- 30 Jun, 2022 19 commits
-
-
Jiang Jian authored
there is an unexpected word 'for' in the comments that need to be dropped file - drivers/net/ethernet/intel/ixgbe/ixgbe_main.c line - 5164 * ixgbe_lpbthresh - calculate low water mark for for flow control changed to: * ixgbe_lpbthresh - calculate low water mark for flow control Signed-off-by:
Jiang Jian <jiangjian@cdjrlc.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com>
-
Jiang Jian authored
there is an unexpected word "the" in the comments that need to be removed Signed-off-by:
-
Jiang Jian authored
there is an unexpected word "the" in the comments that need to be removed Signed-off-by:
-
Jiang Jian authored
there is an unexpected word "the" in the comments that need to be removed Signed-off-by:
-
Jesse Brandeburg authored
As found by the compile option -Wunused-macros, remove these macros that are never used by the code. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by:
-
Paolo Abeni authored
Yuwei Wang says: ==================== net, neigh: introduce interval_probe_time for periodic probe This series adds a new option `interval_probe_time_ms` in net, neigh for periodic probe, and add a limitation to prevent it set to 0 ==================== Link: https://lore.kernel.org/r/20220629084832.2842973-1-wangyuweihx@gmail.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Yuwei Wang authored
commit ed6cd6a1 ("net, neigh: Set lower cap for neigh_managed_work rearming") fixed a case when DELAY_PROBE_TIME is configured to 0, the processing of the system work queue hog CPU to 100%, and further more we should introduce a new option used by periodic probe Signed-off-by:
Yuwei Wang <wangyuweihx@gmail.com> Signed-off-by:
-
Yuwei Wang authored
add proc_dointvec_ms_jiffies_minmax to fit read msecs value to jiffies with a limited range of values Signed-off-by:
-
Jilin Yuan authored
Delete the redundant word 'slot'. Signed-off-by:
Jilin Yuan <yuanjilin@cdjrlc.com> Link: https://lore.kernel.org/r/20220629081632.54445-1-yuanjilin@cdjrlc.comSigned-off-by:
-
Yang Yingliang authored
On failure, devm_platform_ioremap_resource() returns a ERR_PTR() value and not NULL. Fix return value checking by using IS_ERR() and return PTR_ERR() as error value. Fixes: 7dc54d3b ("net: pcs: add Renesas MII converter driver") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Clément Léger <clement.leger@bootlin.com> Link: https://lore.kernel.org/r/20220628131259.3109124-1-yangyingliang@huawei.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Peng Wu authored
The devm_platform_ioremap_resource() function never returns NULL. It returns error pointers. Signed-off-by:
Peng Wu <wupeng58@huawei.com> Reported-by:
-
Jiawen Wu authored
Add doc build infrastructure for txgbe driver. Initialize PCI memory space for WangXun 10 Gigabit Ethernet devices. Signed-off-by:
Jiawen Wu <jiawenwu@trustnetic.com> Link: https://lore.kernel.org/r/20220628095530.889344-1-jiawenwu@trustnetic.comSigned-off-by:
-
Colin Ian King authored
There is no need to store the result of the addition back to variable count after the addition. The store is redundant, replace += with just + Cleans up clang scan build warning: warning: Although the value stored to 'count' is used in the enclosing expression, the value is never actually read from 'count' Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20220628145406.183527-1-colin.i.king@gmail.comSigned-off-by:
-
Vladimir Oltean authored
br_switchdev_fdb_notify() creates an on-stack FDB info variable, and initializes it member by member. As such, newly added fields which are not initialized by br_switchdev_fdb_notify() will contain junk bytes from the stack. Other uses of struct switchdev_notifier_fdb_info have a struct initializer which should put zeroes in the uninitialized fields. Add a reminder above the structure for future developers. Recently discussed during review. Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220524152144.40527-2-schultz.hans+netdev@gmail.com/#24877698 Link: https://patchwork.kernel.org/project/netdevbpf/patch/20220524152144.40527-3-schultz.hans+netdev@gmail.com/#24912269Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/20220628100831.2899434-1-vladimir.oltean@nxp.comSigned-off-by:
-
Jakub Kicinski authored
Oleksij Rempel says: ==================== net: dsa: add pause stats support ==================== Link: https://lore.kernel.org/r/20220628085155.2591201-1-o.rempel@pengutronix.deSigned-off-by:
-
Oleksij Rempel authored
This switch is calculating tx/rx_bytes for all packets including pause. So, include rx/tx_pause counter to rx/tx_packets to make tx/rx_bytes fit to rx/tx_packets. Link: https://lore.kernel.org/all/20220624220317.ckhx6z7cmzegvoqi@skbuf/Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Oleksij Rempel authored
Add support for pause specific stats. Tested on ksz9477. Signed-off-by:
-
Oleksij Rempel authored
Add support for pause stats. Signed-off-by:
-
Oleksij Rempel authored
Add support for pause stats Signed-off-by:
-
- 29 Jun, 2022 21 commits
-
-
Maksym Glubokiy authored
The following is now supported: $ tc qdisc add PORT clsact $ tc filter add dev PORT egress ... Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
Currently, this script sets up the test scenario, which is supposed to end in an inability of the system to negotiate a link. It then waits for a bit, and verifies that the system can diagnose why the link was not established. The wait time for the scenario where different link speeds are forced on the two ends of a loopback cable, was set to 4 seconds, which exactly covered it. As of a recent mlxsw firmware update, this time gets longer, and this test starts failing. The time that selftests currently wait for links to be established is currently $WAIT_TIMEOUT, or 20 seconds. It seems reasonable that if this is the time necessary to establish and bring up a link, it should also be enough to determine that a link cannot be established and why. Therefore in this patch, convert the sleeps to busywaits, so that if a failure is established sooner (as is expected), the test runs quicker. And use $WAIT_TIMEOUT as the time to wait. Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
-
Walter Heymans authored
A number of spelling and language mistakes in the flower section are fixed. The spacing between the text inside some comments and the comment symbols are also updated for consistency. Signed-off-by:
Walter Heymans <walter.heymans@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
David S. Miller authored
Arun Ramadoss says: ==================== net: dsa: microchip: use ksz_chip_reg for This patch series tries to use the same approach as struct ksz8 for register which has different address for different switch family. It moves the struct ksz8 from ksz8.h to struct ksz_chip_reg. Based on the switch detect, the corresponding mask, reg and shifts are assigned. ==================== Signed-off-by: -
Arun Ramadoss authored
This patch moves the broadcast ctrl, multicast ctrl and start control registers from ksz_chip_dat to ksz_chip_reg. Signed-off-by:
Arun Ramadoss <arun.ramadoss@microchip.com> Signed-off-by:
-
Arun Ramadoss authored
This patch moves the stp_ctrl_reg from the ksz_chip_data to ksz_chip_reg structure. Signed-off-by:
-
Arun Ramadoss authored
The register size for the ksz8 switches is u8 and for ksz9477 series is u16. To have common struct for ksz series switches the size of reg is increased from u8 to u16. Signed-off-by:
-
Arun Ramadoss authored
This patch removes the struct ksz8 from ksz8.h which is no longer needed. The platform bus specific details are now deferenced through dev->priv. Signed-off-by:
-
Arun Ramadoss authored
This patch moves ksz8->shifts from ksz8795.c to ksz_common.c. The shifts are dereferenced using dev->info->shifts. Signed-off-by:
-
Arun Ramadoss authored
This patch moves the ksz8->masks from ksz8795.c to ksz_common.c. The mask will be dereferenced using dev->info->masks. Signed-off-by:
-
Arun Ramadoss authored
This patch moves the ksz8->regs from ksz8795.c to the ksz_common.c. And the regs is dereferrenced using dev->info->regs. Signed-off-by:
-
David S. Miller authored
Biao Huang says: ==================== net: add more features for mtk-star-emac Changes in v4: 1. correct the usage of spin_lock/__napi_schedule. 2. fix coding style as Jakub's comments. Changes in v3: 1. refractor driver as Jakub's comments in patch "net: ethernet: mtk-star-emac: separate tx/rx handling with two NAPIs". 2. add acked-by as Rob's comments. 3. add a new patch for halp-duplex support in driver. Changes in v2: 1. fix coding style as Bartosz's comments. 2. add reviewed-by as Bartosz's comments. This series add more features for mtk-star-emac: 1. add reference clock pad selection for RMII; 2. add simple timing adjustment for RMII; 3. add support for MII; 4. add support for new IC MT8365; 5. separate tx/rx interrupt handling. ==================== Signed-off-by: -
Biao Huang authored
Current driver doesn't support half duplex correctly. This patch enable half duplex capability in hardware. Signed-off-by:
Biao Huang <biao.huang@mediatek.com> Signed-off-by:
Yinghua Pan <ot_yinghua.pan@mediatek.com> Signed-off-by:
-
Biao Huang authored
Current driver may lost tx interrupts under bidirectional test with iperf3, which leads to some unexpected issues. This patch let rx/tx interrupt enable/disable separately, and rx/tx are handled in different NAPIs. Signed-off-by:
-
Biao Huang authored
Add support for MII interface. If user wants to use MII, assign "MII" to "phy-mode" property in dts. Signed-off-by:
-
Biao Huang authored
Add description for new properties which will be parsed in driver. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Biao Huang authored
Add simple clock inversion for timing adjustment in driver. Add property "mediatek,txc-inverse" or "mediatek,rxc-inverse" to device node when necessary. Signed-off-by:
-
Biao Huang authored
This patch add a new dts property named "mediatek,rmii-rxc" parsing in driver, which will configure MAC to select which pin the RMII reference clock is connected to, TXC or RXC. TXC pad is the default reference clock pin. If user wants to use RXC pad instead, add "mediatek,rmii-rxc" to corresponding device node. Signed-off-by:
-
Biao Huang authored
Add binding document for Ethernet on MT8365. Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Acked-by:
-
Biao Huang authored
Add Ethernet driver support for MT8365 SoC. Signed-off-by:
Fabien Parent <fparent@baylibre.com> Signed-off-by:
-
Biao Huang authored
If the flags in request_irq() is IRQF_TRIGGER_NONE, the trigger method is determined by "interrupt" property in dts. So, modify the flag from IRQF_TRIGGER_FALLING to IRQF_TRIGGER_NONE. Signed-off-by:
-
