- 01 May, 2013 27 commits
-
-
Dmitry Popov authored
[ Upstream commit d66954a0 ] There is a bug in cookie_v4_check (net/ipv4/syncookies.c): flowi4_init_output(&fl4, 0, sk->sk_mark, RT_CONN_FLAGS(sk), RT_SCOPE_UNIVERSE, IPPROTO_TCP, inet_sk_flowi_flags(sk), (opt && opt->srr) ? opt->faddr : ireq->rmt_addr, ireq->loc_addr, th->source, th->dest); Here we do not respect sk->sk_bound_dev_if, therefore wrong dst_entry may be taken. This dst_entry is used by new socket (get_cookie_sock -> tcp_v4_syn_recv_sock), so its packets may take the wrong path. Signed-off-by:
Dmitry Popov <dp@highloadlab.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Riesch authored
[ Upstream commit 88c5b5ce ] Signed-off-by:
Michael Riesch <michael.riesch@omicron.at> Cc: Jiri Benc <jbenc@redhat.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Acked-by:
Mark Rustad <mark.d.rustad@intel.com> Signed-off-by:
-
Patrick McHardy authored
[ Upstream commit 124dff01 ] Commit 130549fe ("netfilter: reset nf_trace in nf_reset") added code to reset nf_trace in nf_reset(). This is wrong and unnecessary. nf_reset() is used in the following cases: - when passing packets up the the socket layer, at which point we want to release all netfilter references that might keep modules pinned while the packet is queued. nf_trace doesn't matter anymore at this point. - when encapsulating or decapsulating IPsec packets. We want to continue tracing these packets after IPsec processing. - when passing packets through virtual network devices. Only devices on that encapsulate in IPv4/v6 matter since otherwise nf_trace is not used anymore. Its not entirely clear whether those packets should be traced after that, however we've always done that. - when passing packets through virtual network devices that make the packet cross network namespace boundaries. This is the only cases where we clearly want to reset nf_trace and is also what the original patch intended to fix. Add a new function nf_reset_trace() and use it in dev_forward_skb() to fix this properly. Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Eric W. Biederman authored
[ Upstream commit 0e82e7f6 ] It was reported that the following LSB test case failed https://lsbbugs.linuxfoundation.org/attachment.cgi?id=2144 because we were not coallescing unix stream messages when the application was expecting us to. The problem was that the first send was before the socket was accepted and thus sock->sk_socket was NULL in maybe_add_creds, and the second send after the socket was accepted had a non-NULL value for sk->socket and thus we could tell the credentials were not needed so we did not bother. The unnecessary credentials on the first message cause unix_stream_recvmsg to start verifying that all messages had the same credentials before coallescing and then the coallescing failed because the second message had no credentials. Ignoring credentials when we don't care in unix_stream_recvmsg fixes a long standing pessimization which would fail to coallesce messages when reading from a unix stream socket if the senders were different even if we did not care about their credentials. I have tested this and verified that the in the LSB test case mentioned above that the messages do coallesce now, while the were failing to coallesce without this change. Reported-by:
Karel Srot <ksrot@redhat.com> Reported-by:
Ding Tianhong <dingtianhong@huawei.com> Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
nikolay@redhat.com authored
[ Upstream commit b6a5a7b9 ] While enslaving a new device and after IFF_BONDING flag is set, in case of failure it is not stripped from the device's priv_flags while cleaning up, which could lead to other problems. Cleaning at err_close because the flag is set after dev_open(). v2: no change Signed-off-by:
Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by:
-
nikolay@redhat.com authored
[ Upstream commit 69b0216a ] While the bonding module is unloading, it is considered that after rtnl_link_unregister all bond devices are destroyed but since no synchronization mechanism exists, a new bond device can be created via bonding_masters before unregister_pernet_subsys which would lead to multiple problems (e.g. NULL pointer dereference, wrong RIP, list corruption). This patch fixes the issue by removing any bond devices left in the netns after bonding_masters is removed from sysfs. Signed-off-by:
Veaceslav Falico <vfalico@redhat.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 31d1670e ] The limit of 0x3c00 is taken from the windows driver. Suggested-by:
Huang, Xiong <xiong@qca.qualcomm.com> Cc: Huang, Xiong <xiong@qca.qualcomm.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 4543fbef ] A few drivers use dev_uc_sync/unsync to synchronize the address lists from master down to slave/lower devices. In some cases (bond/team) a single address list is synched down to multiple devices. At the time of unsync, we have a leak in these lower devices, because "synced" is treated as a boolean and the address will not be unsynced for anything after the first device/call. Treat "synced" as a count (same as refcount) and allow all unsync calls to work. Signed-off-by:
Vlad Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Balakumaran Kannan authored
[ Upstream commit 25fb6ca4 ] IPv6 Routing table becomes broken once we do ifdown, ifup of the loopback(lo) interface. After down-up, routes of other interface's IPv6 addresses through 'lo' are lost. IPv6 addresses assigned to all interfaces are routed through 'lo' for internal communication. Once 'lo' is down, those routing entries are removed from routing table. But those removed entries are not being re-created properly when 'lo' is brought up. So IPv6 addresses of other interfaces becomes unreachable from the same machine. Also this breaks communication with other machines because of NDISC packet processing failure. This patch fixes this issue by reading all interface's IPv6 addresses and adding them to IPv6 routing table while bringing up 'lo'. ==Testing== Before applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ After applying the patch: $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ sudo ifdown lo $ sudo ifup lo $ route -A inet6 Kernel IPv6 routing table Destination Next Hop Flag Met Ref Use If 2000::20/128 :: U 256 0 0 eth0 fe80::/64 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo ::1/128 :: Un 0 1 0 lo 2000::20/128 :: Un 0 1 0 lo fe80::xxxx:xxxx:xxxx:xxxx/128 :: Un 0 1 0 lo ff00::/8 :: U 256 0 0 eth0 ::/0 :: !n -1 1 1 lo $ Signed-off-by:
Balakumaran Kannan <Balakumaran.Kannan@ap.sony.com> Signed-off-by:
Maruthi Thotad <Maruthi.Thotad@ap.sony.com> Signed-off-by:
-
Vasily Averin authored
[ Upstream commit f0f6ee1f ] currently cbq works incorrectly for limits > 10% real link bandwidth, and practically does not work for limits > 50% real link bandwidth. Below are results of experiments taken on 1 Gbit link In shaper | Actual Result -----------+--------------- 100M | 108 Mbps 200M | 244 Mbps 300M | 412 Mbps 500M | 893 Mbps This happen because of q->now changes incorrectly in cbq_dequeue(): when it is called before real end of packet transmitting, L2T is greater than real time delay, q_now gets an extra boost but never compensate it. To fix this problem we prevent change of q->now until its synchronization with real time. Signed-off-by:
Vasily Averin <vvs@openvz.org> Reviewed-by:
Alexey Kuznetsov <kuznet@ms2.inr.ac.ru> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit c802d759 ] sizeof() when applied to a pointer typed expression gives the size of the pointer, not that of the pointed data. Introduced by commit 3ce5ef(netrom: fix info leak via msg_name in nr_recvmsg) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 60085c3d ] The code in set_orig_addr() does not initialize all of the members of struct sockaddr_tipc when filling the sockaddr info -- namely the union is only partly filled. This will make recv_msg() and recv_stream() -- the only users of this function -- leak kernel stack memory as the msg_name member is a local variable in net/socket.c. Additionally to that both recv_msg() and recv_stream() fail to update the msg_namelen member to 0 while otherwise returning with 0, i.e. "success". This is the case for, e.g., non-blocking sockets. This will lead to a 128 byte kernel stack leak in net/socket.c. Fix the first issue by initializing the memory of the union with memset(0). Fix the second one by setting msg_namelen to 0 early as it will be updated later if we're going to fill the msg_name member. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Allan Stephens <allan.stephens@windriver.com> Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 4a184233 ] The code in rose_recvmsg() does not initialize all of the members of struct sockaddr_rose/full_sockaddr_rose when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. This will lead to leaking uninitialized kernel stack bytes in net/socket.c. Fix the issue by initializing the memory used for sockaddr info with memset(0). Signed-off-by:
-
Mathias Krause authored
[ Upstream commit d26d6504 ] The code in llcp_sock_recvmsg() does not initialize all the members of struct sockaddr_nfc_llcp when filling the sockaddr info. Nor does it initialize the padding bytes of the structure inserted by the compiler for alignment. Also, if the socket is in state LLCP_CLOSED or is shutting down during receive the msg_namelen member is not updated to 0 while otherwise returning with 0, i.e. "success". The msg_namelen update is also missing for stream and seqpacket sockets which don't fill the sockaddr info. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix the first issue by initializing the memory used for sockaddr info with memset(0). Fix the second one by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Signed-off-by:
-
Mathias Krause authored
[ Upstream commits 3ce5efad and c802d759 ] In case msg_name is set the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Also the sax25_ndigis member does not get assigned, leaking four more bytes. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Signed-off-by:
-
Mathias Krause authored
[ Upstream commit c77a4b9c ] For stream sockets the code misses to update the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. The msg_namelen update is also missing for datagram sockets in case the socket is shutting down during receive. Fix both issues by setting msg_namelen to 0 early. It will be updated later if we're going to fill the msg_name member. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit a5598bd9 ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about iucv_sock_recvmsg() not filling the msg_name in case it was set. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 5ae94c0d ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about irda_recvmsg_dgram() not filling the msg_name in case it was set. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 2d6fbfe7 ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about caif_seqpkt_recvmsg() not filling the msg_name in case it was set. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit e11e0455 ] If RFCOMM_DEFER_SETUP is set in the flags, rfcomm_sock_recvmsg() returns early with 0 without updating the possibly set msg_namelen member. This, in turn, leads to a 128 byte kernel stack leak in net/socket.c. Fix this by updating msg_namelen in this case. For all other cases it will be handled in bt_sock_stream_recvmsg(). Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 4683f42f ] In case the socket is already shutting down, bt_sock_recvmsg() returns with 0 without updating msg_namelen leading to net/socket.c leaking the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix this by moving the msg_namelen assignment in front of the shutdown test. Signed-off-by:
-
Mathias Krause authored
[ Upstream commit ef3313e8 ] When msg_namelen is non-zero the sockaddr info gets filled out, as requested, but the code fails to initialize the padding bytes of struct sockaddr_ax25 inserted by the compiler for alignment. Additionally the msg_namelen value is updated to sizeof(struct full_sockaddr_ax25) but is not always filled up to this size. Both issues lead to the fact that the code will leak uninitialized kernel stack bytes in net/socket.c. Fix both issues by initializing the memory with memset(0). Signed-off-by:
-
Mathias Krause authored
[ Upstream commit 9b3e617f ] The current code does not fill the msg_name member in case it is set. It also does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local, uninitialized sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that by simply setting msg_namelen to 0 as obviously nobody cared about vcc_recvmsg() not filling the msg_name in case it was set. Signed-off-by:
-
David S. Miller authored
[ Commits f36391d2 and f0af9707 upstream. ] As reported by Dave Kleikamp, when we emit cross calls to do batched TLB flush processing we have a race because we do not synchronize on the sibling cpus completing the cross call. So meanwhile the TLB batch can be reset (tb->tlb_nr set to zero, etc.) and either flushes are missed or flushes will flush the wrong addresses. Fix this by using generic infrastructure to synchonize on the completion of the cross call. This first required getting the flush_tlb_pending() call out from switch_to() which operates with locks held and interrupts disabled. The problem is that smp_call_function_many() cannot be invoked with IRQs disabled and this is explicitly checked for with WARN_ON_ONCE(). We get the batch processing outside of locked IRQ disabled sections by using some ideas from the powerpc port. Namely, we only batch inside of arch_{enter,leave}_lazy_mmu_mode() calls. If we're not in such a region, we flush TLBs synchronously. 1) Get rid of xcall_flush_tlb_pending and per-cpu type implementations. 2) Do TLB batch cross calls instead via: smp_call_function_many() tlb_pending_func() __flush_tlb_pending() 3) Batch only in lazy mmu sequences: a) Add 'active' member to struct tlb_batch b) Define __HAVE_ARCH_ENTER_LAZY_MMU_MODE c) Set 'active' in arch_enter_lazy_mmu_mode() d) Run batch and clear 'active' in arch_leave_lazy_mmu_mode() e) Check 'active' in tlb_batch_add_one() and do a synchronous flush if it's clear. 4) Add infrastructure for synchronous TLB page flushes. a) Implement __flush_tlb_page and per-cpu variants, patch as needed. b) Likewise for xcall_flush_tlb_page. c) Implement smp_flush_tlb_page() to invoke the cross-call. d) Wire up global_flush_tlb_page() to the right routine based upon CONFIG_SMP 5) It turns out that singleton batches are very common, 2 out of every 3 batch flushes have only a single entry in them. The batch flush waiting is very expensive, both because of the poll on sibling cpu completeion, as well as because passing the tlb batch pointer to the sibling cpus invokes a shared memory dereference. Therefore, in flush_tlb_pending(), if there is only one entry in the batch perform a completely asynchronous global_flush_tlb_page() instead. Reported-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Signed-off-by:
-
Jiri Slaby authored
commit 37b7f3c7 upstream. In commit b0de59b5 ("TTY: do not update atime/mtime on read/write") we removed timestamps from tty inodes to fix a security issue and waited if something breaks. Well, 'w', the utility to find out logged users and their inactivity time broke. It shows that users are inactive since the time they logged in. To revert to the old behaviour while still preventing attackers to guess the password length, we update the timestamps in one-minute intervals by this patch. Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jiri Slaby authored
commit b0de59b5 upstream. On http://vladz.devzero.fr/013_ptmx-timing.php, we can see how to find out length of a password using timestamps of /dev/ptmx. It is documented in "Timing Analysis of Keystrokes and Timing Attacks on SSH". To avoid that problem, do not update time when reading from/writing to a TTY. I am afraid of regressions as this is a behavior we have since 0.97 and apps may expect the time to be current, e.g. for monitoring whether there was a change on the TTY. Now, there is no change. So this would better have a lot of testing before it goes upstream. References: CVE-2013-0160 Signed-off-by:
-
Zhao Hongjiang authored
commit 91d80a84 upstream. dprintk() shouldn't access @ring after it's unmapped. Signed-off-by:
Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by:
-
- 26 Apr, 2013 13 commits
-
-
Greg Kroah-Hartman authored
-
Josef Bacik authored
commit 4bc4bee4 upstream. While trying to track down a tree log replay bug I noticed that fsck was always complaining about nbytes not being right for our fsynced file. That is because the new fsync stuff doesn't wait for ordered extents to complete, so the inodes nbytes are not necessarily updated properly when we log it. So to fix this we need to set nbytes to whatever it is on the inode that is on disk, so when we replay the extents we can just add the bytes that are being added as we replay the extent. This makes it work for the case that we have the wrong nbytes or the case that we logged everything and nbytes is actually correct. With this I'm no longer getting nbytes errors out of btrfsck. Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com> Signed-off-by:
Lingzhu Xiang <lxiang@redhat.com> Reviewed-by:
CAI Qian <caiqian@redhat.com> Signed-off-by:
-
Linus Torvalds authored
commit 8558e4a2 upstream. This is my example conversion of a few existing mmap users. The mtdchar case is actually disabled right now (and stays disabled), but I did it because it showed up on my "git grep", and I was familiar with the code due to fixing an overflow problem in the code in commit 9c603e53 ("mtdchar: fix offset overflow detection"). Signed-off-by:
-
Linus Torvalds authored
commit 2323036d upstream. This is my example conversion of a few existing mmap users. The HPET case is simple, widely available, and easy to test (Clemens Ladisch sent a trivial test-program for it). Test-program-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
Linus Torvalds authored
commit fc9bbca8 upstream. This is my example conversion of a few existing mmap users. The fb_mmap() case is a good example because it is a bit more complicated than some: fb_mmap() mmaps one of two different memory areas depending on the page offset of the mmap (but happily there is never any mixing of the two, so the helper function still works). Signed-off-by:
-
Linus Torvalds authored
commit 0fe09a45 upstream. This is my example conversion of a few existing mmap users. The pcm mmap case is one of the more straightforward ones. Acked-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Linus Torvalds authored
commit b4cbb197 upstream. Various drivers end up replicating the code to mmap() their memory buffers into user space, and our core memory remapping function may be very flexible but it is unnecessarily complicated for the common cases to use. Our internal VM uses pfn's ("page frame numbers") which simplifies things for the VM, and allows us to pass physical addresses around in a denser and more efficient format than passing a "phys_addr_t" around, and having to shift it up and down by the page size. But it just means that drivers end up doing that shifting instead at the interface level. It also means that drivers end up mucking around with internal VM things like the vma details (vm_pgoff, vm_start/end) way more than they really need to. So this just exports a function to map a certain physical memory range into user space (using a phys_addr_t based interface that is much more natural for a driver) and hides all the complexity from the driver. Some drivers will still end up tweaking the vm_page_prot details for things like prefetching or cacheability etc, but that's actually relevant to the driver, rather than caring about what the page offset of the mapping is into the particular IO memory region. Acked-by:
-
Dave Airlie authored
commit 054430e7 upstream. Okay so Alan's patch handled the case where there was no registered fbcon, however the other path entered in set_con2fb_map pit. In there we called fbcon_takeover, but we also took the console lock in a couple of places. So push the console lock out to the callers of set_con2fb_map, this means fbmem and switcheroo needed to take the lock around the fb notifier entry points that lead to this. This should fix the efifb regression seen by Maarten. Tested-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Tested-by:
Lu Hua <huax.lu@intel.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Stephane Eranian authored
commit f1923820 upstream. The valid mask for both offcore_response_0 and offcore_response_1 was wrong for SNB/SNB-EP, IVB/IVB-EP. It was possible to write to reserved bit and cause a GP fault crashing the kernel. This patch fixes the problem by correctly marking the reserved bits in the valid mask for all the processors mentioned above. A distinction between desktop and server parts is introduced because bits 24-30 are only available on the server parts. This version of the patch is just a rebase to perf/urgent tree and should apply to older kernels as well. Signed-off-by:
Stephane Eranian <eranian@google.com> Cc: peterz@infradead.org Cc: jolsa@redhat.com Cc: ak@linux.intel.com Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Tommi Rantala authored
commit 8176cced upstream. Trinity discovered that we fail to check all 64 bits of attr.config passed by user space, resulting to out-of-bounds access of the perf_swevent_enabled array in sw_perf_event_destroy(). Introduced in commit b0a873eb ("perf: Register PMU implementations"). Signed-off-by:
Tommi Rantala <tt.rantala@gmail.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: davej@redhat.com Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net> Link: http://lkml.kernel.org/r/1365882554-30259-1-git-send-email-tt.rantala@gmail.comSigned-off-by:
-
Mathias Krause authored
commit 72a763d8 upstream. The current code does not set the msg_namelen member to 0 and therefore makes net/socket.c leak the local sockaddr_storage variable to userland -- 128 bytes of kernel stack memory. Fix that. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Rafał Miłecki authored
commit 46fc4c90 upstream. And make use of it in b43. This fixes a regression introduced with 49d55cef b43: N-PHY: implement spurious tone avoidance This commit made BCM4322 use only MCS 0 on channel 13, which of course resulted in performance drop (down to 0.7Mb/s). Reported-by:
Stefan Brüns <stefan.bruens@rwth-aachen.de> Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Felix Fietkau authored
commit f09a8785 upstream. The hardware parsing of Control Wrapper Frames needs to be disabled, as it has been causing spurious decryption error reports. The initvals for other chips have been updated to disable it, but AR9580 was left out for some reason. Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
-
