Pull nfsd fix from Chuck Lever:

 - Make new GSS Kerberos Kunit tests work on non-x86 platforms

* tag 'nfsd-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Properly terminate test case arrays
  SUNRPC: Let Kunit tests run with some enctypes compiled out

The argument to do_div() is a 32-bit integer, and it was read from a
32-bit register so there is no point in doing a 64-bit division on it.

On 32-bit arm, do_div() causes a compile-time warning here:

    include/asm-generic/div64.h:238:22: error: passing argument 1 of '__div64_32' from incompatible pointer type [-Werror=incompatible-pointer-types]
      238 |   __rem = __div64_32(&(n), __base); \
          |                      ^~~~
          |                      |
          |                      unsigned int *
    drivers/power/supply/qcom_battmgr.c:1130:4: note: in expansion of macro 'do_div'
     1130 |    do_div(battmgr->status.percent, 100);
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Back in 2008 we extended the capability bits from 32 to 64, and we did
it by extending the single 32-bit capability word from one word to an
array of two words.  It was then obfuscated by hiding the "2" behind two
macro expansions, with the reasoning being that maybe it gets extended
further some day.

That reasoning may have been valid at the time, but the last thing we
want to do is to extend the capability set any more.  And the array of
values not only causes source code oddities (with loops to deal with
it), but also results in worse code generation.  It's a lose-lose
situation.

So just change the 'u32[2]' into a 'u64' and be done with it.

We still have to deal with the fact that the user space interface is
designed around an array of these 32-bit values, but that was the case
before too, since the array layouts were different (ie user space
doesn't use an array of 32-bit values for individual capability masks,
but an array of 32-bit slices of multiple masks).

So that marshalling of data is actually simplified too, even if it does
remain somewhat obscure and odd.

This was all triggered by my reaction to the new "cap_isidentical()"
introduced recently.  By just using a saner data structure, it went from

	unsigned __capi;
	CAP_FOR_EACH_U32(__capi) {
		if (a.cap[__capi] != b.cap[__capi])
			return false;
	}
	return true;

to just being

	return a.val == b.val;

instead.  Which is rather more obvious both to humans and to compilers.

Cc: Mateusz Guzik <mjguzik@gmail.com>
Cc: Casey Schaufler <casey@schaufler-ca.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Moore <paul@paul-moore.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull sh updates from John Paul Adrian Glaubitz:

 - regression fix in connection with the rtl8169 driver on SuperH boards
   that was introduced when the driver was switched to use
   devm_clk_get_optional_enabled() to simplify the code (Geert
   Uytterhoeven)

 - build warning fix to allow the kernel to be built with CONFIG_WERROR
   enabled (Michael Karcher)

* tag 'sh-for-v6.3-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: clk: Fix clk_enable() to return 0 on NULL clk
  sh: intc: Avoid spurious sizeof-pointer-div warning

Merge tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Make -mstrict-align configurable

 - Add kernel relocation and KASLR support

 - Add single kernel image implementation for kdump

 - Add hardware breakpoints/watchpoints support

 - Add kprobes/kretprobes/kprobes_on_ftrace support

 - Add LoongArch support for some selftests.

* tag 'loongarch-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits)
  selftests/ftrace: Add LoongArch kprobe args string tests support
  selftests/seccomp: Add LoongArch selftesting support
  tools: Add LoongArch build infrastructure
  samples/kprobes: Add LoongArch support
  LoongArch: Mark some assembler symbols as non-kprobe-able
  LoongArch: Add kprobes on ftrace support
  LoongArch: Add kretprobes support
  LoongArch: Add kprobes support
  LoongArch: Simulate branch and PC* instructions
  LoongArch: ptrace: Add hardware single step support
  LoongArch: ptrace: Add function argument access API
  LoongArch: ptrace: Expose hardware breakpoints to debuggers
  LoongArch: Add hardware breakpoints/watchpoints support
  LoongArch: kdump: Add crashkernel=YM handling
  LoongArch: kdump: Add single kernel image implementation
  LoongArch: Add support for kernel address space layout randomization (KASLR)
  LoongArch: Add support for kernel relocation
  LoongArch: Add la_abs macro implementation
  LoongArch: Add JUMP_VIRT_ADDR macro implementation to avoid using la.abs
  LoongArch: Use la.pcrel instead of la.abs when it's trivially possible
  ...

Pull UML updates from Richard Weinberger:

 - Add support for rust (yay!)

 - Add support for LTO

 - Add platform bus support to virtio-pci

 - Various virtio fixes

 - Coding style, spelling cleanups

* tag 'uml-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: (27 commits)
  Documentation: rust: Fix arch support table
  uml: vector: Remove unused definitions VECTOR_{WRITE,HEADERS}
  um: virt-pci: properly remove PCI device from bus
  um: virtio_uml: move device breaking into workqueue
  um: virtio_uml: mark device as unregistered when breaking it
  um: virtio_uml: free command if adding to virtqueue failed
  UML: define RUNTIME_DISCARD_EXIT
  virt-pci: add platform bus support
  um-virt-pci: Make max delay configurable
  um: virt-pci: implement pcibios_get_phb_of_node()
  um: Support LTO
  um: put power options in a menu
  um: Use CFLAGS_vmlinux
  um: Prevent building modules incompatible with MODVERSIONS
  um: Avoid pcap multiple definition errors
  um: Make the definition of cpu_data more compatible
  x86: um: vdso: Add '%rcx' and '%r11' to the syscall clobber list
  rust: arch/um: Add support for CONFIG_RUST under x86_64 UML
  rust: arch/um: Disable FP/SIMD instruction to match x86
  rust: arch/um: Use 'pie' relocation mode under UML
  ...

Pull jffs2, ubi and ubifs updates from Richard Weinberger:
 "JFFS2:
   - Fix memory corruption in error path
   - Spelling and coding style fixes

  UBI:
   - Switch to BLK_MQ_F_BLOCKING in ubiblock
   - Wire up partent device (for sysfs)
   - Multiple UAF bugfixes
   - Fix for an infinite loop in WL error path

  UBIFS:
   - Fix for multiple memory leaks in error paths
   - Fixes for wrong space accounting
   - Minor cleanups
   - Spelling and coding style fixes"

* tag 'ubifs-for-linus-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: (36 commits)
  ubi: block: Fix a possible use-after-free bug in ubiblock_create()
  ubifs: make kobj_type structures constant
  mtd: ubi: block: wire-up device parent
  mtd: ubi: wire-up parent MTD device
  ubi: use correct names in function kernel-doc comments
  ubi: block: set BLK_MQ_F_BLOCKING
  jffs2: Fix list_del corruption if compressors initialized failed
  jffs2: Use function instead of macro when initialize compressors
  jffs2: fix spelling mistake "neccecary"->"necessary"
  ubifs: Fix kernel-doc
  ubifs: Fix some kernel-doc comments
  UBI: Fastmap: Fix kernel-doc
  ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
  ubi: Fix UAF wear-leveling entry in eraseblk_count_seq_show()
  ubi: fastmap: Fix missed fm_anchor PEB in wear-leveling after disabling fastmap
  ubifs: ubifs_releasepage: Remove ubifs_assert(0) to valid this process
  ubifs: ubifs_writepage: Mark page dirty after writing inode failed
  ubifs: dirty_cow_znode: Fix memleak in error handling path
  ubifs: Re-statistic cleaned znode count if commit failed
  ubi: Fix permission display of the debugfs files
  ...

Pull 9p updates from Eric Van Hensbergen:

 - some fixes and cleanup setting up for a larger set of performance
   patches I've been working on

 - a contributed fixes relating to 9p/rdma

 - some contributed fixes relating to 9p/xen

* tag '9p-6.3-for-linus-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: fix error reporting in v9fs_dir_release
  net/9p: fix bug in client create for .L
  9p/rdma: unmap receive dma buffer in rdma_request()/post_recv()
  9p/xen: fix connection sequence
  9p/xen: fix version parsing
  fs/9p: Expand setup of writeback cache to all levels
  net/9p: Adjust maximum MSIZE to account for p9 header

Pull jfs update from Dave Kleikamp:
 "Just one simple sanity check"

* tag 'jfs-6.3' of https://github.com/kleikamp/linux-shaggy:
  fs/jfs: fix shift exponent db_agl2size negative

Pull exfat updates from Namjae Jeon:

 - Handle vendor extension and allocation entries as unrecognized benign
   secondary entries

 - Fix wrong ->i_blocks on devices with non-512 byte sector

 - Add the check to avoid returning -EIO from exfat_readdir() at current
   position exceeding the directory size

 - Fix a bug that reach the end of the directory stream at a position
   not aligned with the dentry size

 - Redefine DIR_DELETED as 0xFFFFFFF7, the bad cluster number

 - Two cleanup fixes and fix cluster leakage in error handling

* tag 'exfat-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat:
  exfat: fix the newly allocated clusters are not freed in error handling
  exfat: don't print error log in normal case
  exfat: remove unneeded code from exfat_alloc_cluster()
  exfat: handle unreconized benign secondary entries
  exfat: fix inode->i_blocks for non-512 byte sector size device
  exfat: redefine DIR_DELETED as the bad cluster number
  exfat: fix reporting fs error when reading dir beyond EOF
  exfat: fix unexpected EOF while reading dir

Pull moar xfs updates from Darrick Wong:
 "This contains a fix for a deadlock in the allocator. It continues the
  slow march towards being able to offline AGs, and it refactors the
  interface to the xfs allocator to be less indirection happy.

  Summary:

   - Fix a deadlock in the free space allocator due to the AG-walking
     algorithm forgetting to follow AG-order locking rules

   - Make the inode allocator prefer existing free inodes instead of
     failing to allocate new inode chunks when free space is low

   - Set minleft correctly when setting allocator parameters for bmap
     changes

   - Fix uninitialized variable access in the getfsmap code

   - Make a distinction between active and passive per-AG structure
     references. For now, active references are taken to perform some
     work in an AG on behalf of a high level operation; passive
     references are used by lower level code to finish operations
     started by other threads. Eventually this will become part of
     online shrink

   - Split out all the different allocator strategies into separate
     functions to move us away from design antipattern of filling out a
     huge structure for various differentish things and issuing a single
     function multiplexing call

   - Various cleanups in the filestreams allocator code, which we might
     very well want to deprecate instead of continuing

   - Fix a bug with the agi rotor code that was introduced earlier in
     this series"

* tag 'xfs-6.3-merge-4' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (44 commits)
  xfs: restore old agirotor behavior
  xfs: fix uninitialized variable access
  xfs: refactor the filestreams allocator pick functions
  xfs: return a referenced perag from filestreams allocator
  xfs: pass perag to filestreams tracing
  xfs: use for_each_perag_wrap in xfs_filestream_pick_ag
  xfs: track an active perag reference in filestreams
  xfs: factor out MRU hit case in xfs_filestream_select_ag
  xfs: remove xfs_filestream_select_ag() longest extent check
  xfs: merge new filestream AG selection into xfs_filestream_select_ag()
  xfs: merge filestream AG lookup into xfs_filestream_select_ag()
  xfs: move xfs_bmap_btalloc_filestreams() to xfs_filestreams.c
  xfs: use xfs_bmap_longest_free_extent() in filestreams
  xfs: get rid of notinit from xfs_bmap_longest_free_extent
  xfs: factor out filestreams from xfs_bmap_btalloc_nullfb
  xfs: convert trim to use for_each_perag_range
  xfs: convert xfs_alloc_vextent_iterate_ags() to use perag walker
  xfs: move the minimum agno checks into xfs_alloc_vextent_check_args
  xfs: fold xfs_alloc_ag_vextent() into callers
  xfs: move allocation accounting to xfs_alloc_vextent_set_fsbno()
  ...

Pull i3c updates from Alexandre Belloni:
 "Subsystem:
   - transfer pid from boardinfo to device info

  Drivers:
   - dw-i3c-master: stop hardcoding initial speed"

* tag 'i3c/for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: stop hardcoding initial speed
  i3c: transfer pid from boardinfo to device info

Pull Documentation stragglers from Jonathan Corbet:
 "A handful of documentation patches that were ready before the merge
  window, but which I didn't get merged for the first round:

   - A recommendation from Thorsten (also akpm) on use of Link tags to
     point out problem reports

   - Some front-page formatting tweaks

   - Another Spanish translation

   - One typo(ish) fix"

* tag 'docs-6.3-2' of git://git.lwn.net/linux:
  docs: recommend using Link: whenever using Reported-by:
  Documentation: front page: use recommended heading adornments
  docs/sp_SP: Add process programming-language translation
  docs: locking: refer to the actual existing config names

Bus-speed could be default(12.5MHz) or defined by users in dts.
Dw-i3c-master should not hard-code the initial speed to be
I3C_BUS_TYP_I3C_SCL_RATE (12.5MHz)
And because of Synopsys's I3C controller limit (hcnt/lcnt register
length) and core-clk provided, there is a limit to bus speed, too.
For example, when core-clk is 250 MHz, the bus speed cannot be
lowered below 1MHz.

Tested: tested with an i3c sensor and captured with a logic analyzer.
Signed-off-by: Jack Chen <zenghuchen@google.com>
Link: https://lore.kernel.org/r/20230216151057.293764-1-zenghuchen@google.comSigned-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

Merge tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "This rather small set of changes includes some minor fixes and
  improvements.

  The AB8500 driver gained support for reading the initial hardware
  state and the Synopsys DesignWare driver received some work to prepare
  for device tree and platform support"

* tag 'pwm/for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: dwc: Use devm_pwmchip_add()
  pwm: dwc: Move memory allocation to own function
  pwm: dwc: Change &pci->dev to dev in probe
  dt-bindings: pwm: Document Synopsys DesignWare snps,pwm-dw-apb-timers-pwm2
  pwm: iqs620a: Replace one remaining instance of regmap_update_bits()
  pwm: ab8500: Implement .get_state()
  pwm: ab8500: Fix calculation of duty and period
  pwm: lp3943: Drop unused i2c include
  dt-bindings: pwm: mediatek: Convert pwm-mediatek to DT schema
  pwm: stm32-lp: fix the check on arr and cmp registers update
  pwm: Move pwm_capture() dummy to restore order
  pwm: sifive: Always let the first pwm_apply_state succeed

Pull ext4 updates from Ted Ts'o:
 "Improve performance for ext4 by allowing multiple process to perform
  direct I/O writes to preallocated blocks by using a shared inode lock
  instead of taking an exclusive lock.

  In addition, multiple bug fixes and cleanups"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix incorrect options show of original mount_opt and extend mount_opt2
  ext4: Fix possible corruption when moving a directory
  ext4: init error handle resource before init group descriptors
  ext4: fix task hung in ext4_xattr_delete_inode
  jbd2: fix data missing when reusing bh which is ready to be checkpointed
  ext4: update s_journal_inum if it changes after journal replay
  ext4: fail ext4_iget if special inode unallocated
  ext4: fix function prototype mismatch for ext4_feat_ktype
  ext4: remove unnecessary variable initialization
  ext4: fix inode tree inconsistency caused by ENOMEM
  ext4: refuse to create ea block when umounted
  ext4: optimize ea_inode block expansion
  ext4: remove dead code in updating backup sb
  ext4: dio take shared inode lock when overwriting preallocated blocks
  ext4: don't show commit interval if it is zero
  ext4: use ext4_fc_tl_mem in fast-commit replay path
  ext4: improve xattr consistency checking and error reporting

In error handling 'free_cluster', before num_alloc clusters allocated,
p_chain->size will not updated and always 0, thus the newly allocated
clusters are not freed.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

When allocating a new cluster, exFAT first allocates from the
next cluster of the last cluster of the file. If the last cluster
of the file is the last cluster of the volume, allocate from the
first cluster. This is a normal case, but the following error log
will be printed. It makes users confused, so this commit removes
the error log.

[1960905.181545] exFAT-fs (sdb1): hint_cluster is invalid (262130)
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

In the removed code, num_clusters is 0, nothing is done in
exfat_chain_cont_cluster(), so it is unneeded, remove it.
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Andy Wu <Andy.Wu@sony.com>
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>

Commit 226fae12 ("vc_screen: move load of struct vc_data pointer in
vcs_read() to avoid UAF") moved the call to vcs_vc() into the loop.

While doing this it also moved the unconditional assignment of

	ret = -ENXIO;

This unconditional assignment was valid outside the loop but within it
it clobbers the actual value of ret.

To avoid this only assign "ret = -ENXIO" when actually needed.

[ Also, the 'goto unlock_out" needs to be just a "break", so that it
  does the right thing when it exits on later iterations when partial
  success has happened - Linus ]
Reported-by: Storm Dragon <stormdragon2976@gmail.com>
Link: https://lore.kernel.org/lkml/Y%2FKS6vdql2pIsCiI@hotmail.com/
Fixes: 226fae12 ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/lkml/64981d94-d00c-4b31-9063-43ad0a384bde@t-8ch.de/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

access(2) remains commonly used, for example on exec:
access("/etc/ld.so.preload", R_OK)

or when running gcc: strace -c gcc empty.c

  % time     seconds  usecs/call     calls    errors syscall
  ------ ----------- ----------- --------- --------- ----------------
    0.00    0.000000           0        42        26 access

It falls down to do_faccessat without the AT_EACCESS flag, which in turn
results in allocation of new creds in order to modify fsuid/fsgid and
caps.  This is a very expensive process single-threaded and most notably
multi-threaded, with numerous structures getting refed and unrefed on
imminent new cred destruction.

Turns out for typical consumers the resulting creds would be identical
and this can be checked upfront, avoiding the hard work.

An access benchmark plugged into will-it-scale running on Cascade Lake
shows:

    test     proc     before       after
    access1     1    1310582     2908735    (+121%) # distinct files
    access1    24    4716491    63822173   (+1353%) # distinct files
    access2    24    2378041     5370335    (+125%) # same file

The above benchmarks are not integrated into will-it-scale, but can be
found in a pull request:

  https://github.com/antonblanchard/will-it-scale/pull/36/filesSigned-off-by: Mateusz Guzik <mjguzik@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Reviewed-by: Serge Hallyn <serge@hallyn.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've got a huge number of patches that improve code
  readability along with minor bug fixes, while we've mainly fixed some
  critical issues in recently-added per-block age-based extent_cache,
  atomic write support, and some folio cases.

  Enhancements:

   - add sysfs nodes to set last_age_weight and manage
     discard_io_aware_gran

   - show ipu policy in debugfs

   - reduce stack memory cost by using bitfield in struct f2fs_io_info

   - introduce trace_f2fs_replace_atomic_write_block

   - enhance iostat support and adds flush commands

  Bug fixes:

   - revert "f2fs: truncate blocks in batch in __complete_revoke_list()"

   - fix kernel crash on the atomic write abort flow

   - call clear_page_private_reference in .{release,invalid}_folio

   - support .migrate_folio for compressed inode

   - fix cgroup writeback accounting with fs-layer encryption

   - retry to update the inode page given data corruption

   - fix kernel crash due to NULL io->bio

   - fix some bugs in per-block age-based extent_cache:
       - wrong calculation of block age
       - update age extent in f2fs_do_zero_range()
       - update age extent correctly during truncation"

* tag 'f2fs-for-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (81 commits)
  f2fs: drop unnecessary arg for f2fs_ioc_*()
  f2fs: Revert "f2fs: truncate blocks in batch in __complete_revoke_list()"
  f2fs: synchronize atomic write aborts
  f2fs: fix wrong segment count
  f2fs: replace si->sbi w/ sbi in stat_show()
  f2fs: export ipu policy in debugfs
  f2fs: make kobj_type structures constant
  f2fs: fix to do sanity check on extent cache correctly
  f2fs: add missing description for ipu_policy node
  f2fs: fix to set ipu policy
  f2fs: fix typos in comments
  f2fs: fix kernel crash due to null io->bio
  f2fs: use iostat_lat_type directly as a parameter in the iostat_update_and_unbind_ctx()
  f2fs: add sysfs nodes to set last_age_weight
  f2fs: fix f2fs_show_options to show nogc_merge mount option
  f2fs: fix cgroup writeback accounting with fs-layer encryption
  f2fs: fix wrong calculation of block age
  f2fs: fix to update age extent in f2fs_do_zero_range()
  f2fs: fix to update age extent correctly during truncation
  f2fs: fix to avoid potential memory corruption in __update_iostat_latency()
  ...

Restore the vcs_size() handling in vcs_read() to what
it had been in previous version.

Fixes: 226fae12 ("vc_screen: move load of struct vc_data pointer in vcs_read() to avoid UAF")
Suggested-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: George Kennedy <george.kennedy@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

KUnit's 'hooks.o' file need to be built-in whenever KUnit is enabled
(even if CONFIG_KUNIT=m).  We'd previously attemtped to do this by
adding 'kunit/hooks.o' to obj-y in lib/Makefile, but this caused hooks.c
to be rebuilt even when it was unchanged.

Instead, always recurse into lib/kunit using obj-y when KUnit is
enabled, and add the hooks there.

Fixes: 7170b7ed ("kunit: Add "hooks" to call into KUnit when it's built as a module").
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/linux-kselftest/CAHk-=wiEf7irTKwPJ0jTMOF3CS-13UXmF6Fns3wuWpOZ_wGyZQ@mail.gmail.com/Signed-off-by: David Gow <davidgow@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from wireless and netfilter.

  The notable fixes here are the EEE fix which restores boot for many
  embedded platforms (real and QEMU); WiFi warning suppression and the
  ICE Kconfig cleanup.

  Current release - regressions:

   - phy: multiple fixes for EEE rework

   - wifi: wext: warn about usage only once

   - wifi: ath11k: allow system suspend to survive ath11k

  Current release - new code bugs:

   - mlx5: Fix memory leak in IPsec RoCE creation

   - ibmvnic: assign XPS map to correct queue index

  Previous releases - regressions:

   - netfilter: ip6t_rpfilter: Fix regression with VRF interfaces

   - netfilter: ctnetlink: make event listener tracking global

   - nf_tables: allow to fetch set elements when table has an owner

   - mlx5:
      - fix skb leak while fifo resync and push
      - fix possible ptp queue fifo use-after-free

  Previous releases - always broken:

   - sched: fix action bind logic

   - ptp: vclock: use mutex to fix "sleep on atomic" bug if driver also
     uses a mutex

   - netfilter: conntrack: fix rmmod double-free race

   - netfilter: xt_length: use skb len to match in length_mt6, avoid
     issues with BIG TCP

  Misc:

   - ice: remove unnecessary CONFIG_ICE_GNSS

   - mlx5e: remove hairpin write debugfs files

   - sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy"

* tag 'net-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (53 commits)
  tcp: tcp_check_req() can be called from process context
  net: phy: c45: fix network interface initialization failures on xtensa, arm:cubieboard
  xen-netback: remove unused variables pending_idx and index
  net/sched: act_api: move TCA_EXT_WARN_MSG to the correct hierarchy
  net: dsa: ocelot_ext: remove unnecessary phylink.h include
  net: mscc: ocelot: fix duplicate driver name error
  net: dsa: felix: fix internal MDIO controller resource length
  net: dsa: seville: ignore mscc-miim read errors from Lynx PCS
  net/sched: act_sample: fix action bind logic
  net/sched: act_mpls: fix action bind logic
  net/sched: act_pedit: fix action bind logic
  wifi: wext: warn about usage only once
  wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
  qede: avoid uninitialized entries in coal_entry array
  nfc: fix memory leak of se_io context in nfc_genl_se_io
  ice: remove unnecessary CONFIG_ICE_GNSS
  net/sched: cls_api: Move call to tcf_exts_miss_cookie_base_destroy()
  ibmvnic: Assign XPS map to correct queue index
  docs: net: fix inaccuracies in msg_zerocopy.rst
  tools: net: add __pycache__ to gitignore
  ...

Unable to handle kernel paging request at virtual address 73657420 when execute
[73657420] *pgd=00000000
Internal error: Oops: 80000005 [#1] ARM
CPU: 0 PID: 1 Comm: swapper Tainted: G                 N 6.2.0-rc7-00133-g373f26a81164-dirty #9
Hardware name: Generic DT based system
PC is at 0x73657420
LR is at kunit_run_tests+0x3e0/0x5f4

On x86 with GCC 12, the missing array terminators did not seem to
matter. Other platforms appear to be more picky.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

Allow the new GSS Kerberos encryption type test suites to run
outside of the kunit infrastructure. Replace the assertion that
fires when lookup_enctype() so that the case is skipped instead of
failing outright.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>

This is a follow up of commit 0a375c82 ("tcp: tcp_rtx_synack()
can be called from process context").

Frederick Lawler reported another "__this_cpu_add() in preemptible"
warning caused by the same reason.

In my former patch I took care of tcp_rtx_synack()
but forgot that tcp_check_req() also contained some SNMP updates.

Note that some parts of tcp_check_req() always run in BH context,
I added a comment to clarify this.

Fixes: 8336886f ("tcp: TCP Fast Open Server - support TFO listeners")
Link: https://lore.kernel.org/netdev/8cd33923-a21d-397c-e46b-2a068c287b03@cloudflare.com/T/Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Frederick Lawler <fred@cloudflare.com>
Tested-by: Frederick Lawler <fred@cloudflare.com>
Link: https://lore.kernel.org/r/20230227083336.4153089-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Without proper initialization, "changed" returned random numbers and caused
interface initialization failures.

Fixes: 022c3f87 ("net: phy: add genphy_c45_ethtool_get/set_eee() support")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230225071644.2754893-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

building with gcc and W=1 reports
drivers/net/xen-netback/netback.c:886:21: error: variable
  ‘pending_idx’ set but not used [-Werror=unused-but-set-variable]
  886 |                 u16 pending_idx;
      |                     ^~~~~~~~~~~

pending_idx is not used so remove it.  Since index was only
used to set pending_idx, remove index as well.
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20230226163429.2351600-1-trix@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.3

First set of fixes for v6.3. We have only three oneliners. The most
important one is the patch reducing warnings about the Wireless
Extensions usage, reported by Linus.

* tag 'wireless-2023-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: wext: warn about usage only once
  wifi: mt76: usb: fix use-after-free in mt76u_free_rx_queue
  wifi: ath11k: allow system suspend to survive ath11k
====================

Link: https://lore.kernel.org/r/20230227131053.BD779C433D2@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull ARM SoC fixes from Arnd Bergmann:
 "A few bugfixes already came up during the merge window. Samsung,
  ASpeed, Spear have minor DT changes, in case of Samsung this fixes a
  regression compared to earlier versions.

  Bartosz takes over as the primary maintainer for the TI DaVinci
  platform, and we get a few last minute defconfig changes"

* tag 'arm-fixes-6.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
  ARM: dts: spear320-hmi: correct STMPE GPIO compatible
  ARM: dts: aspeed: p10bmc: Update battery node name
  arm64: defconfig: Add IOSCHED_BFQ to the default configs
  arm64: defconfig: Fix unintentional disablement of PCI on i.MX
  ARM: dts: exynos: correct TMU phandle in Odroid XU3 family
  ARM: dts: exynos: correct TMU phandle in Odroid HC1
  ARM: dts: exynos: correct TMU phandle in Odroid XU
  ARM: dts: exynos: correct TMU phandle in Exynos5250
  ARM: dts: exynos: correct TMU phandle in Exynos4210
  ARM: dts: exynos: correct TMU phandle in Exynos4
  MAINTAINERS: make me the maintainer of DaVinci platforms

Pull ARM SoC driver updates from Arnd Bergmann:
 "As usual, there are lots of minor driver changes across SoC platforms
  from NXP, Amlogic, AMD Zynq, Mediatek, Qualcomm, Apple and Samsung.
  These usually add support for additional chip variations in existing
  drivers, but also add features or bugfixes.

  The SCMI firmware subsystem gains a unified raw userspace interface
  through debugfs, which can be used for validation purposes.

  Newly added drivers include:

   - New power management drivers for StarFive JH7110, Allwinner D1 and
     Renesas RZ/V2M

   - A driver for Qualcomm battery and power supply status

   - A SoC device driver for identifying Nuvoton WPCM450 chips

   - A regulator coupler driver for Mediatek MT81xxv"

* tag 'soc-drivers-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits)
  power: supply: Introduce Qualcomm PMIC GLINK power supply
  soc: apple: rtkit: Do not copy the reg state structure to the stack
  soc: sunxi: SUN20I_PPU should depend on PM
  memory: renesas-rpc-if: Remove redundant division of dummy
  soc: qcom: socinfo: Add IDs for IPQ5332 and its variant
  dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its variant
  dt-bindings: power: qcom,rpmpd: add RPMH_REGULATOR_LEVEL_LOW_SVS_L1
  firmware: qcom_scm: Move qcom_scm.h to include/linux/firmware/qcom/
  MAINTAINERS: Update qcom CPR maintainer entry
  dt-bindings: firmware: document Qualcomm SM8550 SCM
  dt-bindings: firmware: qcom,scm: add qcom,scm-sa8775p compatible
  soc: qcom: socinfo: Add Soc IDs for IPQ8064 and variants
  dt-bindings: arm: qcom,ids: Add Soc IDs for IPQ8064 and variants
  soc: qcom: socinfo: Add support for new field in revision 17
  soc: qcom: smd-rpm: Add IPQ9574 compatible
  soc: qcom: pmic_glink: remove redundant calculation of svid
  soc: qcom: stats: Populate all subsystem debugfs files
  dt-bindings: soc: qcom,rpmh-rsc: Update to allow for generic nodes
  soc: qcom: pmic_glink: add CONFIG_NET/CONFIG_OF dependencies
  soc: qcom: pmic_glink: Introduce altmode support
  ...

Pull fuse updates from Miklos Szeredi:

 - Fix regression in fileattr permission checking

 - Fix possible hang during PID namespace destruction

 - Add generic support for request extensions

 - Add supplementary group list extension

 - Add limited support for supplying supplementary groups in create
   requests

 - Documentation fixes

* tag 'fuse-update-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add inode/permission checks to fileattr_get/fileattr_set
  fuse: fix all W=1 kernel-doc warnings
  fuse: in fuse_flush only wait if someone wants the return code
  fuse: optional supplementary group in create requests
  fuse: add request extension

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Extend slot-gpio to be used for host specific card detect interrupts
   - Align to common busy polling behaviour for mmc ioctls
   - Suggest the BFQ I/O scheduler to be built along with MMC/SD support
   - Add devm_mmc_alloc_host() to enable further cleanups in host drivers

  MMC host:
   - atmel-mci: Fix race condition when stopping/starting a command
   - dw_mmc-starfive: Add new driver to support the StarFive JH7110 variant
   - dw_mmc-rockchip: Add support for the RK3588 variant
   - jz4740: Add support for the vqmmc power supply
   - meson-gx: Convert the DT bindings to the dt-schema
   - meson-gx: Enable the platform interrupt to be used for card detect
   - moxart: Set the supported maximum request/block/segment sizes
   - renesas,sdhi: Add support for the RZ/V2M variants
   - sdhci: Rework code to drop SDHCI_QUIRK_MISSING_CAPS
   - sdhci-esdhc-imx: Improve tuning logic support
   - sdhci-msm: Add support for the IPQ5332 and the IPQ9574 variants
   - sdhci-of-dwcmshc: Add the missing device table IDs for acpi
   - sdhci-of-dwcmshc: Improve clock support for the Rockchip variant
   - sdhci-of-dwcmshc: Enable support of V4 host for the BlueField-3 variant
   - sdhci-pxav2: Add support for the PXA168 V1 variant
   - sdhci-pxav2: Add support for SDIO IRQs for the PXA168 V1 variant
   - uniphier-sd: Add support for SD UHS-I speed modes"

* tag 'mmc-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
  mmc: meson-gx: Use devm_platform_get_and_ioremap_resource()
  mmc: meson-gx: constify member data of struct meson_host
  mmc: meson-gx: use devm_clk_get_enabled() for core clock
  mmc: core: fix return value check in devm_mmc_alloc_host()
  dt-bindings: mmc: meson-gx: fix interrupt binding
  mmc: meson-gx: support platform interrupt as card detect interrupt
  dt-bindings: mmc: meson-gx: support specifying cd interrupt
  mmc: core: support setting card detect interrupt from drivers
  mmc: starfive: Add sdio/emmc driver support
  dt-bindings: mmc: Add StarFive MMC module
  dt-bindings: mmc: sdhci-msm: Allow 1 icc path
  dt-bindings: mmc: rockchip-dw-mshc: Add RK3588 compatible string
  mmc: core: Align to common busy polling behaviour for mmc ioctls
  dt-bindings: mmc: Add resets property to cadence SDHCI binding
  mmc: meson-gx: remove meson_mmc_get_cd
  mmc: moxart: set maximum request/block/segment sizes
  mmc: sdhci-brcmstb: Use devm_platform_get_and_ioremap_resource()
  mmc: sdhci-of-dwcmshc: add the missing device table IDs for acpi
  mmc: sdhci-of-dwcmshc: Update DLL and pre-change delay for rockchip platform
  mmc: jz4740: Add support for vqmmc power supply
  ...

Pull dma-mapping updates from Christoph Hellwig:

 - remove a not very useful and now unused swiotlb API (Christoph
   Hellwig)

 - fix a section mismatch (Randy Dunlap)

* tag 'dma-mapping-6.3-2022-02-27' of git://git.infradead.org/users/hch/dma-mapping:
  swiotlb: mark swiotlb_memblock_alloc() as __init
  swiotlb: remove swiotlb_max_segment

Pull memblock updates from Mike Rapoport:
 "Small optimizations:

   - fix off-by-one in the check whether memblock_add_range() should
     reallocate memory to accommodate newly inserted range

   - check only for relevant regions in memblock_merge_regions() rather
     than swipe over the entire array"

* tag 'memblock-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  memblock: Avoid useless checks in memblock_merge_regions().
  memblock: Make a boundary tighter in memblock_add_range().

Pull m68knommu updates from Greg Ungerer:

 - spelling fixes

* tag 'm68knommu-for-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: nommu: Fix misspellings of "DragonEngine"
  m68k: nommu: Fix misspellings of "uCdimm"

Pull csky update from Guo Ren:

 - Optimize delay accuracy

* tag 'csky-for-linus-6.3' of https://github.com/c-sky/csky-linux:
  csky: delay: Add function alignment