Now that all the .map_sg operations have been converted to returning
proper error codes, drop the code to handle a zero return value,
add a warning if a zero is returned.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

The only errno to return is -EINVAL in the case when DMA is not
supported.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Setting the ->dma_address to DMA_MAPPING_ERROR is not part of
the ->map_sg calling convention, so remove it.

Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

So make __dma_map_cont() return a valid errno (which is then propagated
to gart_map_sg() via dma_map_cont()) and return it in case of failure.

Also, return -EINVAL in case of invalid nents.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

xen_swiotlb_map_sg() may only fail if xen_swiotlb_map_page() fails, but
xen_swiotlb_map_page() only supports returning errors as
DMA_MAPPING_ERROR. So coalesce all errors into EIO per the documentation
for dma_map_sgtable().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.
Return -EINVAL if the ioc cannot be obtained.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Setting the ->dma_address to DMA_MAPPING_ERROR is not part of
the ->map_sg calling convention, so remove it.

Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

Returning an errno from __sbus_iommu_map_sg() results in
sbus_iommu_map_sg_gflush() and sbus_iommu_map_sg_pflush() returning an
errno, as those functions are wrappers around __sbus_iommu_map_sg().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Setting the ->dma_address to DMA_MAPPING_ERROR is not part of
the ->map_sg calling convention, so remove it.

Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

So propagate the error from __s390_dma_map_sg() up. __s390_dma_map_sg()
returns either -ENOMEM on allocation failure or -EINVAL which is
the same as what's expected by dma_map_sgtable().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Acked-by: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Setting the ->dma_address to DMA_MAPPING_ERROR is not part of
the ->map_sg calling convention, so remove it.

Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoff@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

Propagate the error up if vio_dma_iommu_map_sg() fails.

ppc_iommu_map_sg() may fail either because of iommu_range_alloc() or
because of tbl->it_ops->set(). The former only supports returning an
error with DMA_MAPPING_ERROR and an examination of the latter indicates
that it may return arch-specific errors (for example,
tce_buildmulti_pSeriesLP()). Hence, coalesce all of those errors into
-EIO, per the documentation on dma_map_sgtable().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Geoff Levand <geoff@infradead.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

vdma_alloc() may fail for different reasons, but since it only supports
indicating an error via a return of DMA_MAPPING_ERROR, we coalesce the
different reasons into -EIO as is documented on dma_map_sgtable().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

In the case of a dma_mapping_error() return -EIO as the actual cause
is opaque here.

sba_coalesce_chunks() may only presently fail if sba_alloc_range()
fails, which in turn only fails if the iommu is out of mapping
resources, hence a -ENOMEM is used in that case.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Niklas Schnelle <schnelle@linux.ibm.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Setting the ->dma_address to DMA_MAPPING_ERROR is not part of the
->map_sg calling convention, so remove it.

Link: https://lore.kernel.org/linux-mips/20210716063241.GC13345@lst.de/Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.
In the case of a DMA_MAPPING_ERROR, -EIO is returned. Otherwise,
-ENOMEM or -EINVAL is returned depending on the error from
__map_sg_chunk().
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>

The .map_sg() op now expects an error code instead of zero on failure.

pci_map_single_1() can fail for different reasons, but since the only
supported type of error return is DMA_MAPPING_ERROR, we coalesce those
errors into EIO.

ENOMEM is returned when no page tables can be allocated.
Signed-off-by: Martin Oliveira <martin.oliveira@eideticom.com>
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Return appropriate error codes EINVAL or ENOMEM from
iommup_dma_map_sg(). If lower level code returns ENOMEM, then we
return it, other errors are coalesced into EINVAL.

iommu_dma_map_sg_swiotlb() returns -EIO as its an unknown error
from a call that returns DMA_MAPPING_ERROR.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Convert to ssize_t return code so the return code from __iommu_map()
can be returned all the way down through dma_iommu_map_sg().
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Now that the map_sg() op expects error codes instead of return zero on
error, convert dma_direct_map_sg() to return an error code. Per the
documentation for dma_map_sgtable(), -EIO is returned due to an
DMA_MAPPING_ERROR with unknown cause.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Allow dma_map_sgtable() to pass errors from the map_sg() ops. This
will be required for returning appropriate error codes when mapping
P2PDMA memory.

Introduce __dma_map_sg_attrs() which will return the raw error code
from the map_sg operation (whether it be negative or zero). Then add a
dma_map_sg_attrs() wrapper to convert any negative errors to zero to
satisfy the existing calling convention.

dma_map_sgtable() defines three error codes that .map_sg implementations
are allowed to return: -EINVAL, -ENOMEM and -EIO. The latter of which
is a generic return for cases that are passing DMA_MAPPING_ERROR
through.

dma_map_sgtable() will convert a zero error return for old map_sg() ops
into a -EIO return and return any negative errors as reported.

This allows map_sg implementations to start returning multiple
negative error codes. Legacy map_sg implementations can continue
to return zero until they are all converted.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Due to link order, dma_debug_init is called before debugfs has a chance
to initialize (via debugfs_init which also happens in the core initcall
stage), so the directories for dma-debug are never created.

Decouple dma_debug_fs_init from dma_debug_init and defer its init until
core_initcall_sync (after debugfs has been initialized) while letting
dma-debug initialization occur as soon as possible to catch any early
mappings, as suggested in [1].

[1] https://lore.kernel.org/linux-iommu/YIgGa6yF%2Fadg8OSN@kroah.com/

Fixes: 15b28bbc ("dma-debug: move initialization to common code")
Signed-off-by: Anthony Iliopoulos <ailiop@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

There is already a memory_intersects() helper in sections.h,
use memory_intersects() directly instead of private overlap().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Pull timer fix from Thomas Gleixner:
 "A single timer fix:

   - Prevent a memory ordering issue in the timer expiry code which
     makes it possible to observe falsely that the callback has been
     executed already while that's not the case, which violates the
     guarantee of del_timer_sync()"

* tag 'timers-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers: Move clearing of base::timer_running under base:: Lock

Pull scheduler fix from Thomas Gleixner:
 "A single scheduler fix:

   - Prevent a double enqueue caused by rt_effective_prio() being
     invoked twice in __sched_setscheduler()"

* tag 'sched-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/rt: Fix double enqueue caused by rt_effective_prio

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

   - Correct the permission checks for perf event which send SIGTRAP to
     a different process and clean up that code to be more readable.

   - Prevent an out of bound MSR access in the x86 perf code which
     happened due to an incomplete limiting to the actually available
     hardware counters.

   - Prevent access to the AMD64_EVENTSEL_HOSTONLY bit when running
     inside a guest.

   - Handle small core counter re-enabling correctly by issuing an ACK
     right before reenabling it to prevent a stale PEBS record being
     kept around"

* tag 'perf-urgent-2021-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Apply mid ACK for small core
  perf/x86/amd: Don't touch the AMD64_EVENTSEL_HOSTONLY bit inside the guest
  perf/x86: Fix out of bound MSR access
  perf: Refactor permissions check into perf_check_permission()
  perf: Fix required permissions if sigtrap is requested

Pull char/misc driver fixes from Greg KH:
 "Here are some small char/misc driver fixes for 5.14-rc5.

  They resolve a few regressions that people reported:

   - acrn driver fix

   - fpga driver fix

   - interconnect tiny driver fixes

  All have been in linux-next for a while with no reported issues"

* tag 'char-misc-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  interconnect: Fix undersized devress_alloc allocation
  interconnect: qcom: icc-rpmh: Add BCMs to commit list in pre_aggregate
  interconnect: qcom: icc-rpmh: Ensure floor BW is enforced for all nodes
  fpga: dfl: fme: Fix cpu hotplug issue in performance reporting
  virt: acrn: Do hcall_destroy_vm() before resource release
  interconnect: Always call pre_aggregate before aggregate
  interconnect: Zero initial BW after sync-state

Merge tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core fixes from Greg KH:
 "Here are three tiny driver core and firmware loader fixes for
  5.14-rc5. They are:

   - driver core fix for when probing fails

   - firmware loader fixes for reported problems.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  firmware_loader: fix use-after-free in firmware_fallback_sysfs
  firmware_loader: use -ETIMEDOUT instead of -EAGAIN in fw_load_sysfs_fallback
  drivers core: Fix oops when driver probe fails

Pull staging driver fixes from Greg KH:
 "Here are a few small staging driver fixes for 5.14-rc5 to resolve some
  reported problems. They include:

   - mt7621 driver fix

   - rtl8723bs driver fixes

   - rtl8712 driver fixes.

  Nothing major, just small problems resolved.

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: mt7621-pci: avoid to re-disable clock for those pcies not in use
  staging: rtl8712: error handling refactoring
  staging: rtl8712: get rid of flush_scheduled_work
  staging: rtl8723bs: select CONFIG_CRYPTO_LIB_ARC4
  staging: rtl8723bs: Fix a resource leak in sd_int_dpc

Pull tty/serial fixes from Greg KH:
 "Here are some small tty/serial driver fixes for 5.14-rc5 to resolve a
  number of reported problems.

  They include:

   - mips serial driver fixes

   - 8250 driver fixes for reported problems

   - fsl_lpuart driver fixes

   - other tiny driver fixes

  All have been in linux-next for a while with no reported problems"

* tag 'tty-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: 8250_pci: Avoid irq sharing for MSI(-X) interrupts.
  serial: 8250_mtk: fix uart corruption issue when rx power off
  tty: serial: fsl_lpuart: fix the wrong return value in lpuart32_get_mctrl
  serial: 8250_pci: Enumerate Elkhart Lake UARTs via dedicated driver
  serial: 8250: fix handle_irq locking
  serial: tegra: Only print FIFO error message when an error occurs
  MIPS: Malta: Do not byte-swap accesses to the CBUS UART
  serial: 8250: Mask out floating 16/32-bit bus bits
  serial: max310x: Unprepare and disable clock in error path

Pull USB driver fixes from Greg KH:
 "Here are some small USB driver fixes for 5.14-rc5. They resolve a
  number of small reported issues, including:

   - cdnsp driver fixes

   - usb serial driver fixes and device id updates

   - usb gadget hid fixes

   - usb host driver fixes

   - usb dwc3 driver fixes

   - other usb gadget driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
  usb: typec: tcpm: Keep other events when receiving FRS and Sourcing_vbus events
  usb: dwc3: gadget: Avoid runtime resume if disabling pullup
  usb: dwc3: gadget: Use list_replace_init() before traversing lists
  USB: serial: ftdi_sio: add device ID for Auto-M3 OP-COM v2
  USB: serial: pl2303: fix GT type detection
  USB: serial: option: add Telit FD980 composition 0x1056
  USB: serial: pl2303: fix HX type detection
  USB: serial: ch341: fix character loss at high transfer rates
  usb: cdnsp: Fix the IMAN_IE_SET and IMAN_IE_CLEAR macro
  usb: cdnsp: Fixed issue with ZLP
  usb: cdnsp: Fix incorrect supported maximum speed
  usb: cdns3: Fixed incorrect gadget state
  usb: gadget: f_hid: idle uses the highest byte for duration
  Revert "thunderbolt: Hide authorized attribute if router does not support PCIe tunnels"
  usb: otg-fsm: Fix hrtimer list corruption
  usb: host: ohci-at91: suspend/resume ports after/before OHCI accesses
  usb: musb: Fix suspend and resume issues for PHYs on I2C and SPI
  usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers
  usb: gadget: f_hid: fixed NULL pointer dereference
  usb: gadget: remove leaked entry from udc driver list
  ...

Pull io_uring from Jens Axboe:
 "A few io-wq related fixes:

   - Fix potential nr_worker race and missing max_workers check from one
     path (Hao)

   - Fix race between worker exiting and new work queue (me)"

* tag 'io_uring-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
  io-wq: fix lack of acct->nr_workers < acct->max_workers judgement
  io-wq: fix no lock protection of acct->nr_worker
  io-wq: fix race between worker exiting and activating free worker

Pull block fixes from Jens Axboe:
 "A few minor fixes:

   - Fix ldm kernel-doc warning (Bart)

   - Fix adding offset twice for DMA address in n64cart (Christoph)

   - Fix use-after-free in dasd path handling (Stefan)

   - Order kyber insert trace correctly (Vincent)

   - raid1 errored write handling fix (Wei)

   - Fix blk-iolatency queue get failure handling (Yu)"

* tag 'block-5.14-2021-08-07' of git://git.kernel.dk/linux-block:
  kyber: make trace_block_rq call consistent with documentation
  block/partitions/ldm.c: Fix a kernel-doc warning
  blk-iolatency: error out if blk_get_queue() failed in iolatency_set_limit()
  n64cart: fix the dma address in n64cart_do_bvec
  s390/dasd: fix use after free in dasd path handling
  md/raid10: properly indicate failure when ending a failed write request

Pull RISC-V fixes from Palmer Dabbelt:

 - avoid dereferencing a null task pointer while walking the stack

 - fix the memory size in the HiFive Unleashed device tree

 - disable stack protectors when randstruct is enabled, which results in
   non-deterministic offsets during module builds

 - a pair of fixes to avoid relying on a constant physical memory base
   for the non-XIP builds

* tag 'riscv-for-linus-5.14-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: Remove CONFIG_PHYS_RAM_BASE_FIXED"
  riscv: Get rid of CONFIG_PHYS_RAM_BASE in kernel physical address conversion
  riscv: Disable STACKPROTECTOR_PER_TASK if GCC_PLUGIN_RANDSTRUCT is enabled
  riscv: dts: fix memory size for the SiFive HiFive Unmatched
  riscv: stacktrace: Fix NULL pointer dereference

Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Correct the Extended Regular Expressions in tools

 - Adjust scripts/checkversion.pl for the current Kbuild

 - Unset sub_make_done for 'make install' to make DKMS work again

* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: cancel sub_make_done for the install target to fix DKMS
  scripts: checkversion: modernize linux/version.h search strings
  mips: Fix non-POSIX regexp
  x86/tools/relocs: Fix non-POSIX regexp

This reverts commit 9b79878c.

The removal of this config exposes CONFIG_PHYS_RAM_BASE for all kernel
types: this value being implementation-specific, this breaks the
genericity of the RISC-V kernel so revert it.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The usage of CONFIG_PHYS_RAM_BASE for all kernel types was a mistake:
this value is implementation-specific and this breaks the genericity of
the RISC-V kernel.

Fix this by introducing a new variable phys_ram_base that holds this
value at runtime and use it in the kernel physical address conversion
macro. Since this value is used only for XIP kernels, evaluate it only if
CONFIG_XIP_KERNEL is set which in addition optimizes this macro for
standard kernels at compile-time.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Tested-by: Emil Renner Berthing <kernel@esmil.dk>
Reviewed-by: Jisheng Zhang <jszhang@kernel.org>
Fixes: 44c92257 ("RISC-V: enable XIP")
Cc: stable@vger.kernel.org
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The kyber ioscheduler calls trace_block_rq_insert() *after* the request
is added to the queue but the documentation for trace_block_rq_insert()
says that the call should be made *before* the request is added to the
queue.  Move the tracepoint for the kyber ioscheduler so that it is
consistent with the documentation.
Signed-off-by: Vincent Fu <vincent.fu@samsung.com>
Link: https://lore.kernel.org/r/20210804194913.10497-1-vincent.fu@samsung.com
Reviewed by: Adam Manzanares <a.manzanares@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull ext4 fixes from Ted Ts'o:
 "A regression fix, bug fix, and a comment cleanup for ext4"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix potential htree corruption when growing large_dir directories
  ext4: remove conflicting comment from __ext4_forget
  ext4: fix potential uninitialized access to retval in kmmpd