If a Sixaxis or Dualshock 4 controller is connected via USB while already
connected via Bluetooth it will cause duplicate devices to be added to the
input device list.

To prevent this a global list of controllers and their MAC addresses is
maintained and new controllers are checked against this list.  If a duplicate
is found, the probe function will exit with -EEXIST.

On USB the MAC is retrieved via a feature report.  On Bluetooth neither
controller reports the MAC address in a feature report so the MAC is parsed from
the uniq string.  As uniq cannot be guaranteed to be a MAC address in every case
(uHID or the behavior of HIDP changing) a parsing failure will not prevent the
connection.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Make sure that an out-of-bounds read doesn't occur in the Sixaxis battery level
lookup table in the event that the controller sends an invalid battery status
value in the report.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Only initialize force feedback for devices that actually support it (Sixaxis and
Dualshock 4) to prevent calls to schedule_work() with an uninitialized work
queue.

Move the cancel_work_sync() call out of sony_destroy_ff() since the state worker
is used for the LEDs even when force-feedback is disabled.

Remove the sony_destroy_ff() function since it is no longer used.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Convert multi-line comments to comply with the kernel coding style.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add a SIXAXIS_CONTROLLER macro to simplify conditionals where the
connection type is irrelevant.

Enable the LED and force feedback controls for Sixaxis controllers connected via
Bluetooth.

Send Sixaxis Bluetooth output reports on the control channel.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The battery_charging and cable_state flags were backwards on the Sixaxis.
The low bit of report byte 30 is 0 when charging and 1 when not.
Bit 5 of byte 31 is 0 when a USB cable is connected and 1 when not.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add the conditionals to enable rumble, battery reporting, LED and touchpad
support for the Dualshock 4 in Bluetooth mode.

Add dualshock4_set_operational_bt to initialize the controller to the proper
operational state.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Set the initial battery level to 100% to avoid false low battery warnings if
the battery state is polled before a report with the actual battery level is
received.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add Dualshock 4 battery and touchpad parsing for Bluetooth reports.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add formating for the Dualshock 4 output report data in Bluetooth mode.

In Bluetooth mode the Dualshock 4 wants output reports sent on the control
channel.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

By default, the Dualshock 4 sends controller data via report 1. Once a valid
output report 0x11 is received or a feature report of type 0x02 is requested the
controller changes from sending data in report 1 to sending data in report 17,
which is unmapped in the default descriptor. The mappings have to be moved to
report 17 to let the HID driver properly process the incoming reports.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Switch to the low-level transport driver functions.

sony_set_output_report is removed since it is no longer used.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add David Herrmann's documentation for the new low-level HID transport driver
functions.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add a helper to access hdev->hid_output_raw_report().

To convert the drivers, use the following snippets:

for i in drivers/hid/*.c
do
  sed -i.bak "s/[^ \t]*->hid_output_raw_report(/hid_output_raw_report(/g" $i
done

Then manually fix for checkpatch.pl
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT)
are strictly equivalent. Switch the hid subsystem to the hid_hw notation
and remove the field .hid_get_raw_report in struct hid_device.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Well, no use to keep twice the same code.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

- Move hidp_output_report() above
- Removed duplicated code in hidp_output_raw_report()
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

All the different transport drivers use now the generic event handling
in hid-input. We can remove the handler definitively now.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

hidp uses its own ->hidinput_input_event() instead of the generic binding
in hid-input.
Moving the handling of LEDs towards hidp_hidinput_event() allows two things:
- remove hidinput_input_event definitively from struct hid_device
- hidraw user space programs can also set the LEDs
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

hid-logitech-dj uses its own ->hidinput_input_event() instead of
the generic binding in hid-input.
Moving the handling of LEDs towards logi_dj_output_hidraw_report()
allows two things:
- remove hidinput_input_event in struct hid_device
- hidraw user space programs can also set the LEDs
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Those callbacks are not mandatory, so it's better to add inliners
to use them safely.
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Dualshock4 controller contains a RGB LED, which is enabled via
the '/sys/class/leds' interface. At present the driver only returns
whether each of the RGB LEDs is lit (ie not off), but no indication
of it's brightness.

This patch fixes the reading of the current brightnes so that it
returns the value (rather than just off=0, on=LED_FULL).

Tested on the DS4 and SixAxis (for compatibility).
Signed-off-by: Simon Wood <simon@mungewell.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Update the HID_SONY config with 'select POWER_SUPPLY' to fix build issues
relating to undefined references to the  power_supply_* functions in
certain build configurations.

Update the description text to reflect that Playstation 4 controllers are now
supported.

[jkosina@suse.cz: drop the POWER_SUPPLY hunk, as I've already fixed that]
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Sony driver now makes use of power supply support. Make kernel
config aware of it.

Reported-by: fengguang.wu@intel.com
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request, set_raw_report and output_report transport-driver functions to
the HIDP driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add the uhid_output_report transport-driver function to the uhid driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request, set_raw_report and output_report transport-driver functions to
the USB HID driver.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add raw_request and output_report callbacks to the hid_ll_driver struct.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Acked-by: David Herrmann <dh.herrmann@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add output events for the multi-touch pad on the Dualshock 4.

The touchpad has a resolution of 1920x940 and is capable of 2 simultaneous
touches. A 'Type B' stateful slot protocol is implemented as defined in
Documentation/input/multi-touch-protocol.txt

Applications can use the touchpad data by processing the ABS_MT_SLOT,
ABS_MT_TRACKING_ID, ABS_MT_POSITION_X and ABS_MT_POSITION_Y events.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Add battery status reporting for the Sixaxis and Dualshock 4 controllers.
Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID updates from Jiri Kosina:

 - quite some work on hid-sony driver in order to have DualShock 4
   device properly supported, from Frank Praznik

 - fixed support for suspending I2C conntected devices, from Mika
   Westerberg

 - regression fix for 0xff05 usage on Microsoft Ergonomy, from Jiri
   Kosina

 - support for Synaptics HD touchscreen, from AceLan Kao

 - workaround for USB 3.0 problem for logitech-dj connected devices,
   from Benjamin Tisssoires

 - support for Logitech Dual Action pads, from Vitaly Katraew

 - quite a few other assorted fixes and device ID additions

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits)
  HID: sony: Use colors for the Dualshock 4 LED names
  HID: sony: Add annotated HID descriptor for the Dualshock 4
  HID: sony: Cache the output report for the Dualshock 4
  HID: sony: Map gyroscopes and accelerometers to axes
  HID: sony: Fix spacing in the device definitions.
  HID: sony: Use standard output reports instead of raw reports to send data to the Dualshock 4.
  HID: sony: Use separate identifiers for USB and Bluetooth connected Dualshock 4 controllers.
  HID: hid-holtek-mouse: add new a070 mouse
  HID: hid-sensor-hub: Fix buggy report descriptors
  HID: logitech-dj: Fix USB 3.0 issue
  HID: sony: Rename worker function
  HID: sony: Add LED controls for the Dualshock 4
  HID: sony: Add force-feedback support for the Dualshock 4
  HID: hidraw: make comment more accurate and nicer
  HID: sony: fix error return code
  HID: input: fix input sysfs path for hid devices
  HID: debug: add labels for some new buttons
  HID: remove SIS entries from hid_have_special_driver[]
  HID: microsoft: no fallthrough in MS ergonomy 0xff05 usage
  HID: add support for SiS multitouch panel in the touch monitor LG 23ET83V
  ...

Pull device-mapper changes from Mike Snitzer:
 "A lot of attention was paid to improving the thin-provisioning
  target's handling of metadata operation failures and running out of
  space.  A new 'error_if_no_space' feature was added to allow users to
  error IOs rather than queue them when either the data or metadata
  space is exhausted.

  Additional fixes/features include:
   - a few fixes to properly support thin metadata device resizing
   - a solution for reliably waiting for a DM device's embedded kobject
     to be released before destroying the device
   - old dm-snapshot is updated to use the dm-bufio interface to take
     advantage of readahead capabilities that improve snapshot
     activation
   - new dm-cache target tunables to control how quickly data is
     promoted to the cache (fast) device
   - improved write efficiency of cluster mirror target by combining
     userspace flush and mark requests"

* tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits)
  dm log userspace: allow mark requests to piggyback on flush requests
  dm space map metadata: fix bug in resizing of thin metadata
  dm cache: add policy name to status output
  dm thin: fix pool feature parsing
  dm sysfs: fix a module unload race
  dm snapshot: use dm-bufio prefetch
  dm snapshot: use dm-bufio
  dm snapshot: prepare for switch to using dm-bufio
  dm snapshot: use GFP_KERNEL when initializing exceptions
  dm cache: add block sizes and total cache blocks to status output
  dm btree: add dm_btree_find_lowest_key
  dm space map metadata: fix extending the space map
  dm space map common: make sure new space is used during extend
  dm: wait until embedded kobject is released before destroying a device
  dm: remove pointless kobject comparison in dm_get_from_kobject
  dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
  dm cache policy mq: introduce three promotion threshold tunables
  dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD
  dm thin: fix set_pool_mode exposed pool operation races
  dm thin: eliminate the no_free_space flag
  ...

Pull SCSI updates from James Bottomley:
 "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa,
  qla2xxx.  It also removes the aic7xxx_old driver (which has been
  deprecated for nearly a decade) and adds support for deadlines in
  error handling"

* tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits)
  [SCSI] hpsa: allow SCSI mid layer to handle unit attention
  [SCSI] hpsa: do not require board "not ready" status after hard reset
  [SCSI] hpsa: enable unit attention reporting
  [SCSI] hpsa: rename scsi prefetch field
  [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection
  [SCSI] ipr: increase dump size in ipr driver
  [SCSI] mac_scsi: Fix crash on out of memory
  [SCSI] st: fix enlarge_buffer
  [SCSI] qla1280: Annotate timer on stack so object debug does not complain
  [SCSI] qla4xxx: Update driver version to 5.04.00-k3
  [SCSI] qla4xxx: Recreate chap data list during get chap operation
  [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr
  [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct
  [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection
  [SCSI] qla4xxx: Add host statistics support
  [SCSI] scsi_transport_iscsi: Add host statistics support
  [SCSI] qla4xxx: Added support for Diagnostics MBOX command
  [SCSI] bfa: Driver version upgrade to 3.2.23.0
  [SCSI] bfa: change FC_ELS_TOV to 20sec
  [SCSI] bfa: Observed auto D-port mode instead of manual
  ...

Pull PCI updates from Bjorn Helgaas:
 "PCI changes for the v3.14 merge window:

  Resource management
    - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas)
    - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu)
    - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas)
    - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas)
    - Enforce bus address limits in resource allocation (Yinghai Lu)
    - Allocate 64-bit BARs above 4G when possible (Yinghai Lu)
    - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu)

  PCI device hotplug
    - Major rescan/remove locking update (Rafael J. Wysocki)
    - Make ioapic builtin only (not modular) (Yinghai Lu)
    - Fix release/free issues (Yinghai Lu)
    - Clean up pciehp (Bjorn Helgaas)
    - Announce pciehp slot info during enumeration (Bjorn Helgaas)

  MSI
    - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev)
    - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev)
    - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev)
    - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman)
    - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong)

  SR-IOV
    - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao)

  Virtualization
    - Add support for save/restore of extended capabilities (Alex Williamson)
    - Add Virtual Channel to save/restore support (Alex Williamson)
    - Never treat a VF as a multifunction device (Alex Williamson)
    - Add pci_try_reset_function(), et al (Alex Williamson)

  AER
    - Ignore non-PCIe error sources (Betty Dall)
    - Support ACPI HEST error sources for domains other than 0 (Betty Dall)
    - Consolidate HEST error source parsers (Bjorn Helgaas)
    - Add a TLP header print helper (Borislav Petkov)

  Freescale i.MX6
    - Remove unnecessary code (Fabio Estevam)
    - Make reset-gpio optional (Marek Vasut)
    - Report "link up" only after link training completes (Marek Vasut)
    - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut)
    - Fix PCIe startup code (Richard Zhu)

  Marvell MVEBU
    - Remove duplicate of_clk_get_by_name() call (Andrew Lunn)
    - Drop writes to bridge Secondary Status register (Jason Gunthorpe)
    - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe)
    - Support a bridge with no IO port window (Jason Gunthorpe)
    - Use max_t() instead of max(resource_size_t,) (Jingoo Han)
    - Remove redundant of_match_ptr (Sachin Kamat)
    - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni)

  NVIDIA Tegra
    - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower)

  Renesas R-Car
    - Add runtime PM support (Valentine Barshak)
    - Fix rcar_pci_probe() return value check (Wei Yongjun)

  Synopsys DesignWare
    - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen)
    - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen)
    - Fix missing MSI IRQs (Harro Haan)
    - Add dw_pcie prefix before cfg_read/write (Pratyush Anand)
    - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand)
    - Whitespace cleanup (Jingoo Han)

  EISA
    - Call put_device() if device_register() fails (Levente Kurusa)
    - Revert EISA initialization breakage ((Bjorn Helgaas)

  Miscellaneous
    - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger)
    - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas)
    - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas)
    - Use dev_is_pci() to identify PCI devices (Yijing Wang)
    - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches)
    - Update documentation 00-INDEX (Erik Ekman)"

* tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits)
  Revert "EISA: Initialize device before its resources"
  Revert "EISA: Log device resources in dmesg"
  vfio-pci: Use pci "try" reset interface
  PCI: Check parent kobject in pci_destroy_dev()
  xen/pcifront: Use global PCI rescan-remove locking
  powerpc/eeh: Use global PCI rescan-remove locking
  PCI: Fix pci_check_and_unmask_intx() comment typos
  PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus()
  MPT / PCI: Use pci_stop_and_remove_bus_device_locked()
  platform / x86: Use global PCI rescan-remove locking
  PCI: hotplug: Use global PCI rescan-remove locking
  pcmcia: Use global PCI rescan-remove locking
  ACPI / hotplug / PCI: Use global PCI rescan-remove locking
  ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug
  PCI: Add global pci_lock_rescan_remove()
  PCI: Cleanup pci.h whitespace
  PCI: Reorder so actual code comes before stubs
  PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0
  ACPICA: Add helper macros to extract bus/segment numbers from HEST table.
  PCI: Make local functions static
  ...

Pull tracing updates from Steven Rostedt:
 "This pull request has a new feature to ftrace, namely the trace event
  triggers by Tom Zanussi.  A trigger is a way to enable an action when
  an event is hit.  The actions are:

   o  trace on/off - enable or disable tracing
   o  snapshot     - save the current trace buffer in the snapshot
   o  stacktrace   - dump the current stack trace to the ringbuffer
   o  enable/disable events - enable or disable another event

  Namhyung Kim added updates to the tracing uprobes code.  Having the
  uprobes add support for fetch methods.

  The rest are various bug fixes with the new code, and minor ones for
  the old code"

* tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits)
  tracing: Fix buggered tee(2) on tracing_pipe
  tracing: Have trace buffer point back to trace_array
  ftrace: Fix synchronization location disabling and freeing ftrace_ops
  ftrace: Have function graph only trace based on global_ops filters
  ftrace: Synchronize setting function_trace_op with ftrace_trace_function
  tracing: Show available event triggers when no trigger is set
  tracing: Consolidate event trigger code
  tracing: Fix counter for traceon/off event triggers
  tracing: Remove double-underscore naming in syscall trigger invocations
  tracing/kprobes: Add trace event trigger invocations
  tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT
  tracing/uprobes: Add @+file_offset fetch method
  uprobes: Allocate ->utask before handler_chain() for tracing handlers
  tracing/uprobes: Add support for full argument access methods
  tracing/uprobes: Fetch args before reserving a ring buffer
  tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg()
  tracing/probes: Implement 'memory' fetch method for uprobes
  tracing/probes: Add fetch{,_size} member into deref fetch method
  tracing/probes: Move 'symbol' fetch method to kprobes
  tracing/probes: Implement 'stack' fetch method for uprobes
  ...

Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus

In the cluster evironment, cluster write has poor performance because
userspace_flush() has to contact a userspace program (cmirrord) for
clear/mark/flush requests.  But both mark and flush requests require
cmirrord to communicate the message to all the cluster nodes for each
flush call.  This behaviour is really slow.

To address this we now merge mark and flush requests together to reduce
the kernel-userspace-kernel time.  We allow a new directive,
"integrated_flush" that can be used to instruct the kernel log code to
combine flush and mark requests when directed by userspace.  If not
directed by userspace (due to an older version of the userspace code
perhaps), the kernel will function as it did previously - preserving
backwards compatibility.  Additionally, flush requests are performed
lazily when only clear requests exist.
Signed-off-by: Dongmao Zhang <dmzhang@suse.com>
Signed-off-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge first patch-bomb from Andrew Morton:

 - a couple of misc things

 - inotify/fsnotify work from Jan

 - ocfs2 updates (partial)

 - about half of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits)
  mm/migrate: remove unused function, fail_migrate_page()
  mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages
  mm/migrate: correct failure handling if !hugepage_migration_support()
  mm/migrate: add comment about permanent failure path
  mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure
  mm: compaction: reset scanner positions immediately when they meet
  mm: compaction: do not mark unmovable pageblocks as skipped in async compaction
  mm: compaction: detect when scanners meet in isolate_freepages
  mm: compaction: reset cached scanner pfn's before reading them
  mm: compaction: encapsulate defer reset logic
  mm: compaction: trace compaction begin and end
  memcg, oom: lock mem_cgroup_print_oom_info
  sched: add tracepoints related to NUMA task migration
  mm: numa: do not automatically migrate KSM pages
  mm: numa: trace tasks that fail migration due to rate limiting
  mm: numa: limit scope of lock for NUMA migrate rate limiting
  mm: numa: make NUMA-migrate related functions static
  lib/show_mem.c: show num_poisoned_pages when oom
  mm/hwpoison: add '#' to hwpoison_inject
  mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter
  ...