- 06 Jul, 2012 9 commits
-
-
Devin Heitmueller authored
The analog support in the cx23885 driver was completely broken for the HVR-1250. Add the necessary code. Note that this only implements analog for the composite and s-video inputs. The tuner input continues to be non-functional due to a lack of analog support in the mt2131 driver. Validated with the following boards: HVR-1250 (0070:7911) Thanks to Steven Toth and Hauppauge for loaning me various boards to regression test with. Thanks-to: Steven Toth <stoth@kernellabs.com> Signed-off-by:
Devin Heitmueler <dheitmueller@kernellabs.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Devin Heitmueller authored
The location of the vsrc/hsrc registers moved in the cx23888, causing the s_mbus call to fail prematurely indicating that "720x480 is not a valid size". The function bailed out before many pertinent registers were set related to the scaler (causing unexpected results in video rendering when doing raw video capture). Use the correct registers for the cx23888. Validated with the following boards: HVR-1800 retail (0070:7801) HVR-1800 OEM (0070:7809) HVR-1850 retail (0070:8541) Thanks to Steven Toth and Hauppauge for loaning me various boards to regression test with. Reported-by:
Jonathan <sitten74490@mypacks.net> Thanks-to: Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Devin Heitmueller authored
The refactoring of the cx25840 driver to support the cx23888 caused breakage with the existing support for cx23885/cx23887 analog audio support. Tweak the code so that it only uses the code if it really is a cx23888 instead of applying it to all cx2388x based devices. Validated with the following boards: HVR-1800 retail (0070:7801) HVR-1800 OEM (0070:7809) HVR_1850 retail (0070:8541) Thanks to Steven Toth and Hauppauge for loaning me various boards to regression test with. Reported-by:
-
Devin Heitmueller authored
Fix regression in HVR-1800 analog support hue/saturation controls. The changes made for the cx23888 caused regressions in the analog support for cx23885/cx23887 based boards (partly due to changes in the locations of the hue/saturation controls). As a result the wrong registers were being overwritten. Add code to use the correct registers if it's a cx23888 Validated with the following boards: HVR-1800 retail (0070:7801) HVR-1800 OEM (0070:7809) HVR-1850 retail (0070:8541) Thanks to Steven Toth and Hauppauge for loaning me various boards to regression test with. Reported-by:
-
Devin Heitmueller authored
The refactoring of the cx25840 driver to support the cx23888 caused breakage with the existing support for cx23885/cx23887 analog support. Rework the routines such that the new code is only used for the 888. Validated with the following boards: HVR-1800 retail (0070:7801) HVR-1800 OEM (0070:7809) HVR_1850 retail (0070:8541) Thanks to Steven Toth and Hauppauge for loaning me various boards to regression test with. Reported-by:
-
Kamil Debski authored
Fixed bugs in functions that initialize custom controls. Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
David Dillow authored
Commit 7a6f6c29 (cx231xx: use URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer for URB twice. This works for the URBs allocated with usb_alloc_urb(), as those are allocated from cohernent DMA pools, but the flag was also added for the VBI and audio URBs, which have a manually allocated area. This leaves the random trash in the structure after allocation as the DMA address, corrupting memory and preventing VBI and audio from working. Letting the USB core map the buffers solves the problem. Cc: stable@kernel.org Signed-off-by:
David Dillow <dave@thedillows.org> Cc: Sri Deevi <srinivasa.deevi@conexant.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The logic that checks if a device has remote control is wrong. Due to that, the em28xx RC module is not loaded by default. Fix the logic, in order to make it work properly. Signed-off-by: -
Santosh Nayak authored
There is a missing "up_write()" here. Semaphore should be released before returning error value. Cc: stable@kernel.org Signed-off-by:
Santosh Nayak <santoshprasadnayak@gmail.com> Signed-off-by:
-
- 25 Jun, 2012 11 commits
-
-
Sachin Kamat authored
Stops the media entity pipeline which was started earlier if fimc_pipeline_validate fails. [s.nawrocki: reworked to not exceed 80 characters line length] Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
-
Sachin Kamat authored
This patch is an update to changed media_entity_pipeline_start() signature in commit af88be38, "media: Add link_validate() op to check links to the sink pad" It fixes the following warning: drivers/media/video/s5p-fimc/fimc-lite.c: In function ‘fimc_lite_streamon’: drivers/media/video/s5p-fimc/fimc-lite.c:765:29: warning: ignoring return value of ‘media_entity_pipeline_start’, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by:
-
Sakari Ailus authored
Take into account media_entity_pipeline_start() may fail. [s.nawrocki: rebased onto latest tree] Signed-off-by:
Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by:
-
Sylwester Nawrocki authored
Commit 77e7c4e6 "v4l: Allow changing control handler lock" changed the lock field of struct v4l2_ctrl_handler to a pointer and this driver wasn't updated properly. This patch fixes following warning: drivers/media/video/s5p-fimc/fimc-core.c: In function ‘fimc_ctrls_activate’: drivers/media/video/s5p-fimc/fimc-core.c:644: warning: passing argument 1 of ‘mutex_lock’ from incompatible pointer type include/linux/mutex.h:152: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’ drivers/media/video/s5p-fimc/fimc-core.c:663: warning: passing argument 1 of ‘mutex_unlock’ from incompatible pointer type include/linux/mutex.h:169: note: expected ‘struct mutex *’ but argument is of type ‘struct mutex **’ Signed-off-by:
-
Sylwester Nawrocki authored
Shorten pixel format descriptions that exceed 32 characters so they're not being truncated when queried from user space. Signed-off-by:
-
Sylwester Nawrocki authored
Only suspend the video pipeline devices if they were active before the pm.suspend() helper is called. This patch prevents following error: /# echo mem > /sys/power/state [ 34.965000] PM: Syncing filesystems ... done. [ 35.035000] Freezing user space processes ... (elapsed 0.01 seconds) done. ... [ 35.105000] dpm_run_callback(): platform_pm_suspend+0x0/0x5c returns -22 [ 35.105000] PM: Device exynos-fimc-lite.1 failed to suspend: error -22 [ 35.105000] PM: Some devices failed to suspend Signed-off-by:
-
Sylwester Nawrocki authored
The camera clocks managed by the driver were improperly reference counted and remained disabled when multiple video nodes were opened simultaneously. It manifested itself with following warning: [12.920000] WARNING: at drivers/media/video/s5p-fimc/fimc-mdevice.c:787 __fimc_md_set_camclk+0x1c0/0x1dc() [13.005000] Modules linked in: [13.005000] Backtrace: [13.040000] [<c0013084>] (dump_backtrace+0x0/0x10c) from [<c0454b70>] (dump_stack+0x18/0x1c) [13.070000] r7:00000009 r6:00000313 r5:c02d576c r4:00000000 [13.155000] [<c0454b58>] (dump_stack+0x0/0x1c) from [<c0022ec4>] (warn_slowpath_common+0x54/0x6c) [13.285000] [<c0022e70>] (warn_slowpath_common+0x0/0x6c) from [<c0022f00>] (warn_slowpath_null+0x24/0x2c) [13.360000] r9:e1981010 r8:00000000 r7:c061d3fc r6:e1981010 r5:e1981030 [13.430000] r4:00000000 [13.430000] [<c0022edc>] (warn_slowpath_null+0x0/0x2c) from [<c02d576c>] (__fimc_md_set_camclk+0x1c0/0x1dc) [13.550000] [<c02d55ac>] (__fimc_md_set_camclk+0x0/0x1dc) from [<c02d57b0>] (fimc_md_set_camclk+0x28/0x2c) [13.630000] [<c02d5788>] (fimc_md_set_camclk+0x0/0x2c) from [<c02d57e8>] (__fimc_pipeline_shutdown+0x34/0x50) [13.705000] [<c02d57b4>] (__fimc_pipeline_shutdown+0x0/0x50) from [<c02d5844>] (fimc_pipeline_shutdown+0x40/0x58) [13.765000] r5:e2391200 r4:e2357704 [13.805000] [<c02d5804>] (fimc_pipeline_shutdown+0x0/0x58) from [<c02d4754>] (fimc_capture_close+0xcc/0xe4) [13.915000] r5:e1b396c0 r4:e2357410 [13.915000] [<c02d4688>] (fimc_capture_close+0x0/0xe4) from [<c02b2d5c>] (v4l2_release+0x5c/0x80) [13.970000] r7:00000010 r6:e1d2d990 r5:e1b396c0 r4:e2394800 [14.000000] [<c02b2d00>] (v4l2_release+0x0/0x80) from [<c00b66cc>] (fput+0xc0/0x22c) [14.015000] r5:c157ef30 r4:e1b396c0 [14.015000] [<c00b660c>] (fput+0x0/0x22c) from [<c00b2ca0>] (filp_close+0x60/0x80) [14.080000] [<c00b2c40>] (filp_close+0x0/0x80) from [<c00b2d78>] (sys_close+0xb8/0xf4) [14.125000] r7:00000001 r6:e1b396c0 r5:c1400340 r4:c1400300 [14.125000] [<c00b2cc0>] (sys_close+0x0/0xf4) from [<c000f300>] (ret_fast_syscall+0x0/0x30) [14.205000] r7:00000006 r6:beee5b94 r5:00000003 r4:b6f64fac Fix this, as well as potential memory leaks due to not calling v4l2_fh_release() on some error paths. Also remove some error logs printed for events that aren't critical and are normal conditions for some system configurations. Also check if the device have been properly run-time enabled during video node open. Signed-off-by:
-
Sylwester Nawrocki authored
The checks are already done at the v4l2 framework. Signed-off-by:
-
Sylwester Nawrocki authored
Allow memory buffer size to be increased by means of struct v4l2_pix_plane_format::sizeimage at VIDIOC_S_FMT ioctl. Signed-off-by:
-
Sylwester Nawrocki authored
The driver is supposed to create active media link from sensor N (or its corresponding s5p-mipi-csis entity) to FIMC.N by default. Instead s5p-mipi-csis.N entity gets always connected by a default active link to FIMC.N, regardless of there are parallel bus sensor entities already connected to FIMC.N. Correct this. Signed-off-by:
-
Sylwester Nawrocki authored
When video pipeline initialization fails, the ST_CAPT_BUSY flag needs to be cleared before pm_runtime_put_sync is called. Otherwise the runtime suspend routine tries to suspend device, rather than just turning it off. Also fix potential null pointer dereference in fimc_pipeline_shutdown(). Signed-off-by:
-
- 21 Jun, 2012 2 commits
-
-
Randy Dunlap authored
drivers/media/video/pms.c uses kzalloc() and kfree() so it should include <linux/slab.h> to fix build errors and a warning. drivers/media/video/pms.c:1047:2: error: implicit declaration of function 'kzalloc' drivers/media/video/pms.c:1047:6: warning: assignment makes pointer from integer without a cast drivers/media/video/pms.c:1116:2: error: implicit declaration of function 'kfree' Found in mmotm but applies to mainline. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
smiapp-core.c:2472:3: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration] Signed-off-by:
-
- 18 Jun, 2012 15 commits
-
-
Fengguang Wu authored
Fix a compiler breakage introduced by commit 8173090a: drivers/media/video/pms.c: In function ‘pms_probe’: drivers/media/video/pms.c:1047:2: error: implicit declaration of function ‘kzalloc’ [-Werror=implicit-function-declaration] drivers/media/video/pms.c:1116:2: error: implicit declaration of function ‘kfree’ [-Werror=implicit-function-declaration] Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
Alan Cox authored
Fix compile of smia code. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=43337Signed-off-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@maxwell.research.nokia.com> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Kamil Debski authored
Fixed the size of the V4L2_CID_COLORFX control cluster. Prior to this fix V4L2_CID_ROTATE was also icluded in the cluster preventing application from enabling rotation. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Sachin Kamat authored
Fixes the following error: ERROR: open brace '{' following enum go on the same line +enum MFC_SHM_OFS +{ Signed-off-by: -
Kamil Debski authored
Fixed s_ctrl function when setting the following controls: - V4L2_CID_MPEG_VIDEO_DECODER_MPEG4_DEBLOCK_FILTER - V4L2_CID_MPEG_MFC51_VIDEO_DECODER_H264_DISPLAY_DELAY Signed-off-by:
-
Andrzej Hajda authored
Image size for MFC encoder should have size between 8x4 and 1920x1080 with even width and height. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Andrzej Hajda authored
Patch corrects definition of H264 level control and changes bare numbers to enums in two other cases. Signed-off-by:
-
Tomasz Moń authored
The mem2mem_testdev allows multiple instances to be opened in parallel. Source and destination queue data are being shared between all instances, which can lead to kernel oops due to race conditions (most likely to happen inside device_run()). Attached patch fixes mentioned problem by storing queue data per device context. Signed-off-by:
Tomasz Moń <desowin@gmail.com> Signed-off-by:
-
Kamil Debski authored
Fixed the code copying timecode/timestamp to corresponding frames between OUTPUT and CAPTURE. Signed-off-by:
-
Janne Huttunen authored
Fix an incorrect modulation type bitmask. This allows QAM256 also to be correctly reported. Signed-off-by:
Janne Huttunen <jahuttun@gmail.com> Acked-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Martin Blumenstingl authored
This simply shows a little warning if the board does not have remote control support. This should make it easier for users to see if they have misconfigured their system or if the driver simply does not have rc-support for their card (yet). Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by:
-
Martin Blumenstingl authored
The Cinergy HTC Stick HD uses the same remote control as the TerraTec Cinergy XS products. Thus the same keymap could be re-used. Signed-off-by:
-
Sasha Levin authored
Initialize the spinlock for each hardware time. Signed-off-by:
Sasha Levin <levinsasha928@gmail.com> Signed-off-by:
-
Guennadi Liakhovetski authored
This reverts commit d509835e. That commit breaks support for the generic pass-through mode in the driver for formats, not natively supported by it. Besides due to a merge conflict it also breaks driver compilation: drivers/media/video/mx2_camera.c: In function 'mx2_camera_set_bus_param': drivers/media/video/mx2_camera.c:937: error: 'pixfmt' undeclared (first use in this function) drivers/media/video/mx2_camera.c:937: error: (Each undeclared identifier is reported only once drivers/media/video/mx2_camera.c:937: error: for each function it appears in.) Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by:
-
- 11 Jun, 2012 3 commits
-
-
Hans Verkuil authored
Fix the documentation of the Y4 and Y6 formats. Fix a poll() issue, add support for enum_frmsizes, set the proper parent device and fix a few compliance issues. Tested with an actual Connectix B&W parallel port webcam, both on a little-endian and a big-endian platform. This driver has never been so good, doing 320x240 at 1 frame per second :-) I know, nobody cares, but still it is cool that linux can still support this old webcam. Signed-off-by:
-
Hans Verkuil authored
Tested with a HVR-1300. Signed-off-by:
-
Hans Verkuil authored
base_addr has type resource_size_t, which may be 64 bits. Also fix a few endian issues related to mailboxes and firmware loading. Signed-off-by:
-
