- 20 May, 2015 11 commits
-
-
Hans Verkuil authored
vb2_buffer_done() already allows STATE_QUEUED, but currently only when not streaming. It is useful to allow it while streaming as well, as this makes it possible for drivers to requeue buffers while waiting for a stable video signal. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Hans Verkuil authored
Replace the dummy video format operations by pad format operations that configure the output format. Copied from the adv7604 driver. Note: while arch/blackfin/mach-bf609/boards/ezkit.c uses adv7842_platform_data this source has not been updated because it is broken since the very beginning. It depends on a struct adv7842_output_format that does not exist. And besides that gcc has no support for bf609 so nobody can compile it except by installing a toolchain from ADI. Signed-off-by:
-
Patrick Boettcher authored
Remove multiple blank likes. Signed-off-by:
Patrick Boettcher <patrick.boettcher@posteo.de> Signed-off-by:
-
Jemma Denson authored
These state vars are used for more than just ber calculation, also fix typo. Signed-off-by:
Jemma Denson <jdenson@gmail.com> Signed-off-by:
-
Jemma Denson authored
BER & UCB aren't available unless we're locked; don't update dvbv5 stats when not locked and mark these counters as unavailable. Signed-off-by:
-
Jemma Denson authored
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support modern applications. So, implement UCB using dvbv5. Signed-off-by:
-
Jemma Denson authored
Instead of reading BER again for DVBv3 call, use the value from the cache. Signed-off-by:
-
Jemma Denson authored
DVBv3 is a legacy API. Drivers should use DVBv5, in order to support modern applications. So, implement BER using dvbv5. Signed-off-by:
-
Mauro Carvalho Chehab authored
Use const on the static data, as gcc may optimize better the code. Also, would prevent that some code would override the data there. Signed-off-by:
-
Mauro Carvalho Chehab authored
drivers/media/dvb-frontends/cx24120.c:1182:5: warning: no previous prototype for 'cx24120_init' [-Wmissing-prototypes] int cx24120_init(struct dvb_frontend *fe) ^ Signed-off-by: -
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/dvb-frontends/cx24120.c: In function 'cx24120_message_send': drivers/media/dvb-frontends/cx24120.c:368:6: warning: variable 'ret' set but not used [-Wunused-but-set-variable] int ret, ficus; ^ The values written by cx24120 are never checked. So, remove the check here too. That's said, the best would be to do the reverse, but globally: to properly handle the error codes. Signed-off-by:
-
- 19 May, 2015 1 commit
-
-
Jemma Denson authored
Add in all the likely values for setting fec on tuning. Some values yet to be tested but very likely to be correct. In the very unlikely event that these are wrong tuning with FEC_AUTO will still work. Signed-off-by:
-
- 18 May, 2015 28 commits
-
-
Jemma Denson authored
If set, all the other drivers reset no_base_addr on failure to attach - git commit for this being added to some of them seems to be eccd15aa This driver has been floating around outside the mainline for so long it hasn't had this fix, so add it in. Whilst here tidy surrounding code to fix style issues. Signed-off-by:
-
Jemma Denson authored
Remove reg1 by refactoring for loops Change ret into an int as it's only used for return values now, and remove reset_result by using ret instead. Signed-off-by:
-
Jemma Denson authored
Use reg instead of ret for all calls to readreg, remove ret_EA as it doesn't need to be a separate var anymore. Signed-off-by:
-
Jemma Denson authored
Probably a remnant of this driver being reverse engineered, cx24120_init assigned ret on each call to writereg - they're not used for anything so remove them to clear up the codebase. Signed-off-by:
-
Jemma Denson authored
Remove __func__ from calls to dev_dbg as dynamic debug can add in the function name anyway. Remove debug call in dvbv3 read_signal_strength as userspace has this value anyway. Reword some strings to make them simpler / more obvious. Signed-off-by:
-
Jemma Denson authored
Better to report CNR via DVBv5 stats, as scale can be used. Signed-off-by:
-
Jemma Denson authored
Previous version of this driver had a memset before every call to cmd. This meant the default value of cmd.arg[1] was zero unless burst is set. Make sure it remains zero. Also fe_sec_mini_cmd_t is an enum, so test against it. Signed-off-by:
-
Jemma Denson authored
Signed-off-by:
-
Jemma Denson authored
Algorithm copied from cx24117.c - it seems to work. Showing 95% on a signal I know to be somewhere around 74dBuV. [mchehab@osg.samsung.net: merged two patches, to avoid breaking compilation] Signed-off-by:
-
Jemma Denson authored
This patch changes DVBv3 signal strength to read from the cache by moving the signal strength reading routine into get_stat, and reducing read_signal_strength to just returning the cached value. Signed-off-by:
-
Jemma Denson authored
get_frontend was making a call to read_status, which is being called periodically anyway. Have read_status store fe_status in the state struct instead and use that within get_frontend. Signed-off-by:
-
Jemma Denson authored
Previous patch added in collection, this patch enables them by signalling they are available. Signed-off-by:
-
Jemma Denson authored
Add new get_stats function, called from read_status, for collecting DVBv5 stats into the frontend cache. Only signal strength for now, can add others later. Not currently marked as available, future patch will enable. Signed-off-by:
-
Jemma Denson authored
Change calculate_vco function to send_vco to tidy up cx24120_init function. xxyyzz variable is remnants of a manual div & remainder codepath to perform a u64 rounded div; replace with kernel macro DIV_ROUND_CLOSEST_ULL Hex values provided to the message are mainly variables calculated within this function, replace with these to remove hardcoding. Signed-off-by:
-
Jemma Denson authored
msg.len has been ++'d so msg.len is one too many. Signed-off-by:
-
Jemma Denson authored
This patch adds in a missing command to cx24120_check_cmd. This part of the old reverse engineered driver was quite hard to follow - it's presumed the compiler did some neat optimisation that wasn't easy to decode. This command was checked for in that version but not copied across to the new switch statement. For reference, old reverse engineered code: xxzz = cmd->id - 0x11; // look for specific message id if ( xxzz <= 0x13 ) { msg_cmd_mask = 1 << xxzz; //0x0F8021 // if cmd_id 17 or 22 or 33-36, 42, 47, 57-61 etc. disable mpeg output if ( msg_cmd_mask & 0x0F8021 ) { // 000011111000000000100001b cx24120_msg_mpeg_output_global_config(state, 0); msleep(100); state->dvb_s2_mode &= 0xFD; // reset mpeg out enable flag } } Signed-off-by: -
Jemma Denson authored
This patch removes the requirement of waiting for tune in set_frontend by moving the clock set call into read_status Signed-off-by:
-
Jemma Denson authored
This patch changes DVB-S/DVB-S2 to the more commonly used DVB-S/S2 in the description for DVB_CX24120 Signed-off-by:
-
Patrick Boettcher authored
This patches fixes all checkpatch-errors. Even the ones created --strict. Signed-off-by:
-
Patrick Boettcher authored
Mauro pointed out some coding style issues in his review. This patch fixes them. Signed-off-by:
-
Patrick Boettcher authored
Add maintainer for the cx24120 frontend-driver. Signed-off-by:
-
Patrick Boettcher authored
Some i2c-hosts are quite limited regarding maximum i2c-burst-write-sizes. This patch makes the previously hardcoded field configurable by users of the driver. Signed-off-by:
-
Patrick Boettcher authored
This patch fixes printk-related checkpatch warnings. All printks have been converted to pr_warn or pr_info or pr_err. Signed-off-by:
-
Jemma Denson authored
This patch adds support for the Technisat Skystar S2 - this has been tried before but the cx24120 driver was a bit out of shape and it didn't got any further: https://patchwork.linuxtv.org/patch/10575/ It is an old card, but currently being sold off for next to nothing, so it's proving quite popular of late. Noticing it's quite similar to the cx24116 and cx24117 I've rewritten the driver in a similar way. There were a few registers and commands from those drivers missing from this one I've tested out and found they do something so they've been added in to speed up tuning and to make get_frontend return something useful. Signed-off-by:
-
Hans Verkuil authored
Missing varlistentry tags. Signed-off-by:
-
Hans Verkuil authored
Explain which clock was used to make the timestamp. Signed-off-by:
-
Hans Verkuil authored
Looks ugly, a space before a period at the end of a sentence. Remove it. Signed-off-by:
-
Hans Verkuil authored
Even though the rcar-vin driver tells userspace that it will give a monotonic timestamp, it is actually using gettimeofday. Replace this with a proper monotonic timestamp. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
