fdinfo output for line request file descriptors
  gpio: twl4030: Reorder functions which allows to drop a forward declaraion
  gpiolib: fix OOB access in quirk callbacks
  gpiolib: of: factor out conversion from OF flags
  gpiolib: rework quirk handling in of_find_gpio()
  gpiolib: of: make Freescale SPI quirk similar to all others
  gpiolib: of: do not ignore requested index when applying quirks
  gpio: ws16c48: Ensure number of irq matches number of base
  gpio: 104-idio-16: Ensure number of irq matches number of base
  gpio: 104-idi-48: Ensure number of irq matches number of base
  gpio: 104-dio-48e: Ensure number of irq matches number of base
  counter: 104-quad-8: Ensure number of irq matches number of base
  isa: Introduce the module_isa_driver_with_irq helper macro
  gpio: pca953x: Add support for PCAL6534
  gpio: pca953x: Swap if statements to save later complexity
  gpio: pca953x: Fix pca953x_gpio_set_pull_up_down()
  dt-bindings: gpio: pca95xx: add entry for pcal6534 and PI4IOE5V6534Q
  dt-bindings: vendor-prefixes: add Diodes
  gpio: mt7621: Switch to use platform_get_irq() function
  ...

Pull staging driver updates from Greg KH:
 "Here is the large set of staging driver changes for 6.1-rc1.

  Nothing really interesting in here at all except we deleted a driver
  (fwserial) as no one had been using it for a long time. Other than
  that, just the normal cleanups and minor fixes:

   - rtl8723bs driver cleanups

   - loads of r8188eu driver cleanups, making the driver smaller and
     fixing up some firmware dependency issues.

   - vt6655 driver cleanups.

   - lots of other small staging driver cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (266 commits)
  staging: rtl8192e: Rename variable Bandwidth to avoid CamelCase
  staging: r8188eu: remove PHY_RFConfig8188E()
  staging: r8188eu: remove PHY_RF6052_Config8188E()
  staging: r8188eu: convert ODM_ReadAndConfig_AGC_TAB_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_PHY_REG_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_RadioA_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_MAC_REG_8188E() to int
  staging: rtl8192e: cmdpkt: Use skb_put_data() instead of skb_put/memcpy pair
  staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pair
  staging: r8188eu: remove hal/odm_RegConfig8188E.c
  staging: r8188eu: make odm_ConfigRF_RadioA_8188E() static
  staging: r8188eu: make odm_ConfigMAC_8188E() static
  staging: r8188eu: don't check for stop/removal in the blink worker
  staging: r8188eu: don't check bSurpriseRemoved in SwLedOff
  staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ...
  staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU...
  staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGI
  staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFunc
  staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr...
  staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo...
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...

Pull driver core updates from Greg KH:
 "Here is the big set of driver core and debug printk changes for
  6.1-rc1. Included in here is:

   - dynamic debug updates for the core and the drm subsystem. The drm
     changes have all been acked by the relevant maintainers

   - kernfs fixes for syzbot reported problems

   - kernfs refactors and updates for cgroup requirements

   - magic number cleanups and removals from the kernel tree (they were
     not being used and they really did not actually do anything)

   - other tiny cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
  docs: filesystems: sysfs: Make text and code for ->show() consistent
  Documentation: NBD_REQUEST_MAGIC isn't a magic number
  a.out: restore CMAGIC
  device property: Add const qualifier to device_get_match_data() parameter
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: optimize drm_debug_enabled for jump-label
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print.h: include dyndbg header
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm_print: interpose drm_*dbg with forwarding macros
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: condense enum drm_debug_category
  debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
  driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
  Documentation: ENI155_MAGIC isn't a magic number
  Documentation: NBD_REPLY_MAGIC isn't a magic number
  nbd: remove define-only NBD_MAGIC, previously magic number
  Documentation: FW_HEADER_MAGIC isn't a magic number
  Documentation: EEPROM_MAGIC_VALUE isn't a magic number
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

Pull soundwire updates from Vinod Koul:
 "Updates for Intel, Cadence and Qualcomm drivers:

   - another round of Intel driver cleanup to prepare for future code
     reorg which is expected in next cycle (Pierre-Louis Bossart)

   - bus unattach notifications processing during re-enumeration along
     with Cadence driver updates for this (Richard Fitzgerald)

   - Qualcomm driver updates to handle device0 status (Srinivas
     Kandagatla)"

* tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits)
  soundwire: intel: add helper to stop bus
  soundwire: intel: introduce helpers to start bus
  soundwire: intel: introduce intel_shim_check_wake() helper
  soundwire: intel: simplify read ops assignment
  soundwire: intel: remove intel_init() wrapper
  soundwire: intel: move shim initialization before power up/down
  soundwire: intel: remove clock_stop parameter in intel_shim_init()
  soundwire: intel: move all PDI initialization under intel_register_dai()
  soundwire: intel: move DAI registration and debugfs init earlier
  soundwire: intel: simplify flow and use devm_ for DAI registration
  soundwire: intel: fix error handling on dai registration issues
  soundwire: cadence: Simplify error paths in cdns_xfer_msg()
  soundwire: cadence: Fix error check in cdns_xfer_msg()
  soundwire: cadence: Write to correct address for each FIFO chunk
  soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
  soundwire: qcom: do not send status of device 0 during alert
  soundwire: qcom: update status from device id 1
  soundwire: cadence: Don't overwrite msg->buf during write commands
  soundwire: bus: Don't exit early if no device IDs were programmed
  soundwire: cadence: Fix lost ATTACHED interrupts when enumerating
  ...

Pull phy updates from Vinod Koul:
 "This contains bunch of new device support and one new Sunplus driver
  along with updates which include another big round of qmp phy
  conversion.

  New support:
   - Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson)
   - Rockchip rk3568 inno dsidphy (Chris Morgan)
   - ocelot-serdes phy yaml binding (Colin Foster)
   - Renesas gen2-usb phy yaml binding (Geert Uytterhoeven)
   - RGMII suport in lan966x driver (Horatiu Vultur)
   - Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio)
   - Rockchip rk356x csi-dphya (Michael Riesch)
   - Qualcomm sdm670 usb2 bindings (Richard Acayan)
   - Sunplus USB2 PHY (Vincent Shih)

  Updates:
   - Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers
     (Chunfeng Yun)
   - Continued Qualcomm qmp phy driver split and cleanup. More patches
     are under review and expected that next cycle might see completion
     of this activity (Dmitry Baryshkov & Johan Hovold)
   - TI wiz driver support for j7200 10g (Roger Quadros)
   - Qualcomm femto phy driver support for override params to help with
     tuning (Sandeep Maheswaram)
   - SGMII support in TI wiz driver (Siddharth Vadapalli)
   - dev_err_probe simplification (Yuan Can)"

* tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits)
  phy: phy-mtk-dp: make array driving_params static const
  dt-bindings: phy: qcom,qusb2: document sdm670 compatible
  phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY
  phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588
  phy: tegra: xusb: Enable usb role switch attribute
  phy: mediatek: fix build warning of FIELD_PREP()
  phy: qcom-qmp-usb: Use dev_err_probe() to simplify code
  phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code
  phy: qcom-qmp-combo: Use dev_err_probe() to simplify code
  phy: qualcomm: call clk_disable_unprepare in the error handling
  phy: intel: Use dev_err_probe() to simplify code
  phy: tegra: xusb: Use dev_err_probe() to simplify code
  phy: qcom-snps: Use dev_err_probe() to simplify code
  phy: qcom-qusb2: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code
  phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe()
  phy: mediatek: mipi: remove register access helpers
  phy: mediatek: mipi: mt8183: use common helper to access registers
  phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask
  ...

Pull dmaengine updates from Vinod Koul:
 "New Support:

   - MT6795 SoC dma controller (AngeloGioacchino Del Regno)

   - qcom-adm controller yaml binding (Christian Marangi)

   - Renesas r8a779g0 dma controller yaml binding (Geert Uytterhoeven)

   - Qualcomm SM6350 GPI dma controller (Luca Weiss)

  Updates:

   - STM32 DMA-MDMA chaining support (Amelie Delaunay)

   - make hsu driver use managed resources (Andy Shevchenko)

   - the usual round of idxd driver updates (Dave Jiang & Jerry
     Snitselaar)

   - apple dma driver iommu and pd properties and remove use
     of devres for irqs (Janne Grunau & Martin Povišer)

   - device_synchronize support for Xilinx zynqmp driver (Swati
     Agarwal)"

* tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dmaengine: ioat: remove unused declarations in dma.h
  dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requested
  dmaengine: zynqmp_dma: Add device_synchronize support
  dt-bindings: dma: add additional pbus reset to qcom,adm
  dt-bindings: dma: rework qcom,adm Documentation to yaml schema
  dt-bindings: dma: apple,admac: Add iommus and power-domains properties
  dmaengine: dw-edma: Remove runtime PM support
  dmaengine: idxd: add configuration for concurrent batch descriptor processing
  dmaengine: idxd: add configuration for concurrent work descriptor processing
  dmaengine: idxd: add WQ operation cap restriction support
  dmanegine: idxd: reformat opcap output to match bitmap_parse() input
  dmaengine: idxd: convert ats_dis to a wq flag
  dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
  dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg
  dmaengine: qcom-adm: fix wrong sizeof config in slave_config
  dmaengine: ti: k3-psil: add additional TX threads for j721e
  dmaengine: ti: k3-psil: add additional TX threads for j7200
  dmaengine: apple-admac: Trigger shared reset
  dmaengine: apple-admac: Do not use devres for IRQs
  dmaengine: ti: edma: Remove some unused functions
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
  mpt3sas, target). The biggest change (from my biased viewpoint) being
  that the mpi3mr now attached to the SAS transport class, making it the
  first fusion type device to do so.

  Beyond the usual bug fixing and security class reworks, there aren't a
  huge number of core changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
  scsi: mpi3mr: Remove unnecessary cast
  scsi: stex: Properly zero out the passthrough command structure
  scsi: mpi3mr: Update driver version to 8.2.0.3.0
  scsi: mpi3mr: Fix scheduling while atomic type bug
  scsi: mpi3mr: Scan the devices during resume time
  scsi: mpi3mr: Free enclosure objects during driver unload
  scsi: mpi3mr: Handle 0xF003 Fault Code
  scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
  scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
  scsi: mpi3mr: Support new power management framework
  scsi: mpi3mr: Update mpi3 header files
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
  scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
  scsi: core: Add I/O timeout count for SCSI device
  scsi: qedf: Populate sysfs attributes for vport
  scsi: pm8001: Replace one-element array with flexible-array member
  scsi: 3w-xxxx: Replace one-element array with flexible-array member
  scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
  ...

Pull rdma updates from Jason Gunthorpe:
 "Not a big list of changes this cycle, mostly small things. The new
  MANA rdma driver should come next cycle along with a bunch of work on
  rxe.

  Summary:

   - Small bug fixes in mlx5, efa, rxe, hns, irdma, erdma, siw

   - rts tracing improvements

   - Code improvements: strlscpy conversion, unused parameter, spelling
     mistakes, unused variables, flex arrays

   - restrack device details report for hns

   - Simplify struct device initialization in SRP

   - Eliminate the never-used service_mask support in IB CM

   - Make rxe not print to the console for some kinds of network packets

   - Asymetric paths and router support in the CM through netlink
     messages

   - DMABUF importer support for mlx5devx umem's"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (84 commits)
  RDMA/rxe: Remove error/warning messages from packet receiver path
  RDMA/usnic: fix set-but-not-unused variable 'flags' warning
  IB/hfi1: Use skb_put_data() instead of skb_put/memcpy pair
  RDMA/hns: Unified Log Printing Style
  RDMA/hns: Replacing magic number with macros in apply_func_caps()
  RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
  RDMA/hns: Remove redundant 'max_srq_desc_sz' in caps
  RDMA/hns: Remove redundant 'num_mtt_segs' and 'max_extend_sg'
  RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt()
  RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table()
  RDMA/hns: Remove redundant 'bt_level' for hem_list_alloc_item()
  RDMA/hns: Remove redundant 'attr_mask' in modify_qp_init_to_init()
  RDMA/hns: Remove unnecessary brackets when getting point
  RDMA/hns: Remove unnecessary braces for single statement blocks
  RDMA/hns: Cleanup for a spelling error of Asynchronous
  IB/rdmavt: Add __init/__exit annotations to module init/exit funcs
  RDMA/rxe: Remove redundant num_sge fields
  RDMA/mlx5: Enable ATS support for MRs and umems
  RDMA/mlx5: Add support for dmabuf to devx umem
  RDMA/core: Add UVERBS_ATTR_RAW_FD
  ...

Pull MTD updates from Miquel Raynal:
 "Core MTD changes:
   - mtdchar: add MEMREAD ioctl
   - Add ECC error accounting for each read request
   - always initialize 'stats' in struct mtd_oob_ops
   - Track maximum number of bitflips for each read request
   - Fix repeated word in comment
   - Move from strlcpy with unused retval to strscpy
   - Fix a typo in a comment
   - Add binding for U-Boot bootloader partitions

  MTD device drivers changes:
   - FTL: use container_of() rather than cast
   - docg3:
      - Use correct function names in comment blocks
      - Check the return value of devm_ioremap() in the probe
   - physmap-core: Fix NULL pointer dereferencing in
     of_select_probe_type()
   - parsers: add Broadcom's U-Boot parser

  Raw NAND core changes:
   - Replace of_gpio_named_count() by gpiod_count()
   - Remove misguided comment of nand_get_device()
   - bbt: Use the bitmap API to allocate bitmaps

  Raw NAND controller drivers changes:
   - Meson:
      - Stop supporting legacy clocks
      - Refine resource getting in probe
      - Convert bindings to yaml
      - Fix clock handling and update the bindings accordingly
      - Fix bit map use in meson_nfc_ecc_correct()
   - bcm47xx:
      - Fix spelling typo in comment
   - STM32 FMC2:
      - Switch to using devm_fwnode_gpiod_get()
      - Fix dma_map_sg error check
   - Cadence:
      - Remove an unneeded result variable
   - Marvell:
      - Fix error handle regarding dma_map_sg
   - Orion:
      - Use devm_clk_get_optional()
   - Cafe:
      - Use correct function name in comment block
   - Atmel:
      - Unmap streaming DMA mappings
   - Arasan:
      - Stop using 0 as NULL pointer
   - GPMI:
      - Fix typo 'the the' in comment
   - BRCM:
      - Add individual glue driver selection
      - Move Kconfig to driver folder
   - FSL: Fix none ECC mode
   - Intel:
      - Use devm_platform_ioremap_resource_byname()
      - Remove unused clk_rate member from struct ebu_nand
      - Remove unused nand_pa member from ebu_nand_cs
      - Don't re-define NAND_DATA_IFACE_CHECK_ONLY
      - Remove undocumented compatible string
      - Fix compatible string in the bindings
      - Read the chip-select line from the correct OF node
      - Fix maximum chip select value in the bindings"

* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
  mtd: rawnand: meson: stop supporting legacy clocks
  dt-bindings: nand: meson: convert txt to yaml
  mtd: rawnand: meson: refine resource getting in probe
  mtd: rawnand: meson: fix the clock
  dt-bindings: nand: meson: fix meson nfc clock
  mtd: rawnand: bcm47xx: fix spelling typo in comment
  mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
  mtd: rawnand: cadence: Remove an unneeded result variable
  mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
  mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
  mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
  mtd: rawnand: remove misguided comment of nand_get_device()
  mtd: rawnand: orion: Use devm_clk_get_optional()
  mtd: rawnand: cafe: Use correct function name in comment block
  mtd: rawnand: atmel: Unmap streaming DMA mappings
  mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
  mtd: rawnand: arasan: stop using 0 as NULL pointer
  mtd: rawnand: gpmi: Fix typo 'the the' in comment
  mtd: rawnand: brcmnand: Add individual glue driver selection
  mtd: rawnand: brcmnand: Move Kconfig to driver folder
  ...