- 23 Mar, 2023 1 commit
-
-
Dhruva Gole authored
Due to the potential failure of enable_irq_wake(), it would be better to return error if it fails. Fixes: b09d6335 ("rtc: Introduce ti-k3-rtc") Cc: Nishanth Menon <nm@ti.com> Signed-off-by:
Dhruva Gole <d-gole@ti.com> Link: https://lore.kernel.org/r/20230323085904.957999-1-d-gole@ti.comSigned-off-by:
Alexandre Belloni <alexandre.belloni@bootlin.com>
-
- 21 Mar, 2023 2 commits
-
-
Martin Blumenstingl authored
The VRTC alarm register can be programmed with an amount of seconds after which the SoC will be woken up by the VRTC timer again. We are already converting the alarm time from meson_vrtc_set_alarm() to "seconds since 1970". This means we also need to use "seconds since 1970" for the current time. This fixes a problem where setting the alarm to one minute in the future results in the firmware (which handles wakeup) to output (on the serial console) that the system will be woken up in billions of seconds. ktime_get_raw_ts64() returns the time since boot, not since 1970. Switch to ktime_get_real_ts64() to fix the calculation of the alarm time and to make the SoC wake up at the specified date/time. Also the firmware (which manages suspend) now prints either 59 or 60 seconds until wakeup (depending on how long it takes for the system to enter suspend). Fixes: 6ef35398 ("rtc: Add Amlogic Virtual Wake RTC") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Reviewed-by:
Kevin Hilman <khilman@baylibre.com> Link: https://lore.kernel.org/r/20230320212142.2355062-1-martin.blumenstingl@googlemail.comSigned-off-by:
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Acked-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230317233634.3968656-1-robh@kernel.orgSigned-off-by:
-
- 17 Mar, 2023 37 commits
-
-
Javier Carrasco authored
The value variable is initialized to 0 and it is not used to set any other bits rather than the one that defines the capacitor value. Setting this capacitor value is the only purpose of the function where the variable is defined and therefore the OR operation does not apply as a way to foresee functionality extensions either. Signed-off-by:
Javier Carrasco <javier.carrasco@wolfvision.net> Link: https://lore.kernel.org/r/20230315082021.2104452-3-javier.carrasco@wolfvision.netSigned-off-by:
-
Javier Carrasco authored
Minor modifications for coding-style correctness (tabs, spaces and blank lines before and after brackets). In total 7 errors, 3 warnings and 1 check where removed from the checkpatch output without damaging code readability. Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/rtc/rtc-ds1390.c:216:34: error: ‘ds1390_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
Non-static functions should have a prototype: drivers/rtc/rtc-omap.c:410:5: error: no previous prototype for ‘omap_rtc_power_off_program’ [-Werror=missing-prototypes] Fixes: 6256f7f7 ("rtc: OMAP: Add support for rtc-only mode") Signed-off-by:
-
Rob Herring authored
It is preferred to use typed property access functions (i.e. of_property_read_<type> functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Link: https://lore.kernel.org/r/20230310144736.1547041-1-robh@kernel.orgSigned-off-by:
-
Conor Dooley authored
As part of converting RISC-V SOC_FOO symbols to ARCH_FOO to match the use of such symbols on other architectures, convert the Microchip FPGA RTC driver to use the new symbol. Signed-off-by:
Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20230309204452.969574-5-conor@kernel.orgSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230304133028.2135435-42-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20230304133028.2135435-40-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230304133028.2135435-29-u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Link: https://lore.kernel.org/r/20230304133028.2135435-12-u.kleine-koenig@pengutronix.deSigned-off-by:
-
