- 16 Jun, 2021 6 commits
-
-
Chengyang Fan authored
BUG: memory leak unreferenced object 0xffff888101bc4c00 (size 32): comm "syz-executor527", pid 360, jiffies 4294807421 (age 19.329s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 01 00 00 00 00 00 00 00 ac 14 14 bb 00 00 02 00 ................ backtrace: [<00000000f17c5244>] kmalloc include/linux/slab.h:558 [inline] [<00000000f17c5244>] kzalloc include/linux/slab.h:688 [inline] [<00000000f17c5244>] ip_mc_add1_src net/ipv4/igmp.c:1971 [inline] [<00000000f17c5244>] ip_mc_add_src+0x95f/0xdb0 net/ipv4/igmp.c:2095 [<000000001cb99709>] ip_mc_source+0x84c/0xea0 net/ipv4/igmp.c:2416 [<0000000052cf19ed>] do_ip_setsockopt net/ipv4/ip_sockglue.c:1294 [inline] [<0000000052cf19ed>] ip_setsockopt+0x114b/0x30c0 net/ipv4/ip_sockglue.c:1423 [<00000000477edfbc>] raw_setsockopt+0x13d/0x170 net/ipv4/raw.c:857 [<00000000e75ca9bb>] __sys_setsockopt+0x158/0x270 net/socket.c:2117 [<00000000bdb993a8>] __do_sys_setsockopt net/socket.c:2128 [inline] [<00000000bdb993a8>] __se_sys_setsockopt net/socket.c:2125 [inline] [<00000000bdb993a8>] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2125 [<000000006a1ffdbd>] do_syscall_64+0x40/0x80 arch/x86/entry/common.c:47 [<00000000b11467c4>] entry_SYSCALL_64_after_hwframe+0x44/0xae In commit 24803f38 ("igmp: do not remove igmp souce list info when set link down"), the ip_mc_clear_src() in ip_mc_destroy_dev() was removed, because it was also called in igmpv3_clear_delrec(). Rough callgraph: inetdev_destroy -> ip_mc_destroy_dev -> igmpv3_clear_delrec -> ip_mc_clear_src -> RCU_INIT_POINTER(dev->ip_ptr, NULL) However, ip_mc_clear_src() called in igmpv3_clear_delrec() doesn't release in_dev->mc_list->sources. And RCU_INIT_POINTER() assigns the NULL to dev->ip_ptr. As a result, in_dev cannot be obtained through inetdev_by_index() and then in_dev->mc_list->sources cannot be released by ip_mc_del1_src() in the sock_close. Rough call sequence goes like: sock_close -> __sock_release -> inet_release -> ip_mc_drop_socket -> inetdev_by_index -> ip_mc_leave_src -> ip_mc_del_src -> ip_mc_del1_src So we still need to call ip_mc_clear_src() in ip_mc_destroy_dev() to free in_dev->mc_list->sources. Fixes: 24803f38 ("igmp: do not remove igmp souce list info ...") Reported-by:Hulk Robot <hulkci@huawei.com> Signed-off-by:
Chengyang Fan <cy.fan@huawei.com> Acked-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Joakim Zhang says: ==================== net: fixes for fec ptp Small fixes for fec ptp. ==================== Signed-off-by: -
Joakim Zhang authored
Commit da722186 ("net: fec: set GPR bit on suspend by DT configuration.") refactor the fec_devtype, need adjust ptp driver accordingly. Fixes: da722186 ("net: fec: set GPR bit on suspend by DT configuration.") Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
-
Fugang Duan authored
Add clock rate zero check to fix coverity issue of "divide by 0". Fixes: commit 85bd1798 ("net: fec: fix spin_lock dead lock") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
-
Dongliang Mu authored
The commit 46a8b29c ("net: usb: fix memory leak in smsc75xx_bind") fails to clean up the work scheduled in smsc75xx_reset-> smsc75xx_set_multicast, which leads to use-after-free if the work is scheduled to start after the deallocation. In addition, this patch also removes a dangling pointer - dev->data[0]. This patch calls cancel_work_sync to cancel the scheduled work and set the dangling pointer to NULL. Fixes: 46a8b29c ("net: usb: fix memory leak in smsc75xx_bind") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by:
-
Joakim Zhang authored
Platform drivers may call stmmac_probe_config_dt() to parse dt, could call stmmac_remove_config_dt() in error handing after dt parsed, so need disable clocks in stmmac_remove_config_dt(). Go through all platforms drivers which use stmmac_probe_config_dt(), none of them disable clocks manually, so it's safe to disable them in stmmac_remove_config_dt(). Fixes: commit d2ed0a77 ("net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks") Signed-off-by:
-
- 15 Jun, 2021 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2021-06-15 The following pull-request contains BPF updates for your *net* tree. We've added 5 non-merge commits during the last 11 day(s) which contain a total of 10 files changed, 115 insertions(+), 16 deletions(-). The main changes are: 1) Fix marking incorrect umem ring as done in libbpf's xsk_socket__create_shared() helper, from Kev Jackson. 2) Fix oob leakage under a spectre v1 type confusion attack, from Daniel Borkmann. ==================== Signed-off-by: -
Aleksander Jan Bajkowski authored
The previous commit didn't fix the bug properly. By mistake, it replaces the pointer of the next skb in the descriptor ring instead of the current one. As a result, the two descriptors are assigned the same SKB. The error is seen during the iperf test when skb_put tries to insert a second packet and exceeds the available buffer. Fixes: c7718ee9 ("net: lantiq: fix memory corruption in RX ring ") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Kristian Evensen authored
When the QMI_WWAN_FLAG_PASS_THROUGH is set, netif_rx() is called from qmi_wwan_rx_fixup(). When the call to netif_rx() is successful (which is most of the time), usbnet_skb_return() is called (from rx_process()). usbnet_skb_return() will then call netif_rx() a second time for the same skb. Simplify the code and avoid the redundant netif_rx() call by changing qmi_wwan_rx_fixup() to always return 1 when QMI_WWAN_FLAG_PASS_THROUGH is set. We then leave it up to the existing infrastructure to call netif_rx(). Suggested-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by:
-
Maciej Żenczykowski authored
This is meant to make the host side cdc_ncm interface consistently named just like the older CDC protocols: cdc_ether & cdc_ecm (and even rndis_host), which all use 'FLAG_ETHER | FLAG_POINTTOPOINT'. include/linux/usb/usbnet.h: #define FLAG_ETHER 0x0020 /* maybe use "eth%d" names */ #define FLAG_WLAN 0x0080 /* use "wlan%d" names */ #define FLAG_WWAN 0x0400 /* use "wwan%d" names */ #define FLAG_POINTTOPOINT 0x1000 /* possibly use "usb%d" names */ drivers/net/usb/usbnet.c @ line 1711: strcpy (net->name, "usb%d"); ... // heuristic: "usb%d" for links we know are two-host, // else "eth%d" when there's reasonable doubt. userspace // can rename the link if it knows better. if ((dev->driver_info->flags & FLAG_ETHER) != 0 && ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 || (net->dev_addr [0] & 0x02) == 0)) strcpy (net->name, "eth%d"); /* WLAN devices should always be named "wlan%d" */ if ((dev->driver_info->flags & FLAG_WLAN) != 0) strcpy(net->name, "wlan%d"); /* WWAN devices should always be named "wwan%d" */ if ((dev->driver_info->flags & FLAG_WWAN) != 0) strcpy(net->name, "wwan%d"); So by using ETHER | POINTTOPOINT the interface naming is either usb%d or eth%d based on the global uniqueness of the mac address of the device. Without this 2.5gbps ethernet dongles which all seem to use the cdc_ncm driver end up being called usb%d instead of eth%d even though they're definitely not two-host. (All 1gbps & 5gbps ethernet usb dongles I've tested don't hit this problem due to use of different drivers, primarily r8152 and aqc111) Fixes tag is based purely on git blame, and is really just here to make sure this hits LTS branches newer than v4.5. Cc: Lorenzo Colitti <lorenzo@google.com> Fixes: 4d06dd53 ("cdc_ncm: do not call usbnet_link_change from cdc_ncm_bind") Signed-off-by:Maciej Żenczykowski <maze@google.com> Signed-off-by:
-
Changbin Du authored
The function get_net_ns_by_fd() could be inlined when NET_NS is not enabled. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Scaled PPM conversion to PPB may (on 64bit systems) result in a value larger than s32 can hold (freq/scaled_ppm is a long). This means the kernel will not correctly reject unreasonably high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM). The conversion is equivalent to a division by ~66 (65.536), so the value of ppb is always smaller than ppm, but not small enough to assume narrowing the type from long -> s32 is okay. Note that reasonable user space (e.g. ptp4l) will not use such high values, anyway, 4289046510ppb ~= 4.3x, so the fix is somewhat pedantic. Fixes: d39a7435 ("ptp: validate the requested frequency adjustment.") Fixes: d94ba80e ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
- 14 Jun, 2021 16 commits
-
-
Subash Abhinov Kasiviswanathan authored
Update the function prototype of mhi_ndo_xmit to match ndo_start_xmit. This otherwise leads to run time failures when CFI is enabled in kernel. Fixes: 3ffec6a1 ("net: Add mhi-net driver") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
Daniel Borkmann authored
In almost all cases from test_verifier that have been changed in here, we've had an unreachable path with a load from a register which has an invalid address on purpose. This was basically to make sure that we never walk this path and to have the verifier complain if it would otherwise. Change it to match on the right error for unprivileged given we now test these paths under speculative execution. There's one case where we match on exact # of insns_processed. Due to the extra path, this will of course mismatch on unprivileged. Thus, restrict the test->insn_processed check to privileged-only. In one other case, we result in a 'pointer comparison prohibited' error. This is similarly due to verifying an 'invalid' branch where we end up with a value pointer on one side of the comparison. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
John Fastabend <john.fastabend@gmail.com> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
The verifier only enumerates valid control-flow paths and skips paths that are unreachable in the non-speculative domain. And so it can miss issues under speculative execution on mispredicted branches. For example, a type confusion has been demonstrated with the following crafted program: // r0 = pointer to a map array entry // r6 = pointer to readable stack slot // r9 = scalar controlled by attacker 1: r0 = *(u64 *)(r0) // cache miss 2: if r0 != 0x0 goto line 4 3: r6 = r9 4: if r0 != 0x1 goto line 6 5: r9 = *(u8 *)(r6) 6: // leak r9 Since line 3 runs iff r0 == 0 and line 5 runs iff r0 == 1, the verifier concludes that the pointer dereference on line 5 is safe. But: if the attacker trains both the branches to fall-through, such that the following is speculatively executed ... r6 = r9 r9 = *(u8 *)(r6) // leak r9 ... then the program will dereference an attacker-controlled value and could leak its content under speculative execution via side-channel. This requires to mistrain the branch predictor, which can be rather tricky, because the branches are mutually exclusive. However such training can be done at congruent addresses in user space using different branches that are not mutually exclusive. That is, by training branches in user space ... A: if r0 != 0x0 goto line C B: ... C: if r0 != 0x0 goto line D D: ... ... such that addresses A and C collide to the same CPU branch prediction entries in the PHT (pattern history table) as those of the BPF program's lines 2 and 4, respectively. A non-privileged attacker could simply brute force such collisions in the PHT until observing the attack succeeding. Alternative methods to mistrain the branch predictor are also possible that avoid brute forcing the collisions in the PHT. A reliable attack has been demonstrated, for example, using the following crafted program: // r0 = pointer to a [control] map array entry // r7 = *(u64 *)(r0 + 0), training/attack phase // r8 = *(u64 *)(r0 + 8), oob address // [...] // r0 = pointer to a [data] map array entry 1: if r7 == 0x3 goto line 3 2: r8 = r0 // crafted sequence of conditional jumps to separate the conditional // branch in line 193 from the current execution flow 3: if r0 != 0x0 goto line 5 4: if r0 == 0x0 goto exit 5: if r0 != 0x0 goto line 7 6: if r0 == 0x0 goto exit [...] 187: if r0 != 0x0 goto line 189 188: if r0 == 0x0 goto exit // load any slowly-loaded value (due to cache miss in phase 3) ... 189: r3 = *(u64 *)(r0 + 0x1200) // ... and turn it into known zero for verifier, while preserving slowly- // loaded dependency when executing: 190: r3 &= 1 191: r3 &= 2 // speculatively bypassed phase dependency 192: r7 += r3 193: if r7 == 0x3 goto exit 194: r4 = *(u8 *)(r8 + 0) // leak r4 As can be seen, in training phase (phase != 0x3), the condition in line 1 turns into false and therefore r8 with the oob address is overridden with the valid map value address, which in line 194 we can read out without issues. However, in attack phase, line 2 is skipped, and due to the cache miss in line 189 where the map value is (zeroed and later) added to the phase register, the condition in line 193 takes the fall-through path due to prior branch predictor training, where under speculation, it'll load the byte at oob address r8 (unknown scalar type at that point) which could then be leaked via side-channel. One way to mitigate these is to 'branch off' an unreachable path, meaning, the current verification path keeps following the is_branch_taken() path and we push the other branch to the verification stack. Given this is unreachable from the non-speculative domain, this branch's vstate is explicitly marked as speculative. This is needed for two reasons: i) if this path is solely seen from speculative execution, then we later on still want the dead code elimination to kick in in order to sanitize these instructions with jmp-1s, and ii) to ensure that paths walked in the non-speculative domain are not pruned from earlier walks of paths walked in the speculative domain. Additionally, for robustness, we mark the registers which have been part of the conditional as unknown in the speculative path given there should be no assumptions made on their content. The fix in here mitigates type confusion attacks described earlier due to i) all code paths in the BPF program being explored and ii) existing verifier logic already ensuring that given memory access instruction references one specific data structure. An alternative to this fix that has also been looked at in this scope was to mark aux->alu_state at the jump instruction with a BPF_JMP_TAKEN state as well as direction encoding (always-goto, always-fallthrough, unknown), such that mixing of different always-* directions themselves as well as mixing of always-* with unknown directions would cause a program rejection by the verifier, e.g. programs with constructs like 'if ([...]) { x = 0; } else { x = 1; }' with subsequent 'if (x == 1) { [...] }'. For unprivileged, this would result in only single direction always-* taken paths, and unknown taken paths being allowed, such that the former could be patched from a conditional jump to an unconditional jump (ja). Compared to this approach here, it would have two downsides: i) valid programs that otherwise are not performing any pointer arithmetic, etc, would potentially be rejected/broken, and ii) we are required to turn off path pruning for unprivileged, where both can be avoided in this work through pushing the invalid branch to the verification stack. The issue was originally discovered by Adam and Ofek, and later independently discovered and reported as a result of Benedict and Piotr's research work. Fixes: b2157399 ("bpf: prevent out-of-bounds speculation") Reported-by:Adam Morrison <mad@cs.tau.ac.il> Reported-by:
Ofek Kirzner <ofekkir@gmail.com> Reported-by:
Benedict Schlueter <benedict.schlueter@rub.de> Reported-by:
Piotr Krysiuk <piotras@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
... in such circumstances, we do not want to mark the instruction as seen given the goal is still to jmp-1 rewrite/sanitize dead code, if it is not reachable from the non-speculative path verification. We do however want to verify it for safety regardless. With the patch as-is all the insns that have been marked as seen before the patch will also be marked as seen after the patch (just with a potentially different non-zero count). An upcoming patch will also verify paths that are unreachable in the non-speculative domain, hence this extension is needed. Signed-off-by:
-
Daniel Borkmann authored
Instead of relying on current env->pass_cnt, use the seen count from the old aux data in adjust_insn_aux_data(), and expand it to the new range of patched instructions. This change is valid given we always expand 1:n with n>=1, so what applies to the old/original instruction needs to apply for the replacement as well. Not relying on env->pass_cnt is a prerequisite for a later change where we want to avoid marking an instruction seen when verified under speculative execution path. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix crash on SMP when debug is enabled ==================== Signed-off-by: -
Luiz Augusto von Dentz authored
When receiving a new connection pchan->conn won't be initialized so the code cannot use bt_dev_dbg as the pointer to hci_dev won't be accessible. Fixes: 2e1614f7 ("Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Pavel Skripkin authored
Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block. Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets") Reported-and-tested-by: syzbot+1917d778024161609247@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
David Ahern authored
Oliver reported a use case where deleting a VRF device can hang waiting for the refcnt to drop to 0. The root cause is that the dst is allocated against the VRF device but cached on the loopback device. The use case (added to the selftests) has an implicit VRF crossing due to the ordering of the FIB rules (lookup local is before the l3mdev rule, but the problem occurs even if the FIB rules are re-ordered with local after l3mdev because the VRF table does not have a default route to terminate the lookup). The end result is is that the FIB lookup returns the loopback device as the nexthop, but the ingress device is in a VRF. The mismatch causes the dst alloc against the VRF device but then cached on the loopback. The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu): pick the dst alloc device based the fib lookup result but with checks that the result has a nexthop device (e.g., not an unreachable or prohibit entry). Fixes: f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Reported-by:
Oliver Herms <oliver.peter.herms@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported memory leak in tty_init_dev(). The problem was in unputted tty in ldisc_open() static int ldisc_open(struct tty_struct *tty) { ... ser->tty = tty_kref_get(tty); ... result = register_netdevice(dev); if (result) { rtnl_unlock(); free_netdev(dev); return -ENODEV; } ... } Ser pointer is netdev private_data, so after free_netdev() this pointer goes away with unputted tty reference. So, fix it by adding tty_kref_put() before freeing netdev. Reported-and-tested-by: syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com Signed-off-by: -
Rahul Lakkireddy authored
The TID returned during successful filter creation is relative to the region in which the filter is created. Using it directly always returns Hi Prio/Normal filter region's entry for the first couple of entries, even though the rule is actually inserted in Hash region. Fix by analyzing in which region the filter has been inserted and save the absolute TID to be used for lookup later. Fixes: db43b30c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: e87ad553 ("netxen: support pci error handlers") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 451724c8 ("qlcnic: aer support") Signed-off-by:
-
Jakub Kicinski authored
Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :) Reported-by: syzbot+59aa77b92d06cd5a54f2@syzkaller.appspotmail.com Fixes: 71921690 ("ethtool: provide string sets with STRSET_GET request") Signed-off-by: -
Alex Elder authored
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure statistics on a given CPU are collected atomically. If one of the statistics values gets updated within the begin/retry window, the loop will run again. Currently the statistics totals are updated inside that window. This means that if the loop ever retries, the statistics for the CPU will be counted more than once. Fix this by taking a snapshot of a CPU's statistics inside the protected window, and then updating the counters with the snapshot values after exiting the loop. (Also add a newline at the end of this file...) Fixes: 192c4b5d ("net: qualcomm: rmnet: Add support for 64 bit stats") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Tyson Moore authored
Commit b8392808 ("sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling") added the LE mark to the Bulk tin. Update the comments to reflect the change. Signed-off-by:
Tyson Moore <tyson@tyson.me> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
- 12 Jun, 2021 1 commit
-
-
Changbin Du authored
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2 #16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
- 11 Jun, 2021 7 commits
-
-
Jisheng Zhang authored
The register starts from 0x800 is the 16th MAC address register rather than the first one. Fixes: cffb13f4 ("stmmac: extend mac addr reg and fix perfect filering") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: bug fixes for ethtool flash ops This series of patches add bug fixes in ethtool flash operations. Patch 1 fixes an endianness issue when writing boot image to flash after the device ID has been updated. Patch 2 fixes sleep in atomic when writing PHY firmware to flash. Patch 3 fixes issue with PHY firmware image not getting written to flash when chip is still running. -==================== Signed-off-by: -
Rahul Lakkireddy authored
When using firmware-assisted PHY firmware image write to flash, halt the chip before beginning the flash write operation to allow the running firmware to store the image persistently. Otherwise, the running firmware will only store the PHY image in local on-chip RAM, which will be lost after next reset. Fixes: 4ee339e1 ("cxgb4: add support to flash PHY image") Signed-off-by:
-
Rahul Lakkireddy authored
Before writing new PHY firmware to on-chip memory, driver queries firmware for current running PHY firmware version, which can result in sleep waiting for reply. So, move spinlock closer to the actual on-chip memory write operation, instead of taking it at the callers. Fixes: 5fff701c ("cxgb4: always sync access when flashing PHY firmware") Signed-off-by:
-
Rahul Lakkireddy authored
Boot images are copied to memory and updated with current underlying device ID before flashing them to adapter. Ensure the updated images are always flashed in Big Endian to allow the firmware to read the new images during boot properly. Fixes: 55088355 ("cxgb4: add support to flash boot image") Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: ab69bde6 ("alx: add a simple AR816x/AR817x device driver") Signed-off-by:
-
Praneeth Bajjuri authored
Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by:
Praneeth Bajjuri <praneeth@ti.com> Signed-off-by:
Geet Modi <geet.modi@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 10 Jun, 2021 4 commits
-
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: More v5.13 fixes Here's another batch of MPTCP fixes for v5.13. Patch 1 cleans up memory accounting between the MPTCP-level socket and the subflows to more reliably transfer forward allocated memory under pressure. Patch 2 wakes up socket readers more reliably. Patch 3 changes a WARN_ONCE to a pr_debug. Patch 4 changes the selftests to only use syncookies in test cases where they do not cause spurious failures. Patch 5 modifies socket error reporting to avoid a possible soft lockup. ==================== Signed-off-by: -
Paolo Abeni authored
Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. Reported-by:
Maxim Galaganov <max@internet.ru> Fixes: 15cc1045 ("mptcp: deliver ssk errors to msk") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
Syncookie validation may fail for OoO packets, causing spurious resets and self-tests failures, so let's force syncookie only for tests iteration with no OoO. Fixes: fed61c4b ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198Signed-off-by:
-
Paolo Abeni authored
warn_bad_map() produces a kernel WARN on bad input coming from the network. Use pr_debug() to avoid spamming the system log. Additionally, when the right bound check fails, warn_bad_map() reports the wrong ssn value, let's fix it. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107Signed-off-by:
-
