- 29 Aug, 2019 24 commits
-
-
Stefano Brivio authored
[ Upstream commit 1b4a7510 ] In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the KADT functions for sets matching on MAC addreses the copy of source or destination MAC address depending on the configured match. This was done correctly for hash:mac, but for hash:ip,mac and bitmap:ip,mac, copying and pasting the same code block presents an obvious problem: in these two set types, the MAC address is the second dimension, not the first one, and we are actually selecting the MAC address depending on whether the first dimension (IP address) specifies source or destination. Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags. This way, mixing source and destination matches for the two dimensions of ip,mac set types works as expected. With this setup: ip netns add A ip link add veth1 type veth peer name veth2 netns A ip addr add 192.0.2.1/24 dev veth1 ip -net A addr add 192.0.2.2/24 dev veth2 ip link set veth1 up ip -net A link set veth2 up dst=$(ip netns exec A cat /sys/class/net/veth2/address) ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16 ip netns exec A ipset add test_bitmap 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP ip netns exec A ipset create test_hash hash:ip,mac ip netns exec A ipset add test_hash 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP ipset correctly matches a test packet: # ping -c1 192.0.2.2 >/dev/null # echo $? 0 Reported-by:
Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stefano Brivio authored
[ Upstream commit b89d1548 ] In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the KADT check that prevents matching on destination MAC addresses for hash:mac sets, but forgot to remove the same check for hash:ip,mac set. Drop this check: functionality is now commented in man pages and there's no reason to restrict to source MAC address matching anymore. Reported-by:
-
Jia-Ju Bai authored
[ Upstream commit b55f3b84 ] In hwsim_dump_radio_nl(), when genlmsg_put() on line 3617 fails, hdr is assigned to NULL. Then hdr is used on lines 3622 and 3623: genl_dump_check_consistent(cb, hdr); genlmsg_end(skb, hdr); Thus, possible null-pointer dereferences may occur. To fix these bugs, hdr is used here when it is not NULL. This bug is found by a static analysis tool STCheck written by us. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Link: https://lore.kernel.org/r/20190729082332.28895-1-baijiaju1990@gmail.com [put braces on all branches] Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit a0d57a55 ] In start_isoc_chain(), usb_alloc_urb() on line 1392 may fail and return NULL. At this time, fifo->iso[i].urb is assigned to NULL. Then, fifo->iso[i].urb is used at some places, such as: LINE 1405: fill_isoc_urb(fifo->iso[i].urb, ...) urb->number_of_packets = num_packets; urb->transfer_flags = URB_ISO_ASAP; urb->actual_length = 0; urb->interval = interval; LINE 1416: fifo->iso[i].urb->... LINE 1419: fifo->iso[i].urb->... Thus, possible null-pointer dereferences may occur. To fix these bugs, "continue" is added to avoid using fifo->iso[i].urb when it is NULL. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michal Kalderon authored
[ Upstream commit 81af04b4 ] The hw_ver field was initialized to zero. Return the chip revision. This is relevant for rdma driver. Signed-off-by:
Michal Kalderon <michal.kalderon@marvell.com> Signed-off-by:
-
Bob Ham authored
[ Upstream commit 9a07406b ] The BroadMobi BM818 M.2 card uses the QMI protocol Signed-off-by:
Bob Ham <bob.ham@puri.sm> Signed-off-by:
Angus Ainslie (Purism) <angus@akkea.ca> Signed-off-by:
-
Peter Ujfalusi authored
[ Upstream commit 1e112c35 ] The slot_width is a property for the bus while the constraint for SNDRV_PCM_HW_PARAM_SAMPLE_BITS is for the in memory format. Applying slot_width constraint to sample_bits works most of the time, but it will blacklist valid formats in some cases. With slot_width 24 we can support S24_3LE and S24_LE formats as they both look the same on the bus, but a a 24 constraint on sample_bits would not allow S24_LE as it is stored in 32bits in memory. Implement a simple hw_rule function to allow all formats which require less or equal number of bits on the bus as slot_width (if configured). Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20190726064244.3762-2-peter.ujfalusi@ti.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Cheng-Yi Chiang authored
[ Upstream commit 789e162a ] This reverts commit db51707b. Revert "ASoC: rockchip: i2s: Support mono capture" Previous discussion in https://patchwork.kernel.org/patch/10147153/ explains the issue of the patch. While device is configured as 1-ch, hardware is still generating a 2-ch stream. When user space reads the data and assumes it is a 1-ch stream, the rate will be slower by 2x. Revert the change so 1-ch is not supported. User space can selectively take one channel data out of two channel if 1-ch is preferred. Currently, both channels record identical data. Signed-off-by:
Cheng-Yi Chiang <cychiang@chromium.org> Link: https://lore.kernel.org/r/20190726044202.26866-1-cychiang@chromium.orgSigned-off-by:
-
Navid Emamdoost authored
[ Upstream commit 3008e06f ] devm_kzalloc may fail and return NULL. So the null check is needed. Signed-off-by:
Navid Emamdoost <navid.emamdoost@gmail.com> Signed-off-by:
-
Navid Emamdoost authored
[ Upstream commit 9891d068 ] devm_kzalloc may fail and return null. So the null check is needed. Signed-off-by:
-
Ricard Wanderlof authored
[ Upstream commit 40aa5383 ] If the DAI format setup fails, there is no valid communication format between CPU and CODEC, so fail card instantiation, rather than continue with a card that will most likely not function properly. Signed-off-by:
Ricard Wanderlof <ricardw@axis.com> Link: https://lore.kernel.org/r/alpine.DEB.2.20.1907241132350.6338@lnxricardw1.se.axis.comSigned-off-by:
-
YueHaibing authored
[ Upstream commit b7a14297 ] This patch add error path for cgw_module_init to avoid possible crash if some error occurs. Fixes: c1aabdf3 ("can-gw: add netlink based CAN routing") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Acked-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Weitao Hou authored
[ Upstream commit 375f7558 ] add error check when workqueue alloc failed, and remove redundant code to make it clear. Fixes: e0000163 ("can: Driver for the Microchip MCP251x SPI CAN controllers") Signed-off-by:
Weitao Hou <houweitaoo@gmail.com> Acked-by:
Willem de Bruijn <willemb@google.com> Tested-by:
Sean Nyekjaer <sean@geanix.com> Signed-off-by:
-
Rasmus Villemoes authored
[ Upstream commit c6384560 ] CONFIG_CAN_LEDS is deprecated. When trying to use the generic netdev trigger as suggested, there's a small inconsistency with the link property: The LED is on initially, stays on when the device is brought up, and then turns off (as expected) when the device is brought down. Make sure the LED always reflects the state of the CAN device. Signed-off-by:
Rasmus Villemoes <rasmus.villemoes@prevas.dk> Acked-by:
-
Ido Schimmel authored
[ Upstream commit 1be79d89 ] The TC filters used in the test do not work with veth devices because the outer Ethertype is 802.1Q and not IPv4. The test passes with mlxsw netdevs since the hardware always looks at "The first Ethertype that does not point to either: VLAN, CNTAG or configurable Ethertype". Fix this by matching on the VLAN ID instead, but on the ingress side. The reason why this is not performed at egress is explained in the commit cited below. Fixes: 541ad323 ("selftests: forwarding: gre_multipath: Update next-hop statistics match criteria") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reported-by:
Stephen Suryaputra <ssuryaextr@gmail.com> Tested-by:
-
Ido Schimmel authored
[ Upstream commit efa7b79f ] The test did not enable IPv4 forwarding during its setup phase, which causes the test to fail on machines where IPv4 forwarding is disabled. Fixes: 54818c4c ("selftests: forwarding: Test multipath tunneling") Signed-off-by:
-
Maxime Chevallier authored
[ Upstream commit bba18318 ] PPv2's XLGMAC can wait for 3 idle frames before triggering a link up event. This can cause the link to be stuck low when there's traffic on the interface, so disable this feature. Fixes: 4bb04326 ("net: mvpp2: phylink support") Signed-off-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Thomas Falcon authored
[ Upstream commit 12185dfe ] The following scenario was encountered during testing of logical partition mobility on pseries partitions with bonded ibmvnic adapters in LACP mode. 1. Driver receives a signal that the device has been swapped, and it needs to reset to initialize the new device. 2. Driver reports loss of carrier and begins initialization. 3. Bonding driver receives NETDEV_CHANGE notifier and checks the slave's current speed and duplex settings. Because these are unknown at the time, the bond sets its link state to BOND_LINK_FAIL and handles the speed update, clearing AD_PORT_LACP_ENABLE. 4. Driver finishes recovery and reports that the carrier is on. 5. Bond receives a new notification and checks the speed again. The speeds are valid but miimon has not altered the link state yet. AD_PORT_LACP_ENABLE remains off. Because the slave's link state is still BOND_LINK_FAIL, no further port checks are made when it recovers. Though the slave devices are operational and have valid speed and duplex settings, the bond will not send LACPDU's. The simplest fix I can see is to force another speed check in bond_miimon_commit. This way the bond will update AD_PORT_LACP_ENABLE if needed when transitioning from BOND_LINK_FAIL to BOND_LINK_UP. CC: Jarod Wilson <jarod@redhat.com> CC: Jay Vosburgh <j.vosburgh@gmail.com> CC: Veaceslav Falico <vfalico@gmail.com> CC: Andy Gospodarek <andy@greyhouse.net> Signed-off-by:
Thomas Falcon <tlfalcon@linux.ibm.com> Signed-off-by:
-
Ilya Leoshkevich authored
[ Upstream commit c8eee413 ] "sendmsg6: rewrite IP & port (C)" fails on s390, because the code in sendmsg_v6_prog() assumes that (ctx->user_ip6[0] & 0xFFFF) refers to leading IPv6 address digits, which is not the case on big-endian machines. Since checking bitwise operations doesn't seem to be the point of the test, replace two short comparisons with a single int comparison. Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Acked-by:
Andrey Ignatov <rdna@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Signed-off-by:
-
Charles Keepax authored
[ Upstream commit 8dd26dff ] DPCM uses snd_soc_dapm_dai_get_connected_widgets to build a list of the widgets connected to a specific front end DAI so it can search through this list for available back end DAIs. The custom_stop_condition was added to is_connected_ep to facilitate this list not containing more widgets than is necessary. Doing so both speeds up the DPCM handling as less widgets need to be searched and avoids issues with CODEC to CODEC links as these would be confused with back end DAIs if they appeared in the list of available widgets. custom_stop_condition was implemented by aborting the graph walk when the condition is triggered, however there is an issue with this approach. Whilst walking the graph is_connected_ep should update the endpoints cache on each widget, if the walk is aborted the number of attached end points is unknown for that sub-graph. When the stop condition triggered, the original patch ignored the triggering widget and returned zero connected end points; a later patch updated this to set the triggering widget's cache to 1 and return that. Both of these approaches result in inaccurate values being stored in various end point caches as the values propagate back through the graph, which can result in later issues with widgets powering/not powering unexpectedly. As the original goal was to reduce the size of the widget list passed to the DPCM code, the simplest solution is to limit the functionality of the custom_stop_condition to the widget list. This means the rest of the graph will still be processed resulting in correct end point caches, but only widgets up to the stop condition will be added to the returned widget list. Fixes: 6742064a ("ASoC: dapm: support user-defined stop condition in dai_get_connected_widgets") Fixes: 5fdd022c ("ASoC: dpcm: play nice with CODEC<->CODEC links") Fixes: 09464974 ("ASoC: dapm: Fix to return correct path list in is_connected_ep.") Signed-off-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20190718084333.15598-1-ckeepax@opensource.cirrus.comSigned-off-by:
-
Wenwen Wang authored
[ Upstream commit 15a78ba1 ] In compat_do_replace(), a temporary buffer is allocated through vmalloc() to hold entries copied from the user space. The buffer address is firstly saved to 'newinfo->entries', and later on assigned to 'entries_tmp'. Then the entries in this temporary buffer is copied to the internal kernel structure through compat_copy_entries(). If this copy process fails, compat_do_replace() should be terminated. However, the allocated temporary buffer is not freed on this path, leading to a memory leak. To fix the bug, free the buffer before returning from compat_do_replace(). Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Reviewed-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Vladimir Kondratiev authored
[ Upstream commit b8bea8a5 ] Because CONFIG_OF defined for MIPS, cacheinfo attempts to fill information from DT, ignoring data filled by architecture routine. This leads to error reported cacheinfo: Unable to detect cache hierarchy for CPU 0 Way to fix this provided in commit fac51482 ("drivers: base: cacheinfo: fix x86 with CONFIG_OF enabled") Utilize same mechanism to report that cacheinfo set by architecture specific function Signed-off-by:
Vladimir Kondratiev <vladimir.kondratiev@linux.intel.com> Signed-off-by:
Paul Burton <paul.burton@mips.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: linux-mips@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
Thomas Bogendoerfer authored
[ Upstream commit a07e3324 ] i8253 clocksource needs a free running timer. This could only be used, if i8253 clockevent is set up as periodic. Signed-off-by:
Thomas Bogendoerfer <tbogendoerfer@suse.de> Signed-off-by:
-
Ilya Trukhanov authored
[ Upstream commit 65f11c72 ] Enable force feedback for the Thrustmaster Dual Trigger 2 in 1 Rumble Force gamepad. Compared to other Thrustmaster devices, left and right rumble motors here are swapped. Signed-off-by:
Ilya Trukhanov <lahvuun@gmail.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
- 25 Aug, 2019 16 commits
-
-
Greg Kroah-Hartman authored
-
Michal Simek authored
commit 60208a26 upstream. When mmc-pwrseq property is passed mmc_pwrseq_alloc() can return -EPROBE_DEFER because driver for power sequence provider is not probed yet. Do not show error message when this situation happens. Signed-off-by:
Michal Simek <michal.simek@xilinx.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Maxim Mikityanskiy authored
[ Upstream commit 405b93eb ] The current ARFS code relies on certain fields to be set in the SKB (e.g. transport_header) and extracts IP addresses and ports by custom code that parses the packet. The necessary SKB fields, however, are not always set at that point, which leads to an out-of-bounds access. Use skb_flow_dissect_flow_keys() to get the necessary information reliably, fix the out-of-bounds access and reuse the code. Fixes: 18c908e4 ("net/mlx5e: Add accelerated RFS support") Signed-off-by:
Maxim Mikityanskiy <maximmi@mellanox.com> Reviewed-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Huy Nguyen authored
[ Upstream commit 466df6eb ] Only support changing tx/rx pause frame setting if the net device is the vport group manager. Fixes: 3c2d18ef ("net/mlx5e: Support ethtool get/set_pauseparam") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
-
Ross Lagerwall authored
[ Upstream commit 3a0233dd ] At this point nr_frags has been incremented but the frag does not yet have a page assigned so freeing the skb results in a crash. Reset nr_frags before freeing the skb to prevent this. Signed-off-by:
Ross Lagerwall <ross.lagerwall@citrix.com> Signed-off-by:
-
Chris Packham authored
[ Upstream commit 8874ecae ] We set the field 'addr_trial_end' to 'jiffies', instead of the current value 0, at the moment the node address is initialized. This guarantees we don't inadvertently enter an address trial period when the node address is explicitly set by the user. Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit 227f2f03 ] We should also enable team's vlan tx offload in hw_enc_features, pass the vlan packets to the slave devices with vlan tci, let the slave handle vlan tunneling offload implementation. Fixes: 3268e5cb ("team: Advertise tunneling offload features") Signed-off-by:
-
Xin Long authored
[ Upstream commit a1794de8 ] As the annotation says in sctp_do_8_2_transport_strike(): "If the transport error count is greater than the pf_retrans threshold, and less than pathmaxrtx ..." It should be transport->error_count checked with pathmaxrxt, instead of asoc->pf_retrans. Fixes: 5aa93bcf ("sctp: Implement quick failover draft from tsvwg") Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
zhengbin authored
[ Upstream commit 6d5afe20 ] If the stream outq is not empty, need to kfree nstr_list. Fixes: d570a59c ("sctp: only allow the out stream reset when the stream outq is empty") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhengbin <zhengbin13@huawei.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 32d3182c ] packet_sendmsg() checks tx_ring.pg_vec to decide if it must call tpacket_snd(). Problem is that the check is lockless, meaning another thread can issue a concurrent setsockopt(PACKET_TX_RING ) to flip tx_ring.pg_vec back to NULL. Given that tpacket_snd() grabs pg_vec_lock mutex, we can perform the check again to solve the race. syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 11429 Comm: syz-executor394 Not tainted 5.3.0-rc4+ #101 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:packet_lookup_frame+0x8d/0x270 net/packet/af_packet.c:474 Code: c1 ee 03 f7 73 0c 80 3c 0e 00 0f 85 cb 01 00 00 48 8b 0b 89 c0 4c 8d 24 c1 48 b8 00 00 00 00 00 fc ff df 4c 89 e1 48 c1 e9 03 <80> 3c 01 00 0f 85 94 01 00 00 48 8d 7b 10 4d 8b 3c 24 48 b8 00 00 RSP: 0018:ffff88809f82f7b8 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff8880a45c7030 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 1ffff110148b8e06 RDI: ffff8880a45c703c RBP: ffff88809f82f7e8 R08: ffff888087aea200 R09: fffffbfff134ae50 R10: fffffbfff134ae4f R11: ffffffff89a5727f R12: 0000000000000000 R13: 0000000000000001 R14: ffff8880a45c6ac0 R15: 0000000000000000 FS: 00007fa04716f700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa04716edb8 CR3: 0000000091eb4000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: packet_current_frame net/packet/af_packet.c:487 [inline] tpacket_snd net/packet/af_packet.c:2667 [inline] packet_sendmsg+0x590/0x6250 net/packet/af_packet.c:2975 sock_sendmsg_nosec net/socket.c:637 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:657 ___sys_sendmsg+0x3e2/0x920 net/socket.c:2311 __sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413 __do_sys_sendmmsg net/socket.c:2442 [inline] __se_sys_sendmmsg net/socket.c:2439 [inline] __x64_sys_sendmmsg+0x9d/0x100 net/socket.c:2439 do_syscall_64+0xfd/0x6a0 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 69e3c75f ("net: TX_RING and packet mmap") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 48ec7014 ] In mlx4_en_config_rss_steer(), 'rss_map->indir_qp' is allocated through kzalloc(). After that, mlx4_qp_alloc() is invoked to configure RSS indirection. However, if mlx4_qp_alloc() fails, the allocated 'rss_map->indir_qp' is not deallocated, leading to a memory leak bug. To fix the above issue, add the 'qp_alloc_err' label to free 'rss_map->indir_qp'. Fixes: 4931c6ef ("net/mlx4_en: Optimized single ring steering") Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit 58799865 ] The dsa framework has optional .port_mdb_{prepare,add,del} callback fields for drivers to handle multicast database entries. When adding an entry, the framework goes through a prepare phase, then a commit phase. Drivers not providing these callbacks should be detected in the prepare phase. DSA core may still bypass the bridge layer and call the dsa_port_mdb_add function directly with no prepare phase or no switchdev trans object, and the framework ends up calling an undefined .port_mdb_add callback. This results in a NULL pointer dereference, as shown in the log below. The other functions seem to be properly guarded. Do the same for .port_mdb_add in dsa_switch_mdb_add_bitmap() as well. 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = (ptrval) [00000000] *pgd=00000000 Internal error: Oops: 80000005 [#1] SMP ARM Modules linked in: rtl8xxxu rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 CPU: 1 PID: 134 Comm: kworker/1:2 Not tainted 5.3.0-rc1-00247-gd3519030752a #1 Hardware name: Allwinner sun7i (A20) Family Workqueue: events switchdev_deferred_process_work PC is at 0x0 LR is at dsa_switch_event+0x570/0x620 pc : [<00000000>] lr : [<c08533ec>] psr: 80070013 sp : ee871db8 ip : 00000000 fp : ee98d0a4 r10: 0000000c r9 : 00000008 r8 : ee89f710 r7 : ee98d040 r6 : ee98d088 r5 : c0f04c48 r4 : ee98d04c r3 : 00000000 r2 : ee89f710 r1 : 00000008 r0 : ee98d040 Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6deb406a DAC: 00000051 Process kworker/1:2 (pid: 134, stack limit = 0x(ptrval)) Stack: (0xee871db8 to 0xee872000) 1da0: ee871e14 103ace2d 1dc0: 00000000 ffffffff 00000000 ee871e14 00000005 00000000 c08524a0 00000000 1de0: ffffe000 c014bdfc c0f04c48 ee871e98 c0f04c48 ee9e5000 c0851120 c014bef0 1e00: 00000000 b643aea2 ee9b4068 c08509a8 ee2bf940 ee89f710 ee871ecb 00000000 1e20: 00000008 103ace2d 00000000 c087e248 ee29c868 103ace2d 00000001 ffffffff 1e40: 00000000 ee871e98 00000006 00000000 c0fb2a50 c087e2d0 ffffffff c08523c4 1e60: ffffffff c014bdfc 00000006 c0fad2d0 ee871e98 ee89f710 00000000 c014c500 1e80: 00000000 ee89f3c0 c0f04c48 00000000 ee9e5000 c087dfb4 ee9e5000 00000000 1ea0: ee89f710 ee871ecb 00000001 103ace2d 00000000 c0f04c48 00000000 c087e0a8 1ec0: 00000000 efd9a3e0 0089f3c0 103ace2d ee89f700 ee89f710 ee9e5000 00000122 1ee0: 00000100 c087e130 ee89f700 c0fad2c8 c1003ef0 c087de4c 2e928000 c0fad2ec 1f00: c0fad2ec ee839580 ef7a62c0 ef7a9400 00000000 c087def8 c0fad2ec c01447dc 1f20: ef315640 ef7a62c0 00000008 ee839580 ee839594 ef7a62c0 00000008 c0f03d00 1f40: ef7a62d8 ef7a62c0 ffffe000 c0145b84 ffffe000 c0fb2420 c0bfaa8c 00000000 1f60: ffffe000 ee84b600 ee84b5c0 00000000 ee870000 ee839580 c0145b40 ef0e5ea4 1f80: ee84b61c c014a6f8 00000001 ee84b5c0 c014a5b0 00000000 00000000 00000000 1fa0: 00000000 00000000 00000000 c01010e8 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014bef0>] (raw_notifier_call_chain+0x18/0x20) [<c014bef0>] (raw_notifier_call_chain) from [<c08509a8>] (dsa_port_mdb_add+0x48/0x74) [<c08509a8>] (dsa_port_mdb_add) from [<c087e248>] (__switchdev_handle_port_obj_add+0x54/0xd4) [<c087e248>] (__switchdev_handle_port_obj_add) from [<c087e2d0>] (switchdev_handle_port_obj_add+0x8/0x14) [<c087e2d0>] (switchdev_handle_port_obj_add) from [<c08523c4>] (dsa_slave_switchdev_blocking_event+0x94/0xa4) [<c08523c4>] (dsa_slave_switchdev_blocking_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) [<c014bdfc>] (notifier_call_chain) from [<c014c500>] (blocking_notifier_call_chain+0x50/0x68) [<c014c500>] (blocking_notifier_call_chain) from [<c087dfb4>] (switchdev_port_obj_notify+0x44/0xa8) [<c087dfb4>] (switchdev_port_obj_notify) from [<c087e0a8>] (switchdev_port_obj_add_now+0x90/0x104) [<c087e0a8>] (switchdev_port_obj_add_now) from [<c087e130>] (switchdev_port_obj_add_deferred+0x14/0x5c) [<c087e130>] (switchdev_port_obj_add_deferred) from [<c087de4c>] (switchdev_deferred_process+0x64/0x104) [<c087de4c>] (switchdev_deferred_process) from [<c087def8>] (switchdev_deferred_process_work+0xc/0x14) [<c087def8>] (switchdev_deferred_process_work) from [<c01447dc>] (process_one_work+0x218/0x50c) [<c01447dc>] (process_one_work) from [<c0145b84>] (worker_thread+0x44/0x5bc) [<c0145b84>] (worker_thread) from [<c014a6f8>] (kthread+0x148/0x150) [<c014a6f8>] (kthread) from [<c01010e8>] (ret_from_fork+0x14/0x2c) Exception stack(0xee871fb0 to 0xee871ff8) 1fa0: 00000000 00000000 00000000 00000000 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: bad PC value ---[ end trace 1292c61abd17b130 ]--- [<c08533ec>] (dsa_switch_event) from [<c014bdfc>] (notifier_call_chain+0x48/0x84) corresponds to $ arm-linux-gnueabihf-addr2line -C -i -e vmlinux c08533ec linux/net/dsa/switch.c:156 linux/net/dsa/switch.c:178 linux/net/dsa/switch.c:328 Fixes: e6db98db ("net: dsa: add switch mdb bitmap functions") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Reviewed-by:
Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by:
-
YueHaibing authored
[ Upstream commit d595b03d ] As commit 30d8177e ("bonding: Always enable vlan tx offload") said, we should always enable bonding's vlan tx offload, pass the vlan packets to the slave devices with vlan tci, let them to handle vlan implementation. Now if encapsulation protocols like VXLAN is used, skb->encapsulation may be set, then the packet is passed to vlan device which based on bonding device. However in netif_skb_features(), the check of hw_enc_features: if (skb->encapsulation) features &= dev->hw_enc_features; clears NETIF_F_HW_VLAN_CTAG_TX/NETIF_F_HW_VLAN_STAG_TX. This results in same issue in commit 30d8177e like this: vlan_dev_hard_start_xmit -->dev_queue_xmit -->validate_xmit_skb -->netif_skb_features //NETIF_F_HW_VLAN_CTAG_TX is cleared -->validate_xmit_vlan -->__vlan_hwaccel_push_inside //skb->tci is cleared ... --> bond_start_xmit --> bond_xmit_hash //BOND_XMIT_POLICY_ENCAP34 --> __skb_flow_dissect // nhoff point to IP header --> case htons(ETH_P_8021Q) // skb_vlan_tag_present is false, so vlan = __skb_header_pointer(skb, nhoff, sizeof(_vlan), //vlan point to ip header wrongly Fixes: b2a103e6 ("bonding: convert to ndo_fix_features") Signed-off-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by:
-
Manish Chopra authored
[ Upstream commit 4a4d2d37 ] Commit 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence."), introduced a regression in driver that as a part of VF's reload flow, VLANs created on the VF doesn't get re-configured in hardware as vlan metadata/info was not getting cleared for the VFs which causes vlan PING to stop. This patch clears the vlan metadata/info so that VLANs gets re-configured back in the hardware in VF's reload flow and PING/traffic continues for VLANs created over the VFs. Fixes: 04f05230 ("bnx2x: Remove configured vlans as part of unload sequence.") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Sudarsana Kalluru <skalluru@marvell.com> Signed-off-by:
Shahed Shaikh <shshaikh@marvell.com> Signed-off-by:
-
Joerg Roedel authored
commit 24d2c521 upstream. The function is only called from another __init function, so it should be moved to .init too. Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
YueHaibing authored
commit 49e6979e upstream. trackpoint_detect() should be static inline while CONFIG_MOUSE_PS2_TRACKPOINT is not set, otherwise, we build fails: drivers/input/mouse/alps.o: In function `trackpoint_detect': alps.c:(.text+0x8e00): multiple definition of `trackpoint_detect' drivers/input/mouse/psmouse-base.o:psmouse-base.c:(.text+0x1b50): first defined here Reported-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
