- 29 Aug, 2014 20 commits
-
-
Pranith Kumar authored
Fix building errors occuring due to a missing export of flush_icache_range() in kisskb.ellerman.id.au/kisskb/buildresult/11677809/ ERROR: "flush_icache_range" [drivers/misc/lkdtm.ko] undefined! Signed-off-by:
Pranith Kumar <bobby.prani@gmail.com> Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> [xtensa] Cc: Noam Camus <noamc@ezchip.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Acked-by: Zhigang Lu <zlu@tilera.com> [tile] Cc: Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Phong Tran authored
Fix the typo of ARCH when running 'make kselftests'. Change the 'X86' to 'x86'. Test by compilation. Signed-off-by:
Phong Tran <tranmanphong@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Cc: Hugh Dickins <hughd@google.com> Cc: Shuah Khan <shuah.kh@samsung.com> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Michal Marek <mmarek@suse.cz> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Junxiao Bi authored
For debug use, we can see from the log whether the fence decision is made and why it is not fenced. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Reviewed-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Reviewed-by:
Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Cc: Joseph Qi <joseph.qi@huawei.com> Signed-off-by:
-
Junxiao Bi authored
When tcp retransmit timeout(15mins), the connection will be closed. Pending messages may be lost during this time. So we set tcp user timeout to override the retransmit timeout to the max value. This is OK for ocfs2 since we have disk heartbeat, if peer crash, the disk heartbeat will timeout and it will be evicted, if disk heartbeat not timeout and connection idle for a long time, then this means the cluster enters split-brain state, since fence can't happen, we'd better keep the connection and wait network recover. Signed-off-by:
-
Junxiao Bi authored
This patch series is to fix a possible message lost bug in ocfs2 when network go bad. This bug will cause ocfs2 hung forever even network become good again. The messages may lost in this case. After the tcp connection is established between two nodes, an idle timer will be set to check its state periodically, if no messages are received during this time, idle timer will timeout, it will shutdown the connection and try to reconnect, so pending messages in tcp queues will be lost. This messages may be from dlm. Dlm may get hung in this case. This may cause the whole ocfs2 cluster hung. This is very possible to happen when network state goes bad. Do the reconnect is useless, it will fail if network state is still bad. Just waiting there for network recovering may be a good idea, it will not lost messages and some node will be fenced until cluster goes into split-brain state, for this case, Tcp user timeout is used to override the tcp retransmit timeout. It will timeout after 25 days, user should have notice this through the provided log and fix the network, if they don't, ocfs2 will fall back to original reconnect way. This patch (of 3): Some messages in the tcp queue maybe lost if we shutdown the connection and reconnect when idle timeout. If packets lost and reconnect success, then the ocfs2 cluster maybe hung. To fix this, we can leave the connection there and do the fence decision when idle timeout, if network recover before fence dicision is made, the connection survive without lost any messages. This bug can be saw when network state go bad. It may cause ocfs2 hung forever if some packets lost. With this fix, ocfs2 will recover from hung if network becomes good again. Signed-off-by:
-
Ben Hutchings authored
If we failed to copy from the structure, writing back the flags leaks 31 bits of kernel memory (the rest of the ir_flags field). In any case, if we cannot copy from/to the structure, why should we expect putting just the flags to work? Also make sure ocfs2_info_handle_freeinode() returns the right error code if the copy_to_user() fails. Fixes: ddee5cdb ('Ocfs2: Add new OCFS2_IOC_INFO ioctl for ocfs2 v8.') Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Cc: Joel Becker <jlbec@evilplan.org> Acked-by:
Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Vivek Goyal authored
Thomas reported that build of x86_64 kernel was failing for him. He is using 32bit tool chain. Problem is that while compiling purgatory, I have not specified -m64 flag. And 32bit tool chain must be assuming -m32 by default. Following is error message. (mini) [~/work/linux-2.6] make scripts/kconfig/conf --silentoldconfig Kconfig CHK include/config/kernel.release UPD include/config/kernel.release CHK include/generated/uapi/linux/version.h CHK include/generated/utsrelease.h UPD include/generated/utsrelease.h CC arch/x86/purgatory/purgatory.o arch/x86/purgatory/purgatory.c:1:0: error: code model 'large' not supported in the 32 bit mode Fix it by explicitly passing appropriate -m64/-m32 build flag for purgatory. Reported-by:
Thomas Glanzmann <thomas@glanzmann.de> Tested-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
-
Bartlomiej Zolnierkiewicz authored
The rtc-s5m driver used to support devices without irq specified in the past. Re-add this support. The patch fixes boot for Insignal's Exynos4412 based Origen board. Error messages before the patch: ... Unable to handle kernel NULL pointer dereference at virtual address 00000094 pgd = c0004000 [00000094] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.16.0-next-20140804-00008-ga59480f-dirty #701 task: ea80f000 ti: ea882000 task.ti: ea882000 PC is at regmap_irq_get_virq+0x0/0x28 LR is at s5m_rtc_probe+0xdc/0x310 pc : [<c02574fc>] lr : [<c02de75c>] psr: 80000153 sp : ea883e48 ip : 00000000 fp : 00000000 r10: 0000000c r9 : c05de7ac r8 : eaabc600 r7 : eaa6b4d0 r6 : c0439e8c r5 : eaabc610 r4 : eab30e50 r3 : 00000000 r2 : 00000000 r1 : 0000000c r0 : 00000000 Flags: Nzcv IRQs on FIQs off Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 4000404a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xea882240) Backtrace: regmap_irq_get_virq s5m_rtc_probe platform_drv_probe driver_probe_device __driver_attach bus_for_each_dev bus_add_driver driver_register do_one_initcall kernel_init_freeable kernel_init ---[ end trace a954d7f019122700 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b ... Signed-off-by:Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Filipe Brandenburger authored
The guard was introduced in commit ea1a8217 ("xattr: guard against simultaneous glibc header inclusion") but it is using #ifdef to check for a define that is either set to 1 or 0. Fix it to use #if instead. * Without this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null include/uapi/linux/xattr.h:19:0: warning: "XATTR_CREATE" redefined [enabled by default] #define XATTR_CREATE 0x1 /* set value, fail if attr already exists */ ^ /usr/include/x86_64-linux-gnu/sys/xattr.h:32:0: note: this is the location of the previous definition #define XATTR_CREATE XATTR_CREATE ^ * With this patch: $ { echo "#include <sys/xattr.h>"; echo "#include <linux/xattr.h>"; } | gcc -E -Iinclude/uapi - >/dev/null (no warnings) Signed-off-by:
Filipe Brandenburger <filbranden@google.com> Acked-by:
Serge E. Hallyn <serge.hallyn@ubuntu.com> Cc: Allan McRae <allan@archlinux.org> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Vivek Goyal authored
New system call depends on crypto. As it did not have a separate config option, CONFIG_KEXEC was modified to select CRYPTO and CRYPTO_SHA256. But now previous patch introduced a new config option for new syscall. So CONFIG_KEXEC does not require crypto. Remove that dependency. Signed-off-by:
-
Vivek Goyal authored
Currently new system call kexec_file_load() and all the associated code compiles if CONFIG_KEXEC=y. But new syscall also compiles purgatory code which currently uses gcc option -mcmodel=large. This option seems to be available only gcc 4.4 onwards. Hiding new functionality behind a new config option will not break existing users of old gcc. Those who wish to enable new functionality will require new gcc. Having said that, I am trying to figure out how can I move away from using -mcmodel=large but that can take a while. I think there are other advantages of introducing this new config option. As this option will be enabled only on x86_64, other arches don't have to compile generic kexec code which will never be used. This new code selects CRYPTO=y and CRYPTO_SHA256=y. And all other arches had to do this for CONFIG_KEXEC. Now with introduction of new config option, we can remove crypto dependency from other arches. Now CONFIG_KEXEC_FILE is available only on x86_64. So whereever I had CONFIG_X86_64 defined, I got rid of that. For CONFIG_KEXEC_FILE, instead of doing select CRYPTO=y, I changed it to "depends on CRYPTO=y". This should be safer as "select" is not recursive. Signed-off-by:
Shaun Ruffell <sruffell@digium.com> Signed-off-by:
-
Hugh Dickins authored
Sasha Levin has shown oopses on ffffea0003480048 and ffffea0003480008 at mm/memory.c:1132, running Trinity on different 3.16-rc-next kernels: where zap_pte_range() checks page->mapping to see if PageAnon(page). Those addresses fit struct pages for pfns d2001 and d2000, and in each dump a register or a stack slot showed d2001730 or d2000730: pte flags 0x730 are PCD ACCESSED PROTNONE SPECIAL IOMAP; and Sasha's e820 map has a hole between cfffffff and 100000000, which would need special access. Commit c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") has broken vm_normal_page(): a PROTNONE SPECIAL pte no longer passes the pte_special() test, so zap_pte_range() goes on to try to access a non-existent struct page. Fix this by refining pte_special() (SPECIAL with PRESENT or PROTNONE) to complement pte_numa() (SPECIAL with neither PRESENT nor PROTNONE). A hint that this was a problem was that c46a7c81 added pte_numa() test to vm_normal_page(), and moved its is_zero_pfn() test from slow to fast path: This was papering over a pte_special() snag when the zero page was encountered during zap. This patch reverts vm_normal_page() to how it was before, relying on pte_special(). It still appears that this patch may be incomplete: aren't there other places which need to be handling PROTNONE along with PRESENT? For example, pte_mknuma() clears _PAGE_PRESENT and sets _PAGE_NUMA, but on a PROT_NONE area, that would make it pte_special(). This is side-stepped by the fact that NUMA hinting faults skipped PROT_NONE VMAs and there are no grounds where a NUMA hinting fault on a PROT_NONE VMA would be interesting. Fixes: c46a7c81 ("x86: define _PAGE_NUMA by reusing software bits on the PMD and PTE levels") Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
Hugh Dickins <hughd@google.com> Signed-off-by:
Mel Gorman <mgorman@suse.de> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: Matthew Wilcox <matthew.r.wilcox@intel.com> Cc: <stable@vger.kernel.org> [3.16] Signed-off-by:
-
Michal Hocko authored
spin_lock may be an empty struct for !SMP configurations and so arch_spin_is_locked may return unconditional 0 and trigger the VM_BUG_ON even when the lock is held. Replace spin_is_locked by lockdep_assert_held. We will not BUG anymore but it is questionable whether crashing makes a lot of sense in the uncharge path. Uncharge happens after the last page reference was released so nobody should touch the page and the function doesn't update any shared state except for res counter which uses synchronization of its own. Signed-off-by:
Michal Hocko <mhocko@suse.cz> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Kees Cook authored
To avoid potential format string expansion via module parameters, do not use the zpool type directly in request_module() without a format string. Additionally, to avoid arbitrary modules being loaded via zpool API (e.g. via the zswap_zpool_type module parameter) add a "zpool-" prefix to the requested module, as well as module aliases for the existing zpool types (zbud and zsmalloc). Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Seth Jennings <sjennings@variantweb.net> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by:
Dan Streetman <ddstreet@ieee.org> Signed-off-by:
-
Chao Yu authored
Since we allocate a temporary buffer in zram_bvec_read to handle partial page operations in commit 924bd88d ("Staging: zram: allow partial page operations"), our ->failed_reads value may be incorrect as we do not increase its value when failing to allocate the temporary buffer. Let's fix this issue and correct the annotation of failed_reads. Signed-off-by:
Chao Yu <chao2.yu@samsung.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Acked-by:
Jerome Marchand <jmarchan@redhat.com> Acked-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by:
-
Dave Jones authored
I was puzzled why /proc/$$/stack had disappeared, until I figured out I had disabled the last debug option that did a 'select STACKTRACE'. This patch makes the option show up at config time, so it can be enabled without enabling any of the more heavyweight debug options. Signed-off-by:
Dave Jones <davej@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Matthew Wilcox authored
Commit 67f87463 ("mm: clear pmd_numa before invalidating") cleared the NUMA bit in a copy of the PMD entry, but then wrote back the original Signed-off-by:
Matthew Wilcox <matthew.r.wilcox@intel.com> Acked-by:
Rik van Riel <riel@redhat.com> Signed-off-by:
-
Tang Chen authored
In memblock_find_in_range_node(), we defined ret as int. But it should be phys_addr_t because it is used to store the return value from __memblock_find_range_bottom_up(). The bug has not been triggered because when allocating low memory near the kernel end, the "int ret" won't turn out to be negative. When we started to allocate memory on other nodes, and the "int ret" could be minus. Then the kernel will panic. A simple way to reproduce this: comment out the following code in numa_init(), memblock_set_bottom_up(false); and the kernel won't boot. Reported-by:Xishi Qiu <qiuxishi@huawei.com> Signed-off-by:
Tang Chen <tangchen@cn.fujitsu.com> Tested-by:
-
Vivek Goyal authored
Richard and Daniel reported that UML is broken due to changes to resource traversal functions. Problem is that iomem_resource.child can be null and new code does not consider that possibility. Old code used a for loop and that loop will not even execute if p was null. Revert back to for() loop logic and bail out if p is null. I also moved sibling_only check out of resource_lock. There is no reason to keep it inside the lock. Following is backtrace of the UML crash. RIP: 0033:[<0000000060039b9f>] RSP: 0000000081459da0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 00000000219b3fff RCX: 000000006010d1d9 RDX: 0000000000000001 RSI: 00000000602dfb94 RDI: 0000000081459df8 RBP: 0000000081459de0 R08: 00000000601b59f4 R09: ffffffff0000ff00 R10: ffffffff0000ff00 R11: 0000000081459e88 R12: 0000000081459df8 R13: 00000000219b3fff R14: 00000000602dfb94 R15: 0000000000000000 Kernel panic - not syncing: Segfault with no mm CPU: 0 PID: 1 Comm: swapper Not tainted 3.16.0-10454-g58d08e3b #13 Stack: 00000000 000080d0 81459df0 219b3fff 81459e70 6010d1d9 ffffffff 6033e010 81459e50 6003a269 81459e30 00000000 Call Trace: [<6010d1d9>] ? kclist_add_private+0x0/0xe7 [<6003a269>] walk_system_ram_range+0x61/0xb7 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6010d574>] kcore_update_ram+0x4c/0x168 [<6010d72e>] ? kclist_add+0x0/0x2e [<6000e943>] proc_kcore_init+0xea/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<6000e859>] ? proc_kcore_init+0x0/0xf1 [<600189f0>] do_one_initcall+0x13c/0x204 [<6004ca46>] ? parse_args+0x1df/0x2e0 [<6004c82d>] ? parameq+0x0/0x3a [<601b5990>] ? strcpy+0x0/0x18 [<60001e1a>] kernel_init_freeable+0x240/0x31e [<6026f1c0>] kernel_init+0x12/0x148 [<60019fad>] new_thread_handler+0x81/0xa3 Fixes 8c86e70a ("resource: provide new functions to walk through resources"). Reported-by:
Daniel Walter <sahne@0x90.at> Tested-by:
Richard Weinberger <richard@nod.at> Tested-by:
Toralf Förster <toralf.foerster@gmx.de> Tested-by:
-
Joe Perches authored
Checkpatch currently warns if a git commit ID (in the changelog, usually) is less than 12 characters or more than 16. The "more than 16" is excessive. Change the check so we accept IDs from 12 to 40 chars in length. Cc: Geert Uytterhoeven <geert@linux-m68k.org Signed-off-by:
-
- 28 Aug, 2014 18 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlightLinus Torvalds authored
Pull backlight fix from Lee Jones: "One simple fix to invalidate GPIO non-request" * tag 'backlight-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: pwm-backlight: Fix bogus request for GPIO#0 when instantiated from DT
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfdLinus Torvalds authored
Pull mfd fixes from Lee Jones: "Couple of simple fixes due for the 3.17 rcs (and a sneaky document addition that slipped from the previous pull-request)" * tag 'mfd-fixes-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators mfd: tc3589x: Add device tree bindings mfd: ab8500-core: Use 'ifdef' for config options mfd: htc-i2cpld: Fix %d confusingly prefixed with 0x in format string mfd: omap-usb-host: Fix %d confusingly prefixed with 0x in format string
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin-control fixes from Linus Walleij: "My first (a bit delayed) pack of pin control fixes for the v3.17 series, only driver fixes: - SH-PFC (Renesas) r8a7791 CAN bus pin group problem - Rockchip (GPIO0 configuration) - Tegra-xusb (interrupt handling) - Exynos (GPIO interrupt locking) - Qualcomm (fix misleading example interrupts) - minor non-critical fixes for abx500 and AT91 also sneaked in, because I initially intended this pull for post RC-1, hope it's still OK" * tag 'pinctrl-v3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: apq8064: Correct interrupts in example pinctrl: exynos: Lock GPIOs as interrupts when used as EINTs pinctrl: pinctrl-at91.c: fix decimal printf format specifiers prefixed with 0x pinctrl: abx500: remove useless check pinctrl: tegra-xusb: testing wrong variable in probe() pinctrl: tegra-xusb: fix an off by one test pinctrl: rockchip: fix rk3288 gpio0 configuration sh-pfc: r8a7791: fix CAN pin groups -
git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-bufLinus Torvalds authored
Pull dma-buf fixes from Sumit Semwal: "The major changes for 3.17 already went via Greg-KH's tree this time as well; this is a small pull request for dma-buf - all documentation related" * tag 'for-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/sumits/dma-buf: dma-buf/fence: Fix one more kerneldoc warning dma-buf/fence: Fix a kerneldoc warning Documentation/dma-buf-sharing.txt: update API descriptions
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Here contains not many exciting changes but just a few minor ones: An off-by-one proc write fix, a couple of trivial incldue guard fixes, Acer laptop pinconfig fix, and a fix for DSD formats that are still rarely used" * tag 'sound-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Set up initial pins for Acer Aspire V5 ALSA: pcm: Fix the silence data for DSD formats ALSA: ctxfi: ct20k1reg: Fix typo in include guard ALSA: hda: ca0132_regs.h: Fix typo in include guard ALSA: core: fix buffer overflow in snd_info_get_line()
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Nothing major, one core oops fixes, some radeon oops fixes, some sti driver fixups, msm driver fixes and a minor Kconfig update for the ww mutex debugging" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/ast: Add missing entry to dclk_table[] drm: fix division-by-zero on dumb_create() ww-mutex: clarify help text for DEBUG_WW_MUTEX_SLOWPATH radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
-
Tony Lindgren authored
Commit 43fef47f (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) added support for configuring the PMIC to cut off resources during deeper idle states to save power. This however caused regression for n900 display power that needed the PMIC configuration to be disabled with commit d937678a (ARM: dts: Revert enabling of twl configuration for n900). Turns out the root cause of the problem is that we must use TWL4030_RESCONFIG_UNDEF instead of DEV_GRP_NULL to avoid disabling regulators that may have been enabled before the init function for twl4030-power.c runs. With TWL4030_RESCONFIG_UNDEF we let the regulator framework control the regulators like it should. Here we need to only configure the sys_clken and sys_off_mode triggers for the regulators that cannot be done by the regulator framework as it's not running at that point. This allows us to enable the PMIC configuration for n900. Fixes: 43fef47f (mfd: twl4030-power: Add a configuration to turn off oscillator during off-idle) Cc: stable@vger.kernel.org # v3.16 Signed-off-by:
Tony Lindgren <tony@atomide.com> Tested-by:
Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by:
Lee Jones <lee.jones@linaro.org>
-
Linus Walleij authored
This defines the device tree bindings for the Toshiba TC3589x series of multi-purpose expanders. Only the stuff I can test is defined: GPIO and keypad. Others may implement more subdevices further down the road. This is to complement commit a435ae1d "mfd: Enable the tc3589x for Device Tree" which left off the definition of the device tree bindings. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Thierry Reding authored
The seqno_fence_init() function's cond argument isn't described in the kerneldoc comment. Fix that to silence a warning when building DocBook documentation. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org>
-
Thierry Reding authored
kerneldoc doesn't know how to parse variables, so don't let it try. Signed-off-by:
-
Gioh Kim authored
Update some descriptions for API arguments and descriptions. Signed-off-by:
Gioh Kim <gioh.kim@lge.com> Signed-off-by:
-
Y.C. Chen authored
This avoid reading past the end of the list for certain modes Signed-off-by:
Y.C. Chen <yc_chen@aspeedtech.com> Reviewed-by:
Egbert Eich <eich@freedesktop.org> Signed-off-by:
Dave Airlie <airlied@redhat.com>
-
Dave Airlie authored
Merge branch 'drm-3.17-rc2-sti-fixes' of git://git.linaro.org/people/benjamin.gaignard/kernel into drm-fixes I have tested the 6 patches send on mailing list since you merge the sti driver. I haven't seen issue with those patches except for the missing dependency on Kconfig where I have change "depends on" to "select". * 'drm-3.17-rc2-sti-fixes' of git://git.linaro.org/people/benjamin.gaignard/kernel: drm: sti: Add missing dependency on RESET_CONTROLLER drm: sti: Make of_device_id array const drm: sti: Fix return value check in sti_drm_platform_probe() drm: sti: hda: fix return value check in sti_hda_probe() drm: sti: hdmi: fix return value check in sti_hdmi_probe() drm: sti: tvout: fix return value check in sti_tvout_probe()
-
git://people.freedesktop.org/~robclark/linuxDave Airlie authored
misc msm fixes from Rob. * 'msm-fixes-3.17' of git://people.freedesktop.org/~robclark/linux: drm/msm: Fix missing unlock on error in msm_fbdev_create() drm/msm: fix compile error for non-dt builds drm/msm/mdp4: request vblank during modeset drm/msm: avoid flood of kernel logs on faults
-
David Herrmann authored
Kinda unexpected, but DIV_ROUND_UP() can overflow if passed an argument bigger than UINT_MAX - DIVISOR. Fix this by testing for "!cpp" before using it in the following division. Note that DIV_ROUND_UP() is defined as: #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) ..this will obviously overflow if (n + d - 1) is bigger than UINT_MAX. Reported-by:Tommi Rantala <tt.rantala@gmail.com> Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Reviewed-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Rob Clark authored
We really don't want distro's enabling this in their kernels. Try and make that more clear. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Just a few more radeon fixes for 3.17. * 'drm-fixes-3.17' of git://people.freedesktop.org/~agd5f/linux: radeon: Test for PCI root bus before assuming bus->self drm/radeon: handle broken disabled rb mask gracefully (6xx/7xx) (v2) drm/radeon: save/restore the PD addr on suspend/resume
-
git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-securityLinus Torvalds authored
Pull tomoyo fix from Serge Hallyn. * 'sec-v3.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/sergeh/linux-security: tomoyo: Fix pathname calculation breakage.
-
- 27 Aug, 2014 2 commits
-
-
Alex Williamson authored
If we assign a Radeon device to a virtual machine, we can no longer assume a fixed hardware topology, like the GPU having a parent device. This patch simply adds a few pci_is_root_bus() tests to avoid passing a NULL pointer to PCI access functions, allowing the radeon driver to work in a QEMU 440FX machine with an assigned HD8570 on the emulated PCI root bus. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID fixes from Jiri Kosina: - fixes for potential memory corruption problems in magicmouse and picolcd drivers (the HW would have to be manufactured to be deliberately evil to trigger those) which were found by Steven Vittitoe - fix for false error message appearing in dmesg from logitech-dj driver, from Benjamin Tissoires * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: picolcd: sanity check report size in raw_event() callback HID: magicmouse: sanity check report size in raw_event() callback HID: logitech-dj: prevent false errors to be shown
-
