There is a need to allow to user to send command submissions with
custom timeout as some CS take longer than the max timeout that is
used by default.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The new approach is based on the notion that the relative
current power consumption is in relation of proportionality
to device's true utilization.
Utilization info ranges between [0,100]%
Currently, dc_power values are hard-coded.
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to use minimum of hard coded values common to LKD and F/W
a dynamic method to work with PLLs is introduced in this patch.
Formerly asic specific PLL numbering is now common for all asics.
To be backward compatible a bit in dev status is defined, if the bit is
not set LKD will keep working with old PLL numbering.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to shorten the time cs lock is being held, we move any
possible work outside of the cs lock.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add a little sleep between page unmappings in case mapping of
large number of host pages failed, in order to
avoid soft lockup bug during the rollback.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update with latest version from the Firmware team.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Unsecure relevant registers as TPC engine need access to
TPC status.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device can get into deadlock in case it use indirect mode for MSI
interrupts (multi-msi) and have hard-reset during interrupt storm.

To prevent that, always use direct mode which means single-msi mode.

The F/W will prevent the host from writing to the indirect MSI
registers to prevent any malicious user from causing this scenario.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In case the BMC of the devices' box wants to initiate a reset of
a specific device, it must go through driver.
Once driver will receive the request it will initiate a hard reset
flow.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to have a better debuggability we allow debugfs access
to user mmu mapped host memory. Non-user host memory access will be
rejected.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

fixed the following coccicheck:
./drivers/misc/habanalabs/common/sysfs.c:347:60-61: WARNING opportunity
for kobj_to_dev()
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update to the latest version of the file as supplied by the F/W.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

if reset is due to heartbeat, device CPU is no responsive in which
case no point sending PCI disable message to it.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As there are incorrect assumptions in which some of the
initialization and data path flows cannot sleep, most allocations
are being done using GFP_ATOMIC.
We modify the code to use GFP_ATOMIC only when realy needed, as
sleepable flow should use GFP_KERNEL.
In addition add a fallback to allocate memory using GFP_KERNEL,
once ATOMIC allocation fails.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Update to the latest definition of the firmware
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Add driver implementation for reading the current power from the device
CPU F/W.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Improve "vm" debugfs node to print also the virtual addresses which are
currently mapped to HW blocks in the device.
Signed-off-by: Sagiv Ozeri <sozeri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

For simplicity, use a single bringup flag indicating which FW
binaries should loaded to device.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Timeout in wait for interrupt is in 32-bit variable so we need to use
the correct maximum value to compare.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to support command submissions from user space, the driver
need to add support for user interrupt completions. The driver will
allow multiple user threads to wait for an interrupt and perform
a comparison with a given user address once interrupt expires.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to support user interrupts, driver must enable all MSI-X
interrupts for any case user will trigger them. We differentiate
between a valid user interrupt and a non valid one.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As the F/wW is the first to detect out of sync event, a new event is
added to notify the driver on such event. In which case the driver
performs hard reset.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Because our graph contains network operations, we need to account
for delay in the network.

5 seconds timeout per CS is not enough to account for that.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Notify to the user that although he closed the FD, the device is
still in use because there are live CS and/or memory mappings (mmaps).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Move the field to correct location in structure and remove comment.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

After any reset (soft or hard) the device (the engines/QMANs) should
be idle. If they are not idle, fail the reset. If it is soft-reset,
the driver will try to do hard-reset automatically. If it is hard-reset,
the driver will make the device non-operational.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The device is actually released only after the refcnt of the hpriv
structure is 0, which means all its contexts were closed.

If we reset the device while a context is still open, there are
possibilities for unexpected behavior and crashes. For example, if the
process has a mapping of a register block that is now currently being
reset, and the process writes/reads to that block during the reset,
the device can get stuck.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In order to support command submissions that are done directly from
user space, the driver must perform soft reset once user closes its FD.
In case the soft reset fails or device is not idle, a hard reset should
be performed.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

currently we support only 2 asids in all asics.
asid 0 for driver, and asic 1 for user.
no need to setup 1024 asids configurations at init phase.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.13

Detailed description for this pull request:

1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c

- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c

- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.

* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: qcom-spmi: Add support for VBUS detection
  bindings: pm8941-misc: Add support for VBUS detection
  bindings: pm8941-misc: Convert bindings to YAML
  extcon: sm5502: Detect OTG when USB_ID is connected to ground
  extcon: max8997: Add CHGINS and CHGRM interrupt handling

Merge tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga into char-misc-next

Moritz writes:

Second set of FPGA Manager changes for 5.13-rc1

FPGA Manager:
- Russ' first change improves port_enable reliability
- Russ' second change adds a new device ID for a DFL device
- Geert's change updates the examples in binding with dt overlay sugar
  syntax

All patches have been reviewed on the mailing list, and have been in the
last linux-next releases (as part of my for-next branch) without issues.
Signed-off-by: Moritz Fischer <mdf@kernel.org>

* tag 'fpga-late-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/mdf/linux-fpga:
  fpga: dfl: pci: add DID for D5005 PAC cards
  dt-bindings: fpga: fpga-region: Convert to sugar syntax
  fpga: dfl: afu: harden port enable logic
  fpga: Add support for Xilinx DFX AXI Shutdown manager
  dt-bindings: fpga: Add compatible value for Xilinx DFX AXI shutdown manager
  fpga: xilinx-pr-decoupler: Simplify code by using dev_err_probe()
  fpga: fpga-mgr: xilinx-spi: fix error messages on -EPROBE_DEFER

VBUS can be detected via a dedicated PMIC pin. Add support
for reporting the VBUS status.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Kavya Nunna <knunna@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Add interrupt support for reporting VBUS detection status that can be
detected via a dedicated PMIC pin.
Signed-off-by: Anirudh Ghayal <aghayal@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Convert bindings from txt to YAML.
Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

In it's curent state this driver ignores OTG adapters with ID pin
connected to ground. This commit adds a check to set extcon into
host mode when such OTG adapter is connected.
Signed-off-by: Nikita Travkin <nikitos.tr@gmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

This allows the MAX8997 charger to set the current limit depending on
the detected extcon charger type.
Signed-off-by: Timon Baetz <timon.baetz@protonmail.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>

Adding CoreSight headers to the list of supported files so that maintainers
can be notified when changes are submitted.

Link: https://lore.kernel.org/r/20210326155431.2011889-1-mathieu.poirier@linaro.orgSigned-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Link: https://lore.kernel.org/r/20210407160007.418053-5-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the following checkpatch warning:
WARNING: 'compoment' may be misspelled - perhaps 'component'?

Link: https://lore.kernel.org/r/1616487086-50418-1-git-send-email-liuqi115@huawei.comSigned-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-4-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The sparse tool complains as follows:

drivers/hwtracing/coresight/coresight-etm-perf.c:61:25: warning:
 symbol 'format_attr_contextid' was not declared. Should it be static?

This symbol is not used outside of coresight-etm-perf.c, so this
commit marks it static.

Link: https://lore.kernel.org/r/20210308123250.2417947-1-weiyongjun1@huawei.comReported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-3-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Add ETM PID for Cortex-A78 to the list of supported ETMs.

Link: https://lore.kernel.org/r/20210213112829.26834-1-saiprakash.ranjan@codeaurora.orgReviewed-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20210407160007.418053-2-mathieu.poirier@linaro.orgSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>