- 08 Apr, 2017 22 commits
-
-
Pushkar Jambhlekar authored
Adding a blank line after declaration Signed-off-by:
Pushkar Jambhlekar <pushkar.iit@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian Gromm authored
Inside the function store_value() the table of writable registers need to be passed to function get_static_reg_addr() or else the correct register address is never going to be found. Reported-by:
Alex Riesen <alexander.riesen@cetitec.com> Signed-off-by:
Christian Gromm <christian.gromm@microchip.com> Signed-off-by:
-
Andrey Shvetsov authored
Despite the user payload may not be bigger than (2**16 - 1) bytes, the final packet size may be bigger because of the gap space needed for the controller. This patch removes the temporary variables of the type u16 that are used to hold the offsets that may be bigger than 2**16 bytes. Signed-off-by:
Andrey Shvetsov <andrey.shvetsov@k2l.de> Signed-off-by:
-
Andrey Shvetsov authored
The final size of the buffer used for the streaming transfer consists of the size for the user payload (buffer_size) and the size for the gaps needed by the controller (extra_len). The current implementation of the hdm_configure_channel() corrects the buffer size down to the next appropriate for the hardware value, that is the whole number of frames, but uses the old unaligned value to calculate the extra_len. Current patch fixes the described problem. Signed-off-by:
-
Andrey Shvetsov authored
When a channel is being removed while an application holds the corresponding character device, this device is going to be destroyed only after the application closes the file descriptor and releases character device. In case the channel appears again before the application closes the file descriptor it holds, the channel cannot be linked. This patch changes the described behavior and destroys the character device at the time the channel get disconnected from the AIM. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces three temporary variables representing the attributes to control the links between the AIMs and HDMs with an array of three elements to keep the corresponding code compact. Signed-off-by:
-
Andrey Shvetsov authored
Currently an AIM has the following properties available to manage links: - write-only "remove_link" used to remove a link from a list - read/write "add_link" used to add a link to a list and display them This patch transfers the read functionality of "add_link" to the new read-only property "links" to build consistent set of properties to control the list of links. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces 13 temporary variables representing the attributes to control the channel with an array of 13 elements to keep the corresponding code compact. Signed-off-by:
-
Christian Gromm authored
This patch replaces the proprietary macros with those provided by the kernel. Signed-off-by:
-
Christian Gromm authored
This patch fixes the names of the show/store functions to match the naming convention. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces the name store_remove_link by the remove_link_store in the comment for the corresponding function. Signed-off-by:
-
Andrey Shvetsov authored
This patch replaces the name store_add_link by the add_link_store in the comment for the corresponding function. Signed-off-by:
-
Laura Abbott authored
Device specific platform support has been haphazard for Ion. There have been several independent attempts and there are still objections to what bindings exist right now. Just remove everything for a fresh start. Signed-off-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
-
Laura Abbott authored
ION_IOC_MAP is the same as ION_IOC_SHARE. We really don't need two identical interfaces. Remove it. Signed-off-by:
-
Laura Abbott authored
With the expansion of dma-buf and the move for Ion to be come just an allocator, the import mechanism is mostly useless. There isn't a kernel component to Ion anymore and handles are private to Ion. Remove this interface. Signed-off-by:
-
Laura Abbott authored
Ion is now moving towards a unified interfact. This makes the custom ioctl interface unneeded. Remove it. Signed-off-by:
-
Laura Abbott authored
Now that we call dma_map in the dma_buf API callbacks there is no need to use the existing cache APIs. Remove the sync ioctl and the existing bad dma_sync calls. Explicit caching can be handled with the dma_buf sync API. Signed-off-by:
-
Laura Abbott authored
The new method of syncing with dma_map means that the page faulting sync implementation is no longer applicable. Remove it. Signed-off-by:
-
Laura Abbott authored
Technically, calling dma_buf_map_attachment should return a buffer properly dma_mapped. Add calls to dma_map_sg to begin_cpu_access to ensure this happens. As a side effect, this lets Ion buffers take advantage of the dma_buf sync ioctls. Signed-off-by:
-
Laura Abbott authored
Ion currently returns a single sg_table on each dma_map call. This is incorrect for later usage. Signed-off-by:
-
Laura Abbott authored
The align field was supposed to be used to specify the alignment of the allocation. Nobody actually does anything with it except to check if the alignment specified is out of bounds. Since this has no effect on the actual allocation, just remove it. Signed-off-by:
-
Laura Abbott authored
The reference counting of dma_map calls was removed. Remove the associated counter field as well. Signed-off-by:
-
- 03 Apr, 2017 1 commit
-
-
Greg Kroah-Hartman authored
Merge tag 'iio-for-4.12c' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next Third set of new device support, cleanups and features for IIO in the 4.12 cycle Somewhat dominated in patch numbers of last of the outreachy application window related patches (they are still coming, despite window being closed which is good to see!) Good set of new drivers as well. New device support * ASPEED ADC - new driver * cpcap PMIC ADC - new driver * hid-humidity - driver for HID compatible humidity sensors. * ltc2497 ADC - new driver * mpu6050 - bring bindings up to date and add trivial support for 9250 * rockchip-saradc - update bindings to cover rk3328 * vl6180 light, proximity and time of flight sensor. - new driver Features * meson-saradc - add calibration Cleanup and minor fixes * ad5504 - constify attribute_group structure - drop casting of void * * ad7150 - replace some shifts of 1 by BIT macro usage * ad7152 - blank lines between function definitions * ad7280a - octal permissions. * ad7606 - replace use of core mlock mutex with a local lock * ad7746 - replace some shifts of 1 by BIT macro usage - function parameter alignment - drop some excessive brackets (introduced in last pull request) * ad7753 - white space cleanup * ad7754 - includes in alphabetical order and groupped appropriately. - change from missuse of internal mlock mutex to using the buffer lock to also protect values during frequency update. * ad779x - constify attribute_group structures * ad9832 - octal permissions * adis16060 - remove use of core mlock mutex in favour of adding a local _spi_write_then_read which can use the local buffer protection lock. - fix naming of above function. * adis16203 - remove locking during reads of calibbias that doesn't protect anything not protected elsewhere. * adis16209 - remove unnecessary braces in single statement if * adis16240 - remove unnecessary braces in single statement if * adt7136 - drop excess blank lines and put some in between functions. * ams-iaq - replace comma with semi colon. Not actual bug, just unusual syntax. * apds9960 - constify attribute group structure * as3935 - constify attribute group structure * bm1750 - constify attribute group structure * cros_ec - devm version of triggered buffer setup to simplify code. * exynos - drop casting of void * * hdc100x - constify attribute_group structure * hid-accel - fix wrong scale for newly introduced gravity sensor. * hts221 - drop casting of void * * hx711 - constify attribute_group structure * imx7d_adc - drop casting of void * * lm35333 - constify attribute_group structure * lsm6dsx - drop casting of void * - hold ODR configuration until enabling to avoid a race condition. * max1027 - drop casting of void * * max11100 - fix a comma where semicolon was intended (no actual bug, just odd) * max1363 - constify attribute_group structure * ms sensors - drop casting of void * * rockchip_saradc - drop casting of void * * sun4i-gpadc - fix missing dependency on THERMAL or presence of stubs (issue only introduced in pervious set) - drop casting of void * * tsl2x7x - fix wrong standard deviation calc. Note these aren't actually used for anything at the moment so bug didn't really matter. - constify attribute group structure. * vf610adc - drop casting of void * * vz89x - replace comma with semicolon. Not actual bug, just odd syntax. * zpa2326 - drop casting of void *
-
- 02 Apr, 2017 15 commits
-
-
Lorenzo Bianconi authored
This patch allows to avoid a transitory that occurs when a given sensor has been already enabled (e.g. gyroscope) and the user is configuring the sample frequency of the other one (e.g. accelerometer). The transitory lasts until the accelerometer is enabled. During that time slice the gyroscope ODR is incorrectly modified as well. At the end of the transitory both sensors work at the right frequency. Fix it introducing st_lsm6dsx_check_odr() routine to check ODR consistency in write_raw handler in order to apply frequency configuration just in st_lsm6dsx_set_odr() Fixes: 290a6ce1 (iio: imu: add support to lsm6dsx driver) Signed-off-by:
Lorenzo Bianconi <lorenzo.bianconi@st.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Arnd Bergmann authored
With CONFIG_THERMAL=m and CONFIG_SUN4I_GPADC=y, we get a link error from calling devm_thermal_zone_of_sensor_register: drivers/iio/built-in.o: In function `sun4i_gpadc_probe': :(.text+0x1c284): undefined reference to `devm_thermal_zone_of_sensor_register' This adds a Kconfig dependency to ensure we can only have the ADC driver as built-in when this function is also built-in, or when we see the empty stub implementation. When the thermal code is a module, we can still build the adc driver as a module, too. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Fixes: d1caa990 ("iio: adc: add support for Allwinner SoCs ADC") Signed-off-by:
-
Michael Hennerich authored
This patch adds support for the Analog Devices / Linear Technology LTC2497 ADCs. The LTC2497 is a 16-channel (eight differential), 16-bit, high precision, delta-sigma ADC with an automatic, differential, input current cancellation front end and a 2-wire, I2C interface. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Guru Das Srinagesh authored
This fixes the coding style issue of using S_IWUSR in place of 4-digit octal numbers. Issue detected by checkpatch. Signed-off-by:
Guru Das Srinagesh <gurooodas@gmail.com> Signed-off-by:
-
Jonathan Cameron authored
The mpu9250 is a SIP containing an mpu6500 and an ak8975. If this was all there was too it there would be no need for explicit handling in the driver. Arguably the bindings would also only reflect the presence of an mpu6500 with the ak8975 hanging off it, as the kernel doesn't care that they are in one package. However, the WHOAMI value changes as well so best to add explicit support. Signed-off-by: -
Jonathan Cameron authored
These bindings are somewhat lagging the state of the driver. The i2c-gate bindings are documented elsewhere, but it seems sensible to at least have an example and cross reference in here. SPI bindings will need to be the subject of a future patch. Signed-off-by:
Rob Herring <robh@kernel.org>
-
Liang Chen authored
The rk3328 saradc is the same as rk3399. Signed-off-by:
Liang Chen <cl@rock-chips.com> Reviewed-by:
Heiko Stuebner <heiko@sntech.de> Acked-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
simran singhal <singhalsimran0@gmail.com> Signed-off-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
-
simran singhal authored
The following Coccinelle script was used to detect this: @r@ expression x; void* e; type T; identifier f; @@ ( *((T *)e) | ((T *)x)[...] | ((T*)x)->f | - (T*) e ) Signed-off-by:
-
simran singhal authored
Change the name of function from adis16060_spi_write_than_read() to adis16060_spi_write_then_read(). change "than" to "then" as its time depended. Signed-off-by:
-
simran singhal authored
Check for attribute_group structures that are only stored in the event_attrs filed of iio_info structure. As the event_attrs field of iio_info structures is constant, so these attribute_group structures can also be declared constant. Done using coccinelle: @r1 disable optional_qualifier @ identifier i; position p; @@ static struct attribute_group i@p = {...}; @ok1@ identifier r1.i; position p; struct iio_info x; @@ x.event_attrs=&i@p; @bad@ position p!={r1.p,ok1.p}; identifier r1.i; @@ i@p @depends on !bad disable optional_qualifier@ identifier r1.i; @@ static +const struct attribute_group i={...}; @depends on !bad disable optional_qualifier@ identifier r1.i; @@ +const struct attribute_group i; As the attrs field of iio_info structures is also constant, so these attribute_group structures can also be declared constant. Done manually. File size before: text data bss dec hex filename 5798 2376 0 8174 1fee drivers/iio/light/lm3533-als.o File size after: text data bss dec hex filename 5926 2248 0 8174 1fee drivers/iio/light/lm3533-als.o Signed-off-by:
-
- 01 Apr, 2017 2 commits
-
-
Rick Altherr authored
Aspeed BMC SoCs include a 16 channel, 10-bit ADC. Low and high threshold interrupts are supported by the hardware but are not currently implemented. Signed-off-by:
Rick Altherr <raltherr@google.com> Tested-by:
Xo Wang <xow@google.com> Reviewed-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Rick Altherr authored
Signed-off-by:
-
