- 30 Mar, 2023 3 commits
-
-
Ryder Lee authored
Here should return the size of ieee80211_eht_cap_elem_fixed, so fix it. Fixes: 820acc81 ("mac80211: Add EHT capabilities to association/probe request") Signed-off-by:
Ryder Lee <ryder.lee@mediatek.com> Link: https://lore.kernel.org/r/06c13635fc03bcff58a647b8e03e9f01a74294bd.1679935259.git.ryder.lee@mediatek.comSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Felix Fietkau authored
rx->sta->amsdu_mesh_control is being passed to ieee80211_amsdu_to_8023s without checking rx->sta. Since it doesn't make sense to accept A-MSDU packets without a sta, simply add a check earlier. Fixes: 6e4c0d04 ("wifi: mac80211: add a workaround for receiving non-standard mesh A-MSDU") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20230330090001.60750-2-nbd@nbd.nameSigned-off-by:
-
Felix Fietkau authored
These were unintentional copy&paste mistakes. Cc: stable@vger.kernel.org Fixes: 986e43b1 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by:
-
- 22 Mar, 2023 4 commits
-
-
Felix Fietkau authored
If a packet has reached its intended destination, it was bumped to the code that accepts it, without first checking if a mesh_path needs to be created based on the discovered source. Fix this by moving the destination address check further down. Cc: stable@vger.kernel.org Fixes: 986e43b1 ("wifi: mac80211: fix receiving A-MSDU frames on mesh interfaces") Signed-off-by:
-
Felix Fietkau authored
When ieee80211_select_queue is called for mesh, the sta pointer is usually NULL, since the nexthop is looked up much later in the tx path. Explicitly check for unicast address in that case in order to make qos work again. Cc: stable@vger.kernel.org Fixes: 50e2ab39 ("wifi: mac80211: fix queue selection for mesh/OCB interfaces") Signed-off-by:
-
Johannes Berg authored
Some recent upstream debugging uncovered the fact that in iwlwifi, the TXQ list manipulation is racy. Introduce a new state bit for when the TXQ is completely ready and can be used without locking, and if that's not set yet acquire the lock to check everything correctly. Reviewed-by:
Benjamin Berg <benjamin.berg@intel.com> Tested-by:
Jose Ignacio Tornos Martinez <jtornosm@redhat.com> Signed-off-by:
-
Johannes Berg authored
This could race if the queue is redirected while full, then the flushing internally would start it while it's not yet usable again. Fix it by using two state bits instead of just one. Reviewed-by:
-
- 15 Mar, 2023 2 commits
-
-
Alexander Wetzel authored
ieee80211_handle_wake_tx_queue must not run concurrent multiple times. It calls ieee80211_txq_schedule_start() and the drivers migrated to iTXQ do not expect overlapping drv_tx() calls. This fixes 'c850e31f ("wifi: mac80211: add internal handler for wake_tx_queue")', which introduced ieee80211_handle_wake_tx_queue. Drivers started to use it with 'a790cc3a ("wifi: mac80211: add wake_tx_queue callback to drivers")'. But only after fixing an independent bug with '4444bc21 ("wifi: mac80211: Proper mark iTXQs for resumption")' problematic concurrent calls really happened and exposed the initial issue. Fixes: c850e31f ("wifi: mac80211: add internal handler for wake_tx_queue") Reported-by:
Thomas Mann <rauchwolke@gmx.net> Link: https://bugzilla.kernel.org/show_bug.cgi?id=217119 Link: https://lore.kernel.org/r/b8efebc6-4399-d0b8-b2a0-66843314616b@leemhuis.info/ Link: https://lore.kernel.org/r/b7445607128a6b9ed7c17fcdcf3679bfaf4aaea.camel@sipsolutions.net> CC: <stable@vger.kernel.org> Signed-off-by:
Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20230314211122.111688-1-alexander@wetzel-home.de [add missing spin_lock_init() noticed by Felix] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can be compile tested with !CONFIG_OF making certain data unused: drivers/net/wireless/marvell/mwifiex/sdio.c:498:34: error: ‘mwifiex_sdio_of_match_table’ defined but not used [-Werror=unused-const-variable=] drivers/net/wireless/marvell/mwifiex/pcie.c:175:34: error: ‘mwifiex_pcie_of_match_table’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20230312132523.352182-1-krzysztof.kozlowski@linaro.org
-
- 13 Mar, 2023 3 commits
-
-
Lorenzo Bianconi authored
WED is supported just for mmio devices, so do not check it for usb or sdio devices. This patch fixes the crash reported below: [ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d [ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3) [ 22.565885] wlp0s3u1i3: authenticated [ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3) [ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3) [ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms) [ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3) [ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3) [ 23.797450] wlp0s3u1i3: associated [ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0) [ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200 [ 24.959706] #PF: supervisor instruction fetch in kernel mode [ 24.959788] #PF: error_code(0x0011) - permissions violation [ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163 [ 24.959957] Oops: 0011 [#1] PREEMPT SMP [ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18 [ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 [ 24.960191] RIP: 0010:0xffff88800c223200 [ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.961190] Call Trace: [ 24.961219] <TASK> [ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310 [ 24.961313] ? mt7921_set_key+0x150/0x200 [ 24.961365] ? drv_set_key+0xa9/0x1b0 [ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240 [ 24.961485] ? ieee80211_key_replace+0x3f3/0x730 [ 24.961541] ? crypto_shash_setkey+0x89/0xd0 [ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0 [ 24.961664] ? crypto_aead_setauthsize+0x31/0x50 [ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0 [ 24.961785] ? ieee80211_add_key+0x1fc/0x250 [ 24.961842] ? rdev_add_key+0x41/0x140 [ 24.961882] ? nl80211_parse_key+0x6c/0x2f0 [ 24.961940] ? nl80211_new_key+0x24a/0x290 [ 24.961984] ? genl_rcv_msg+0x36c/0x3a0 [ 24.962036] ? rdev_mod_link_station+0xe0/0xe0 [ 24.962102] ? nl80211_set_key+0x410/0x410 [ 24.962143] ? nl80211_pre_doit+0x200/0x200 [ 24.962187] ? genl_bind+0xc0/0xc0 [ 24.962217] ? netlink_rcv_skb+0xaa/0xd0 [ 24.962259] ? genl_rcv+0x24/0x40 [ 24.962300] ? netlink_unicast+0x224/0x2f0 [ 24.962345] ? netlink_sendmsg+0x30b/0x3d0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962388] ? ____sys_sendmsg+0x109/0x1b0 [ 24.962440] ? __import_iovec+0x2e/0x110 [ 24.962482] ? ___sys_sendmsg+0xbe/0xe0 [ 24.962525] ? mod_objcg_state+0x25c/0x330 [ 24.962576] ? __dentry_kill+0x19e/0x1d0 [ 24.962618] ? call_rcu+0x18f/0x270 [ 24.962660] ? __dentry_kill+0x19e/0x1d0 [ 24.962702] ? __x64_sys_sendmsg+0x70/0x90 [ 24.962744] ? do_syscall_64+0x3d/0x80 [ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70 [ 24.962852] ? entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 24.962913] </TASK> [ 24.962939] Modules linked in: [ 24.962981] CR2: ffff88800c223200 [ 24.963022] ---[ end trace 0000000000000000 ]--- [ 24.963087] RIP: 0010:0xffff88800c223200 [ 24.963323] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282 [ 24.963376] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058 [ 24.963458] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010 [ 24.963538] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c [ 24.963622] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001 [ 24.963705] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644 [ 24.963788] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 [ 24.963871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.963941] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0 [ 24.964018] note: wpa_supplicant[391] exited with irqs disabled Fixes: d1369e51 ("wifi: mt76: connac: introduce mt76_connac_mcu_sta_wed_update utility routine") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
-
Felix Fietkau authored
A number of users reported that this support was working fine before it got removed. Add it back, but leave out the unsupported 80+80 mode. Fixes: ac922bd6 ("wifi: mt76: mt7915: remove BW160 and BW80+80 support") Signed-off-by:
-
Lorenzo Bianconi authored
Trying to probe a mt7921e pci card without firmware results in a successful probe where ieee80211_register_hw hasn't been called. When removing the driver, ieee802111_unregister_hw is called unconditionally leading to a kernel NULL pointer dereference. Fix the issue running mt76_unregister_device routine just for registered hw. Link: https://bugs.debian.org/1029116 Link: https://bugs.kali.org/view.php?id=8140Reported-by:
Stuart Hayhurst <stuart.a.hayhurst@gmail.com> Fixes: 1c71e03a ("mt76: mt7921: move mt7921_init_hw in a dedicated work") Tested-by:
Helmut Grohne <helmut@freexian.com> Signed-off-by:
-
- 10 Mar, 2023 4 commits
-
-
Johannes Berg authored
When disconnecting from an MLO connection we need the AP MLD address, not an arbitrary BSSID. Fix the code to do that. Fixes: 9ecff10e ("wifi: nl80211: refactor BSS lookup in nl80211_associate()") Signed-off-by:
Gregory Greenman <gregory.greenman@intel.com> Link: https://lore.kernel.org/r/20230301115906.4c1b3b18980e.I008f070c7f3b8e8bde9278101ef9e40706a82902@changeidSigned-off-by:
-
Johannes Berg authored
When userspace sets basic rates, it might send us some rates list that's empty or consists of invalid values only. We're currently ignoring invalid values and then may end up with a rates bitmap that's empty, which later results in a warning. Reject the call if there were no valid rates. Signed-off-by: -
Johannes Berg authored
This was meant to be a u32, and while applying the patch I tried to use policy validation for it. However, not only did I copy/paste it to u8 instead of u32, but also used the policy range erroneously. Fix both of these issues. Fixes: d7c1a9a0 ("wifi: nl80211: validate and configure puncturing bitmap") Signed-off-by:
-
Johannes Berg authored
If, e.g. in AP mode, the link was already created by userspace but not activated yet, it has a chandef but the chandef isn't valid and has no channel. Check for this and ignore this link. Fixes: 7b0a0e3c ("wifi: cfg80211: do some rework towards MLO link APIs") Signed-off-by:
-
- 09 Mar, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from netfilter and bpf. Current release - regressions: - core: avoid skb end_offset change in __skb_unclone_keeptruesize() - sched: - act_connmark: handle errno on tcf_idr_check_alloc - flower: fix fl_change() error recovery path - ieee802154: prevent user from crashing the host Current release - new code bugs: - eth: bnxt_en: fix the double free during device removal - tools: ynl: - fix enum-as-flags in the generic CLI - fully inherit attrs in subsets - re-license uniformly under GPL-2.0 or BSD-3-clause Previous releases - regressions: - core: use indirect calls helpers for sk_exit_memory_pressure() - tls: - fix return value for async crypto - avoid hanging tasks on the tx_lock - eth: ice: copy last block omitted in ice_get_module_eeprom() Previous releases - always broken: - core: avoid double iput when sock_alloc_file fails - af_unix: fix struct pid leaks in OOB support - tls: - fix possible race condition - fix device-offloaded sendpage straddling records - bpf: - sockmap: fix an infinite loop error - test_run: fix &xdp_frame misplacement for LIVE_FRAMES - fix resolving BTF_KIND_VAR after ARRAY, STRUCT, UNION, PTR - netfilter: tproxy: fix deadlock due to missing BH disable - phylib: get rid of unnecessary locking - eth: bgmac: fix *initial* chip reset to support BCM5358 - eth: nfp: fix csum for ipsec offload - eth: mtk_eth_soc: fix RX data corruption issue Misc: - usb: qmi_wwan: add telit 0x1080 composition" * tag 'net-6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (64 commits) tools: ynl: fix enum-as-flags in the generic CLI tools: ynl: move the enum classes to shared code net: avoid double iput when sock_alloc_file fails af_unix: fix struct pid leaks in OOB support eth: fealnx: bring back this old driver net: dsa: mt7530: permit port 5 to work without port 6 on MT7621 SoC net: microchip: sparx5: fix deletion of existing DSCP mappings octeontx2-af: Unlock contexts in the queue context cache in case of fault detection net/smc: fix fallback failed while sendmsg with fastopen ynl: re-license uniformly under GPL-2.0 OR BSD-3-Clause mailmap: update entries for Stephen Hemminger mailmap: add entry for Maxim Mikityanskiy nfc: change order inside nfc_se_io error path ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation net: usb: qmi_wwan: add Telit 0x1080 composition net: usb: cdc_mbim: avoid altsetting toggling for Telit FE990 netfilter: conntrack: adopt safer max chain length net: tls: fix device-offloaded sendpage straddling records ... -
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hidLinus Torvalds authored
Pull HID fixes from Benjamin Tissoires: - fix potential out of bound write of zeroes in HID core with a specially crafted uhid device (Lee Jones) - fix potential use-after-free in work function in intel-ish-hid (Reka Norman) - selftests config fixes (Benjamin Tissoires) - few device small fixes and support * tag 'for-linus-2023030901' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: intel-ish-hid: ipc: Fix potential use-after-free in work function HID: logitech-hidpp: Add support for Logitech MX Master 3S mouse HID: cp2112: Fix driver not registering GPIO IRQ chip as threaded selftest: hid: fix hid_bpf not set in config HID: uhid: Over-ride the default maximum data buffer value with our own HID: core: Provide new max_buffer_size attribute to over-ride the default
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fixes from Geert Uytterhoeven: - Fix systems with memory at end of 32-bit address space - Fix initrd on systems where memory does not start at address zero - Fix 68030 handling of bus errors for addresses in exception tables * tag 'm68k-for-v6.3-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Only force 030 bus error if PC not in exception table m68k: mm: Move initrd phys_to_virt handling after paging_init() m68k: mm: Fix systems with memory at end of 32-bit address space
-
Al Viro authored
We fetch %SR value from sigframe; it might have been modified by signal handler, so we can't trust it with any bits that are not modifiable in user mode. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Rich Felker <dalias@libc.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queuePaolo Abeni authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-03-07 (ice) This series contains updates to ice driver only. Dave removes masking from pfcena field as it was incorrectly preventing valid traffic classes from being enabled. Michal resolves various smatch issues such as not propagating error codes and returning 0 explicitly. Arnd Bergmann resolves gcc-9 warning for integer overflow. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: ethernet: ice: avoid gcc-9 integer overflow warning ice: don't ignore return codes in VSI related code ice: Fix DSCP PFC TLV creation ==================== Link: https://lore.kernel.org/r/20230307220714.3997294-1-anthony.l.nguyen@intel.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== tools: ynl: fix enum-as-flags in the generic CLI The CLI needs to use proper classes when looking at Enum definitions rather than interpreting the YAML spec ad-hoc, because we have more than on format of the definition supported. ==================== Link: https://lore.kernel.org/r/20230308003923.445268-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Lorenzo points out that the generic CLI is broken for the netdev family. When I added the support for documentation of enums (and sparse enums) the client script was not updated. It expects the values in enum to be a list of names, now it can also be a dict (YAML object). Reported-by:
-
Jakub Kicinski authored
Move bulk of the EnumSet and EnumEntry code to shared code for reuse by cli. Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
When sock_alloc_file fails to allocate a file, it will call sock_release. __sys_socket_file should then not call sock_release again, otherwise there will be a double free. [ 89.319884] ------------[ cut here ]------------ [ 89.320286] kernel BUG at fs/inode.c:1764! [ 89.320656] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 89.321051] CPU: 7 PID: 125 Comm: iou-sqp-124 Not tainted 6.2.0+ #361 [ 89.321535] RIP: 0010:iput+0x1ff/0x240 [ 89.321808] Code: d1 83 e1 03 48 83 f9 02 75 09 48 81 fa 00 10 00 00 77 05 83 e2 01 75 1f 4c 89 ef e8 fb d2 ba 00 e9 80 fe ff ff c3 cc cc cc cc <0f> 0b 0f 0b e9 d0 fe ff ff 0f 0b eb 8d 49 8d b4 24 08 01 00 00 48 [ 89.322760] RSP: 0018:ffffbdd60068bd50 EFLAGS: 00010202 [ 89.323036] RAX: 0000000000000000 RBX: ffff9d7ad3cacac0 RCX: 0000000000001107 [ 89.323412] RDX: 000000000003af00 RSI: 0000000000000000 RDI: ffff9d7ad3cacb40 [ 89.323785] RBP: ffffbdd60068bd68 R08: ffffffffffffffff R09: ffffffffab606438 [ 89.324157] R10: ffffffffacb3dfa0 R11: 6465686361657256 R12: ffff9d7ad3cacb40 [ 89.324529] R13: 0000000080000001 R14: 0000000080000001 R15: 0000000000000002 [ 89.324904] FS: 00007f7b28516740(0000) GS:ffff9d7aeb1c0000(0000) knlGS:0000000000000000 [ 89.325328] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 89.325629] CR2: 00007f0af52e96c0 CR3: 0000000002a02006 CR4: 0000000000770ee0 [ 89.326004] PKRU: 55555554 [ 89.326161] Call Trace: [ 89.326298] <TASK> [ 89.326419] __sock_release+0xb5/0xc0 [ 89.326632] __sys_socket_file+0xb2/0xd0 [ 89.326844] io_socket+0x88/0x100 [ 89.327039] ? io_issue_sqe+0x6a/0x430 [ 89.327258] io_issue_sqe+0x67/0x430 [ 89.327450] io_submit_sqes+0x1fe/0x670 [ 89.327661] io_sq_thread+0x2e6/0x530 [ 89.327859] ? __pfx_autoremove_wake_function+0x10/0x10 [ 89.328145] ? __pfx_io_sq_thread+0x10/0x10 [ 89.328367] ret_from_fork+0x29/0x50 [ 89.328576] RIP: 0033:0x0 [ 89.328732] Code: Unable to access opcode bytes at 0xffffffffffffffd6. [ 89.329073] RSP: 002b:0000000000000000 EFLAGS: 00000202 ORIG_RAX: 00000000000001a9 [ 89.329477] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007f7b28637a3d [ 89.329845] RDX: 00007fff4e4318a8 RSI: 00007fff4e4318b0 RDI: 0000000000000400 [ 89.330216] RBP: 00007fff4e431830 R08: 00007fff4e431711 R09: 00007fff4e4318b0 [ 89.330584] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff4e441b38 [ 89.330950] R13: 0000563835e3e725 R14: 0000563835e40d10 R15: 00007f7b28784040 [ 89.331318] </TASK> [ 89.331441] Modules linked in: [ 89.331617] ---[ end trace 0000000000000000 ]--- Fixes: da214a47 ("net: add __sys_socket_file()") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Jens Axboe <axboe@kernel.dk> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20230307173707.468744-1-cascardo@canonical.comSigned-off-by:
-
Eric Dumazet authored
syzbot reported struct pid leak [1]. Issue is that queue_oob() calls maybe_add_creds() which potentially holds a reference on a pid. But skb->destructor is not set (either directly or by calling unix_scm_to_skb()) This means that subsequent kfree_skb() or consume_skb() would leak this reference. In this fix, I chose to fully support scm even for the OOB message. [1] BUG: memory leak unreferenced object 0xffff8881053e7f80 (size 128): comm "syz-executor242", pid 5066, jiffies 4294946079 (age 13.220s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff812ae26a>] alloc_pid+0x6a/0x560 kernel/pid.c:180 [<ffffffff812718df>] copy_process+0x169f/0x26c0 kernel/fork.c:2285 [<ffffffff81272b37>] kernel_clone+0xf7/0x610 kernel/fork.c:2684 [<ffffffff812730cc>] __do_sys_clone+0x7c/0xb0 kernel/fork.c:2825 [<ffffffff849ad699>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff849ad699>] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 [<ffffffff84a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Fixes: 314001f0 ("af_unix: Add OOB support") Reported-by: syzbot+7699d9e5635c10253a27@syzkaller.appspotmail.com Signed-off-by:
-
Jakub Kicinski authored
This reverts commit d5e2d038. We have a report of this chip being used on a SURECOM EP-320X-S 100/10M Ethernet PCI Adapter which could still have been purchased in some parts of the world 3 years ago. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=217151 Fixes: d5e2d038 ("eth: fealnx: delete the driver for Myson MTD-800") Link: https://lore.kernel.org/r/20230307171930.4008454-1-kuba@kernel.orgSigned-off-by:
-
Vladimir Oltean authored
The MT7530 switch from the MT7621 SoC has 2 ports which can be set up as internal: port 5 and 6. Arınç reports that the GMAC1 attached to port 5 receives corrupted frames, unless port 6 (attached to GMAC0) has been brought up by the driver. This is true regardless of whether port 5 is used as a user port or as a CPU port (carrying DSA tags). Offline debugging (blind for me) which began in the linked thread showed experimentally that the configuration done by the driver for port 6 contains a step which is needed by port 5 as well - the write to CORE_GSWPLL_GRP2 (note that I've no idea as to what it does, apart from the comment "Set core clock into 500Mhz"). Prints put by Arınç show that the reset value of CORE_GSWPLL_GRP2 is RG_GSWPLL_POSDIV_500M(1) | RG_GSWPLL_FBKDIV_500M(40) (0x128), both on the MCM MT7530 from the MT7621 SoC, as well as on the standalone MT7530 from MT7623NI Bananapi BPI-R2. Apparently, port 5 on the standalone MT7530 can work under both values of the register, while on the MT7621 SoC it cannot. The call path that triggers the register write is: mt753x_phylink_mac_config() for port 6 -> mt753x_pad_setup() -> mt7530_pad_clk_setup() so this fully explains the behavior noticed by Arınç, that bringing port 6 up is necessary. The simplest fix for the problem is to extract the register writes which are needed for both port 5 and 6 into a common mt7530_pll_setup() function, which is called at mt7530_setup() time, immediately after switch reset. We can argue that this mirrors the code layout introduced in mt7531_setup() by commit 42bc4faf ("net: mt7531: only do PLL once after the reset"), in that the PLL setup has the exact same positioning, and further work to consolidate the separate setup() functions is not hindered. Testing confirms that: - the slight reordering of writes to MT7530_P6ECR and to CORE_GSWPLL_GRP1 / CORE_GSWPLL_GRP2 introduced by this change does not appear to cause problems for the operation of port 6 on MT7621 and on MT7623 (where port 5 also always worked) - packets sent through port 5 are not corrupted anymore, regardless of whether port 6 is enabled by phylink or not (or even present in the device tree) My algorithm for determining the Fixes: tag is as follows. Testing shows that some logic from mt7530_pad_clk_setup() is needed even for port 5. Prior to commit ca366d6c ("net: dsa: mt7530: Convert to PHYLINK API"), a call did exist for all phy_is_pseudo_fixed_link() ports - so port 5 included. That commit replaced it with a temporary "Port 5 is not supported!" comment, and the following commit 38f790a8 ("net: dsa: mt7530: Add support for port 5") replaced that comment with a configuration procedure in mt7530_setup_port5() which was insufficient for port 5 to work. I'm laying the blame on the patch that claimed support for port 5, although one would have also needed the change from commit c3b8e079 ("net: dsa: mt7530: setup core clock even in TRGMII mode") for the write to be performed completely independently from port 6's configuration. Thanks go to Arınç for describing the problem, for debugging and for testing. Reported-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/netdev/f297c2c4-6e7c-57ac-2394-f6025d309b9d@arinc9.com/ Fixes: 38f790a8 ("net: dsa: mt7530: Add support for port 5") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
-
- 08 Mar, 2023 6 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fsLinus Torvalds authored
Pull udf fixes from Jan Kara: "Fix bugs in UDF caused by the big pile of changes that went in during the merge window" * tag 'fs_for_v6.3-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: udf: Warn if block mapping is done for in-ICB files udf: Fix reading of in-ICB files udf: Fix lost writes in udf_adinicb_writepage()
-
Linus Torvalds authored
Merge tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver fixes from Hans de Goede: "A small set of assorted bug and build/warning fixes" * tag 'platform-drivers-x86-v6.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: platform: mellanox: mlx-platform: Initialize shift variable to 0 platform/x86: int3472: Add GPIOs to Surface Go 3 Board data platform/x86: ISST: Fix kernel documentation warnings platform: x86: MLX_PLATFORM: select REGMAP instead of depending on it platform: mellanox: select REGMAP instead of depending on it platform/x86/intel/tpmi: Fix double free reported by Smatch platform/x86: ISST: Increase range of valid mail box commands platform/x86: dell-ddv: Fix temperature scaling platform/x86: dell-ddv: Fix cache invalidation on resume platform/x86/amd: pmc: remove CONFIG_SUSPEND checks
-
Linus Torvalds authored
The implementation of 'current' on x86 is very intentionally special: it is a very common thing to look up, and it uses 'this_cpu_read_stable()' to get the current thread pointer efficiently from per-cpu storage. And the keyword in there is 'stable': the current thread pointer never changes as far as a single thread is concerned. Even if when a thread is preempted, or moved to another CPU, or even across an explicit call 'schedule()' that thread will still have the same value for 'current'. It is, after all, the kernel base pointer to thread-local storage. That's why it's stable to begin with, but it's also why it's important enough that we have that special 'this_cpu_read_stable()' access for it. So this is all done very intentionally to allow the compiler to treat 'current' as a value that never visibly changes, so that the compiler can do CSE and combine multiple different 'current' accesses into one. However, there is obviously one very special situation when the currently running thread does actually change: inside the scheduler itself. So the scheduler code paths are special, and do not have a 'current' thread at all. Instead there are _two_ threads: the previous and the next thread - typically called 'prev' and 'next' (or prev_p/next_p) internally. So this is all actually quite straightforward and simple, and not all that complicated. Except for when you then have special code that is run in scheduler context, that code then has to be aware that 'current' isn't really a valid thing. Did you mean 'prev'? Did you mean 'next'? In fact, even if then look at the code, and you use 'current' after the new value has been assigned to the percpu variable, we have explicitly told the compiler that 'current' is magical and always stable. So the compiler is quite free to use an older (or newer) value of 'current', and the actual assignment to the percpu storage is not relevant even if it might look that way. Which is exactly what happened in the resctl code, that blithely used 'current' in '__resctrl_sched_in()' when it really wanted the new process state (as implied by the name: we're scheduling 'into' that new resctl state). And clang would end up just using the old thread pointer value at least in some configurations. This could have happened with gcc too, and purely depends on random compiler details. Clang just seems to have been more aggressive about moving the read of the per-cpu current_task pointer around. The fix is trivial: just make the resctl code adhere to the scheduler rules of using the prev/next thread pointer explicitly, instead of using 'current' in a situation where it just wasn't valid. That same code is then also used outside of the scheduler context (when a thread resctl state is explicitly changed), and then we will just pass in 'current' as that pointer, of course. There is no ambiguity in that case. The fix may be trivial, but noticing and figuring out what went wrong was not. The credit for that goes to Stephane Eranian. Reported-by:
Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/lkml/20230303231133.1486085-1-eranian@google.com/ Link: https://lore.kernel.org/lkml/alpine.LFD.2.01.0908011214330.3304@localhost.localdomain/Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Tony Luck <tony.luck@intel.com> Tested-by:
Babu Moger <babu.moger@amd.com> Cc: stable@kernel.org Signed-off-by:
-
Daniel Machon authored
Fix deletion of existing DSCP mappings in the APP table. Adding and deleting DSCP entries are replicated per-port, since the mapping table is global for all ports in the chip. Whenever a mapping for a DSCP value already exists, the old mapping is deleted first. However, it is only deleted for the specified port. Fix this by calling sparx5_dcb_ieee_delapp() instead of dcb_ieee_delapp() as it ought to be. Reproduce: // Map and remap DSCP value 63 $ dcb app add dev eth0 dscp-prio 63:1 $ dcb app add dev eth0 dscp-prio 63:2 $ dcb app show dev eth0 dscp-prio dscp-prio 63:2 $ dcb app show dev eth1 dscp-prio dscp-prio 63:1 63:2 <-- 63:1 should not be there Fixes: 8dcf69a6 ("net: microchip: sparx5: add support for offloading dscp table") Signed-off-by:
Daniel Machon <daniel.machon@microchip.com> Reviewed-by:
David S. Miller <davem@davemloft.net>
-
Suman Ghosh authored
NDC caches contexts of frequently used queue's (Rx and Tx queues) contexts. Due to a HW errata when NDC detects fault/poision while accessing contexts it could go into an illegal state where a cache line could get locked forever. To makesure all cache lines in NDC are available for optimum performance upon fault/lockerror/posion errors scan through all cache lines in NDC and clear the lock bit. Fixes: 4a3581cd ("octeontx2-af: NPA AQ instruction enqueue support") Signed-off-by:
Suman Ghosh <sumang@marvell.com> Signed-off-by:
Sunil Kovvuri Goutham <sgoutham@marvell.com> Signed-off-by:
Sai Krishna <saikrishnag@marvell.com> Reviewed-by:
-
D. Wythe authored
Before determining whether the msg has unsupported options, it has been prematurely terminated by the wrong status check. For the application, the general usages of MSG_FASTOPEN likes fd = socket(...) /* rather than connect */ sendto(fd, data, len, MSG_FASTOPEN) Hence, We need to check the flag before state check, because the sock state here is always SMC_INIT when applications tries MSG_FASTOPEN. Once we found unsupported options, fallback it to TCP. Fixes: ee9dfbef ("net/smc: handle sockopts forcing fallback") Signed-off-by:
D. Wythe <alibuda@linux.alibaba.com> Signed-off-by:
Tony Lu <tonylu@linux.alibaba.com> Signed-off-by:
-
- 07 Mar, 2023 6 commits
-
-
Jakub Kicinski authored
I was intending to make all the Netlink Spec code BSD-3-Clause to ease the adoption but it appears that: - I fumbled the uAPI and used "GPL WITH uAPI note" there - it gives people pause as they expect GPL in the kernel As suggested by Chuck re-license under dual. This gives us benefit of full BSD freedom while fulfilling the broad "kernel is under GPL" expectations. Link: https://lore.kernel.org/all/20230304120108.05dd44c5@kernel.org/ Link: https://lore.kernel.org/r/20230306200457.3903854-1-kuba@kernel.orgSigned-off-by:
-
Stephen Hemminger authored
Map all my old email addresses to current address. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Link: https://lore.kernel.org/r/20230306194405.108236-1-stephen@networkplumber.orgSigned-off-by:
-
Jakub Kicinski authored
Map Maxim's old corporate addresses to his personal one. Link: https://lore.kernel.org/r/20230306192018.3894988-1-kuba@kernel.orgSigned-off-by:
-
Fedor Pchelkin authored
cb_context should be freed on the error path in nfc_se_io as stated by commit 25ff6f8a ("nfc: fix memory leak of se_io context in nfc_genl_se_io"). Make the error path in nfc_se_io unwind everything in reverse order, i.e. free the cb_context after unlocking the device. Suggested-by:
Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by:
-
Arnd Bergmann authored
With older compilers like gcc-9, the calculation of the vlan priority field causes a false-positive warning from the byteswap: In file included from drivers/net/ethernet/intel/ice/ice_tc_lib.c:4: drivers/net/ethernet/intel/ice/ice_tc_lib.c: In function 'ice_parse_cls_flower': include/uapi/linux/swab.h:15:15: error: integer overflow in expression '(int)(short unsigned int)((int)match.key-><U67c8>.<U6698>.vlan_priority << 13) & 57344 & 255' of type 'int' results in '0' [-Werror=overflow] 15 | (((__u16)(x) & (__u16)0x00ffU) << 8) | \ | ~~~~~~~~~~~~^~~~~~~~~~~~~~~~~ include/uapi/linux/swab.h:106:2: note: in expansion of macro '___constant_swab16' 106 | ___constant_swab16(x) : \ | ^~~~~~~~~~~~~~~~~~ include/uapi/linux/byteorder/little_endian.h:42:43: note: in expansion of macro '__swab16' 42 | #define __cpu_to_be16(x) ((__force __be16)__swab16((x))) | ^~~~~~~~ include/linux/byteorder/generic.h:96:21: note: in expansion of macro '__cpu_to_be16' 96 | #define cpu_to_be16 __cpu_to_be16 | ^~~~~~~~~~~~~ drivers/net/ethernet/intel/ice/ice_tc_lib.c:1458:5: note: in expansion of macro 'cpu_to_be16' 1458 | cpu_to_be16((match.key->vlan_priority << | ^~~~~~~~~~~ After a change to be16_encode_bits(), the code becomes more readable to both people and compilers, which avoids the warning. Fixes: 34800178 ("ice: Add support for VLAN priority filters in switchdev") Suggested-by:Alexander Lobakin <alexandr.lobakin@intel.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Michal Swiatkowski authored
There were few smatch warnings reported by Dan: - ice_vsi_cfg_xdp_txqs can return 0 instead of ret, which is cleaner - return values in ice_vsi_cfg_def were ignored - in ice_vsi_rebuild return value was ignored in case rebuild failed, it was a never reached code, however, rewrite it for clarity. - ice_vsi_cfg_tc can return 0 instead of ret Fixes: 6624e780 ("ice: split ice_vsi_setup into smaller functions") Reported-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by:
-
