This patch fixes policy deletion in xfrm_user so that it sets
km_event.data.byid.  This puts xfrm_user on par with what af_key
does in this case.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch turns km_event.data into a union.  This makes code that
uses it clearer.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch adjusts the SA state conversion in af_key such that
XFRM_STATE_ERROR/XFRM_STATE_DEAD will be converted to SADB_STATE_DEAD
instead of SADB_STATE_DYING.

According to RFC 2367, SADB_STATE_DYING SAs can be turned into
mature ones through updating their lifetime settings.  Since SAs
which are in the states XFRM_STATE_ERROR/XFRM_STATE_DEAD cannot
be resurrected, this value is unsuitable.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

This patch ensures that the hard state/policy expire notifications are
only sent when the state/policy is successfully removed from their
respective tables.

As it is, it's possible for a state/policy to both expire through
reaching a hard limit, as well as being deleted by the user.

Note that this behaviour isn't actually forbidden by RFC 2367.
However, it is a quality of implementation issue.

As an added bonus, the restructuring in this patch will help
eventually in moving the expire notifications from softirq
context into process context, thus improving their reliability.

One important side-effect from this change is that SAs reaching
their hard byte/packet limits are now deleted immediately, just
like SAs that have reached their hard time limits.

Previously they were announced immediately but only deleted after
30 seconds.

This is bad because it prevents the system from issuing an ACQUIRE
command until the existing state was deleted by the user or expires
after the time is up.

In the scenario where the expire notification was lost this introduces
a 30 second delay into the system for no good reason.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Heres the final patch.
What this patch provides

- netlink xfrm events
- ability to have events generated by netlink propagated to pfkey
  and vice versa.
- fixes the acquire lets-be-happy-with-one-success issue
Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>

Martin can maintain the DocBook system for us.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When significant delays happen during boot (e.g.  with a kernel debugger,
but the problem has also seen in other cases) the timeout for blanking the
console may trigger, but the work scheduler may not have been initialized,
yet.  schedule_work() will oops over the null keventd_wq.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Merge 'upstream-2.6.13' branch of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev

Make sure we re-parent itimers, and use BUG_ON() instead of an explicit
conditional BUG().

The git commit 794f5bfa
accidentally suffers from a previous typo in that file
(',' instead of ';' in end of line). Patch included.

Signed-off-by: Mika Kukkonen (mikukkon@iki.fi)
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is a fixed-up version of the broken "upstream-2.6.13" branch, where
I re-did the manual merge of drivers/net/r8169.c by hand, and made sure
the history is all good.

Signed-Off-By: Lee Revell <rlrevell@joe-job.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The fixes for sparse warnings mixed in with the fixups for
the raw_srb handler resulted in a bug that showed up in the 32 bit
environments when trying to issue calls directly to the physical devices
that are part of the arrays (ioctl scsi passthrough).

Received from Mark Salyzyn at adaptec.
Applied comment from Christoph to remove cpu_to_le32(0)
Applied Mark S fix of missing memcpy.
It applies to the scsi-misc-2.6 git tree.
Signed-off-by: Mark Haverkamp <markh@osdl.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

There are many drivers that have been setting the generic driver
model level shutdown callback, and pci thus must not override it.

Without this patch we can have really bad data loss on various
raid controllers.
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Drivers need not implement a hook that returns FAILED, and does nothing
else, since the SCSI midlayer code will do that for us.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

The SCSI ->done() hook should not be called from inside a spinlock.

Drivers that do this are mostly cut-n-paste from 2.2.x-era.
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Do all timer zapping in exit_itimers.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

__cfq_get_queue().  __cfq_get_queue() finds an existing queue (struct
cfq_queue) of the current process for the device and returns it.  If it's not
found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is
called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that
get_request() fails) if no __GFP_WAIT flag.

On the other hand, in __make_request(), get_request() is called without
__GFP_WAIT flag at the first time.  Thus, the get_request() fails when there is
no existing queue, typically when it's called for the first I/O request of the
process to the device.

Though it will be followed by get_request_wait() for general case,
__make_request() will just end the I/O with an error (EWOULDBLOCK) when the
request was for read-ahead.
Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>

Patch from Nicolas Pitre

Without this some devices fail to work again after a suspend event.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The initial IB2 addresses did not depend on the IB2 base. This
patch defines them as (VERSATILE_IB2_BASE + offset).

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The GPIO base for Integrator/CP is different from the
Integrator/AP. This patch sets the correct value for
INTEGRATOR_GPIO_BASE.

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The current red and blue colours on the Versatile CLCD are
reversed when the 5:6:5 mode is used. The patch sets the proper
bit in the SYS_CLCD register value.

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It looks like logic for enabling hardware tapping in ALPS driver was
inverted and we enable it only if it was already enabled by BIOS or
firmware.

I have a confirmation from one user that the patch below fixes the problem
for him and it might be beneficial if we could get it into 2.6.12.
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>