- 23 Jan, 2024 25 commits
-
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Drop unused linux/acpi.h includes. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202312040109.Csnmqnb2-lkp@intel.com/ Closes: https://lore.kernel.org/oe-kbuild-all/202311171116.47sUbZV5-lkp@intel.com/Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20231231183514.566609-19-jic23@kernel.orgSigned-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com>
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reported-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reported-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Include linux/mod_devicetable.h which includes the definition of struct acpi_device_id (hence somewhat related to the main change) Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include from acpi.h to mod_devicetable.h which includes the definition of struct acpi_device_id. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Drop unused acpi.h include. Reported-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Cc: Mike Looijmans <mike.looijmans@topic.nl> Reviewed-by:
-
Jonathan Cameron authored
In general the complexity of avoiding maybe unused variable warnings is not worth dealing with for the small amount of data saved. In thie case, the i2c driver does include some other code under a CONFIG_ACPI guard but remove the ACPI_PTR() usage anyway to bring keep it inline with the spi driver. Drop include of linux/acpi.h in the spi driver that doesn't need it as struct acpi_device_id is defined in mod_devicetable.h which is already included. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reported-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Switch include to mod_devicetable.h as that contains the only ACPI specific definitions needed in this driver. Reported-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Whilst here tidy up a trivial bit of unusual indentation. Reviewed-by:
-
Jonathan Cameron authored
Avoiding unused variable warnings when using this macro adds complexity that in simple cases like this one is not justified for the small saving in data. Whilst here tidy up a trivial bit of unusual indentation. Reviewed-by:
-
Jonathan Cameron authored
This avoids a build warning due to the use of ACPI_PTR(). Given the driver already has APCI specific code under CONFIG_ACPI move the table rather than removing the ACPI_PTR() call as we already have the complexity of CONFIG_ACPI. Dropped a pointless comma after {} terminator whilst moving the code. Cc: Hans de Goede <hdegoede@redhat.com> Reviewed-by:Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Jonathan Cameron authored
In general using ACPI_PTR() leads to more fragile code for a very minor saving in storage in the case of !CONFIG_ACPI so in IIO we prefer not to use it if the only ACPI specific code is the acpi_device_id table. In this case will also suppress a unused variable warning. Reported-by:
-
Petre Rodan authored
Add SPI component of the driver. Tested-by:
Andreas Klinger <ak@it-klinger.de> Signed-off-by:
Petre Rodan <petre.rodan@subdimension.ro> Link: https://lore.kernel.org/r/20231229092445.30180-11-petre.rodan@subdimension.roSigned-off-by:
-
Petre Rodan authored
Add honeywell,pressure-triplet property that automatically initializes pmin-pascal, pmax-pascal so that the user is not required to look-up the chip in the datasheet and convert various units to pascals himself. Co-developed-by:
-
Petre Rodan authored
Refactor driver by splitting the code into core and i2c. Seemingly redundant read/write function parameters are required for compatibility with the SPI driver. Co-developed-by:
-
Petre Rodan authored
Fix indentation and whitespace in code that will not get refactored. Make URL inside comment copy-paste friendly. Co-developed-by:
-
Petre Rodan authored
This driver supports 32*3 combinations of fixed ranges and transfer functions, plus custom ranges. So statistically a user has more than 99% chance that the provided default configuration will generate invalid pressure readings if the bindings are not initialized and the driver is instantiated via sysfs. The current patch removes this loophole making sure the driver loads only if the firmware properties are present. Co-developed-by:
-
Petre Rodan authored
Improve driver error resilience by ignoring the measurement if any of the 3 error flags gets set while interacting with the sensor. Based on the datasheet, in table 14 on page 14, the status byte contains: bit 5 busy flag - 1 if device is busy bit 2 memory integrity/error flag - 1 if integrity test failed bit 0 math saturation - 1 if internal math saturation has occurred Co-developed-by: -
Petre Rodan authored
Fix off-by-one error in transfer-function property. The honeywell,transfer-function property takes values between 1-3 so make sure the proper enum gets used. Fixes: 713337d9 ("iio: pressure: Honeywell mprls0025pa pressure sensor") Co-developed-by:
-
- 22 Jan, 2024 8 commits
-
-
Petre Rodan authored
Add spi based example. Add spi-max-frequency property required by chip specifications. Add additional maintainer. Co-developed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20231229092445.30180-4-petre.rodan@subdimension.roSigned-off-by:
-
Petre Rodan authored
Change order of properties in order for the end user to hopefully ignore pmin-pascal and pmax-pascal which are superseded by pressure-triplet. Add pressure-triplet property which automatically initializes pmin-pascal and pmax-pascal inside the driver. Rework honeywell,pmXX-pascal requirements based on feedback from Jonathan and Conor. Co-developed-by:
-
Petre Rodan authored
Define enum inside the honeywell,transfer-function property block. Set the correct irq edge in the example block. Based on the datasheet, in table 13 on page 11: "End-of-conversion indicator: This pin is set high when a measurement and calculation have been completed and the data is ready to be clocked out" Add description on End-of-conversion interrupt. Acked-by:
-
Mohammed Billoo authored
The devicetree binding and datasheets (for both the ADS1015 and ADS1115) show that the PGA index should have a maximum value of 5, and not 6. Signed-off-by:
Mohammed Billoo <mab.kernel@gmail.com> Link: https://lore.kernel.org/r/20240106174836.1086714-1-mab.kernel@gmail.comSigned-off-by:
-
Hans de Goede authored
da280_match_acpi_device() is a DIY version of acpi_device_get_match_data(), so it can be dropped. And things can be simplified further by using i2c_get_match_data() which will also check i2c_client_id style ids. Signed-off-by:
-
Javier Carrasco authored
The AMS AS7331 is a UV light sensor with three channels: UVA, UVB and UVC (also known as deep UV and referenced as DUV in the iio core). Its internal structure and forming blocks are practically identical to the ones the AS73211 contains: API, internal DAC, I2C interface and registers, measurement modes, number of channels and pinout. The only difference between them is the photodiodes used to acquire light, which means that only some modifications are required to add support for the AS7331 in the existing driver. The temperature channel is identical for both devices and only the channel modifiers of the IIO_INTENSITY channels need to account for the device type. The scale values have been obtained from the chapter "7.5 Transfer Function" of the official datasheet[1] for the configuration chosen as basis (Nclk = 1024 and GAIN = 1). Those values keep the units from the datasheet (nW/cm^2), as opposed to the units used for the AS73211 (nW/m^2). Add a new device-specific data structure to account for the device differences: channel types and scale of LSB per channel. [1] https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdfTested-by:
Christian Eggers <ceggers@arri.de> Signed-off-by:
Javier Carrasco <javier.carrasco.cruz@gmail.com> Signed-off-by:
-
Javier Carrasco authored
This device has the same properties and I2C addresses as the as73211. The only difference between them is the photodiodes they use internally, which in this case is irrelevant for the bindings. Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Javier Carrasco authored
The scale values associated to the light channels are calculated as a division that can be better expressed as an IIO_VAL_FRACTIONAL type instead of the current IIO_VAL_INT. Note that the constant values used for the calculation were scaled up to work with integers, turning the nW/cm^2 units from the datasheet into nW/m^2, which would not be necessary with the IIO_VAL_FRACTIONAL type. But to avoid issues from current users of the driver, the units must be kept. Signed-off-by:
-
- 21 Jan, 2024 7 commits
-
-
Linus Torvalds authored
-
https://evilpiepirate.org/git/bcachefsLinus Torvalds authored
Pull more bcachefs updates from Kent Overstreet: "Some fixes, Some refactoring, some minor features: - Assorted prep work for disk space accounting rewrite - BTREE_TRIGGER_ATOMIC: after combining our trigger callbacks, this makes our trigger context more explicit - A few fixes to avoid excessive transaction restarts on multithreaded workloads: fstests (in addition to ktest tests) are now checking slowpath counters, and that's shaking out a few bugs - Assorted tracepoint improvements - Starting to break up bcachefs_format.h and move on disk types so they're with the code they belong to; this will make room to start documenting the on disk format better. - A few minor fixes" * tag 'bcachefs-2024-01-21' of https://evilpiepirate.org/git/bcachefs: (46 commits) bcachefs: Improve inode_to_text() bcachefs: logged_ops_format.h bcachefs: reflink_format.h bcachefs; extents_format.h bcachefs: ec_format.h bcachefs: subvolume_format.h bcachefs: snapshot_format.h bcachefs: alloc_background_format.h bcachefs: xattr_format.h bcachefs: dirent_format.h bcachefs: inode_format.h bcachefs; quota_format.h bcachefs: sb-counters_format.h bcachefs: counters.c -> sb-counters.c bcachefs: comment bch_subvolume bcachefs: bch_snapshot::btime bcachefs: add missing __GFP_NOWARN bcachefs: opts->compression can now also be applied in the background bcachefs: Prep work for variable size btree node buffers bcachefs: grab s_umount only if snapshotting ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Updates for time and clocksources: - A fix for the idle and iowait time accounting vs CPU hotplug. The time is reset on CPU hotplug which makes the accumulated systemwide time jump backwards. - Assorted fixes and improvements for clocksource/event drivers" * tag 'timers-core-2024-01-21' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug clocksource/drivers/ep93xx: Fix error handling during probe clocksource/drivers/cadence-ttc: Fix some kernel-doc warnings clocksource/drivers/timer-ti-dm: Fix make W=n kerneldoc warnings clocksource/timer-riscv: Add riscv_clock_shutdown callback dt-bindings: timer: Add StarFive JH8100 clint dt-bindings: timer: thead,c900-aclint-mtimer: separate mtime and mtimecmp regs -
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Aneesh Kumar: - Increase default stack size to 32KB for Book3S Thanks to Michael Ellerman. * tag 'powerpc-6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/64s: Increase default stack size to 32KB
-
Kent Overstreet authored
Add line breaks - inode_to_text() is now much easier to read. Signed-off-by:Kent Overstreet <kent.overstreet@linux.dev>
-
Kent Overstreet authored
Signed-off-by: -
Kent Overstreet authored
Signed-off-by:
-
