- 25 Aug, 2023 1 commit
-
-
Martin K. Petersen authored
Igor Pylypiv <ipylypiv@google.com> says: This patch series plumbs libata's request for a result taskfile (ATA_QCFLAG_RESULT_TF) through libsas to pm80xx LLDD. Other libsas LLDDs can start using the newly added return_fis_on_success as well, if needed. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). pm80xx HBAs do not return FIS on success by default, hence, the driver is updated to set the RETFIS bit (Return FIS on good completion) when requested by libsas. Link: https://lore.kernel.org/r/20230819213040.1101044-1-ipylypiv@google.comSigned-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
- 21 Aug, 2023 24 commits
-
-
Mike Christie authored
The write back throttling (WBT) code checks if REQ_SYNC | REQ_IDLE is set to determine if a write is O_DIRECT vs buffered. If the bits are not set then it assumes it's a buffered write and will throttle LIO if we hit certain metrics. LIO itself is not using the buffer cache and is doing direct I/O, so this has us set the direct bits so we are not throttled. When the initiator application is doing direct I/O this can greatly improve performance. It depends on the backend device but we have seen where the WBT code is throttling writes to only 20K IOPs with 4K I/Os when the device can support 100K+. Signed-off-by:
Mike Christie <michael.christie@oracle.com> Link: https://lore.kernel.org/r/20230817192902.346791-1-michael.christie@oracle.comSigned-off-by:
-
Andy Shevchenko authored
The lpfc_vmid_host_uuid is not defined as uuid_t and its usage is not the same as for uuid_t operations (like exporting or importing). Hence replace call to uuid_is_null() by respective memchr_inv() without abusing casting. With that, replace LPFC_COMPRESS_VMID_SIZE with plain number and respective sizeof() to make code robust to changes in the future, if any. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230818155452.875781-1-andriy.shevchenko@linux.intel.comReviewed-by:
Justin Tee <justin.tee@broadcom.com> Signed-off-by:
-
Yue Haibing authored
Commit 4fcf812c ("[SCSI] libsas: export sas_alloc_task()") removed these implementations but not the declarations. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20230818124700.49724-1-yuehaibing@huawei.comReviewed-by:
Bart Van Assche <bvanassche@acm.org> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
-
Chengfeng Ye authored
There is a long call chain that &fip->ctlr_lock is acquired by isr fnic_isr_msix_wq_copy() under hard IRQ context. Thus other process context code acquiring the lock should disable IRQ, otherwise deadlock could happen if the IRQ preempts the execution while the lock is held in process context on the same CPU. [ISR] fnic_isr_msix_wq_copy() -> fnic_wq_copy_cmpl_handler() -> fnic_fcpio_cmpl_handler() -> fnic_fcpio_flogi_reg_cmpl_handler() -> fnic_flush_tx() -> fnic_send_frame() -> fcoe_ctlr_els_send() -> spin_lock_bh(&fip->ctlr_lock) [Process Context] 1. fcoe_ctlr_timer_work() -> fcoe_ctlr_flogi_send() -> spin_lock_bh(&fip->ctlr_lock) 2. fcoe_ctlr_recv_work() -> fcoe_ctlr_recv_handler() -> fcoe_ctlr_recv_els() -> fcoe_ctlr_announce() -> spin_lock_bh(&fip->ctlr_lock) 3. fcoe_ctlr_recv_work() -> fcoe_ctlr_recv_handler() -> fcoe_ctlr_recv_els() -> fcoe_ctlr_flogi_retry() -> spin_lock_bh(&fip->ctlr_lock) 4. -> fcoe_xmit() -> fcoe_ctlr_els_send() -> spin_lock_bh(&fip->ctlr_lock) spin_lock_bh() is not enough since fnic_isr_msix_wq_copy() is a hardirq. These flaws were found by an experimental static analysis tool I am developing for irq-related deadlock. The patch fix the potential deadlocks by spin_lock_irqsave() to disable hard irq. Fixes: 794d98e7 ("[SCSI] libfcoe: retry rejected FLOGI to another FCF if possible") Signed-off-by:
Chengfeng Ye <dg573847474@gmail.com> Link: https://lore.kernel.org/r/20230817074708.7509-1-dg573847474@gmail.comReviewed-by:
Davidlohr Bueso <dave@stgolabs.net> Signed-off-by:
-
Rajeshwar R Shinde authored
In the function sli_xmit_bls_rsp64_wqe(), the 'if' and 'else' conditions evaluates the same expression and give the same output. Also, params->s_id shall not be equal to U32_MAX. Remove the unused code. This fixes coccinelle warning such as: drivers/scsi/elx/libefc_sli/sli4.c:2320:2-4: WARNING: possible condition with no effect (if == else) Signed-off-by:
Rajeshwar R Shinde <coolrrsh@gmail.com> Link: https://lore.kernel.org/r/20230817114301.17601-1-coolrrsh@gmail.comReviewed-by:
Ram Vegesna <ram.vegesna@broadcom.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Gustavo A. R. Silva authored
One-element and zero-length arrays are deprecated. So, replace one-element array in struct fc_rscn_pl_s with flexible-array member. This results in no differences in binary output. Link: https://github.com/KSPP/linux/issues/339Signed-off-by:
"Gustavo A. R. Silva" <gustavoars@kernel.org> Link: https://lore.kernel.org/r/ZN0VTpDBOSVHGayb@workReviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Yue Haibing authored
These declarations are not used anymore, remove them. Signed-off-by:
-
Zheng Zengkai authored
PCI core API pci_dev_id() can be used to get the BDF number for a PCI device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by:
Zheng Zengkai <zhengzengkai@huawei.com> Link: https://lore.kernel.org/r/20230811111310.32364-1-zhengzengkai@huawei.comSigned-off-by:
-
Igor Pylypiv authored
By default PM80xx HBAs return FIS only when a drive reports an error. The RETFIS bit forces the controller to populate FIS even when a drive reports no error. Signed-off-by:
Igor Pylypiv <ipylypiv@google.com> Link: https://lore.kernel.org/r/20230819213040.1101044-3-ipylypiv@google.comReviewed-by:
Niklas Cassel <niklas.cassel@wdc.com> Reviewed-by:
Damien Le Moal <dlemoal@kernel.org> Signed-off-by:
-
Igor Pylypiv authored
Set return_fis_on_success when libata requests result taskfile. For Command Duration Limits policy 0xD (command completes without an error) libata needs FIS in order to detect the ATA_SENSE bit and read the Sense Data for Successful NCQ Commands log (0Fh). Signed-off-by:
-
Jialin Zhang authored
PCI core API pci_dev_id() can be used to get the BDF number for a PCI device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by:
Jialin Zhang <zhangjialin11@huawei.com> Link: https://lore.kernel.org/r/20230815025419.3523236-4-zhangjialin11@huawei.comSigned-off-by:
-
Jialin Zhang authored
PCI core API pci_dev_id() can be used to get the BDF number for a PCI device. We don't need to compose it manually. Use pci_dev_id() to simplify the code a little bit. Signed-off-by:
-
Jialin Zhang authored
PCI core API pci_dev_id() can be used to get the BDF number for a PCI device. We don't need to compose it mannally. Use pci_dev_id() to simplify the code a little bit. Signed-off-by:
-
Brian Masney authored
Convert ufshcd_pltfrm_init() over to use dev_err_probe() to avoid the following log message on bootup due to an -EPROBE_DEFER return code: ufshcd-qcom 1d84000.ufs: Initialization failed While this line is changed, let's also go ahead and add the error code to the message as well. Signed-off-by:Brian Masney <bmasney@redhat.com> Link: https://lore.kernel.org/r/20230814184352.200531-3-bmasney@redhat.comReviewed-by:
"Bao D. Nguyen" <quic_nguyenb@quicinc.com> Signed-off-by:
-
Brian Masney authored
Convert ufshcd_variant_hba_init() over to use dev_err_probe() to avoid log messages like the following on bootup: ufshcd-qcom 1d84000.ufs: ufshcd_variant_hba_init: variant qcom init failed err -517 Signed-off-by: -
Tony Battersby authored
Change scsi_host_lookup() hostnum argument type from unsigned short to unsigned int to match the type used everywhere else. Fixes: 6d49f63b ("[SCSI] Make host_no an unsigned int") Signed-off-by:
Tony Battersby <tonyb@cybernetics.com> Link: https://lore.kernel.org/r/a02497e7-c12b-ef15-47fc-3f0a0b00ffce@cybernetics.comReviewed-by:
-
Artem Chernyshev authored
To properly manage possible failure of sas_register_ha() in isci_register_sas_ha(), return its result instead of zero Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by:
Artem Chernyshev <artem.chernyshev@red-soft.ru> Link: https://lore.kernel.org/r/20230813202336.240874-1-artem.chernyshev@red-soft.ruReviewed-by:
Artur Paszkiewicz <artur.paszkiewicz@intel.com> Signed-off-by:
-
Arnd Bergmann authored
This function has no declaration, which causes a warning: drivers/scsi/gvp11.c:53:6: error: no previous prototype for 'gvp11_setup' [-Werror=missing-prototypes] Since there is also no caller, just remove the function. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20230810141947.1236730-12-arnd@kernel.orgReviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmer@rivosinc.com> # RISC-V Signed-off-by:
-
Arnd Bergmann authored
The qlogicpti_info() function is only used in this file and should be static to avoid a warning: drivers/scsi/qlogicpti.c:846:13: error: no previous prototype for 'qlogicpti_info' [-Werror=missing-prototypes] Signed-off-by:
-
Alex Henrie authored
I have an Iomega Z100P2 zip drive, but it does not work with my StarTech PEX1P2 AX99100 PCIe parallel port, which evidently does not support 16-bit or 32-bit EPP. Currently the only way to tell the PPA driver to use 8-bit EPP is to write 'mode=3' to /proc/scsi/ppa/*, but the driver doesn't actually distinguish between the three EPP modes and still tries to use 16-bit or 32-bit EPP. And even if writing to that file did make the driver use 8-bit EPP, it still wouldn't do me any good because by the time that file exists, the drive has already failed to initialize. Add a new parameter /sys/module/ppa/mode to set the transfer mode before initializing the drive. This parameter replaces the use of CONFIG_SCSI_IZIP_EPP16 in the PPA driver. At the same time, default to 8-bit EPP. 16-bit and 32-bit EPP are not necessary for the drive to function, nor are they part of the IEEE 1284 standard, so the driver should not assume that they are available. Signed-off-by:
Alex Henrie <alexhenrie24@gmail.com> Link: https://lore.kernel.org/r/20230807155856.362864-2-alexhenrie24@gmail.comSigned-off-by:
-
Alex Henrie authored
Fix a regression introduced in February 2003 in Linux 2.5.61 by a patch from Alan Cox titled "fix ppa for new scsi".[1] Link: https://lore.kernel.org/lkml/E18jn1B-0005gQ-00@the-village.bc.nu/Signed-off-by:
-
Xiang Yang authored
Add __init and __exit for arcmsr_module_{init,exit}(). Signed-off-by:Xiang Yang <xiangyang3@huawei.com> Link: https://lore.kernel.org/r/20230804022913.1917023-1-xiangyang3@huawei.comSigned-off-by:
-
Yue Haibing authored
These functions have never been implemented since the beginning of git history. Signed-off-by:
-
Yue Haibing authored
Commit 042ebd29 ("scsi: libsas: kill useless ha_event and do some cleanup") removed sas_hae_reset() but not its declaration. Commit 2908d778 ("[SCSI] aic94xx: new driver") declared but never implemented other functions. Signed-off-by:
John Garry <john.g.garry@oracle.com> Reviewed-by:
Jason Yan <yanaijie@huawei.com> Signed-off-by:
-
- 08 Aug, 2023 13 commits
-
-
Jeuk Kim authored
To ensure that the PCI based QEMU UFS device properly works with Linux, register the device ID (0x0013) and vendor ID (0x1b36) of QEMU UFS device. QEMU UFS will enable testing of the UFS driver inside a virtual machine on systems without UFS host controller. It can also be used to preemptively implement and test new features before the real device is created. The new QEMU UFS device can be found at: https://lore.kernel.org/qemu-devel/20230727155239.GA979354@fedoraSigned-off-by:
Jeuk Kim <jeuk20.kim@samsung.com> Link: https://lore.kernel.org/r/20230807013726epcms2p1c604cb8e98680aebebb7cc5ab2d580f5@epcms2p1Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
-
Martin K. Petersen authored
Ranjan Kumar <ranjan.kumar@broadcom.com> says: Few Enhancements and minor fixes of mpi3mr driver. Link: https://lore.kernel.org/r/20230804104248.118924-1-ranjan.kumar@broadcom.comSigned-off-by:
-
Ranjan Kumar authored
Update driver version to 8.5.0.0.0 Signed-off-by:
Ranjan Kumar <ranjan.kumar@broadcom.com> Link: https://lore.kernel.org/r/20230804104248.118924-7-ranjan.kumar@broadcom.comSigned-off-by:
-
Ranjan Kumar authored
Mark all of the devices that are exposed to the OS prior to a controller reset and not detected by the controller after the reset as removed devices and the I/Os to those devices are unblocked (and returned with DID_NO_CONNECT) prior to removing the devices one after the other. Signed-off-by:
-
Ranjan Kumar authored
Enhance driver to divert the WRITE SAME commands that are issued with UNMAP=1 and NDOB=1 and with the transfer length greater than the max WRITE SAME length specified by the firmware for the particular drive to the controller firmware. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202307280034.DXU5pTVV-lkp@intel.com/Signed-off-by:
-
Ranjan Kumar authored
Enhance the driver to get the maximum data length per I/O request from IOC Facts data and report that to the upper layers. If the IOC facts data is not reported then a default I/O size of 1MB is reported to the OS. Signed-off-by:
-
Ranjan Kumar authored
Updated MPI Headers to version 3.00.28. Signed-off-by:
-
Ranjan Kumar authored
When a timestamp update or an event acknowledgment command times out, the driver invokes the soft reset handler to recover the controller while holding a mutex lock. The soft reset handler also tries to acquire the same mutex to send initialization commands to the controller which leads to a deadlock scenario. To resolve the issue the driver will check thestatus and if this indicates the controller is operational, the driver will issue a diagnostic fault reset and exit out of the command processing function. If the controller is already faulted or asynchronously reset, then the driver will just exit the command processing function. Signed-off-by:
-
Justin Tee authored
Only nodes whose state is at least past a PLOGI issue and strictly less than a PRLI issue should be put into device recovery mode upon RSCN receipt. Previously, the allowance of LOGO and PRLI completion states did not make sense because those nodes should be allowed to flow through and marked as NPort dissappeared as is normally done. A follow up RSCN GID_FT would recover those nodes in such cases. Signed-off-by:
-
Manivannan Sadhasivam authored
ufs_qcom_bw_table is not modified anywhere. So make it static const so that it can be placed in read-only memory. Reported-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20230802040154.10652-1-manivannan.sadhasivam@linaro.orgReviewed-by:
-
Bart Van Assche authored
gcc compilers before version 10 cannot do constant-folding for sub-byte bitfields. This makes the compiler layout tests fail. Hence skip the layout checks for gcc 9 and before. Cc: Arnd Bergmann <arnd@arndb.de> Cc: Naresh Kamboju <naresh.kamboju@linaro.org> Cc: Nathan Chancellor <nathan@kernel.org> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Closes: https://lore.kernel.org/linux-scsi/CA+G9fYur8UJoUyTLJFVEJPh-15TJ7kbdD2q8xVz8a3fLjkxxVw@mail.gmail.com/Suggested-by:
-
Nitin Rawat authored
Commit 52a51801 ("scsi: ufs: core: Fix missing clk change notification on host reset") added UFS clock scaling notification to ufshcd_host_reset_and_restore(). This invokes hibern8 enter and exit on Qualcomm platform which fails because controller is in reset state. Fix this by checking the Host controller state before sending hibern8 command. __ufshcd_wl_resume() ufshcd_reset_and_restore() ufshcd_host_reset_and_restore() ufshcd_scale_clks() ufshcd_vops_clk_scale_notify() ufs_qcom_clk_scale_notify() ufshcd_uic_hibern8_enter() Fixes: 52a51801 ("scsi: ufs: core: Fix missing clk change notification on host reset") Co-developed-by:
Manish Pandey <quic_mapa@quicinc.com> Signed-off-by:
Nitin Rawat <quic_nitirawa@quicinc.com> Link: https://lore.kernel.org/r/20230726134140.7180-3-quic_nitirawa@quicinc.comAcked-by:
Manivannan Sadhasivam <mani@kernel.org> Signed-off-by:
-
Nitin Rawat authored
Export ufshcd_is_hba_active() to allow driver modules to check the state of the host controller. Signed-off-by:
-
- 31 Jul, 2023 2 commits
-
-
Martin K. Petersen authored
Bart Van Assche <bvanassche@acm.org> says: Hi Martin, This patch includes the following changes, none of which should change the functionality of the UFS host controller driver: - Improve the kernel-doc headers further. - Fix multiple W=2 compiler warnings. - Simplify ufshcd_abort_all(). - Simplify the code for creating and parsing UFS Transport Protocol (UTP) headers. Please consider this patch series for the next merge window. Thanks, Bart. Link: https://lore.kernel.org/r/20230727194457.3152309-1-bvanassche@acm.orgSigned-off-by:
-
Bart Van Assche authored
Make the code that parses UTP transfer request headers easier to read by using u8 instead of __be32 where appropriate. Signed-off-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
