Disable Venus by default to allow booting without closed firmware and
enable it on the boards that didn't previously disable it. This commit
brings no functional difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-7-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Disable them by default to allow for booting without a display
and proprietary firmware. Then, enable them on boards that didn't
previously disable them. Hence, this commit brings no functional
difference.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-6-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add the fifth and sixth I2C host on the second BLSP, used for
various board-specific peripherals.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-5-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add SDHCI1 device to allow for usage of (more often than not) eMMC.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-4-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Set the tcsr_mutex_regs size to 0x40000 to allow for accessing
all required registers that will be needed to support modem.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-3-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

QUP and UART names start from 1. There are 6 QUPs and 2 UARTs
per BLSP. Let's not further confuse programmers by stating
otherwise.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-2-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

In order to prepare for feature development, the DTs
have to be workable with.. To achieve that:

- Rename msmgpio to tlmm (consistency with newer DTs)
- Rid msm8996-pins.dtsi and add the contents to msm8996.dtsi
- Modernize the pin nodes, make them more concise
- Add generic pin configuration for some hardware
- Fix up some names in preparation for BLSP/UART name cleaning..
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210228130831.203765-1-konrad.dybcio@somainline.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add initial support for IPQ8074 SoC based HK10-C1
and HK10-C2 evaluation boards.
Signed-off-by: Gokul Sriram Palanisamy <gokulsri@codeaurora.org>
Link: https://lore.kernel.org/r/1614328110-28866-2-git-send-email-gokulsri@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Disable ADSP by default and enable it in devices that use it.
Also add CX power domain.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/Epn1vFjJb0oQhqMYxspzL6X1N6MPcDT1f9oVVOjXc@cp3-web-020.plabs.chSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

qcom camera driver allocates the ICP firmware memory
dynamically, so the carveout region is unnecessary.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20210525133242.188603-1-senozhatsky@chromium.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

This patch adds audio support for Xiaomi Poco F1 phone. Phone's primary
Mic and 3.5mm Headphone jack are handled through the SDM845 sound card
and WCD9340 codec.
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Joel Selvaraj <jo@jsfamily.in>
Link: https://lore.kernel.org/r/BN6PR2001MB17966ED1D787FA3F4B90A1A7D95B9@BN6PR2001MB1796.namprd20.prod.outlook.comSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable the ipa node so that we can bring up mobile data.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210502014146.85642-5-caleb@connolly.techSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

The rmtfs_mem region is a weird one, downstream allocates it
dynamically, and supports a "qcom,guard-memory" property which when set
will reserve 4k above and below the rmtfs memory.

A common from qcom 4.9 kernel msm_sharedmem driver:

/*
 * If guard_memory is set, then the shared memory region
 * will be guarded by SZ_4K at the start and at the end.
 * This is needed to overcome the XPU limitation on few
 * MSM HW, so as to make this memory not contiguous with
 * other allocations that may possibly happen from other
 * clients in the system.
*/

When the kernel tries to touch memory that is too close the
rmtfs region it may cause an XPU violation. Such is the case on the
OnePlus 6 where random crashes would occur usually after boot.

Reserve 4k above and below the rmtfs_mem to avoid hitting these XPU
Violations.

This doesn't entirely solve the random crashes on the OnePlus 6/6T but
it does seem to prevent the ones which happen shortly after modem
bringup.

Fixes: 288ef8a4 ("arm64: dts: sdm845: add oneplus6/6t devices")
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Link: https://lore.kernel.org/r/20210502014146.85642-4-caleb@connolly.techSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add nodes for IDP display. The display is Visionox RM69299.
Signed-off-by: Harigovindan P <harigovi@codeaurora.org>
Link: https://lore.kernel.org/r/20200629135144.8265-1-harigovi@codeaurora.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Enable IPA for the SM8350 MTP.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210413170553.1778792-3-elder@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Add IPA-related nodes and definitions to "sm8350.dtsi", which uses
IPA v4.9.
Signed-off-by: Alex Elder <elder@linaro.org>
Link: https://lore.kernel.org/r/20210413170553.1778792-2-elder@linaro.orgSigned-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Commit b9d79e4c ("fbmem: Mark proc_fb_seq_ops as __maybe_unused")
places the '__maybe_unused' in an entirely incorrect location between
the "struct" keyword and the structure name.

It's a wonder that gcc accepts that silently, but clang quite reasonably
warns about it:

    drivers/video/fbdev/core/fbmem.c:736:21: warning: attribute declaration must precede definition [-Wignored-attributes]
    static const struct __maybe_unused seq_operations proc_fb_seq_ops = {
                        ^

Fix it.

Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull drm fixes from Dave Airlie:
 "Bit later than usual, I queued them all up on Friday then promptly
  forgot to write the pull request email. This is mainly amdgpu fixes,
  with some radeon/msm/fbdev and one i915 gvt fix thrown in.

  amdgpu:
   - MPO hang workaround
   - Fix for concurrent VM flushes on vega/navi
   - dcefclk is not adjustable on navi1x and newer
   - MST HPD debugfs fix
   - Suspend/resumes fixes
   - Register VGA clients late in case driver fails to load
   - Fix GEM leak in user framebuffer create
   - Add support for polaris12 with 32 bit memory interface
   - Fix duplicate cursor issue when using overlay
   - Fix corruption with tiled surfaces on VCN3
   - Add BO size and stride check to fix BO size verification

  radeon:
   - Fix off-by-one in power state parsing
   - Fix possible memory leak in power state parsing

  msm:
   - NULL ptr dereference fix

  fbdev:
   - procfs disabled warning fix

  i915:
   - gvt: Fix a possible division by zero in vgpu display rate
     calculation"

* tag 'drm-next-2021-05-10' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: Use device specific BO size & stride check.
  drm/amdgpu: Init GFX10_ADDR_CONFIG for VCN v3 in DPG mode.
  drm/amd/pm: initialize variable
  drm/radeon: Avoid power table parsing memory leaks
  drm/radeon: Fix off-by-one power_state index heap overwrite
  drm/amd/display: Fix two cursor duplication when using overlay
  drm/amdgpu: add new MC firmware for Polaris12 32bit ASIC
  fbmem: Mark proc_fb_seq_ops as __maybe_unused
  drm/msm/dpu: Delete bonkers code
  drm/i915/gvt: Prevent divided by zero when calculating refresh rate
  amdgpu: fix GEM obj leak in amdgpu_display_user_framebuffer_create
  drm/amdgpu: Register VGA clients after init can no longer fail
  drm/amdgpu: Handling of amdgpu_device_resume return value for graceful teardown
  drm/amdgpu: fix r initial values
  drm/amd/display: fix wrong statement in mst hpd debugfs
  amdgpu/pm: set pp_dpm_dcefclk to readonly on NAVI10 and newer gpus
  amdgpu/pm: Prevent force of DCEFCLK on NAVI10 and SIENNA_CICHLID
  drm/amdgpu: fix concurrent VM flushes on Vega/Navi v2
  drm/amd/display: Reject non-zero src_y and src_x for video planes

Pull block fix from Jens Axboe:
 "Turns out the bio max size change still has issues, so let's get it
  reverted for 5.13-rc1. We'll shake out the issues there and defer it
  to 5.14 instead"

* tag 'block-5.13-2021-05-09' of git://git.kernel.dk/linux-block:
  Revert "bio: limit bio max size"

Pull cifs fixes from Steve French:
 "Three small SMB3 chmultichannel related changesets (also for stable)
  from the SMB3 test event this week.

  The other fixes are still in review/testing"

* tag '5.13-rc-smb3-part3' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: if max_channels set to more than one channel request multichannel
  smb3: do not attempt multichannel to server which does not support it
  smb3: when mounting with multichannel include it in requested capabilities

Pull scheduler fixes from Thomas Gleixner:
 "A set of scheduler updates:

   - Prevent PSI state corruption when schedule() races with cgroup
     move.

     A recent commit combined two PSI callbacks to reduce the number of
     cgroup tree updates, but missed that schedule() can drop rq::lock
     for load balancing, which opens the race window for
     cgroup_move_task() which then observes half updated state.

     The fix is to solely use task::ps_flags instead of looking at the
     potentially mismatching scheduler state

   - Prevent an out-of-bounds access in uclamp caused bu a rounding
     division which can lead to an off-by-one error exceeding the
     buckets array size.

   - Prevent unfairness caused by missing load decay when a task is
     attached to a cfs runqueue.

     The old load of the task was attached to the runqueue and never
     removed. Fix it by enforcing the load update through the hierarchy
     for unthrottled run queue instances.

   - A documentation fix fot the 'sched_verbose' command line option"

* tag 'sched-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix unfairness caused by missing load decay
  sched: Fix out-of-bound access in uclamp
  psi: Fix psi state corruption when schedule() races with cgroup move
  sched,doc: sched_debug_verbose cmdline should be sched_verbose

Pull locking fixes from Thomas Gleixner:
 "A set of locking related fixes and updates:

   - Two fixes for the futex syscall related to the timeout handling.

     FUTEX_LOCK_PI does not support the FUTEX_CLOCK_REALTIME bit and
     because it's not set the time namespace adjustment for clock
     MONOTONIC is applied wrongly.

     FUTEX_WAIT cannot support the FUTEX_CLOCK_REALTIME bit because its
     always a relative timeout.

   - Cleanups in the futex syscall entry points which became obvious
     when the two timeout handling bugs were fixed.

   - Cleanup of queued_write_lock_slowpath() as suggested by Linus

   - Fixup of the smp_call_function_single_async() prototype"

* tag 'locking-urgent-2021-05-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Make syscall entry points less convoluted
  futex: Get rid of the val2 conditional dance
  futex: Do not apply time namespace adjustment on FUTEX_LOCK_PI
  Revert 337f1304 ("futex: Allow FUTEX_CLOCK_REALTIME with FUTEX_WAIT op")
  locking/qrwlock: Cleanup queued_write_lock_slowpath()
  smp: Fix smp_call_function_single_async prototype

Pull x86 perf fix from Borislav Petkov:
 "Handle power-gating of AMD IOMMU perf counters properly when they are
  used"

* tag 'perf_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/events/amd/iommu: Fix invalid Perf result due to IOMMU PMC power-gating

Pull x86 fixes from Borislav Petkov:
 "A bunch of things accumulated for x86 in the last two weeks:

   - Fix guest vtime accounting so that ticks happening while the guest
     is running can also be accounted to it. Along with a consolidation
     to the guest-specific context tracking helpers.

   - Provide for the host NMI handler running after a VMX VMEXIT to be
     able to run on the kernel stack correctly.

   - Initialize MSR_TSC_AUX when RDPID is supported and not RDTSCP (virt
     relevant - real hw supports both)

   - A code generation improvement to TASK_SIZE_MAX through the use of
     alternatives

   - The usual misc and related cleanups and improvements"

* tag 'x86_urgent_for_v5.13_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM: x86: Consolidate guest enter/exit logic to common helpers
  context_tracking: KVM: Move guest enter/exit wrappers to KVM's domain
  context_tracking: Consolidate guest enter/exit wrappers
  sched/vtime: Move guest enter/exit vtime accounting to vtime.h
  sched/vtime: Move vtime accounting external declarations above inlines
  KVM: x86: Defer vtime accounting 'til after IRQ handling
  context_tracking: Move guest exit vtime accounting to separate helpers
  context_tracking: Move guest exit context tracking to separate helpers
  KVM/VMX: Invoke NMI non-IST entry instead of IST entry
  x86/cpu: Remove write_tsc() and write_rdtscp_aux() wrappers
  x86/cpu: Initialize MSR_TSC_AUX if RDTSCP *or* RDPID is supported
  x86/resctrl: Fix init const confusion
  x86: Delete UD0, UD1 traces
  x86/smpboot: Remove duplicate includes
  x86/cpu: Use alternative to generate the TASK_SIZE_MAX constant

This reverts commit cd2c7545.

Alex reports that the commit causes corruption with LUKS on ext4. Revert
it for now so that this can be investigated properly.

Link: https://lore.kernel.org/linux-block/1620493841.bxdq8r5haw.none@localhost/Reported-by: Alex Xu (Hello71) <alex_y_xu@yahoo.ca>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull RISC-V fixes from Palmer Dabbelt:

 - A fix to avoid over-allocating the kernel's mapping on !MMU systems,
   which could lead to up to 2MiB of lost memory

 - The SiFive address extension errata only manifest on rv64, they are
   now disabled on rv32 where they are unnecessary

 - A pair of late-landing cleanups

* tag 'riscv-for-linus-5.13-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: remove unused handle_exception symbol
  riscv: Consistify protect_kernel_linear_mapping_text_rodata() use
  riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y
  riscv: Only extend kernel reservation if mapped read-only

intel_dp_check_mst_status() uses a 14-byte array to read the DPRX Event
Status Indicator data, but then passes that buffer at offset 10 off as
an argument to drm_dp_channel_eq_ok().

End result: there are only 4 bytes remaining of the buffer, yet
drm_dp_channel_eq_ok() wants a 6-byte buffer.  gcc-11 correctly warns
about this case:

  drivers/gpu/drm/i915/display/intel_dp.c: In function ‘intel_dp_check_mst_status’:
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: warning: ‘drm_dp_channel_eq_ok’ reading 6 bytes from a region of size 4 [-Wstringop-overread]
   3491 |                     !drm_dp_channel_eq_ok(&esi[10], intel_dp->lane_count)) {
        |                      ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  drivers/gpu/drm/i915/display/intel_dp.c:3491:22: note: referencing argument 1 of type ‘const u8 *’ {aka ‘const unsigned char *’}
  In file included from drivers/gpu/drm/i915/display/intel_dp.c:38:
  include/drm/drm_dp_helper.h:1466:6: note: in a call to function ‘drm_dp_channel_eq_ok’
   1466 | bool drm_dp_channel_eq_ok(const u8 link_status[DP_LINK_STATUS_SIZE],
        |      ^~~~~~~~~~~~~~~~~~~~
       6:14 elapsed

This commit just extends the original array by 2 zero-initialized bytes,
avoiding the warning.

There may be some underlying bug in here that caused this confusion, but
this is at least no worse than the existing situation that could use
random data off the stack.

Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull more SCSI updates from James Bottomley:
 "This is a set of minor fixes in various drivers (qla2xxx, ufs,
  scsi_debug, lpfc) one doc fix and a fairly large update to the fnic
  driver to remove the open coded iteration functions in favour of the
  scsi provided ones"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Use scsi_host_busy_iter() to traverse commands
  scsi: fnic: Kill 'exclude_id' argument to fnic_cleanup_io()
  scsi: scsi_debug: Fix cmd_per_lun, set to max_queue
  scsi: ufs: core: Narrow down fast path in system suspend path
  scsi: ufs: core: Cancel rpm_dev_flush_recheck_work during system suspend
  scsi: ufs: core: Do not put UFS power into LPM if link is broken
  scsi: qla2xxx: Prevent PRLI in target mode
  scsi: qla2xxx: Add marginal path handling support
  scsi: target: tcmu: Return from tcmu_handle_completions() if cmd_id not found
  scsi: ufs: core: Fix a typo in ufs-sysfs.c
  scsi: lpfc: Fix bad memory access during VPD DUMP mailbox command
  scsi: lpfc: Fix DMA virtual address ptr assignment in bsg
  scsi: lpfc: Fix illegal memory access on Abort IOCBs
  scsi: blk-mq: Fix build warning when making htmldocs

Pull more Kbuild updates from Masahiro Yamada:

 - Convert sh and sparc to use generic shell scripts to generate the
   syscall headers

 - refactor .gitignore files

 - Update kernel/config_data.gz only when the content of the .config
   is really changed, which avoids the unneeded re-link of vmlinux

 - move "remove stale files" workarounds to scripts/remove-stale-files

 - suppress unused-but-set-variable warnings by default for Clang
   as well

 - fix locale setting LANG=C to LC_ALL=C

 - improve 'make distclean'

 - always keep intermediate objects from scripts/link-vmlinux.sh

 - move IF_ENABLED out of <linux/kconfig.h> to make it self-contained

 - misc cleanups

* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
  linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
  kbuild: Don't remove link-vmlinux temporary files on exit/signal
  kbuild: remove the unneeded comments for external module builds
  kbuild: make distclean remove tag files in sub-directories
  kbuild: make distclean work against $(objtree) instead of $(srctree)
  kbuild: refactor modname-multi by using suffix-search
  kbuild: refactor fdtoverlay rule
  kbuild: parameterize the .o part of suffix-search
  arch: use cross_compiling to check whether it is a cross build or not
  kbuild: remove ARCH=sh64 support from top Makefile
  .gitignore: prefix local generated files with a slash
  kbuild: replace LANG=C with LC_ALL=C
  Makefile: Move -Wno-unused-but-set-variable out of GCC only block
  kbuild: add a script to remove stale generated files
  kbuild: update config_data.gz only when the content of .config is changed
  .gitignore: ignore only top-level modules.builtin
  .gitignore: move tags and TAGS close to other tag files
  kernel/.gitgnore: remove stale timeconst.h and hz.bc
  usr/include: refactor .gitignore
  genksyms: fix stale comment
  ...

Mounting with "multichannel" is obviously implied if user requested
more than one channel on mount (ie mount parm max_channels>1).
Currently both have to be specified. Fix that so that if max_channels
is greater than 1 on mount, enable multichannel rather than silently
falling back to non-multichannel.
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.11+
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>

We were ignoring CAP_MULTI_CHANNEL in the server response - if the
server doesn't support multichannel we should not be attempting it.

See MS-SMB2 section 3.2.5.2
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-By: Tom Talpey <tom@talpey.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull powerpc updates and fixes from Michael Ellerman:
 "A bit of a mixture of things, tying up some loose ends.

  There's the removal of the nvlink code, which dependend on a commit in
  the vfio tree. Then the enablement of huge vmalloc which was in next
  for a few weeks but got dropped due to conflicts. And there's also a
  few fixes.

  Summary:

   - Remove the nvlink support now that it's only user has been removed.

   - Enable huge vmalloc mappings for Radix MMU (P9).

   - Fix KVM conversion to gfn-based MMU notifier callbacks.

   - Fix a kexec/kdump crash with hot plugged CPUs.

   - Fix boot failure on 32-bit with CONFIG_STACKPROTECTOR.

   - Restore alphabetic order of the selects under CONFIG_PPC.

  Thanks to: Christophe Leroy, Christoph Hellwig, Nicholas Piggin,
  Sandipan Das, and Sourabh Jain"

* tag 'powerpc-5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  KVM: PPC: Book3S HV: Fix conversion to gfn-based MMU notifier callbacks
  powerpc/kconfig: Restore alphabetic order of the selects under CONFIG_PPC
  powerpc/32: Fix boot failure with CONFIG_STACKPROTECTOR
  powerpc/powernv/memtrace: Fix dcache flushing
  powerpc/kexec_file: Use current CPU info while setting up FDT
  powerpc/64s/radix: Enable huge vmalloc mappings
  powerpc/powernv: remove the nvlink support

In the SMB3/SMB3.1.1 negotiate protocol request, we are supposed to
advertise CAP_MULTICHANNEL capability when establishing multiple
channels has been requested by the user doing the mount. See MS-SMB2
sections 2.2.3 and 3.2.5.2

Without setting it there is some risk that multichannel could fail
if the server interpreted the field strictly.
Reviewed-By: Tom Talpey <tom@talpey.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Steve French <stfrench@microsoft.com>

Pull networking fixes from Jakub Kicinski:
 "Networking fixes for 5.13-rc1, including fixes from bpf, can and
  netfilter trees. Self-contained fixes, nothing risky.

  Current release - new code bugs:

   - dsa: ksz: fix a few bugs found by static-checker in the new driver

   - stmmac: fix frame preemption handshake not triggering after
     interface restart

  Previous releases - regressions:

   - make nla_strcmp handle more then one trailing null character

   - fix stack OOB reads while fragmenting IPv4 packets in openvswitch
     and net/sched

   - sctp: do asoc update earlier in sctp_sf_do_dupcook_a

   - sctp: delay auto_asconf init until binding the first addr

   - stmmac: clear receive all(RA) bit when promiscuous mode is off

   - can: mcp251x: fix resume from sleep before interface was brought up

  Previous releases - always broken:

   - bpf: fix leakage of uninitialized bpf stack under speculation

   - bpf: fix masking negation logic upon negative dst register

   - netfilter: don't assume that skb_header_pointer() will never fail

   - only allow init netns to set default tcp cong to a restricted algo

   - xsk: fix xp_aligned_validate_desc() when len == chunk_size to avoid
     false positive errors

   - ethtool: fix missing NLM_F_MULTI flag when dumping

   - can: m_can: m_can_tx_work_queue(): fix tx_skb race condition

   - sctp: fix a SCTP_MIB_CURRESTAB leak in sctp_sf_do_dupcook_b

   - bridge: fix NULL-deref caused by a races between assigning
     rx_handler_data and setting the IFF_BRIDGE_PORT bit

  Latecomer:

   - seg6: add counters support for SRv6 Behaviors"

* tag 'net-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  atm: firestream: Use fallthrough pseudo-keyword
  net: stmmac: Do not enable RX FIFO overflow interrupts
  mptcp: fix splat when closing unaccepted socket
  i40e: Remove LLDP frame filters
  i40e: Fix PHY type identifiers for 2.5G and 5G adapters
  i40e: fix the restart auto-negotiation after FEC modified
  i40e: Fix use-after-free in i40e_client_subtask()
  i40e: fix broken XDP support
  netfilter: nftables: avoid potential overflows on 32bit arches
  netfilter: nftables: avoid overflows in nft_hash_buckets()
  tcp: Specify cmsgbuf is user pointer for receive zerocopy.
  mlxsw: spectrum_mr: Update egress RIF list before route's action
  net: ipa: fix inter-EE IRQ register definitions
  can: m_can: m_can_tx_work_queue(): fix tx_skb race condition
  can: mcp251x: fix resume from sleep before interface was brought up
  can: mcp251xfd: mcp251xfd_probe(): add missing can_rx_offload_del() in error path
  can: mcp251xfd: mcp251xfd_probe(): fix an error pointer dereference in probe
  netfilter: nftables: Fix a memleak from userdata error path in new objects
  netfilter: remove BUG_ON() after skb_header_pointer()
  netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
  ...

<linux/kconfig.h> is included from all the kernel-space source files,
including C, assembly, linker scripts. It is intended to contain a
minimal set of macros to evaluate CONFIG options.

IF_ENABLED() is an intruder here because (x ? y : z) is C code, which
should not be included from assembly files or linker scripts.

Also, <linux/kconfig.h> is no longer self-contained because NULL is
defined in <linux/stddef.h>.

Move IF_ENABLED() out to <linux/kernel.h> as PTR_IF(). PTF_IF()
takes the general boolean expression instead of a CONFIG option
so that it fits better in <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>

Merge master back into next, this allows us to resolve some conflicts in
arch/powerpc/Kconfig, and also re-sort the symbols under config PPC so
that they are in alphabetical order again.

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Add SECMARK revision 1 to fix incorrect layout that prevents
   from remove rule with this target, from Phil Sutter.

2) Fix pernet exit path spat in arptables, from Florian Westphal.

3) Missing rcu_read_unlock() for unknown nfnetlink callbacks,
   reported by syzbot, from Eric Dumazet.

4) Missing check for skb_header_pointer() NULL pointer in
   nfnetlink_osf.

5) Remove BUG_ON() after skb_header_pointer() from packet path
   in several conntrack helper and the TCP tracker.

6) Fix memleak in the new object error path of userdata.

7) Avoid overflows in nft_hash_buckets(), reported by syzbot,
   also from Eric.

8) Avoid overflows in 32bit arches, from Eric.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables: avoid potential overflows on 32bit arches
  netfilter: nftables: avoid overflows in nft_hash_buckets()
  netfilter: nftables: Fix a memleak from userdata error path in new objects
  netfilter: remove BUG_ON() after skb_header_pointer()
  netfilter: nfnetlink_osf: Fix a missing skb_header_pointer() NULL check
  netfilter: nfnetlink: add a missing rcu_read_unlock()
  netfilter: arptables: use pernet ops struct during unregister
  netfilter: xt_SECMARK: add new revision to fix structure layout
====================

Link: https://lore.kernel.org/r/20210507174739.1850-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Nguyen, Anthony L says:

====================
Intel Wired LAN Driver Updates 2021-05-07

This series contains updates to i40e driver only.

Magnus fixes XDP by adding and correcting checks that were caused by a
previous commit which introduced a new variable but did not account for
it in all paths.

Yunjian Wang adds a return in an error path to prevent reading a freed
pointer.

Jaroslaw forces link reset when changing FEC so that changes take
affect.

Mateusz fixes PHY types for 2.5G and 5G as there is a differentiation on
PHY identifiers based on operation.

Arkadiusz removes filtering of LLDP frames for software DCB as this is
preventing them from being properly transmitted.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Remove LLDP frame filters
  i40e: Fix PHY type identifiers for 2.5G and 5G adapters
  i40e: fix the restart auto-negotiation after FEC modified
  i40e: Fix use-after-free in i40e_client_subtask()
  i40e: fix broken XDP support
====================

Link: https://lore.kernel.org/r/20210507164151.2878147-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add pseudo-keyword macro fallthrough[1]

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Wei Ming Chen <jj251510319013@gmail.com>
Link: https://lore.kernel.org/r/20210507123843.10602-1-jj251510319013@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>