- 21 Jul, 2020 40 commits
-
-
Ryder Lee authored
In MT7915, hardware queue map is flexible. However, certain firmware modules like MU and U-APSD presume a fixed queue order to adapt some devices that have DMA scheduler with a strict order, so this patch can help in the long run. Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name>
-
Ryder Lee authored
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by:
-
Lorenzo Bianconi authored
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
-
Lorenzo Bianconi authored
For consistency with the rest of the code always rely on defined macros for register access Signed-off-by:
-
Markus Theil authored
kernel test robot <lkp@intel.com> found the following issue and Kalle Valo forwarded it to Linux wireless. drivers/net/wireless/mediatek/mt76/pci.c:8:6: warning: no previous prototype for 'mt76_pci_disable_aspm' Fix this by adding the missing include of mt76.h as Kalle suggested. Signed-off-by:
Markus Theil <markus.theil@tu-ilmenau.de> Signed-off-by:
-
Markus Theil authored
While looking at the ETSI regulatory domain definitions and a patch, which allows more channels for ath10k, I also checked the channels allowed for mt76. ETSI regulations would possibly allow to add channels 32, 68, 96, 144, 169 and 173. IEEE 802.11-2016 defines no operating class for channels 32, 68 and 96. This leaves us channels 144, 169 and 173, which are included in this patch. I tested 169 and 173 with a mt76 based USB dongle (AVM AC 860) and they worked fine. If I saw that right, these channels are also covered by register definitions inside the driver. Channel 144 should also work, but gets disabled by the kernel as of now. Signed-off-by:
-
Sean Wang authored
Fix up typo in Kconfig with indicating MT7663U is an 802.11ac device Fixes: eb99cc95 ("mt76: mt7615: introduce mt7663u support") Signed-off-by:
Sean Wang <sean.wang@mediatek.com> Signed-off-by:
-
Sean Wang authored
Introduce ARP filter offload Co-developed-by:
Wan-Feng Jiang <Wan-Feng.Jiang@mediatek.com> Signed-off-by:
Soul Huang <Soul.Huang@mediatek.com> Signed-off-by:
-
Lorenzo Bianconi authored
Rely on mt76_for_each_q_rx whenever possible in order to simply the code Signed-off-by:
-
Felix Fietkau authored
Preparation for supporting more offload features Signed-off-by: -
Lorenzo Bianconi authored
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874 ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3 ("mt76: mt7615: introduce mt7663e support") Suggested-by:
-
Lorenzo Bianconi authored
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874 ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3 ("mt76: mt7615: introduce mt7663e support") Co-developed-by:
-
Lorenzo Bianconi authored
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by:
-
Lorenzo Bianconi authored
Coverage class callback can potentially run in parallel with other routines (e.g. mt7615_set_channel) that configures timing registers. Run coverage class callback holding mt76 mutex Signed-off-by:
-
Vladimir Oltean authored
Now that DSA supports MTU configuration, undo the effects of commit 8b1efc0f ("net: remove MTU limits on a few ether_setup callers") and let DSA interfaces use the default min_mtu and max_mtu specified by ether_setup(). This is more important for min_mtu: since DSA is Ethernet, the minimum MTU is the same as of any other Ethernet interface, and definitely not zero. For the max_mtu, we have a callback through which drivers can override that, if they want to. Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jonathan McDowell authored
This switch has a single max frame size configuration register, so we track the requested MTU for each port and apply the largest. v2: - Address review feedback from Vladimir Oltean Signed-off-by:
Jonathan McDowell <noodles@earth.li> Acked-by:
-
Wang Hai authored
Because kfree_skb already checked NULL skb parameter, so the additional checks are unnecessary, just remove them. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wang Hai <wanghai38@huawei.com> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated, GFP_KERNEL can be used because it is called from the probe function (i.e. 'fealnx_init_one()') and no lock is taken. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below and has been hand modified to replace GFP_ with a correct flag. It has been compile tested. When memory is allocated in 'setup_hw()' (hfcpci.c) GFP_KERNEL can be used because it is called from the probe function and no lock is taken. The call chain is: hfc_probe() --> setup_card() --> setup_hw() When memory is allocated in 'inittiger()' (netjet.c) GFP_ATOMIC must be used because a spin_lock is taken by the caller (i.e. 'nj_init_card()') This is also consistent with the other allocations done in the function. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by:
-
Briana Oursler authored
Add tdc to existing kselftest infrastructure so that it can be run with existing kselftests. TDC now generates objects in objdir/kselftest without cluttering main objdir, leaves source directory clean, and installs correctly in kselftest_install, properly adding itself to run_kselftest.sh script. Add tc-testing as a target of selftests/Makefile. Create tdc.sh to run tdc.py targets with correct arguments. To support single target from selftest/Makefile, combine tc-testing/bpf/Makefile and tc-testing/Makefile. Move action.c up a directory to tc-testing/. Tested with: make O=/tmp/{objdir} TARGETS="tc-testing" kselftest cd /tmp/{objdir} cd kselftest cd tc-testing ./tdc.sh make -C tools/testing/selftests/ TARGETS=tc-testing run_tests make TARGETS="tc-testing" kselftest cd tools/testing/selftests ./kselftest_install.sh /tmp/exampledir My VM doesn't run all the kselftests so I commented out all except my target and net/pmtu.sh then: cd /tmp/exampledir && ./run_kselftest.sh Co-developed-by:Davide Caratti <dcaratti@redhat.com> Signed-off-by:
Briana Oursler <briana.oursler@gmail.com> Signed-off-by:
-
Vinay Kumar Yadav authored
Enable tcp window scaling option in hw based on sysctl settings and option in connection request. v1->v2: - Set window scale option based on option in connection request. Signed-off-by:
Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by:
-
David S. Miller authored
Mark Starovoytov says: ==================== net: atlantic: various features This patchset adds more features for Atlantic NICs: * media detect; * additional per-queue stats; * PTP stats; * ipv6 support for TCP LSO and UDP GSO; * 64-bit operations; * A0 ntuple filters; * MAC temperature (hwmon). This work is a joint effort of Marvell developers. v3: * reworked patches related to stats: . fixed u64_stats_update_* usage; . use simple assignment in _get_stats / _fill_stats_data; . made _get_sw_stats / _fill_stats_data return count as return value; . split rx and tx per-queue stats; v2: https://patchwork.ozlabs.org/cover/1329652/ * removed media detect feature (will be reworked and submitted later); * removed irq counter from stats; * use u64_stats_update_* to protect 64-bit stats; * use io-64-nonatomic-lo-hi.h for readq/writeq fallbacks; v1: https://patchwork.ozlabs.org/cover/1327894/ ==================== Signed-off-by:
-
Mark Starovoytov authored
This patch adds the possibility to obtain MAC temperature via hwmon. On A1 there are two separate temperature sensors. On A2 there's only one temperature sensor, which is used for reporting both MAC and PHY temperature. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds support for ntuple filters on A0. Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
-
Nikita Danilov authored
This patch syncs up hw_atl_a0.c with an out-of-tree driver, where an intermediate variable was introduced in a couple of functions to improve the code readability a bit. Signed-off-by:
Nikita Danilov <ndanilov@marvell.com> Signed-off-by:
-
Mark Starovoytov authored
This patch replaces magic constant ~0U usage with U32_MAX in aq_hw_utils.c Signed-off-by:
-
Pavel Belous authored
This patch adds support for 64-bit reads/writes where applicable, e.g. A2 supports them. Signed-off-by:
Pavel Belous <pbelous@marvell.com> Signed-off-by:
-
Igor Russkikh authored
This patch enables ipv6 support for TCP LSO and UDP GSO. The code itself (aq_nic_map_skb) was ready for this after udp gso feature, but corresponding NETIF_F_TSO6 wasn't enabled. We now have tested both tcp and udp v6 GSO, and enabling them safely. Signed-off-by:
-
Pavel Belous authored
This patch adds PTP rings statistics. Before that these were missing from overall stats, hardening debugging and analysis. Signed-off-by:
-
Dmitry Bogdanov authored
This patch adds additional per-queue stats, these could be useful for debugging and diagnostics. Signed-off-by:
-
Mark Starovoytov authored
This patch adds u64_stats_update_* usage to protect access to 64-bit stats, where necessary. This is necessary for per-ring stats, because they are updated by the driver directly, so there is a possibility for a partial read. Other stats require no additional protection, e.g.: * all MACSec stats are fetched directly from HW (under semaphore); * nic/ndev stats (aq_stats_s) are fetched directly from FW (under mutex). Signed-off-by:
-
Mark Starovoytov authored
This patch splits rx and tx per-queue stats. This change simplifies the follow-up introduction of PTP stats and u64_stats_update_* usage. Signed-off-by:
-
Mark Starovoytov authored
This patch changes aq_vec_get_sw_stats() to return count as a return value (which was unused) instead of an out parameter. Signed-off-by:
-
Mark Starovoytov authored
This patch replaces addition assignment operator with a simple assignment in aq_vec_get_stats() and aq_vec_get_sw_stats(), because it is sufficient in both cases and this change simplifies the introduction of u64_stats_update_* in these functions. Signed-off-by:
-
Mark Starovoytov authored
This patch moves FRAC_PER_NS to aq_hw.h so that it can be used in both hw_atl (A1) and hw_atl2 (A2) in the future. Signed-off-by:
-
David S. Miller authored
Vladimir Oltean says: ==================== Extend testptp with PTP perout waveform Demonstrate the usage of the newly introduced flags in the PTP_PEROUT_REQUEST2 ioctl: https://www.spinics.net/lists/netdev/msg669346.html ==================== Signed-off-by:
-
Vladimir Oltean authored
Extend the example program for PTP ancillary functionality with the ability to configure not only the periodic output's period (frequency), but also the phase and duty cycle (pulse width) which were newly introduced. The ioctl level also needs to be updated to the new PTP_PEROUT_REQUEST2, since the original PTP_PEROUT_REQUEST doesn't support this functionality. For an in-tree testing program, not having explicit backwards compatibility is fine, as it should always be tested with the current kernel headers and sources. Tested with an oscilloscope on the felix switch PHC: echo '2 0' > /sys/class/ptp/ptp1/pins/switch_1588_dat0 ./testptp -d /dev/ptp1 -p 1000000000 -w 100000000 -H 1000 -i 0 Signed-off-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Since 'perout' holds the nanosecond value of the signal's period, it should be a 64-bit value. Current assumption is that it cannot be larger than 1 second. Signed-off-by:
-
Vaibhav Gupta authored
Drivers using legacy PM have to manage PCI states and device's PM states themselves. They also need to take care of configuration registers. With improved and powerful support of generic PM, PCI Core takes care of above mentioned, device-independent, jobs. This driver makes use of PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state() and pci_set_master() to do required operations. In generic mode, they are no longer needed. Change function parameter in both .suspend() and .resume() to "struct device*" type. Use to_pci_dev() and dev_get_drvdata() to get "struct pci_dev*" variable and drv data. Compile-tested only. Signed-off-by:
Vaibhav Gupta <vaibhavgupta40@gmail.com> Signed-off-by:
-
David S. Miller authored
Alexander Lobakin says: ==================== qed, qede: add support for new operating modes This series covers the support for the following: - new port modes; - loopback modes, previously missing; - new speed/link modes; - several FEC modes; - multi-rate transceivers; and also cleans up and optimizes several related parts of code. v3 (from [2]): - dropped custom link mode declaration; qed, qede and qedf switched to Ethtool link modes and definitions (#0001, #0002, per Andrew Lunn's suggestion); - exchange more .text size to .initconst and .ro_after_init in qede (#0003). v2 (from [1]): - added a patch (#0010) that drops discussed dead struct member; - addressed checkpatch complaints on #0014 (former #0013); - rebased on top of latest net-next; - no other changes. [1] https://lore.kernel.org/netdev/20200716115446.994-1-alobakin@marvell.com/ [2] https://lore.kernel.org/netdev/20200719201453.3648-1-alobakin@marvell.com/ ==================== Signed-off-by:
-
