- 19 Aug, 2014 27 commits
-
-
Max Filippov authored
commit 17290231 upstream. There are two FIXMEs in the double exception handler 'for the extremely unlikely case'. This case gets hit by gcc during kernel build once in a few hours, resulting in an unrecoverable exception condition. Provide missing fixup routine to handle this case. Double exception literals now need 8 more bytes, add them to the linker script. Also replace bbsi instructions with bbsi.l as we're branching depending on 8th and 7th LSB-based bits of exception address. This may be tested by adding the explicit DTLB invalidation to window overflow handlers, like the following: # --- a/arch/xtensa/kernel/vectors.S # +++ b/arch/xtensa/kernel/vectors.S # @@ -592,6 +592,14 @@ ENDPROC(_WindowUnderflow4) # ENTRY_ALIGN64(_WindowOverflow8) # # s32e a0, a9, -16 # + bbsi.l a9, 31, 1f # + rsr a0, ccount # + bbsi.l a0, 4, 1f # + pdtlb a0, a9 # + idtlb a0 # + movi a0, 9 # + idtlb a0 # +1: # l32e a0, a1, -12 # s32e a2, a9, -8 # s32e a1, a9, -12 Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
Johannes Berg authored
commit 08b99399 upstream. This reverts commit 277d916f as it was at least breaking iwlwifi by setting the IEEE80211_TX_CTL_NO_PS_BUFFER flag in all kinds of interface modes, not only for AP mode where it is appropriate. To avoid reintroducing the original problem, explicitly check for probe request frames in the multicast buffering code. Fixes: 277d916f ("mac80211: move "bufferable MMPDU" check to fix AP mode scan") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Malcolm Priestley authored
commit 6cff1f6a upstream. WARNING: CPU: 0 PID: 929 at /home/apw/COD/linux/kernel/irq/handle.c:147 handle_irq_event_percpu+0x1d1/0x1e0() irq 17 handler device_intr+0x0/0xa80 [vt6655_stage] enabled interrupts Using spin_lock_irqsave appears to fix this. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Andy Lutomirski authored
commit 7209a75d upstream. This moves the espfix64 logic into native_iret. To make this work, it gets rid of the native patch for INTERRUPT_RETURN: INTERRUPT_RETURN on native kernels is now 'jmp native_iret'. This changes the 16-bit SS behavior on Xen from OOPSing to leaking some bits of the Xen hypervisor's RSP (I think). [ hpa: this is a nonzero cost on native, but probably not enough to measure. Xen needs to fix this in their own code, probably doing something equivalent to espfix64. ] Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/7b8f1d8ef6597cb16ae004a43c56980a7de3cf94.1406129132.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit 34273f41 upstream. Embedded systems, which may be very memory-size-sensitive, are extremely unlikely to ever encounter any 16-bit software, so make it a CONFIG_EXPERT option to turn off support for any 16-bit software whatsoever. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Link: http://lkml.kernel.org/r/1398816946-3351-1-git-send-email-hpa@linux.intel.comSigned-off-by:
-
H. Peter Anvin authored
commit 197725de upstream. Make espfix64 a hidden Kconfig option. This fixes the x86-64 UML build which had broken due to the non-existence of init_espfix_bsp() in UML: since UML uses its own Kconfig, this option does not appear in the UML build. This also makes it possible to make support for 16-bit segments a configuration option, for the people who want to minimize the size of the kernel. Reported-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
H. Peter Anvin authored
commit 20b68535 upstream. Header guard is #ifndef, not #ifdef... Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
-
H. Peter Anvin authored
commit e1fe9ed8 upstream. Sparse warns that the percpu variables aren't declared before they are defined. Rather than hacking around it, move espfix definitions into a proper header file. Reported-by:
-
H. Peter Anvin authored
commit 3891a04a upstream. The IRET instruction, when returning to a 16-bit segment, only restores the bottom 16 bits of the user space stack pointer. This causes some 16-bit software to break, but it also leaks kernel state to user space. We have a software workaround for that ("espfix") for the 32-bit kernel, but it relies on a nonzero stack segment base which is not available in 64-bit mode. In checkin: b3b42ac2 x86-64, modify_ldt: Ban 16-bit segments on 64-bit kernels we "solved" this by forbidding 16-bit segments on 64-bit kernels, with the logic that 16-bit support is crippled on 64-bit kernels anyway (no V86 support), but it turns out that people are doing stuff like running old Win16 binaries under Wine and expect it to work. This works around this by creating percpu "ministacks", each of which is mapped 2^16 times 64K apart. When we detect that the return SS is on the LDT, we copy the IRET frame to the ministack and use the relevant alias to return to userspace. The ministacks are mapped readonly, so if IRET faults we promote #GP to #DF which is an IST vector and thus has its own stack; we then do the fixup in the #DF handler. (Making #GP an IST exception would make the msr_safe functions unsafe in NMI/MC context, and quite possibly have other effects.) Special thanks to: - Andy Lutomirski, for the suggestion of using very small stack slots and copy (as opposed to map) the IRET frame there, and for the suggestion to mark them readonly and let the fault promote to #DF. - Konrad Wilk for paravirt fixup and testing. - Borislav Petkov for testing help and useful comments. Reported-by:
Brian Gerst <brgerst@gmail.com> Signed-off-by:
-
H. Peter Anvin authored
commit 7ed6fb9b upstream. This reverts commit fa81511b in preparation of merging in the proper fix (espfix64). Signed-off-by:
-
Jan Kara authored
commit 504d5874 upstream. clockevents_increase_min_delta() calls printk() from under hrtimer_bases.lock. That causes lock inversion on scheduler locks because printk() can call into the scheduler. Lockdep puts it as: ====================================================== [ INFO: possible circular locking dependency detected ] 3.15.0-rc8-06195-g939f04be #2 Not tainted ------------------------------------------------------- trinity-main/74 is trying to acquire lock: (&port_lock_key){-.....}, at: [<811c60be>] serial8250_console_write+0x8c/0x10c but task is already holding lock: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #5 (hrtimer_bases.lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<8103c918>] __hrtimer_start_range_ns+0x1c/0x197 [<8107ec20>] perf_swevent_start_hrtimer.part.41+0x7a/0x85 [<81080792>] task_clock_event_start+0x3a/0x3f [<810807a4>] task_clock_event_add+0xd/0x14 [<8108259a>] event_sched_in+0xb6/0x17a [<810826a2>] group_sched_in+0x44/0x122 [<81082885>] ctx_sched_in.isra.67+0x105/0x11f [<810828e6>] perf_event_sched_in.isra.70+0x47/0x4b [<81082bf6>] __perf_install_in_context+0x8b/0xa3 [<8107eb8e>] remote_function+0x12/0x2a [<8105f5af>] smp_call_function_single+0x2d/0x53 [<8107e17d>] task_function_call+0x30/0x36 [<8107fb82>] perf_install_in_context+0x87/0xbb [<810852c9>] SYSC_perf_event_open+0x5c6/0x701 [<810856f9>] SyS_perf_event_open+0x17/0x19 [<8142f8ee>] syscall_call+0x7/0xb -> #4 (&ctx->lock){......}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 -> #3 (&rq->lock){-.-.-.}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f04c>] _raw_spin_lock+0x21/0x30 [<81040873>] __task_rq_lock+0x33/0x3a [<8104184c>] wake_up_new_task+0x25/0xc2 [<8102474b>] do_fork+0x15c/0x2a0 [<810248a9>] kernel_thread+0x1a/0x1f [<814232a2>] rest_init+0x1a/0x10e [<817af949>] start_kernel+0x303/0x308 [<817af2ab>] i386_start_kernel+0x79/0x7d -> #2 (&p->pi_lock){-.-...}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<810413dd>] try_to_wake_up+0x1d/0xd6 [<810414cd>] default_wake_function+0xb/0xd [<810461f3>] __wake_up_common+0x39/0x59 [<81046346>] __wake_up+0x29/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #1 (&tty->write_wait){-.....}: [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<81046332>] __wake_up+0x15/0x3b [<811b8733>] tty_wakeup+0x49/0x51 [<811c3568>] uart_write_wakeup+0x17/0x19 [<811c5dc1>] serial8250_tx_chars+0xbc/0xfb [<811c5f28>] serial8250_handle_irq+0x54/0x6a [<811c5f57>] serial8250_default_handle_irq+0x19/0x1c [<811c56d8>] serial8250_interrupt+0x38/0x9e [<810510e7>] handle_irq_event_percpu+0x5f/0x1e2 [<81051296>] handle_irq_event+0x2c/0x43 [<81052cee>] handle_level_irq+0x57/0x80 [<81002a72>] handle_irq+0x46/0x5c [<810027df>] do_IRQ+0x32/0x89 [<8143036e>] common_interrupt+0x2e/0x33 [<8142f23c>] _raw_spin_unlock_irqrestore+0x3f/0x49 [<811c25a4>] uart_start+0x2d/0x32 [<811c2c04>] uart_write+0xc7/0xd6 [<811bc6f6>] n_tty_write+0xb8/0x35e [<811b9beb>] tty_write+0x163/0x1e4 [<811b9cd9>] redirected_tty_write+0x6d/0x75 [<810b6ed6>] vfs_write+0x75/0xb0 [<810b7265>] SyS_write+0x44/0x77 [<8142f8ee>] syscall_call+0x7/0xb -> #0 (&port_lock_key){-.....}: [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105c548>] clockevents_program_event+0xe7/0xf3 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8142cacc>] __schedule+0x4c6/0x4cb [<8142cae0>] schedule+0xf/0x11 [<8142f9a6>] work_resched+0x5/0x30 other info that might help us debug this: Chain exists of: &port_lock_key --> &ctx->lock --> hrtimer_bases.lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hrtimer_bases.lock); lock(&ctx->lock); lock(hrtimer_bases.lock); lock(&port_lock_key); *** DEADLOCK *** 4 locks held by trinity-main/74: #0: (&rq->lock){-.-.-.}, at: [<8142c6f3>] __schedule+0xed/0x4cb #1: (&ctx->lock){......}, at: [<81081df3>] __perf_event_task_sched_out+0x1dc/0x34f #2: (hrtimer_bases.lock){-.-...}, at: [<8103caeb>] hrtimer_try_to_cancel+0x13/0x66 #3: (console_lock){+.+...}, at: [<8104fb5d>] vprintk_emit+0x3c7/0x3e4 stack backtrace: CPU: 0 PID: 74 Comm: trinity-main Not tainted 3.15.0-rc8-06195-g939f04be #2 00000000 81c3a310 8b995c14 81426f69 8b995c44 81425a99 8161f671 8161f570 8161f538 8161f559 8161f538 8b995c78 8b142bb0 00000004 8b142fdc 8b142bb0 8b995ca8 8104a62d 8b142fac 000016f2 81c3a310 00000001 00000001 00000003 Call Trace: [<81426f69>] dump_stack+0x16/0x18 [<81425a99>] print_circular_bug+0x18f/0x19c [<8104a62d>] __lock_acquire+0x9ea/0xc6d [<8104a942>] lock_acquire+0x92/0x101 [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8142f11d>] _raw_spin_lock_irqsave+0x2e/0x3e [<811c60be>] ? serial8250_console_write+0x8c/0x10c [<811c60be>] serial8250_console_write+0x8c/0x10c [<8104af87>] ? lock_release+0x191/0x223 [<811c6032>] ? wait_for_xmitr+0x76/0x76 [<8104e402>] call_console_drivers.constprop.31+0x87/0x118 [<8104f5d5>] console_unlock+0x1d7/0x398 [<8104fb70>] vprintk_emit+0x3da/0x3e4 [<81425f76>] printk+0x17/0x19 [<8105bfa0>] clockevents_program_min_delta+0x104/0x116 [<8105cc1c>] tick_program_event+0x1e/0x23 [<8103c43c>] hrtimer_force_reprogram+0x88/0x8f [<8103c49e>] __remove_hrtimer+0x5b/0x79 [<8103cb21>] hrtimer_try_to_cancel+0x49/0x66 [<8103cb4b>] hrtimer_cancel+0xd/0x18 [<8107f102>] perf_swevent_cancel_hrtimer.part.60+0x2b/0x30 [<81080705>] task_clock_event_stop+0x20/0x64 [<81080756>] task_clock_event_del+0xd/0xf [<81081350>] event_sched_out+0xab/0x11e [<810813e0>] group_sched_out+0x1d/0x66 [<81081682>] ctx_sched_out+0xaf/0xbf [<81081e04>] __perf_event_task_sched_out+0x1ed/0x34f [<8104416d>] ? __dequeue_entity+0x23/0x27 [<81044505>] ? pick_next_task_fair+0xb1/0x120 [<8142cacc>] __schedule+0x4c6/0x4cb [<81047574>] ? trace_hardirqs_off_caller+0xd7/0x108 [<810475b0>] ? trace_hardirqs_off+0xb/0xd [<81056346>] ? rcu_irq_exit+0x64/0x77 Fix the problem by using printk_deferred() which does not call into the scheduler. Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
John Stultz authored
commit aac74dc4 upstream. After learning we'll need some sort of deferred printk functionality in the timekeeping core, Peter suggested we rename the printk_sched function so it can be reused by needed subsystems. This only changes the function name. No logic changes. Signed-off-by:
John Stultz <john.stultz@linaro.org> Reviewed-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Jan Kara <jack@suse.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Jiri Bohac <jbohac@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Anssi Hannula authored
commit 44fa816b upstream. nr_dirty is updated without locking, causing it to drift so that it is non-zero (either a small positive integer, or a very large one when an underflow occurs) even when there are no actual dirty blocks. This was due to a race between the workqueue and map function accessing nr_dirty in parallel without proper protection. People were seeing under runs due to a race on increment/decrement of nr_dirty, see: https://lkml.org/lkml/2014/6/3/648 Fix this by using an atomic_t for nr_dirty. Reported-by: roma1390@gmail.com Signed-off-by:
Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by:
Joe Thornber <ejt@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Greg Thelen authored
commit d8c712ea upstream. 1d3d4437 ("vmscan: per-node deferred work") added a flags field to struct shrinker assuming that all shrinkers were zero filled. The dm bufio shrinker is not zero filled, which leaves arbitrary kmalloc() data in flags. So far the only defined flags bit is SHRINKER_NUMA_AWARE. But there are proposed patches which add other bits to shrinker.flags (e.g. memcg awareness). Rather than simply initializing the shrinker, this patch uses kzalloc() when allocating the dm_bufio_client to ensure that the embedded shrinker and any other similar structures are zeroed. This fixes theoretical over aggressive shrinking of dm bufio objects. If the uninitialized dm_bufio_client.shrinker.flags contains SHRINKER_NUMA_AWARE then shrink_slab() would call the dm shrinker for each numa node rather than just once. This has been broken since 3.12. Signed-off-by:
Greg Thelen <gthelen@google.com> Acked-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Lars-Peter Clausen authored
commit 61bd55ce upstream. When creating the demux table we need to iterate over the selected scan mask for the buffer to get the samples which should be copied to destination buffer. Right now the code uses the mask which contains all active channels, which means the demux table contains entries which causes it to copy all the samples from source to destination buffer one by one without doing any demuxing. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Peter Meerwald authored
commit 9b2a4d35 upstream. val2 should be zero This will make no difference for correct inputs but will reject incorrect ones with a decimal part in the value written to the sysfs interface. Signed-off-by:
Peter Meerwald <pmeerw@pmeerw.net> Cc: Oleksandr Kravchenko <o.v.kravchenko@globallogic.com> Signed-off-by:
-
Peter Meerwald authored
commit 381676d5 upstream. The userspace interface for acceleration sensors is documented as using m/s^2 units [Documentation/ABI/testing/sysfs-bus-iio] The fullscale raw values for the BMA80 corresponds to -/+ 1, 1.5, 2, etc G depending on the selected mode. The scale table was converting to G rather than m/s^2. Change the scaling table to match the documented interface. See commit 71702e6e, iio: mma8452: Use correct acceleration units, for a related fix. Signed-off-by:
-
Malcolm Priestley authored
commit 4aa0abed upstream. byReAssocCount is incremented every second resulting in disassociated message being send every 10 seconds whether connection or not. byReAssocCount should only advance while eCommandState is in WLAN_ASSOCIATE_WAIT Change existing scope to if condition. Signed-off-by:
-
Michal Hocko authored
commit 2bcf2e92 upstream. Paul Furtado has reported the following GPF: general protection fault: 0000 [#1] SMP Modules linked in: ipv6 dm_mod xen_netfront coretemp hwmon x86_pkg_temp_thermal crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel ablk_helper cryptd lrw gf128mul glue_helper aes_x86_64 microcode pcspkr ext4 jbd2 mbcache raid0 xen_blkfront CPU: 3 PID: 3062 Comm: java Not tainted 3.16.0-rc5 #1 task: ffff8801cfe8f170 ti: ffff8801d2ec4000 task.ti: ffff8801d2ec4000 RIP: e030:mem_cgroup_oom_synchronize+0x140/0x240 RSP: e02b:ffff8801d2ec7d48 EFLAGS: 00010283 RAX: 0000000000000001 RBX: ffff88009d633800 RCX: 000000000000000e RDX: fffffffffffffffe RSI: ffff88009d630200 RDI: ffff88009d630200 RBP: ffff8801d2ec7da8 R08: 0000000000000012 R09: 00000000fffffffe R10: 0000000000000000 R11: 0000000000000000 R12: ffff88009d633800 R13: ffff8801d2ec7d48 R14: dead000000100100 R15: ffff88009d633a30 FS: 00007f1748bb4700(0000) GS:ffff8801def80000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f4110300308 CR3: 00000000c05f7000 CR4: 0000000000002660 Call Trace: pagefault_out_of_memory+0x18/0x90 mm_fault_error+0xa9/0x1a0 __do_page_fault+0x478/0x4c0 do_page_fault+0x2c/0x40 page_fault+0x28/0x30 Code: 44 00 00 48 89 df e8 40 ca ff ff 48 85 c0 49 89 c4 74 35 4c 8b b0 30 02 00 00 4c 8d b8 30 02 00 00 4d 39 fe 74 1b 0f 1f 44 00 00 <49> 8b 7e 10 be 01 00 00 00 e8 42 d2 04 00 4d 8b 36 4d 39 fe 75 RIP mem_cgroup_oom_synchronize+0x140/0x240 Commit fb2a6fc5 ("mm: memcg: rework and document OOM waiting and wakeup") has moved mem_cgroup_oom_notify outside of memcg_oom_lock assuming it is protected by the hierarchical OOM-lock. Although this is true for the notification part the protection doesn't cover unregistration of event which can happen in parallel now so mem_cgroup_oom_notify can see already unlinked and/or freed mem_cgroup_eventfd_list. Fix this by using memcg_oom_lock also in mem_cgroup_oom_notify. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=80881 Fixes: fb2a6fc5 (mm: memcg: rework and document OOM waiting and wakeup) Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Paul Furtado <paulfurtado91@gmail.com> Tested-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
David Rientjes authored
commit b104a35d upstream. The page allocator relies on __GFP_WAIT to determine if ALLOC_CPUSET should be set in allocflags. ALLOC_CPUSET controls if a page allocation should be restricted only to the set of allowed cpuset mems. Transparent hugepages clears __GFP_WAIT when defrag is disabled to prevent the fault path from using memory compaction or direct reclaim. Thus, it is unfairly able to allocate outside of its cpuset mems restriction as a side-effect. This patch ensures that ALLOC_CPUSET is only cleared when the gfp mask is truly GFP_ATOMIC by verifying it is also not a thp allocation. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Alex Thorlton <athorlton@sgi.com> Tested-by:
-
Maxim Patlasov authored
commit f6789593 upstream. Under memory pressure, it is possible for dirty_thresh, calculated by global_dirty_limits() in balance_dirty_pages(), to equal zero. Then, if strictlimit is true, bdi_dirty_limits() tries to resolve the proportion: bdi_bg_thresh : bdi_thresh = background_thresh : dirty_thresh by dividing by zero. Signed-off-by:
Maxim Patlasov <mpatlasov@parallels.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Michal Hocko <mhocko@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Wu Fengguang <fengguang.wu@intel.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
James Bottomley authored
commit 89fb4cd1 upstream. Flush commands don't transfer data and thus need to be special cased in the I/O completion handler so that we can propagate errors to the block layer and filesystem. Signed-off-by:
James Bottomley <JBottomley@Parallels.com> Reported-by:
Steven Haber <steven@qumulo.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Alexandre Bounine authored
commit 0193ed82 upstream. This is a bug fix for the situation when function tsi721_desc_get() fails to obtain a free transaction descriptor. The bug usually results in a memory access crash dump when data transfer scatter-gather list has more entries than size of hardware buffer descriptors ring. This fix ensures that error is properly returned to a caller instead of an invalid entry. This patch is applicable to kernel versions starting from v3.5. Signed-off-by:
Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Stef van Os <stef.van.os@prodrive-technologies.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Eliad Peller authored
commit 8c26d458 upstream. tsc can be NULL (mac80211 currently always passes NULL), resulting in NULL-dereference. check before copying it. Signed-off-by:
Eliad Peller <eliadx.peller@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Felix Fietkau authored
commit c01fac1c upstream. If an aggregation session fails, frames still end up in the driver queue with IEEE80211_TX_CTL_AMPDU set. This causes tx for the affected station/tid to stall, since ath_tx_get_tid_subframe returning packets to send. Fix this by clearing IEEE80211_TX_CTL_AMPDU as long as no aggregation session is running. Reported-by:
Antonio Quartulli <antonio@open-mesh.com> Signed-off-by:
Felix Fietkau <nbd@openwrt.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Konstantin Khlebnikov authored
commit 811a2407 upstream. On LPAE, each level 1 (pgd) page table entry maps 1GiB, and the level 2 (pmd) entries map 2MiB. When the identity mapping is created on LPAE, the pgd pointers are copied from the swapper_pg_dir. If we find that we need to modify the contents of a pmd, we allocate a new empty pmd table and insert it into the appropriate 1GB slot, before then filling it with the identity mapping. However, if the 1GB slot covers the kernel lowmem mappings, we obliterate those mappings. When replacing a PMD, first copy the old PMD contents to the new PMD, so that we preserve the existing mappings, particularly the mappings of the kernel itself. [rewrote commit message and added code comment -- rmk] Fixes: ae2de101 ("ARM: LPAE: Add identity mapping support for the 3-level page table format") Signed-off-by:
Konstantin Khlebnikov <k.khlebnikov@samsung.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Milan Broz authored
commit 4c63f83c upstream. Th AF_ALG socket was missing a security label (e.g. SELinux) which means that socket was in "unlabeled" state. This was recently demonstrated in the cryptsetup package (cryptsetup v1.6.5 and later.) See https://bugzilla.redhat.com/show_bug.cgi?id=1115120 This patch clones the sock's label from the parent sock and resolves the issue (similar to AF_BLUETOOTH protocol family). Signed-off-by:
Milan Broz <gmazyland@gmail.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
- 30 Jul, 2014 13 commits
-
-
Martin Schwidefsky authored
commit dab6cf55 upstream. The PSW mask check of the PTRACE_POKEUSR_AREA command is incorrect. The PSW_MASK_USER define contains the PSW_MASK_ASC bits, the ptrace interface accepts all combinations for the address-space-control bits. To protect the kernel space the PSW mask check in ptrace needs to reject the address-space-control bit combination for home space. Fixes CVE-2014-3534 Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Jiri Slaby authored
-
Michael Brown authored
commit c7fb93ec upstream. The PE/COFF headers currently describe only the initialised-data portions of the image, and result in no space being allocated for the uninitialised-data portions. Consequently, the EFI boot stub will end up overwriting unexpected areas of memory, with unpredictable results. Fix by including a .bss section in the PE/COFF headers (functionally equivalent to the init_size field in the bzImage header). Signed-off-by:
Michael Brown <mbrown@fensystems.co.uk> Cc: Thomas Bächler <thomas@archlinux.org> Cc: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Linus Torvalds authored
commit 2062afb4 upstream. Michel Dänzer and a couple of other people reported inexplicable random oopses in the scheduler, and the cause turns out to be gcc mis-compiling the load_balance() function when debugging is enabled. The gcc bug apparently goes back to gcc-4.5, but slight optimization changes means that it now showed up as a problem in 4.9.0 and 4.9.1. The instruction scheduling problem causes gcc to schedule a spill operation to before the stack frame has been created, which in turn can corrupt the spilled value if an interrupt comes in. There may be other effects of this bug too, but that's the code generation problem seen in Michel's case. This is fixed in current gcc HEAD, but the workaround as suggested by Markus Trippelsdorf is pretty simple: use -fno-var-tracking-assignments when compiling the kernel, which disables the gcc code that causes the problem. This can result in slightly worse debug information for variable accesses, but that is infinitely preferable to actual code generation problems. Doing this unconditionally (not just for CONFIG_DEBUG_INFO) also allows non-debug builds to verify that the debug build would be identical: we can do export GCC_COMPARE_DEBUG=1 to make gcc internally verify that the result of the build is independent of the "-g" flag (it will make the compiler build everything twice, toggling the debug flag, and compare the results). Without the "-fno-var-tracking-assignments" option, the build would fail (even with 4.8.3 that didn't show the actual stack frame bug) with a gcc compare failure. See also gcc bugzilla: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61801Reported-by:
Michel Dänzer <michel@daenzer.net> Suggested-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Jakub Jelinek <jakub@redhat.com> Signed-off-by:
-
Christian König authored
commit e8c214d2 upstream. We must mask out the overflow bit as well, otherwise the wptr will never match the rptr again and the interrupt handler will loop forever. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
Sven Wegener authored
commit 8142b215 upstream. Commit 554086d8 ("x86_32, entry: Do syscall exit work on badsys (CVE-2014-4508)") introduced a regression in the x86_32 syscall entry code, resulting in syscall() not returning proper errors for undefined syscalls on CPUs supporting the sysenter feature. The following code: > int result = syscall(666); > printf("result=%d errno=%d error=%s\n", result, errno, strerror(errno)); results in: > result=666 errno=0 error=Success Obviously, the syscall return value is the called syscall number, but it should have been an ENOSYS error. When run under ptrace it behaves correctly, which makes it hard to debug in the wild: > result=-1 errno=38 error=Function not implemented The %eax register is the return value register. For debugging via ptrace the syscall entry code stores the complete register context on the stack. The badsys handlers only store the ENOSYS error code in the ptrace register set and do not set %eax like a regular syscall handler would. The old resume_userspace call chain contains code that clobbers %eax and it restores %eax from the ptrace registers afterwards. The same goes for the ptrace-enabled call chain. When ptrace is not used, the syscall return value is the passed-in syscall number from the untouched %eax register. Use %eax as the return value register in syscall_badsys and sysenter_badsys, like a real syscall handler does, and have the caller push the value onto the stack for ptrace access. Signed-off-by:
Sven Wegener <sven.wegener@stealer.net> Link: http://lkml.kernel.org/r/alpine.LNX.2.11.1407221022380.31021@titan.int.lan.stealer.netReviewed-and-tested-by:
-
Vasily Averin authored
commit 295dc39d upstream. Currently umount on symlink blocks following umount: /vz is separate mount # ls /vz/ -al | grep test drwxr-xr-x. 2 root root 4096 Jul 19 01:14 testdir lrwxrwxrwx. 1 root root 11 Jul 19 01:16 testlink -> /vz/testdir # umount -l /vz/testlink umount: /vz/testlink: not mounted (expected) # lsof /vz # umount /vz umount: /vz: device is busy. (unexpected) In this case mountpoint_last() gets an extra refcount on path->mnt Signed-off-by:
Vasily Averin <vvs@openvz.org> Acked-by:
Ian Kent <raven@themaw.net> Acked-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
-
Guenter Roeck authored
commit 043572d5 upstream. Temperature limit clamps are applied after converting the temperature from milli-degrees C to degrees C, so either the clamp limit needs to be specified in degrees C, not milli-degrees C, or clamping must happen before converting to degrees C. Use the latter method to avoid overflows. vrm is an u8, so the written value needs to be limited to [0, 255]. Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Jean Delvare <jdelvare@suse.de> Signed-off-by:
-
John David Anglin authored
commit 20dbea49 upstream. The sa_restorer field in struct sigaction is obsolete and no longer in the parisc implementation. However, the core code assumes the field is present if SA_RESTORER is defined. So, the define needs to be removed. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Silesh C V authored
commit aed8adb7 upstream. Commit 079148b9 ("coredump: factor out the setting of PF_DUMPCORE") cleaned up the setting of PF_DUMPCORE by removing it from all the linux_binfmt->core_dump() and moving it to zap_threads().But this ended up clearing all the previously set flags. This causes issues during core generation when tsk->flags is checked again (eg. for PF_USED_MATH to dump floating point registers). Fix this. Signed-off-by:
Silesh C V <svellattu@mvista.com> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Mandeep Singh Baines <msb@chromium.org> Signed-off-by:
-
Dmitry Torokhov authored
commit 50c5d36d upstream. We attempt to remove noise from coordinates reported by devices in input_handle_abs_event(), unfortunately, unless we were dropping the event altogether, we were ignoring the adjusted value and were passing on the original value instead. Reviewed-by:
Andrew de los Reyes <adlr@chromium.org> Reviewed-by:
Benson Leung <bleung@chromium.org> Reviewed-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Mikulas Patocka authored
commit 69461747 upstream. The patch 3e374919 is supposed to fix the problem where kmem_cache_create incorrectly reports duplicate cache name and fails. The problem is described in the header of that patch. However, the patch doesn't really fix the problem because of these reasons: * the logic to test for debugging is reversed. It was intended to perform the check only if slub debugging is enabled (which implies that caches with the same parameters are not merged). Therefore, there should be #if !defined(CONFIG_SLUB) || defined(CONFIG_SLUB_DEBUG_ON) The current code has the condition reversed and performs the test if debugging is disabled. * slub debugging may be enabled or disabled based on kernel command line, CONFIG_SLUB_DEBUG_ON is just the default settings. Therefore the test based on definition of CONFIG_SLUB_DEBUG_ON is unreliable. This patch fixes the problem by removing the test "!defined(CONFIG_SLUB_DEBUG_ON)". Therefore, duplicate names are never checked if the SLUB allocator is used. Note to stable kernel maintainers: when backporint this patch, please backport also the patch 3e374919. Acked-by:
Christoph Lameter <cl@linux.com> Signed-off-by:
Pekka Enberg <penberg@kernel.org> Signed-off-by:
-
Tony Luck authored
commit 58d4e21e upstream. The "uptime" trace clock added in: commit 8aacf017 tracing: Add "uptime" trace clock that uses jiffies has wraparound problems when the system has been up more than 1 hour 11 minutes and 34 seconds. It converts jiffies to nanoseconds using: (u64)jiffies_to_usecs(jiffy) * 1000ULL but since jiffies_to_usecs() only returns a 32-bit value, it truncates at 2^32 microseconds. An additional problem on 32-bit systems is that the argument is "unsigned long", so fixing the return value only helps until 2^32 jiffies (49.7 days on a HZ=1000 system). Avoid these problems by using jiffies_64 as our basis, and not converting to nanoseconds (we do convert to clock_t because user facing API must not be dependent on internal kernel HZ values). Link: http://lkml.kernel.org/p/99d63c5bfe9b320a3b428d773825a37095bf6a51.1405708254.git.tony.luck@intel.com Fixes: 8aacf017 "tracing: Add "uptime" trace clock that uses jiffies" Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
-
