This is essentially a stripped down version of the W83627DHG. Noticeable
difference is that it is still powered with +5V, as older models, even
though the ADC resolution is 8 mV as newer models have.

Thanks to Ulf Bruman (Saab Group) for doing all the testing.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

The probe function has grown pretty large, I think it's time for some
cleanups, starting with these two simple ones:
* Move temp3/in6 check for the W83667HG later in the function, where
  it is done for all other chip types.
* Move temperature register setting to a separate function, to avoid
  code duplication.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

When temperature sources are PECI or AMD-SI agents, it makes no sense
to report their type as diode or thermistor. Instead we must report
their digital nature.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Make use of the new i2c_smbus_{read,write}_word_swapped functions.
This makes the driver code more compact and readable. It also ensures
proper error handling.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Jonathan Cameron <jic23@cam.ac.uk>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: "Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: Guillaume Ligneul <guillaume.ligneul@gmail.com>

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Clean up the code to make it more readable:
* Remove reg_ and new_ prefixes from variable names, they made the
  names longer, causing extra line breaks, while not adding much
  value.
* Introduce struct device dev* = &client->dev in two functions, to
  avoid repeating client->dev everywhere in these functions.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

With some configuration option combinations, we get the following
warnings:

drivers/hwmon/lm90.c: In function 'lm90_detect':
drivers/hwmon/lm90.c:1114: warning: 'chip_id' may be used uninitialized
in this function
drivers/hwmon/lm90.c:1114: warning: 'reg_config1' may be used
uninitialized in this function
drivers/hwmon/lm90.c:1114: warning: 'reg_convrate' may be used
uninitialized in this function
drivers/hwmon/lm90.c:1187: warning: 'reg_emerg2' may be used
uninitialized in this function
drivers/hwmon/lm90.c:1187: warning: 'reg_status2' may be used
uninitialized in this function

We can solve these easily by reading the register values first and
checking for errors later. These errors should be very rare, even in
the case of failed detection, so this change has no impact on
performance. And this makes checkpatch.pl happier.
Reported-by: Guenter Roeck <guenter.roeck@ericsson.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Preallocate a buffer for the response to sensor reads, and reuse it
for each read instead of allocating a new one each time. This should
be faster and should also avoid memory fragmentation.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

There is no good reason that I can see why the failure to initialize
one instance should prevent other instances from being initialized.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

I am under the impression that error paths in functions
aem_init_aem1_inst() and aem_init_aem2_inst() are incorrect. In
several cases, the function returns 0 on error, which I suspect is
not intended. Fix this by properly tracking error codes.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>

Word reads can cause trouble with some I2C devices, so do as much
detection as we can using only byte reads, and only use a word read in
the end to confirm the positive match. Also properly handle read
errors.
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: Robert Casanova <robertcasanova@nanometrics.ca>

A modprobe of hwmon drivers that read/write ISA addresses on a powerpc results
in a kernel Oops. These reads/writes are being done via the inb()/in_8() and
outb()/out_8() macros.

Prevent these drivers from being built for powerpc.
Signed-off-by: Dean Nelson <dnelson@redhat.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: Assume passwords are encoded according to iocharset (try #2)
  CIFS: Fix the VFS brlock cache usage in posix locking case
  [CIFS] Update cifs version to 1.76
  CIFS: Remove extra mutex_unlock in cifs_lock_add_if

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits)
  be2net: Add detect UE feature for Lancer
  be2net: Prevent CQ full condition for Lancer
  be2net: Fix disabling multicast promiscous mode
  be2net: Fix endian issue in RX filter command
  af_packet: de-inline some helper functions
  MAINTAINERS: Add can-gw include to maintained files
  net: Add back alignment for size for __alloc_skb
  net: add missing bh_unlock_sock() calls
  l2tp: fix race in l2tp_recv_dequeue()
  ixgbevf: Update release version
  ixgbe: DCB, return max for IEEE traffic classes
  ixgbe: fix reading of the buffer returned by the firmware
  ixgbe: Fix compiler warnings
  ixgbe: fix smatch splat due to missing NULL check
  ixgbe: fix disabling of Tx laser at probe
  ixgbe: Fix link issues caused by a reset while interface is down
  igb: Fix for I347AT4 PHY cable length unit detection
  e100: make sure vlan support isn't advertised on old adapters
  e1000e: demote a debugging WARN to a debug log message
  net: fix typo in drivers/net/ethernet/xilinx/ll_temac_main.c
  ...

Add code to detect UE in case of Lancer.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Indicate to HW that the CQ is cleaned up before posting new RX buffers.
This prevents the HW to go into CQ full error condition.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If user tries to disable multicast promiscous mode, the adapter remains
in this mode as resetting the multicast promiscous mode was missing
in RX filter command. Fixed this.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use cpu_to_le32() for mcast_num field in RX filter command as this
field is of type u32.
Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This popped some compiler errors due to mismatched prototypes. Just
remove most manual inlines, the compiler should be able to figure out
what makes sense to inline and not.

net/packet/af_packet.c:252: warning: 'prb_curr_blk_in_use' declared inline after being called
net/packet/af_packet.c:252: warning: previous declaration of 'prb_curr_blk_in_use' was here
net/packet/af_packet.c:258: warning: 'prb_queue_frozen' declared inline after being called
net/packet/af_packet.c:258: warning: previous declaration of 'prb_queue_frozen' was here
net/packet/af_packet.c:248: warning: 'packet_previous_frame' declared inline after being called
net/packet/af_packet.c:248: warning: previous declaration of 'packet_previous_frame' was here
net/packet/af_packet.c:251: warning: 'packet_increment_head' declared inline after being called
net/packet/af_packet.c:251: warning: previous declaration of 'packet_increment_head' was here
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Chetan Loke <loke.chetan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit c1aabdf3 (can-gw: add netlink based
CAN routing) added a new include file that's neither referenced by any of
the CAN maintainers.
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 87fb4b7b (net: more
accurate skb truesize) changed the alignment of size. This
can cause problems at least on some machines with NFS root:

Unhandled fault: alignment exception (0x801) at 0xc183a43a
Internal error: : 801 [#1] PREEMPT
Modules linked in:
CPU: 0    Not tainted  (3.1.0-08784-g5eeee4a #733)
pc : [<c02fbba0>]    lr : [<c02fbb9c>]    psr: 60000013
sp : c180fef8  ip : 00000000  fp : c181f580
r10: 00000000  r9 : c044b28c  r8 : 00000001
r7 : c183a3a0  r6 : c1835be0  r5 : c183a412  r4 : 000001f2
r3 : 00000000  r2 : 00000000  r1 : ffffffe6  r0 : c183a43a
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
Control: 0005317f  Table: 10004000  DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc180e270)
Stack: (0xc180fef8 to 0xc1810000)
fee0:                                                       00000024 00000000
ff00: 00000000 c183b9c0 c183b8e0 c044b28c c0507ccc c019dfc4 c180ff2c c0503cf8
ff20: c180ff4c c180ff4c 00000000 c1835420 c182c740 c18349c0 c05233c0 00000000
ff40: 00000000 c00e6bb8 c180e000 00000000 c04dd82c c0507e7c c050cc18 c183b9c0
ff60: c05233c0 00000000 00000000 c01f34f4 c0430d70 c019d364 c04dd898 c04dd898
ff80: c04dd82c c0507e7c c180e000 00000000 c04c584c c01f4918 c04dd898 c04dd82c
ffa0: c04ddd28 c180e000 00000000 c0008758 c181fa60 3231d82c 00000037 00000000
ffc0: 00000000 c04dd898 c04dd82c c04ddd28 00000013 00000000 00000000 00000000
ffe0: 00000000 c04b2224 00000000 c04b21a0 c001056c c001056c 00000000 00000000
Function entered at [<c02fbba0>] from [<c019dfc4>]
Function entered at [<c019dfc4>] from [<c01f34f4>]
Function entered at [<c01f34f4>] from [<c01f4918>]
Function entered at [<c01f4918>] from [<c0008758>]
Function entered at [<c0008758>] from [<c04b2224>]
Function entered at [<c04b2224>] from [<c001056c>]
Code: e1a00005 e3a01028 ebfa7cb0 e35a0000 (e5858028)

Here PC is at __alloc_skb and &shinfo->dataref is unaligned because
skb->end can be unaligned without this patch.

As explained by Eric Dumazet <eric.dumazet@gmail.com>, this happens
only with SLOB, and not with SLAB or SLUB:

* Eric Dumazet <eric.dumazet@gmail.com> [111102 15:56]:
>
> Your patch is absolutely needed, I completely forgot about SLOB :(
>
> since, kmalloc(386) on SLOB gives exactly ksize=386 bytes, not nearest
> power of two.
>
> [   60.305763] malloc(size=385)->ffff880112c11e38 ksize=386 -> nsize=2
> [   60.305921] malloc(size=385)->ffff88007c92ce28 ksize=386 -> nsize=2
> [   60.306898] malloc(size=656)->ffff88007c44ad28 ksize=656 -> nsize=272
> [   60.325385] malloc(size=656)->ffff88007c575868 ksize=656 -> nsize=272
> [   60.325531] malloc(size=656)->ffff88011c777230 ksize=656 -> nsize=272
> [   60.325701] malloc(size=656)->ffff880114011008 ksize=656 -> nsize=272
> [   60.346716] malloc(size=385)->ffff880114142008 ksize=386 -> nsize=2
> [   60.346900] malloc(size=385)->ffff88011c777690 ksize=386 -> nsize=2
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Kirby reported lockdep warnings and following messages :

[104661.897577] huh, entered softirq 3 NET_RX ffffffff81613740
preempt_count 00000101, exited with 00000102?

[104661.923653] huh, entered softirq 3 NET_RX ffffffff81613740
preempt_count 00000101, exited with 00000102?

Problem comes from commit 0e734419
(ipv4: Use inet_csk_route_child_sock() in DCCP and TCP.)

If inet_csk_route_child_sock() returns NULL, we should release socket
lock before freeing it.

Another lock imbalance exists if __inet_inherit_port() returns an error
since commit 093d2823 ( tproxy: fix hash locking issue when using
port redirection in __inet_inherit_port()) a backport is also needed for
>= 2.6.37 kernels.
Reported-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Tested-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Balazs Scheidler <bazsi@balabit.hu>
CC: KOVACS Krisztian <hidden@balabit.hu>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Simon Kirby <sim@hostway.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>

Misha Labjuk reported panics occurring in l2tp_recv_dequeue()

If we release reorder_q.lock, we must not keep a dangling pointer (tmp),
since another thread could manipulate reorder_q.

Instead we must restart the scan at beginning of list.
Reported-by: Misha Labjuk <spiked.yar@gmail.com>
Tested-by: Misha Labjuk <spiked.yar@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits)
  MIPS: O32: Provide definition of registers ta0 .. ta3.
  MIPS: perf: Add Octeon support for hardware perf.
  MIPS: perf: Add support for 64-bit perf counters.
  MIPS: perf: Reorganize contents of perf support files.
  MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c
  MIPS: Add accessor macros for 64-bit performance counter registers.
  MIPS: Add probes for more Octeon II CPUs.
  MIPS: Add more CPU identifiers for Octeon II CPUs.
  MIPS: XLR, XLS: Add comment for smp setup
  MIPS: JZ4740: GPIO: Check correct IRQ in demux handler
  MIPS: JZ4740: GPIO: Simplify IRQ demuxer
  MIPS: JZ4740: Use generic irq chip
  MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines
  MIPS: Alchemy: kill au1xxx.h header
  MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines
  MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep
  MIPS: Alchemy: Redo PCI as platform driver
  MIPS: Alchemy: more base address cleanup
  MIPS: Alchemy: rewrite USB platform setup.
  MIPS: Alchemy: abstract USB block control register access
  ...

Fix up trivial conflicts in:
	arch/mips/alchemy/devboards/db1x00/platform.c
	drivers/ide/Kconfig
	drivers/mmc/host/au1xmmc.c
	drivers/video/Kconfig
	sound/mips/Kconfig

The sb_edac driver is marginally useful on a 32-bit kernel, and
currently has 64-bit divide compile errors when building that config.
For now, make this build on only for 64-bit kernels.
Signed-off-by: Josh Boyer <jwboyer@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'next' of git://github.com/kernelslacker/cpufreq:
  [CPUFREQ] db8500: support all frequencies
  [CPUFREQ] db8500: remove unneeded for loop iteration over freq_table
  [CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders
  [CPUFREQ] ARM: ux500: send cpufreq notification for all cpus
  [CPUFREQ] e_powersaver: Allow user to lower maximum voltage
  [CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency
  [CPUFREQ] e_powersaver: Additional checks
  [CPUFREQ] exynos4210: Show list of available frequencies

* 'for-next' of git://git.infradead.org/users/sameo/mfd-2.6: (80 commits)
  mfd: Fix missing abx500 header file updates
  mfd: Add missing <linux/io.h> include to intel_msic
  x86, mrst: add platform support for MSIC MFD driver
  mfd: Expose TurnOnStatus in ab8500 sysfs
  mfd: Remove support for early drop ab8500 chip
  mfd: Add support for ab8500 v3.3
  mfd: Add ab8500 interrupt disable hook
  mfd: Convert db8500-prcmu panic() into pr_crit()
  mfd: Refactor db8500-prcmu request_clock() function
  mfd: Rename db8500-prcmu init function
  mfd: Fix db5500-prcmu defines
  mfd: db8500-prcmu voltage domain consumers additions
  mfd: db8500-prcmu reset code retrieval
  mfd: db8500-prcmu tweak for modem wakeup
  mfd: Add db8500-pcmu watchdog accessor functions for watchdog
  mfd: hwacc power state db8500-prcmu accessor
  mfd: Add db8500-prcmu accessors for PLL and SGA clock
  mfd: Move to the new db500 PRCMU API
  mfd: Create a common interface for dbx500 PRCMU drivers
  mfd: Initialize DB8500 PRCMU regs
  ...

Fix up trivial conflicts in
	arch/arm/mach-imx/mach-mx31moboard.c
	arch/arm/mach-omap2/board-omap3beagle.c
	arch/arm/mach-u300/include/mach/irqs.h
	drivers/mfd/wm831x-spi.c

* 'sh-latest' of git://github.com/pmundt/linux-sh:
  sh: Add default uImage rule for sh7757lcr
  sh: modify the asm/sh_eth.h to linux/sh_eth.h in sh7757lcr
  sh: userimask.c needs linux/stat.h
  sh: pfc: Add GPIO IRQ support
  sh: modify the asm/sh_eth.h to linux/sh_eth.h in some boards
  sh: pfc: Remove unused gpio_in_use member
  sh: add parameters for EHCI and RIIC in clock-sh7757.c
  sh: kexec: Add PHYSICAL_START
  SH: irq: Remove IRQF_DISABLED
  sh: pfc: get_config_reg() shift clean up
  sh: intc: Add IRQ trigger bit field check
  sh: drop unused Kconfig symbol
  sh: Fix implicit declaration of function numa_node_id
  sh: kexec: Register crashk_res
  sh: ecovec: add renesas_usbhs DMAEngine support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/hwspinlock:
  hwspinlock: add MAINTAINERS entries
  hwspinlock/omap: omap_hwspinlock_remove should be __devexit
  hwspinlock/u8500: add hwspinlock driver
  hwspinlock/core: register a bank of hwspinlocks in a single API call
  hwspinlock/core: remove stubs for register/unregister
  hwspinlock/core: use a mutex to protect the radix tree
  hwspinlock/core/omap: fix id issues on multiple hwspinlock devices
  hwspinlock/omap: simplify allocation scheme
  hwspinlock/core: simplify 'owner' handling
  hwspinlock/core: simplify Kconfig

Fix up trivial conflicts (addition of omap_hwspinlock_pdata, removal of
omap_spinlock_latency) in arch/arm/mach-omap2/hwspinlock.c

Also, do an "evil merge" to fix a compile error in omap_hsmmc.c which
for some reason was reported in the same email thread as the "please
pull hwspinlock changes".

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
  Revert "HID: multitouch: decide if hid-multitouch needs to handle mt devices"
  HID: drivers/hid/hid-roccat.c: eliminate a null pointer dereference
  HID: hid-apple: add device ID of another wireless aluminium
  HID: Add device IDs for Macbook Pro 8 keyboards

This reverts commit 144060fe.

It causes a resume regression for Andi on his Acer Aspire 1830T post
3.1.  The screen just stays black after wakeup.

Also, it really looks like the wrong way to suspend and resume perf
events: I think they should be done as part of the CPU suspend and
resume, rather than as a notifier that does smp_call_function().
Reported-by: Andi Kleen <andi@firstfloor.org>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/linux-dm:
  dm: raid fix device status indicator when array initializing
  dm log userspace: add log device dependency
  dm log userspace: fix comment hyphens
  dm: add thin provisioning target
  dm: add persistent data library
  dm: add bufio
  dm: export dm get md
  dm table: add immutable feature
  dm table: add always writeable feature
  dm table: add singleton feature
  dm kcopyd: add dm_kcopyd_zero to zero an area
  dm: remove superfluous smp_mb
  dm: use local printk ratelimit
  dm table: propagate non rotational flag

* 'for-linus' of git://git.selinuxproject.org/~jmorris/linux-security:
  TOMOYO: Fix interactive judgment functionality.

Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Returning the max traffic classes on get requests simplifies
user space configurations because applications will know
explicitly how many traffic classes can be used.

Typical switch implementations use 2 or 3 traffic classes
so this not seen often today. And user space can learn
the number of traffic classes by return codes but this
allows user space to configure ixgbe correctly at the
start.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

This patch fixes some issues found in the buffer read portion of
ixgbe_host_interface_command()

- use `bi` as the buffer index counter instead of `i`
- add conversion to native cpu byte ordering on register read
- fix conversion from bytes to dword
- use dword_len instead of buf_len when reading the register
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

Wrap SR-IOV specific functions in CONFIG_PCI_IOV to avoid compiler
warnings.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Tested-by: Sibai Li <sibai.li@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe_ieee_ets and ixgbe_ieee_pfc are intialized at
the same time. Do a check for both before configuring
IEEE802.1Qaz. Also max_frame was causing a sparse
warning resolved here as well.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Tested-by: Ross Brattain <ross.b.brattain@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

register_netdev() calls ndo_set_features() which may result in HW reset
which in turn will bring the laser back up.

This patch moves ixgbe_laser_tx_disable() below register_netdev()
in ixgbe_probe() to make sure laser is shut off on load.
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>