Merge tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/drivers

TI sysc driver changes for v4.20 merge window

This series gets rid of the SYSC_QUIRK_RESOURCE_PROVIDER to make device
detection happen mostly only if #define DEBUG is set. Few core devices still
need to be detected to set legacy quirks.

We also add support for booting am335x, am437x and dra7 SoCs with L4 devices
defined in device tree instead of legacy platform data.

And finally we simplify suspend with just SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
and dropping the custom functions that were attempting to work around
issues that really turned out to be child device driver related issues.

Apologies for a late pull request, debugging the suspend issues took a while
and I did not want to send these changes until that got sorted out.

* tag 'omap-for-v4.20/ti-sysc-take2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS
  bus: ti-sysc: Make some warnings debug only
  bus: ti-sysc: Detect devices for debug on dra7
  bus: ti-sysc: Detect timer and gpio on dra7
  bus: ti-sysc: Detect devices on am335x when DEBUG is enabled
  bus: ti-sysc: Detect more devices on am473x for debugging
  bus: ti-sysc: Update revision masks to support am437x
  bus: ti-sysc: Defer suspend as needed
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers

i.MX drivers update for 4.20:
 - A couple of patches from Anson to update variable and macro naming
   in GPCv2 driver, as a preparation of reusing the driver on i.MX8.
 - Switch GPC/GPCv2 drivers to use SPDX identifier for licence claiming.
 - Clean up the unnecessary DT node name NULL pointer checking from
   imx-weim driver, since it can never be NULL at all.
 - A couple of improvements on GPC driver from Sven Schmitt to correct
   PDN register and use GPC_PGC_DOMAIN_* indexes for consistency.

* tag 'imx-drivers-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  soc: imx: gpcv2: Switch to SPDX identifier
  soc: imx: gpc: Switch to SPDX identifier
  bus: imx-weim: drop unnecessary DT node name NULL check
  soc: imx: gpcv2: make pgc driver more generic for other i.MX platforms
  soc: imx: gpcv2: use A_CORE instread of A7 for more i.MX platforms
  soc: imx: gpc: use GPC_PGC_DOMAIN_* indexes
  soc: imx: gpc: fix PDN delay
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/drivers

Qualcomm ARM Based Driver Updates for v4.20

* Refactor of SCM compatibles and clock requirements
* SMEM cleanup
* Add LLCC EDAC driver
* Fixes for GENI clocks and macros
* Fix includes for llcc-slice and smem
* String overflow fixes for APR and wcnss_ctrl
* Fixup for COMPILE_TEST of qcom driver Kconfigs
* Cleanup of Kconfig depends of rpmh, smd_rpm, smsm, and smp2p
* Add SCM dependencies to SPM and rmtfs-mem

* tag 'qcom-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux: (38 commits)
  soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples
  soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()
  soc: qcom: geni: Make version macros simpler
  dt-bindings: firmware: scm: Add MSM8998 and SDM845
  firmware: qcom: scm: Refactor clock handling
  dt-bindings: firmware: scm: Refactor compatibles and clocks
  soc: qcom: smem: a few last cleanups
  soc: qcom: smem: verify partition host ids match
  soc: qcom: smem: small change in global entry loop
  soc: qcom: smem: verify partition offset_free_uncached
  soc: qcom: smem: verify partition header size
  soc: qcom: smem: introduce qcom_smem_partition_header()
  soc: qcom: smem: require order of host ids to match
  soc: qcom: smem: verify both host ids in partition header
  soc: qcom: smem: small refactor in qcom_smem_enumerate_partitions()
  soc: qcom: smem: always ignore partitions with 0 offset or size
  soc: qcom: smem: initialize region struct only when successful
  soc: qcom: smem: rename variable in qcom_smem_get_global()
  drivers: qcom: rpmh-rsc: clear wait_for_compl after use
  soc: qcom: rmtfs-mem: Validate that scm is available
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions into next/drivers

Actions Semi SoC drivers for v4.20 #2

The SPS power domain driver is extended for S900 SoC.
This required merging a topic branch for the new bindings header.

* tag 'actions-drivers+s900-sps-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/afaerber/linux-actions:
  soc: actions: sps: Add S900 power domains
  dt-bindings: power: Add Actions Semi S900 SPS
  soc: actions: Update SPS help text for S700
  soc: actions: Convert to SPDX license identifiers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v4.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/drivers

PMIC wrapper:
- sort SoCs and PMICs ascending
- add capabilities
- add support for mt8183 SoC + mt6358 PMIC
- return false instead of 0
- add support for mt6765 SoC + mt6357 PMIC

* tag 'v4.19-next-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: pwrap: add mt6357 driver for mt6765 SoCs
  soc: mediatek: pwrap: add pwrap driver for mt6765 SoCs
  dt-bindings: pwrap: mediatek: add pwrap support for MT6765
  soc: mediatek: pwrap: use true and false for boolean values
  soc: mediatek: add mt8183 pwrap support
  soc: mediatek: pwrap: use group of bits for pwrap capability
  soc: mediatek: pwrap: order SoCs and PMICs ascending
  dt-bindings: mediatek: add compatible for mt8183 pwrap
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/drivers

Allwinner drivers changes for 4.20

The H6 is now supported in our SRAM driver bindings, and we have a small
Makefile change for the SRAM driver to build it without building the
ARCH_SUNXI architecture, especially relevant for the COMPILE_TEST case.

* tag 'sunxi-drivers-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  dt-bindings: sunxi-sram: add binding for Allwinner H6 SRAM C
  drivers: soc: Allow building the sunxi driver without ARCH_SUNXI
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

As Grygorii Strashko pointed out, the runtime PM use count of the
children can be whatever at suspend and we should not use it. So
let's just suspend ti-sysc at noirq level and get rid of some code.

Let's also remove the PM_SLEEP ifdef and use __maybe_unused as the
PM code already deals with the ifdefs.
Suggested-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Adopt the SPDX license identifier headers to ease license compliance
management.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Checking the child node names is pointless as the DT node name can
never be NULL, so remove it.
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX8MQ and i.MX8MM share same gpc module with i.MX7D, they
can reuse gpcv2 pgc driver for power domain control, this
patch renames all functions and structure definitions started
with "imx7" to "imx", and use .data in imx_gpcv2_dt_ids[] to
pass platform specific power domain data for power domain
driver, thus make gpcv2 pgc driver more generic for i.MX
platforms.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

gpcv2 driver is NOT just used on i.MX7D which has Cortex-A7
cores, but also on i.MX8MQ/i.MX8MM platforms which use Cortex-A53
cores, so let's use A_CORE instread of A7 to avoid confusion.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Acked-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Immutable branch for QCOM Geni patches

Add power domains for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[AF: Update Kconfig help text]
Signed-off-by: Andreas Färber <afaerber@suse.de>

This merges the DT binding header for S900 SPS driver.
Signed-off-by: Andreas Färber <afaerber@suse.de>

Define power domains for Actions Semi S900 SoC Smart Power System (SPS).
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>

We're currently warning about busy children on suspend in
sysc_child_suspend_noirq() but the legacy code omap_device does
not do that. Let's just make it dev_dbg() instead of dev_warn().
Signed-off-by: Tony Lindgren <tony@atomide.com>

We want to see the names of detected devices when DEBUG is enabled.
Signed-off-by: Tony Lindgren <tony@atomide.com>

We need to detect timer and gpio on dra7 because of the
SYSC_QUIRK_LEGACY_IDLE flag for suspend and resume.
Signed-off-by: Tony Lindgren <tony@atomide.com>

Merge tag 'renesas-drivers-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Renesas ARM Based SoC Drivers Updates for v4.20

* Convert to SPDX identifiers
* R-Car V3M (r8a77970) and V3H (r8a77980): Document Timer Unit (TMU) bindings
* RZ/G1N (r8a7744) and RZ/G1C (r8a77470) SoCs:
  - Document APMU and SMP enable method
* RZ/G2M (r8a74a1), RZ/G1N (r8a7744) and RZ/G2E (r8a774c0) SoCs:
  - Add reset support
  - Add sysc support
* RZ/G2M (r8a774a1), RZ/G2E (r8a774c0) and RZ/A2M (r7s9210) SoCs:
  - Add support for identifying SoC
* RZ/A2M (r7s9210) SoC:
  - Add basic SoC setup support

* tag 'renesas-drivers-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (21 commits)
  dt-bindings: apmu: Document r8a7744 support
  dt-bindings: timer: renesas: tmu: document R8A779{7|8}0 bindings
  dt-bindings: apmu: Document r8a77470 support
  soc: renesas: rcar-rst: Add support for RZ/G1N
  dt-bindings: reset: rcar-rst: Document r8a7744 reset module
  soc: renesas: rcar-sysc: Add r8a7744 support
  dt-bindings: power: rcar-sysc: Add r8a7744 power domain index macros
  dt-bindings: power: rcar-sysc: Document r8a7744 SYSC binding
  soc: renesas: rcar-rst: Add support for RZ/G2E
  dt-bindings: reset: rcar-rst: Document r8a774c0 rst
  soc: renesas: rcar-sysc: Add r8a774c0 support
  dt-bindings: power: rcar-sysc: Document r8a774c0 sysc
  dt-bindings: power: Add r8a774c0 SYSC power domain definitions
  soc: renesas: Identify RZ/G2E
  soc: renesas: convert to SPDX identifiers
  soc: renesas: rcar-rst: Add support for RZ/G2M
  soc: renesas: rcar-sysc: Add r8a774a1 support
  dt-bindings: power: Add r8a774a1 SYSC power domain definitions
  soc: renesas: identify RZ/A2
  ARM: shmobile: Add basic RZ/A2 SoC support
  ...
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'tegra-for-4.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers

soc/tegra: Changes for v4.20-rc1

This contains a pinctrl implementation for the pad configuration that
can be controlled from the PMC.

* tag 'tegra-for-4.20-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  soc/tegra: pmc: Implement pad configuration via pinctrl
  soc/tegra: pmc: Remove public pad voltage APIs
  soc/tegra: pmc: Use X macro to generate IO pad tables
  soc/tegra: pmc: Implement tegra_io_pad_is_powered()
  soc/tegra: pmc: Factor out DPD register bit calculation
  soc/tegra: pmc: Fix pad voltage configuration for Tegra186
  soc/tegra: pmc: Fix child-node lookup
  dt-bindings: Add Tegra PMC pad configuration bindings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

arm64: zynqmp: SoC changes for v4.20

- Adding firmware API for SoC with debugfs interface
  Firmware driver communicates to Platform Management Unit (PMU) by using
  SMC instructions routed to Arm Trusted Firmware (ATF). Initial version
  adds support for base firmware driver with query and clock APIs.

  EEMI spec is available here:
  https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf

* tag 'zynqmp-soc-for-v4.20-v2' of https://github.com/Xilinx/linux-xlnx:
  firmware: xilinx: Add debugfs for query data API
  firmware: xilinx: Add debugfs interface
  firmware: xilinx: Add clock APIs
  firmware: xilinx: Add query data API
  firmware: xilinx: Add Zynqmp firmware driver
  dt-bindings: firmware: Add bindings for ZynqMP firmware
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Add debugfs file to query platform specific data from firmware
using debugfs interface.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Firmware-debug provides debugfs interface to all APIs.
Debugfs can be used to call firmware APIs with required
parameters.

Usage:
* Calling firmware API through debugfs:
  # echo "<api-name> <arg1> .. <argn>" > /sys/.../zynqmp-firmware/pm

* Read output of last called firmware API:
  # cat /sys/.../zynqmp-firmware/pm

Refer ug1200 for more information on these APIs:
  * https://www.xilinx.com/support/documentation/user_guides/ug1200-eemi-api.pdf

Add basic debugfs file to get API version.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add clock APIs to control clocks through firmware
interface.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add ZynqMP firmware query data API to query platform
specific information(clocks, pins) from firmware.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

This patch is adding communication layer with firmware.
Firmware driver provides an interface to firmware APIs.
Interface APIs can be used by any driver to communicate to
PMUFW(Platform Management Unit). All requests go through ATF.
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Add documentation to describe Xilinx ZynqMP firmware driver
bindings. Firmware driver provides an interface to firmware
APIs. Interface APIs can be used by any driver to communicate
to PMUFW (Platform Management Unit).
Signed-off-by: Rajan Vaja <rajanv@xilinx.com>
Signed-off-by: Jolly Shah <jollys@xilinx.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

Merge tag 'at91-4.20-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into next/drivers

AT91 drivers for 4.20

 - use struct_size in atmel-ebi

* tag 'at91-4.20-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  memory: atmel-ebi: Use struct_size() in devm_kzalloc()
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'soc-fsl-next-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux into next/drivers

NXP/FSL SoC driver updates for v4.20

- Use of_get_child_by_name helper for QE driver
- Remove redundant pointer 'priv' for dpio driver

* tag 'soc-fsl-next-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/leo/linux:
  soc: fsl: dpio: remove redundant pointer 'priv'
  soc: fsl/qe: Use of_get_child_by_name helper
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'drivers_soc_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers

soc: driver soc update for v4.20

  - Enable host-id as an optional dt property
  - Fix minor typo in knav driver

* tag 'drivers_soc_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  soc: ti: fix spelling mistake "instace" -> "instance"
  firmware: ti_sci: Provide host-id as an optional dt parameter
  Documentation: dt: keystone: ti-sci: Add optional host-id parameter
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

SCMI updates for v4.20

1. Addition of interface to fetch estimated power from the firmware
   corresponding to each OPP of a device

2. Cleanup using strlcpy to ensure NULL-terminated strings for name
   strings instead of relying on the firmware to do the same

* tag 'scmi-updates-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: add a getter for power of performance states
  firmware: arm_scmi: use strlcpy to ensure NULL-terminated strings
Signed-off-by: Olof Johansson <olof@lixom.net>

Linux 4.19-rc3

Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/drivers

Amlogic ARM64 driver updates for v4.20
- add meson-canvas driver and bindings
- firmware: Add serial number sysfs entry

* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  soc: amlogic: add meson-canvas driver
  dt-bindings: soc: amlogic: add meson-canvas documentation
  firmware: meson_sm: Add serial number sysfs entry
Signed-off-by: Olof Johansson <olof@lixom.net>

MT6357 is a new power management IC and it is used for mt6765 SoCs.
To define mt6357_regs for pmic register mapping and pmic_mt6357
for accessing register.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

mt6765 is a highly integrated SoCs, it uses mt6357 for power management.
This patch adds pwrap driver to access mt6357. Pwrap of mt6765 support
dynamic priority meichanism, sequence monitor and starvation mechanism
to make transaction more reliable.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
[mb: change has_bridge to capabilities]
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Add binding document of pwrap for MT6765 SoCs.
Signed-off-by: Argus Lin <argus.lin@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>

Return statements in functions returning bool should use true or false
instead of an integer value.

This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>