Skip to content

L
linux
Switch branch/tag
  1. 17 Aug, 2015 3 commits
    • Wang YanQing's avatar
      time: Always make sure wall_to_monotonic isn't positive · e1d7ba87
      Wang YanQing authored 
      Two issues were found on an IMX6 development board without an
enabled RTC device(resulting in the boot time and monotonic
time being initialized to 0).

Issue 1:exportfs -a generate:
       "exportfs: /opt/nfs/arm does not support NFS export"
Issue 2:cat /proc/stat:
       "btime 4294967236"

The same issues can be reproduced on x86 after running the
following code:
	int main(void)
	{
	    struct timeval val;
	    int ret;

	    val.tv_sec = 0;
	    val.tv_usec = 0;
	    ret = settimeofday(&val, NULL);
	    return 0;
	}

Two issues are different symptoms of same problem:
The reason is a positive wall_to_monotonic pushes boot time back
to the time before Epoch, and getboottime will return negative
value.

In symptom 1:
          negative boot time cause get_expiry() to overflow time_t
          when input expire time is 2147483647, then cache_flush()
          always clears entries just added in ip_map_parse.
In symptom 2:
          show_stat() uses "unsigned long" to print negative btime
          value returned by getboottime.

This patch fix the problem by prohibiting time from being set to a value which
would cause a negative boot time. As a result one can't set the CLOCK_REALTIME
time prior to (1970 + system uptime).

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarWang YanQing <udknight@gmail.com>
[jstultz: reworded commit message]
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
      e1d7ba87
    • Karsten Blees's avatar
      time: Fix nanosecond file time rounding in timespec_trunc() · de4a95fa
      Karsten Blees authored 
      timespec_trunc() avoids rounding if granularity <= nanoseconds-per-jiffie
(or TICK_NSEC). This optimization assumes that:

 1. current_kernel_time().tv_nsec is already rounded to TICK_NSEC (i.e.
    with HZ=1000 you'd get 1000000, 2000000, 3000000... but never 1000001).
    This is no longer true (probably since hrtimers introduced in 2.6.16).

 2. TICK_NSEC is evenly divisible by all possible granularities. This may
    be true for HZ=100, 250, 1000, but obviously not for HZ=300 /
    TICK_NSEC=3333333 (introduced in 2.6.20).

Thus, sub-second portions of in-core file times are not rounded to on-disk
granularity. I.e. file times may change when the inode is re-read from disk
or when the file system is remounted.

This affects all file systems with file time granularities > 1 ns and < 1s,
e.g. CEPH (1000 ns), UDF (1000 ns), CIFS (100 ns), NTFS (100 ns) and FUSE
(configurable from user mode via struct fuse_init_out.time_gran).

Steps to reproduce with e.g. UDF:

  $ dd if=/dev/zero of=udfdisk count=10000 && mkudffs udfdisk
  $ mkdir udf && mount udfdisk udf
  $ touch udf/test && stat -c %y udf/test
  2015-06-09 10:22:56.130006767 +0200
  $ umount udf && mount udfdisk udf
  $ stat -c %y udf/test
  2015-06-09 10:22:56.130006000 +0200

Remounting truncates the mtime to 1 µs.

Fix the rounding in timespec_trunc() and update the documentation.

timespec_trunc() is exclusively used to calculate inode's [acm]time (mostly
via current_fs_time()), and always with super_block.s_time_gran as second
argument. So this can safely be changed without side effects.

Note: This does _not_ fix the issue for FAT's 2 second mtime resolution,
as super_block.s_time_gran isn't prepared to handle different ctime /
mtime / atime resolutions nor resolutions > 1 second.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: default avatarKarsten Blees <blees@dcon.de>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
      de4a95fa
    • John Stultz's avatar
      timer_list: Add the base offset so remaining nsecs are accurate for non monotonic timers · 38bf985b
      John Stultz authored 
      I noticed for non-monotonic timers in timer_list, some of the
output looked a little confusing.

For example:
 #1: <0000000000000000>, posix_timer_fn, S:01, hrtimer_start_range_ns, leap-a-day/2360
 # expires at 1434412800000000000-1434412800000000000 nsecs [in 1434410725062375469 to 1434410725062375469 nsecs]

You'll note the relative time till the expiration "[in xxx to
yyy nsecs]" is incorrect. This is because its printing the delta
between CLOCK_MONOTONIC time to the CLOCK_REALTIME expiration.

This patch fixes this issue by adding the clock offset to the
"now" time which we use to calculate the delta.

Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: Richard Cochran <richardcochran@gmail.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jiri Bohac <jbohac@suse.cz>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: default avatarJohn Stultz <john.stultz@linaro.org>
      38bf985b
  3. 05 Jul, 2015 4 commits
    • Linus Torvalds's avatar
      Linux 4.2-rc1 · d770e558
      Linus Torvalds authored
      d770e558
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v4.2-2' of... · a585d2b7
      Linus Torvalds authored 
      Merge tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86

Pull late x86 platform driver updates from Darren Hart:
 "The following came in a bit later and I wanted them to bake in next a
  few more days before submitting, thus the second pull.

  A new intel_pmc_ipc driver, a symmetrical allocation and free fix in
  dell-laptop, a couple minor fixes, and some updated documentation in
  the dell-laptop comments.

  intel_pmc_ipc:
   - Add Intel Apollo Lake PMC IPC driver

  tc1100-wmi:
   - Delete an unnecessary check before the function call "kfree"

  dell-laptop:
   - Fix allocating & freeing SMI buffer page
   - Show info about WiGig and UWB in debugfs
   - Update information about wireless control"

* tag 'platform-drivers-x86-v4.2-2' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
  intel_pmc_ipc: Add Intel Apollo Lake PMC IPC driver
  tc1100-wmi: Delete an unnecessary check before the function call "kfree"
  dell-laptop: Fix allocating & freeing SMI buffer page
  dell-laptop: Show info about WiGig and UWB in debugfs
  dell-laptop: Update information about wireless control
      a585d2b7
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 1dc51b82
      Linus Torvalds authored 
      Pull more vfs updates from Al Viro:
 "Assorted VFS fixes and related cleanups (IMO the most interesting in
  that part are f_path-related things and Eric's descriptor-related
  stuff).  UFS regression fixes (it got broken last cycle).  9P fixes.
  fs-cache series, DAX patches, Jan's file_remove_suid() work"

[ I'd say this is much more than "fixes and related cleanups".  The
  file_table locking rule change by Eric Dumazet is a rather big and
  fundamental update even if the patch isn't huge.   - Linus ]

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
  9p: cope with bogus responses from server in p9_client_{read,write}
  p9_client_write(): avoid double p9_free_req()
  9p: forgetting to cancel request on interrupted zero-copy RPC
  dax: bdev_direct_access() may sleep
  block: Add support for DAX reads/writes to block devices
  dax: Use copy_from_iter_nocache
  dax: Add block size note to documentation
  fs/file.c: __fget() and dup2() atomicity rules
  fs/file.c: don't acquire files->file_lock in fd_install()
  fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
  vfs: avoid creation of inode number 0 in get_next_ino
  namei: make set_root_rcu() return void
  make simple_positive() public
  ufs: use dir_pages instead of ufs_dir_pages()
  pagemap.h: move dir_pages() over there
  remove the pointless include of lglock.h
  fs: cleanup slight list_entry abuse
  xfs: Correctly lock inode when removing suid and file capabilities
  fs: Call security_ops->inode_killpriv on truncate
  fs: Provide function telling whether file_remove_privs() will do anything
  ...
      1dc51b82
    • Linus Torvalds's avatar
      bluetooth: fix list handling · 9b284cbd
      Linus Torvalds authored 
      Commit 835a6a2f ("Bluetooth: Stop sabotaging list poisoning")
thought that the code was sabotaging the list poisoning when NULL'ing
out the list pointers and removed it.

But what was going on was that the bluetooth code was using NULL
pointers for the list as a way to mark it empty, and that commit just
broke it (and replaced the test with NULL with a "list_empty()" test on
a uninitialized list instead, breaking things even further).

So fix it all up to use the regular and real list_empty() handling
(which does not use NULL, but a pointer to itself), also making sure to
initialize the list properly (the previous NULL case was initialized
implicitly by the session being allocated with kzalloc())

This is a combination of patches by Marcel Holtmann and Tedd Ho-Jeong
An.

[ I would normally expect to get this through the bt tree, but I'm going
  to release -rc1, so I'm just committing this directly   - Linus ]
Reported-and-tested-by: default avatarJörg Otte <jrg.otte@gmail.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Original-by: default avatarTedd Ho-Jeong An <tedd.an@intel.com>
Original-by: Marcel Holtmann <marcel@holtmann.org>:
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      9b284cbd
  5. 04 Jul, 2015 33 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7