- 05 Oct, 2019 40 commits
-
-
Yufen Yu authored
[ Upstream commit 07f1a685 ] When run test case: mdadm -CR /dev/md1 -l 1 -n 4 /dev/sd[a-d] --assume-clean --bitmap=internal mdadm -S /dev/md1 mdadm -A /dev/md1 /dev/sd[b-c] --run --force mdadm --zero /dev/sda mdadm /dev/md1 -a /dev/sda echo offline > /sys/block/sdc/device/state echo offline > /sys/block/sdb/device/state sleep 5 mdadm -S /dev/md1 echo running > /sys/block/sdb/device/state echo running > /sys/block/sdc/device/state mdadm -A /dev/md1 /dev/sd[a-c] --run --force mdadm run fail with kernel message as follow: [ 172.986064] md: kicking non-fresh sdb from array! [ 173.004210] md: kicking non-fresh sdc from array! [ 173.022383] md/raid1:md1: active with 0 out of 4 mirrors [ 173.022406] md1: failed to create bitmap (-5) In fact, when active disk in raid1 array less than one, we need to return fail in raid1_run(). Reviewed-by:
NeilBrown <neilb@suse.de> Signed-off-by:
Yufen Yu <yuyufen@huawei.com> Signed-off-by:
Song Liu <songliubraving@fb.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wang Shenran authored
[ Upstream commit 6e4d91aa ] At boot time, the acpi_power_meter driver logs the following error level message: "Ignoring unsafe software power cap". Having read about it from a few sources, it seems that the error message can be quite misleading. While the message can imply that Linux is ignoring the fact that the system is operating in potentially dangerous conditions, the truth is the driver found an ACPI_PMC object that supports software power capping. The driver simply decides not to use it, perhaps because it doesn't support the object. The best solution is probably changing the log level from error to warning. All sources I have found, regarding the error, have downplayed its significance. There is not much of a reason for it to be on error level, while causing potential confusions or misinterpretations. Signed-off-by:
Wang Shenran <shenran268@gmail.com> Link: https://lore.kernel.org/r/20190724080110.6952-1-shenran268@gmail.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Kent Overstreet authored
[ Upstream commit a22a9602 ] The race was when a thread using closure_sync() notices cl->s->done == 1 before the thread calling closure_put() calls wake_up_process(). Then, it's possible for that thread to return and exit just before wake_up_process() is called - so we're trying to wake up a process that no longer exists. rcu_read_lock() is sufficient to protect against this, as there's an rcu barrier somewhere in the process teardown path. Signed-off-by:
Kent Overstreet <kent.overstreet@gmail.com> Acked-by:
Coly Li <colyli@suse.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 29b49958 ] In acpi_pci_irq_enable(), 'entry' is allocated by kzalloc() in acpi_pci_irq_check_entry() (invoked from acpi_pci_irq_lookup()). However, it is not deallocated if acpi_pci_irq_valid() returns false, leading to a memory leak. To fix this issue, free 'entry' before returning 0. Fixes: e237a551 ("x86/ACPI/PCI: Recognize that Interrupt Line 255 means "not connected"") Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 03d1571d ] In cm_write(), 'buf' is allocated through kzalloc(). In the following execution, if an error occurs, 'buf' is not deallocated, leading to memory leaks. To fix this issue, free 'buf' before returning the error. Fixes: 526b4af4 ("ACPI: Split out custom_method functionality into an own driver") Signed-off-by:
-
Marek Szyprowski authored
[ Upstream commit 5b0eeeaa ] Commit aff138bf ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards") assigned LDO10 to Exynos Thermal Measurement Unit, but it turned out that it supplies also some other critical parts and board freezes/crashes when it is turned off. The mentioned commit made Exynos TMU a consumer of that regulator and in typical case Exynos TMU driver keeps it enabled from early boot. However there are such configurations (example is multi_v7_defconfig), in which some of the regulators are compiled as modules and are not available from early boot. In such case it may happen that LDO10 is turned off by regulator core, because it has no consumers yet (in this case consumer drivers cannot get it, because the supply regulators for it are not yet available). This in turn causes the board to crash. This patch restores 'always-on' property for the LDO10 regulator. Fixes: aff138bf ("ARM: dts: exynos: Add TMU nodes regulator supply for Peach boards") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by:
-
Tzvetomir Stoyanov authored
[ Upstream commit e97fd138 ] To be compliant with XDG user directory layout, the user's plugin directory is changed from ~/.traceevent/plugins to ~/.local/lib/traceevent/plugins/ Suggested-by:
Patrick McLean <chutzpah@gentoo.org> Signed-off-by:
Tzvetomir Stoyanov <tstoyanov@vmware.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Patrick McLean <chutzpah@gentoo.org> Cc: linux-trace-devel@vger.kernel.org Link: https://lore.kernel.org/linux-trace-devel/20190313144206.41e75cf8@patrickm/ Link: http://lore.kernel.org/linux-trace-devel/20190801074959.22023-4-tz.stoyanov@gmail.com Link: http://lore.kernel.org/lkml/20190805204355.344622683@goodmis.orgSigned-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 0d87308c ] In commit 14bd9a60 ("iommu/iova: Separate atomic variables to improve performance") Jinyu Qi identified that the atomic_cmpxchg() in queue_iova() was causing a performance loss and moved critical fields so that the false sharing would not impact them. However, avoiding the false sharing in the first place seems easy. We should attempt the atomic_cmpxchg() no more than 100 times per second. Adding an atomic_read() will keep the cache line mostly shared. This false sharing came with commit 9a005a80 ("iommu/iova: Add flush timer"). Signed-off-by:
Eric Dumazet <edumazet@google.com> Fixes: 9a005a80 ('iommu/iova: Add flush timer') Cc: Jinyu Qi <jinyuqi@huawei.com> Cc: Joerg Roedel <jroedel@suse.de> Acked-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Dan Williams authored
[ Upstream commit c312ef17 ] The Linux ahci driver has historically implemented a configuration fixup for platforms / platform-firmware that fails to enable the ports prior to OS hand-off at boot. The fixup was originally implemented way back before ahci moved from drivers/scsi/ to drivers/ata/, and was updated in 2007 via commit 49f29090 "ahci: update PCS programming". The quirk sets a port-enable bitmap in the PCS register at offset 0x92. This quirk could be applied generically up until the arrival of the Denverton (DNV) platform. The DNV AHCI controller architecture supports more than 6 ports and along with that the PCS register location and format were updated to allow for more possible ports in the bitmap. DNV AHCI expands the register to 32-bits and moves it to offset 0x94. As it stands there are no known problem reports with existing Linux trying to set bits at offset 0x92 which indicates that the quirk is not applicable. Likely it is not applicable on a wider range of platforms, but it is difficult to discern which platforms if any still depend on the quirk. Rather than try to fix the PCS quirk to consider the DNV register layout instead require explicit opt-in. The assumption is that the OS driver need not touch this register, and platforms can be added with a new boad_ahci_pcs7 board-id when / if problematic platforms are found in the future. The logic in ahci_intel_pcs_quirk() looks for all Intel AHCI instances with "legacy" board-ids and otherwise skips the quirk if the board was matched by class-code. Reported-by:
Stephen Douthit <stephend@silicom-usa.com> Cc: Christoph Hellwig <hch@infradead.org> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Qian Cai authored
[ Upstream commit 3d708895 ] When running heavy memory pressure workloads, the system is throwing endless warnings, smartpqi 0000:23:00.0: AMD-Vi: IOMMU mapping error in map_sg (io-pages: 5 reason: -12) Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 swapper/10: page allocation failure: order:0, mode:0xa20(GFP_ATOMIC), nodemask=(null),cpuset=/,mems_allowed=0,4 Call Trace: <IRQ> dump_stack+0x62/0x9a warn_alloc.cold.43+0x8a/0x148 __alloc_pages_nodemask+0x1a5c/0x1bb0 get_zeroed_page+0x16/0x20 iommu_map_page+0x477/0x540 map_sg+0x1ce/0x2f0 scsi_dma_map+0xc6/0x160 pqi_raid_submit_scsi_cmd_with_io_request+0x1c3/0x470 [smartpqi] do_IRQ+0x81/0x170 common_interrupt+0xf/0xf </IRQ> because the allocation could fail from iommu_map_page(), and the volume of this call could be huge which may generate a lot of serial console output and cosumes all CPUs. Fix it by silencing the warning in this call site, and there is still a dev_err() later to notify the failure. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Takashi Sakamoto authored
[ Upstream commit 6af86bdb ] MOTU 4pre was launched in 2012 by MOTU, Inc. This commit allows userspace applications can transmit and receive PCM frames and MIDI messages for this model via ALSA PCM interface and RawMidi/Sequencer interfaces. The device supports MOTU protocol version 3. Unlike the other devices, the device is simply designed. The size of data block is fixed to 10 quadlets during available sampling rates (44.1 - 96.0 kHz). Each data block includes 1 source packet header, 2 data chunks for messages, 8 data chunks for PCM samples and 2 data chunks for padding to quadlet alignment. The device has no MIDI, optical, BNC and AES/EBU interfaces. Like support for the other MOTU devices, the quality of playback sound is not enough good with periodical noise yet. $ python2 crpp < ~/git/am-config-rom/motu/motu-4pre.img ROM header and bus information block ----------------------------------------------------------------- 400 041078cc bus_info_length 4, crc_length 16, crc 30924 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5 root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 0003ceda directory_length 3, crc 52954 42c 120001f2 specifier id 430 13000045 version 434 17103800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002d248 leaf_length 2, crc 53832 43c 0001f200 company_id 0001f2 | 440 000a41c5 device_id 00000a41c5 | EUI-64 0001f200000a41c5 Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Anton Eidelman authored
[ Upstream commit e01f91df ] ANA log parsing invokes nvme_update_ana_state() per ANA group desc. This updates the state of namespaces with nsids in desc->nsids[]. Both ctrl->namespaces list and desc->nsids[] array are sorted by nsid. Hence nvme_update_ana_state() performs a single walk over ctrl->namespaces: - if current namespace matches the current desc->nsids[n], this namespace is updated, and n is incremented. - the process stops when it encounters the end of either ctrl->namespaces end or desc->nsids[] In case desc->nsids[n] does not match any of ctrl->namespaces, the remaining nsids following desc->nsids[n] will not be updated. Such situation was considered abnormal and generated WARN_ON_ONCE. However ANA log MAY contain nsids not (yet) found in ctrl->namespaces. For example, lets consider the following scenario: - nvme0 exposes namespaces with nsids = [2, 3] to the host - a new namespace nsid = 1 is added dynamically - also, a ANA topology change is triggered - NS_CHANGED aen is generated and triggers scan_work - before scan_work discovers nsid=1 and creates a namespace, a NOTICE_ANA aen was issues and ana_work receives ANA log with nsids=[1, 2, 3] Result: ana_work fails to update ANA state on existing namespaces [2, 3] Solution: Change the way nvme_update_ana_state() namespace list walk checks the current namespace against desc->nsids[n] as follows: a) ns->head->ns_id < desc->nsids[n]: keep walking ctrl->namespaces. b) ns->head->ns_id == desc->nsids[n]: match, update the namespace c) ns->head->ns_id >= desc->nsids[n]: skip to desc->nsids[n+1] This enables correct operation in the scenario described above. This also allows ANA log to contain nsids currently invisible to the host, i.e. inactive nsids. Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Reviewed-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Hannes Reinecke <hare@suse.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
Tom Wu authored
[ Upstream commit 3bec2e37 ] In nvme spec 1.3 there is a definition for data write/read counters from SMART log, (See section 5.14.1.2): This value is reported in thousands (i.e., a value of 1 corresponds to 1000 units of 512 bytes read) and is rounded up. However, in nvme target where value is reported with actual units, but not thousands of units as the spec requires. Signed-off-by:
Tom Wu <tomwu@mellanox.com> Reviewed-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Reviewed-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Reviewed-by:
-
Song Liu authored
[ Upstream commit 825d0b73 ] pti_clone_pmds() assumes that the supplied address is either: - properly PUD/PMD aligned or - the address is actually mapped which means that independently of the mapping level (PUD/PMD/PTE) the next higher mapping exists. If that's not the case the unaligned address can be incremented by PUD or PMD size incorrectly. All callers supply mapped and/or aligned addresses, but for the sake of robustness it's better to handle that case properly and to emit a warning. [ tglx: Rewrote changelog and added WARN_ON_ONCE() ] Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Reviewed-by:
Ingo Molnar <mingo@kernel.org> Acked-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/alpine.DEB.2.21.1908282352470.1938@nanos.tec.linutronix.deSigned-off-by:
-
Shengjiu Wang authored
[ Upstream commit 696d0522 ] The test case is arecord -Dhw:0 -d 10 -f S16_LE -r 48000 -c 2 temp.wav & aplay -Dhw:0 -d 30 -f S16_LE -r 48000 -c 2 test.wav There will be error after end of arecord: aplay: pcm_write:2051: write error: Input/output error Capture and Playback work in parallel in master mode, one substream stops, the other substream is impacted, the reason is that clock is disabled wrongly. The clock's reference count is not increased when second substream starts, the hw_param() function returns in the beginning because first substream is enabled, then in end of first substream, the hw_free() disables the clock. This patch is to move the clock enablement to the place before checking of the device enablement in hw_param(). Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1567012817-12625-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 990784b5 ] When PTI is disabled at boot time either because the CPU is not affected or PTI has been disabled on the command line, the boot code still calls into pti_finalize() which then unconditionally invokes: pti_clone_entry_text() pti_clone_kernel_text() pti_clone_kernel_text() was called unconditionally before the 32bit support was added and 32bit added the call to pti_clone_entry_text(). The call has no side effects as cloning the page tables into the available second one, which was allocated for PTI does not create damage. But it does not make sense either and in case that this functionality would be extended later this might actually lead to hard to diagnose issues. Neither function should be called when PTI is runtime disabled. Make the invocation conditional. Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Acked-by:
-
Mark Rutland authored
[ Upstream commit f32c7a8e ] While the MMUs is disabled, I-cache speculation can result in instructions being fetched from the PoC. During boot we may patch instructions (e.g. for alternatives and jump labels), and these may be dirty at the PoU (and stale at the PoC). Thus, while the MMU is disabled in the KPTI pagetable fixup code we may load stale instructions into the I-cache, potentially leading to subsequent crashes when executing regions of code which have been modified at runtime. Similarly to commit: 8ec41987 ("arm64: mm: ensure patched kernel text is fetched from PoU") ... we can invalidate the I-cache after enabling the MMU to prevent such issues. The KPTI pagetable fixup code itself should be clean to the PoC per the boot protocol, so no maintenance is required for this code. Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Reviewed-by:
James Morse <james.morse@arm.com> Signed-off-by:
Will Deacon <will@kernel.org> Signed-off-by:
-
Neil Horman authored
[ Upstream commit 743dac49 ] On x86, CPUs are limited in the number of interrupts they can have affined to them as they only support 256 interrupt vectors per CPU. 32 vectors are reserved for the CPU and the kernel reserves another 22 for internal purposes. That leaves 202 vectors for assignement to devices. When an interrupt is set up or the affinity is changed by the kernel or the administrator, the vector assignment code attempts to honor the requested affinity mask. If the vector space on the CPUs in that affinity mask is exhausted the code falls back to a wider set of CPUs and assigns a vector on a CPU outside of the requested affinity mask silently. While the effective affinity is reflected in the corresponding /proc/irq/$N/effective_affinity* files the silent breakage of the requested affinity can lead to unexpected behaviour for administrators. Add a pr_warn() when this happens so that adminstrators get at least informed about it in the syslog. [ tglx: Massaged changelog and made the pr_warn() more informative ] Reported-by: djuran@redhat.com Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
-
Douglas RAILLARD authored
[ Upstream commit 77c84dd1 ] Fast switching path only emits an event for the CPU of interest, whereas the regular path emits an event for all the CPUs that had their frequency changed, i.e. all the CPUs sharing the same policy. With the current behavior, looking at cpu_frequency event for a given CPU that is using the fast switching path will not give the correct frequency signal. Signed-off-by:
Douglas RAILLARD <douglas.raillard@arm.com> Acked-by:
-
Al Stone authored
[ Upstream commit 4c4cdc4c ] According to the ACPI 6.3 specification, the _PSD method is optional when using CPPC. The underlying assumption is that each CPU can change frequency independently from all other CPUs; _PSD is provided to tell the OS that some processors can NOT do that. However, the acpi_get_psd() function returns ENODEV if there is no _PSD method present, or an ACPI error status if an error occurs when evaluating _PSD, if present. This makes _PSD mandatory when using CPPC, in violation of the specification, and only on Linux. This has forced some firmware writers to provide a dummy _PSD, even though it is irrelevant, but only because Linux requires it; other OSPMs follow the spec. We really do not want to have OS specific ACPI tables, though. So, correct acpi_get_psd() so that it does not return an error if there is no _PSD method present, but does return a failure when the method can not be executed properly. This allows _PSD to be optional as it should be. Signed-off-by:
Al Stone <ahs3@redhat.com> Signed-off-by:
-
Katsuhiro Suzuki authored
[ Upstream commit f972d02f ] This patch fix setting table of Headphone mixer volume. Current code uses 4 ... 7 values but these values are prohibited. Correct settings are the following: 0000 -12dB 0001 -10.5dB 0010 -9dB 0011 -7.5dB 0100 -6dB 1000 -4.5dB 1001 -3dB 1010 -1.5dB 1011 0dB Signed-off-by:
Katsuhiro Suzuki <katsuhiro@katsuster.net> Reviewed-by:
Daniel Drake <drake@endlessm.com> Link: https://lore.kernel.org/r/20190826153900.25969-1-katsuhiro@katsuster.netSigned-off-by:
-
Mauro Carvalho Chehab authored
[ Upstream commit 093347ab ] As pointed by cppcheck: [drivers/media/i2c/ov9650.c:706]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:707]: (error) Shifting by a negative value is undefined behaviour [drivers/media/i2c/ov9650.c:721]: (error) Shifting by a negative value is undefined behaviour Prevent mangling with gains with invalid values. As pointed by Sylvester, this should never happen in practice, as min value of V4L2_CID_GAIN control is 16 (gain is always >= 16 and m is always >= 0), but it is too hard for a static analyzer to get this, as the logic with validates control min/max is elsewhere inside V4L2 core. Reviewed-by:
Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
Benjamin Peterson authored
[ Upstream commit b92675f4 ] While tracing a program that calls isatty(3), I noticed that strace reported TCGETS for the request argument of the underlying ioctl(2) syscall while perf trace reported TCSETS. strace is corrrect. The bug in perf was due to the tty ioctl beauty table starting at 0x5400 rather than 0x5401. Committer testing: Using augmented_raw_syscalls.o and settings to make 'perf trace' use strace formatting, i.e. with this in ~/.perfconfig # cat ~/.perfconfig [trace] add_events = /home/acme/git/linux/tools/perf/examples/bpf/augmented_raw_syscalls.c show_zeros = yes show_duration = no no_inherit = yes show_timestamp = no show_arg_names = no args_alignment = 40 show_prefix = yes # strace -e ioctl stty > /dev/null ioctl(0, TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, 0x7fff8a9b0860) = -1 ENOTTY (Inappropriate ioctl for device) ioctl(1, TCGETS, 0x7fff8a9b0540) = -1 ENOTTY (Inappropriate ioctl for device) +++ exited with 0 +++ # Before: # perf trace -e ioctl stty > /dev/null ioctl(0, TCSETS, 0x7fff2cf79f20) = 0 ioctl(1, TIOCSWINSZ, 0x7fff2cf79f40) = -1 ENOTTY (Inappropriate ioctl for device) ioctl(1, TCSETS, 0x7fff2cf79c20) = -1 ENOTTY (Inappropriate ioctl for device) # After: # perf trace -e ioctl stty > /dev/null ioctl(0, TCGETS, 0x7ffed0763920) = 0 ioctl(1, TIOCGWINSZ, 0x7ffed0763940) = -1 ENOTTY (Inappropriate ioctl for device) ioctl(1, TCGETS, 0x7ffed0763620) = -1 ENOTTY (Inappropriate ioctl for device) # Signed-off-by:
Benjamin Peterson <benjamin@python.org> Tested-by:
-
Maciej S. Szmigiero authored
[ Upstream commit 9d802222 ] saa7134_i2c_eeprom_md7134_gate() function and the associated comment uses an inverted i2c gate open / closed terminology. Let's fix this. Signed-off-by:
Maciej S. Szmigiero <mail@maciej.szmigiero.name> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fix alignment checkpatch warning] Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 1c770f0f ] In submit_urbs(), 'cam->sbuf[i].data' is allocated through kmalloc_array(). However, it is not deallocated if the following allocation for urbs fails. To fix this issue, free 'cam->sbuf[i].data' if usb_alloc_urb() fails. Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 42e64117 ] If saa7146_register_device() fails, no cleanup is executed, leading to memory/resource leaks. To fix this issue, perform necessary cleanup work before returning the error. Signed-off-by:
-
Hans Verkuil authored
[ Upstream commit 14d55116 ] If cec_notifier_cec_adap_unregister() is called before cec_unregister_adapter() then everything is OK (and this is the case today). But if it is the other way around, then cec_notifier_unregister() is called first, and that doesn't set n->cec_adap to NULL. So if e.g. cec_notifier_set_phys_addr() is called after cec_notifier_unregister() but before cec_unregister_adapter() then n->cec_adap points to an unregistered and likely deleted cec adapter. So just set n->cec_adap->notifier and n->cec_adap to NULL for rubustness. Eventually cec_notifier_unregister will disappear and this will be simplified substantially. Signed-off-by:
-
Kamil Konieczny authored
[ Upstream commit 2c2b20e0 ] Regulators should be enabled before clocks to avoid h/w hang. This require change in exynos_bus_probe() to move exynos_bus_parse_of() after exynos_bus_parent_parse_of() and change in error handling. Similar change is needed in exynos_bus_exit() where clock should be disabled before regulators. Signed-off-by:
Kamil Konieczny <k.konieczny@partner.samsung.com> Acked-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
MyungJoo Ham <myungjoo.ham@samsung.com> Signed-off-by:
-
Leonard Crestez authored
[ Upstream commit 0ef7c7cc ] The devfreq passive governor registers and unregisters devfreq transition notifiers on DEVFREQ_GOV_START/GOV_STOP using devm wrappers. If devfreq itself is registered with devm then a warning is triggered on rmmod from devm_devfreq_unregister_notifier. Call stack looks like this: devm_devfreq_unregister_notifier+0x30/0x40 devfreq_passive_event_handler+0x4c/0x88 devfreq_remove_device.part.8+0x6c/0x9c devm_devfreq_dev_release+0x18/0x20 release_nodes+0x1b0/0x220 devres_release_all+0x78/0x84 device_release_driver_internal+0x100/0x1c0 driver_detach+0x4c/0x90 bus_remove_driver+0x7c/0xd0 driver_unregister+0x2c/0x58 platform_driver_unregister+0x10/0x18 imx_devfreq_platdrv_exit+0x14/0xd40 [imx_devfreq] This happens because devres_release_all will first remove all the nodes into a separate todo list so the nested devres_release from devm_devfreq_unregister_notifier won't find anything. Fix the warning by calling the non-devm APIS for frequency notification. Using devm wrappers is not actually useful for a governor anyway: it relies on the devfreq core to correctly match the GOV_START/GOV_STOP notifications. Fixes: 99613311 ("PM / devfreq: Add new passive governor") Signed-off-by:
Leonard Crestez <leonard.crestez@nxp.com> Acked-by:
-
Yazen Ghannam authored
[ Upstream commit 8a2eaab7 ] AMD Family 17h systems currently require address translation in order to report the system address of a DRAM ECC error. This is currently done before decoding the syndrome information. The syndrome information does not depend on the address translation, so the proper EDAC csrow/channel reporting can function without the address. However, the syndrome information will not be decoded if the address translation fails. Decode the syndrome information before doing the address translation. The syndrome information is architecturally defined in MCA_SYND and can be considered robust. The address translation is system-specific and may fail on newer systems without proper updates to the translation algorithm. Fixes: 713ad546 ("EDAC, amd64: Define and register UMC error decode function") Signed-off-by:
Yazen Ghannam <yazen.ghannam@amd.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: "linux-edac@vger.kernel.org" <linux-edac@vger.kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/20190821235938.118710-6-Yazen.Ghannam@amd.comSigned-off-by:
-
Yazen Ghannam authored
[ Upstream commit f8be8e56 ] AMD Family 17h systems support x4 and x16 DRAM devices. However, the device type is not checked when setting mci.edac_ctl_cap. Set the appropriate capability flag based on the device type. Default to x8 DRAM device when neither the x4 or x16 bits are set. [ bp: reverse cpk_en check to save an indentation level. ] Fixes: 2d09d8f3 ("EDAC, amd64: Determine EDAC MC capabilities on Fam17h") Signed-off-by:
-
Gerald BAEZA authored
[ Upstream commit d9c5c083 ] Following the patch 'perf stat: Fix --no-scale', an alignment trap happens in process_counter_values() on ARMv7 platforms due to the attempt to copy non 64 bits aligned double words (pointed by 'count') via a NEON vectored instruction ('vld1' with 64 bits alignment constraint). This patch sets a 64 bits alignment constraint on 'contents[]' field in 'struct xyarray' since the 'count' pointer used above points to such a structure. Signed-off-by:
Gerald Baeza <gerald.baeza@st.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1566464769-16374-1-git-send-email-gerald.baeza@st.comSigned-off-by:
-
Wenwen Wang authored
[ Upstream commit fcd5ce4b ] In dvb_create_media_entity(), 'dvbdev->entity' is allocated through kzalloc(). Then, 'dvbdev->pads' is allocated through kcalloc(). However, if kcalloc() fails, the allocated 'dvbdev->entity' is not deallocated, leading to a memory leak bug. To fix this issue, free 'dvbdev->entity' before returning -ENOMEM. Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Thomas Gleixner authored
[ Upstream commit 692117c1 ] Warning when p == NULL and then proceeding and dereferencing p does not make any sense as the kernel will crash with a NULL pointer dereference right away. Bailing out when p == NULL and returning an error code does not cure the underlying problem which caused p to be NULL. Though it might allow to do proper debugging. Same applies to the clock id check in set_process_cpu_timer(). Clean them up and make them return without trying to do further damage. Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Link: https://lkml.kernel.org/r/20190819143801.846497772@linutronix.deSigned-off-by:
-
Sean Young authored
[ Upstream commit c268e7ad ] KASAN: global-out-of-bounds Read in dvb_pll_attach Syzbot reported global-out-of-bounds Read in dvb_pll_attach, while accessing id[dvb_pll_devcount], because dvb_pll_devcount was 65, that is more than size of 'id' which is DVB_PLL_MAX(64). Rather than increasing dvb_pll_devcount every time, use ida so that numbers are allocated correctly. This does mean that no more than 64 devices can be attached at the same time, but this is more than sufficient. usb 1-1: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer dvbdev: DVB: registering new adapter (774 Friio White ISDB-T USB2.0) usb 1-1: media controller created dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered. tc90522 0-0018: Toshiba TC90522 attached. usb 1-1: DVB: registering adapter 0 frontend 0 (Toshiba TC90522 ISDB-T module)... dvbdev: dvb_create_media_entity: media entity 'Toshiba TC90522 ISDB-T module' registered. ================================================================== BUG: KASAN: global-out-of-bounds in dvb_pll_attach+0x6c5/0x830 drivers/media/dvb-frontends/dvb-pll.c:798 Read of size 4 at addr ffffffff89c9e5e0 by task kworker/0:1/12 CPU: 0 PID: 12 Comm: kworker/0:1 Not tainted 5.2.0-rc6+ #13 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: usb_hub_wq hub_event Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xca/0x13e lib/dump_stack.c:113 print_address_description+0x67/0x231 mm/kasan/report.c:188 __kasan_report.cold+0x1a/0x32 mm/kasan/report.c:317 kasan_report+0xe/0x20 mm/kasan/common.c:614 dvb_pll_attach+0x6c5/0x830 drivers/media/dvb-frontends/dvb-pll.c:798 dvb_pll_probe+0xfe/0x174 drivers/media/dvb-frontends/dvb-pll.c:877 i2c_device_probe+0x790/0xaa0 drivers/i2c/i2c-core-base.c:389 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:843 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2111 i2c_new_client_device+0x5b3/0xc40 drivers/i2c/i2c-core-base.c:778 i2c_new_device+0x19/0x50 drivers/i2c/i2c-core-base.c:821 dvb_module_probe+0xf9/0x220 drivers/media/dvb-core/dvbdev.c:985 friio_tuner_attach+0x125/0x1d0 drivers/media/usb/dvb-usb-v2/gl861.c:536 dvb_usbv2_adapter_frontend_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:675 [inline] dvb_usbv2_adapter_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:804 [inline] dvb_usbv2_init drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:865 [inline] dvb_usbv2_probe.cold+0x24dc/0x255d drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:980 usb_probe_interface+0x305/0x7a0 drivers/usb/core/driver.c:361 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:843 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2111 usb_set_configuration+0xdf6/0x1670 drivers/usb/core/message.c:2023 generic_probe+0x9d/0xd5 drivers/usb/core/generic.c:210 usb_probe_device+0x99/0x100 drivers/usb/core/driver.c:266 really_probe+0x281/0x660 drivers/base/dd.c:509 driver_probe_device+0x104/0x210 drivers/base/dd.c:670 __device_attach_driver+0x1c2/0x220 drivers/base/dd.c:777 bus_for_each_drv+0x15c/0x1e0 drivers/base/bus.c:454 __device_attach+0x217/0x360 drivers/base/dd.c:843 bus_probe_device+0x1e4/0x290 drivers/base/bus.c:514 device_add+0xae6/0x16f0 drivers/base/core.c:2111 usb_new_device.cold+0x8c1/0x1016 drivers/usb/core/hub.c:2534 hub_port_connect drivers/usb/core/hub.c:5089 [inline] hub_port_connect_change drivers/usb/core/hub.c:5204 [inline] port_event drivers/usb/core/hub.c:5350 [inline] hub_event+0x1ada/0x3590 drivers/usb/core/hub.c:5432 process_one_work+0x905/0x1570 kernel/workqueue.c:2269 process_scheduled_works kernel/workqueue.c:2331 [inline] worker_thread+0x7ab/0xe20 kernel/workqueue.c:2417 kthread+0x30b/0x410 kernel/kthread.c:255 ret_from_fork+0x24/0x30 arch/x86/entry/entry_64.S:352 The buggy address belongs to the variable: id+0x100/0x120 Memory state around the buggy address: ffffffff89c9e480: fa fa fa fa 00 00 fa fa fa fa fa fa 00 00 00 00 ffffffff89c9e500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > ffffffff89c9e580: 00 00 00 00 00 00 00 00 00 00 00 00 fa fa fa fa ^ ffffffff89c9e600: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa ffffffff89c9e680: 04 fa fa fa fa fa fa fa 04 fa fa fa fa fa fa fa ================================================================== Reported-by: syzbot+8a8f48672560c8ca59dd@syzkaller.appspotmail.com Signed-off-by:
-
A Sun authored
[ Upstream commit 9fc3ce31 ] Fix and eliminate mceusb's IR length limit for IR signals transmitted to the MCE IR blaster ports. An IR signal TX exceeding 306 pulse/space samples presently causes -EINVAL return error. There's no such limitation nor error with the MCE device hardware. And valid IR signals exist with more than 400 pulse/space for the control of certain appliances (eg Panasonic ACXA75C00600 air conditioner). The scope of this patch is limited to the mceusb driver. There are still IR signal TX length and time constraints that related modules of rc core (eg LIRC) impose, further up the driver stack. Changes for mceusb_tx_ir(): Converts and sends LIRC IR pulse/space sequence to MCE device IR pulse/space format. Break long length LIRC sequence into multiple (unlimited number of) parts for sending to the MCE device. Reduce kernel stack IR buffer size: 128 (was 384) Increase MCE IR data packet size: 31 (was 5) Zero time LIRC pulse/space no longer copied to MCE IR data. Eliminate overwriting the source/input LIRC IR data in txbuf[]. Eliminate -EINVAL return; return number of IR samples sent (>0) or MCE write error code (<0). New mce_write() and mce_write_callback(): Implements synchronous blocking I/O, with timeout, for writing/sending data to the MCE device. An unlimited multipart IR signal sent to the MCE device faster than real time requires flow control absent with the original mce_request_packet() and mce_async_callback() asynchronous I/O implementation. Also absent is TX error feedback. mce_write() combines and replaces mce_request_packet() and mce_async_callback() with conversion to synchronous I/O. mce_write() returns bytes sent (>0) or MCE device write error (<0). Debug hex dump TX data before processing. Rename mce_async_out() -> mce_command_out(): The original name is misleading with underlying synchronous I/O implementation. Function renamed to mce_command_out(). Changes in mceusb_handle_command(): Add support for MCE device error case MCE_RSP_TX_TIMEOUT "IR TX timeout (TX buffer underrun)" Changes in mceusb_dev_printdata(): Changes support test and debug of multipart TX IR. Add buffer boundary information (offset and buffer size) to TX hex dump. Correct TX trace bug "Raw IR data, 0 pulse/space samples" Add trace for MCE_RSP_TX_TIMEOUT "IR TX timeout (TX buffer underrun)" Other changes: The driver's write to USB device architecture change (async to sync I/O) is significant so we bump DRIVER_VERSION to "1.95" (from "1.94"). Tests: $ cat -n irdata1 | head -3 1 carrier 36000 2 pulse 6350 3 space 6350 $ cat -n irdata1 | tail -3 76 pulse 6350 77 space 6350 78 pulse 6350 $ ir-ctl -s irdata1 [1549021.073612] mceusb 1-1.3:1.0: requesting 36000 HZ carrier [1549021.073635] mceusb 1-1.3:1.0: tx data[0]: 9f 06 01 45 (len=4 sz=4) [1549021.073649] mceusb 1-1.3:1.0: Request carrier of 35714 Hz (period 28us) [1549021.073848] mceusb 1-1.3:1.0: tx done status = 4 (wait = 100, expire = 100 (1000ms), urb->actual_length = 4, urb->status = 0) [1549021.074689] mceusb 1-1.3:1.0: rx data[0]: 9f 06 01 45 (len=4 sz=4) [1549021.074701] mceusb 1-1.3:1.0: Got carrier of 35714 Hz (period 28us) [1549021.102023] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3) [1549021.102036] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03 [1549021.102219] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0) [1549021.131979] mceusb 1-1.3:1.0: tx data[0]: 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 9e ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f ff 7f 91 ff (len=81 sz=81) [1549021.131992] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549021.133592] mceusb 1-1.3:1.0: tx done status = 81 (wait = 100, expire = 100 (1000ms), urb->actual_length = 81, urb->status = 0) Hex dumps limited to 64 bytes. 0xff is MCE maximum time pulse, 0x7f is MCE maximum time space. $ cat -n irdata2 | head -3 1 carrier 36000 2 pulse 50 3 space 50 $ cat -n irdata2 | tail -3 254 pulse 50 255 space 50 256 pulse 50 $ ir-ctl -s irdata2 [1549306.586998] mceusb 1-1.3:1.0: tx data[0]: 9f 08 03 (len=3 sz=3) [1549306.587015] mceusb 1-1.3:1.0: Request transmit blaster mask of 0x03 [1549306.587252] mceusb 1-1.3:1.0: tx done status = 3 (wait = 100, expire = 100 (1000ms), urb->actual_length = 3, urb->status = 0) [1549306.613275] mceusb 1-1.3:1.0: tx data[0]: 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 9e 81 (len=128 sz=128) [1549306.613291] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549306.614837] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0) [1549306.614861] mceusb 1-1.3:1.0: tx data[0]: 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 01 81 9e 01 (len=128 sz=128) [1549306.614869] mceusb 1-1.3:1.0: Raw IR data, 30 pulse/space samples [1549306.620199] mceusb 1-1.3:1.0: tx done status = 128 (wait = 100, expire = 100 (1000ms), urb->actual_length = 128, urb->status = 0) [1549306.620212] mceusb 1-1.3:1.0: tx data[0]: 89 81 01 81 01 81 01 81 01 81 80 (len=11 sz=11) [1549306.620221] mceusb 1-1.3:1.0: Raw IR data, 9 pulse/space samples [1549306.633294] mceusb 1-1.3:1.0: tx done status = 11 (wait = 98, expire = 100 (1000ms), urb->actual_length = 11, urb->status = 0) Hex dumps limited to 64 bytes. 0x81 is MCE minimum time pulse, 0x01 is MCE minimum time space. TX IR part 3 sz=11 shows 20msec I/O blocking delay (100expire - 98wait = 2jiffies) Signed-off-by:
A Sun <as1033x@comcast.net> Signed-off-by:
-
Mike Christie authored
[ Upstream commit 887e975c ] Fix bug added with the patch: commit 8f3ea359 Author: Josef Bacik <josef@toxicpanda.com> Date: Mon Jul 16 12:11:35 2018 -0400 nbd: handle unexpected replies better where if the timeout handler runs when the completion path is and we fail to grab the mutex in the timeout handler we will leave a config reference and cannot free the config later. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Mike Christie <mchristi@redhat.com> Signed-off-by:
-
Wenwen Wang authored
[ Upstream commit 60e2dde1 ] In led_trigger_set(), 'event' is allocated in kasprintf(). However, it is not deallocated in the following execution if the label 'err_activate' or 'err_add_groups' is entered, leading to memory leaks. To fix this issue, free 'event' before returning the error. Fixes: 52c47742 ("leds: triggers: send uevent when changing triggers") Signed-off-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Maxime Ripard authored
[ Upstream commit 7df8f9a2 ] The BCLK divider should be calculated using the parameters that actually make the BCLK rate: the number of channels, the sampling rate and the sample width. We've been using the oversample_rate previously because in the former SoCs, the BCLK's parent is MCLK, which in turn is being used to generate the oversample rate, so we end up with something like this: oversample = mclk_rate / sampling_rate bclk_div = oversample / word_size / channels So, bclk_div = mclk_rate / sampling_rate / word_size / channels. And this is actually better, since the oversampling ratio only plays a role because the MCLK is its parent, not because of what BCLK is supposed to be. Furthermore, that assumption of MCLK being the parent has been broken on newer SoCs, so let's use the proper formula, and have the parent rate as an argument. Fixes: 7d299381 ("ASoC: sun4i-i2s: Add support for H3") Fixes: 21faaea1 ("ASoC: sun4i-i2s: Add support for A83T") Fixes: 66ecce33 ("ASoC: sun4i-i2s: Add compatibility with A64 codec I2S") Signed-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://lore.kernel.org/r/c3595e3a9788c2ef2dcc30aa3c8c4953bb5cc249.1566242458.git-series.maxime.ripard@bootlin.comSigned-off-by:
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 42fc2e9e ] We were getting the file by luck, from one of the paths in -I, fix it to get it from the proper place: $ cd tools/include/uapi/asm/ [acme@quaco asm]$ grep include bitsperlong.h #include "../../arch/x86/include/uapi/asm/bitsperlong.h" #include "../../arch/arm64/include/uapi/asm/bitsperlong.h" #include "../../arch/powerpc/include/uapi/asm/bitsperlong.h" #include "../../arch/s390/include/uapi/asm/bitsperlong.h" #include "../../arch/sparc/include/uapi/asm/bitsperlong.h" #include "../../arch/mips/include/uapi/asm/bitsperlong.h" #include "../../arch/ia64/include/uapi/asm/bitsperlong.h" #include "../../arch/riscv/include/uapi/asm/bitsperlong.h" #include "../../arch/alpha/include/uapi/asm/bitsperlong.h" #include <asm-generic/bitsperlong.h> $ ls -la ../../arch/x86/include/uapi/asm/bitsperlong.h ls: cannot access '../../arch/x86/include/uapi/asm/bitsperlong.h': No such file or directory $ ls -la ../../../arch/*/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 237 ../../../arch/alpha/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 841 ../../../arch/arm64/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 966 ../../../arch/hexagon/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 234 ../../../arch/ia64/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 100 ../../../arch/microblaze/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 244 ../../../arch/mips/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 352 ../../../arch/parisc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 312 ../../../arch/powerpc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 353 ../../../arch/riscv/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 292 ../../../arch/s390/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 323 ../../../arch/sparc/include/uapi/asm/bitsperlong.h -rw-rw-r--. 1 320 ../../../arch/x86/include/uapi/asm/bitsperlong.h $ Found while fixing some other problem, before it was escaping the tools/ chroot and using stuff in the kernel sources: CC /tmp/build/perf/util/find_bit.o In file included from /git/linux/tools/include/../../arch/x86/include/uapi/asm/bitsperlong.h:11, from /git/linux/tools/include/uapi/asm/bitsperlong.h:3, from /git/linux/tools/include/linux/bits.h:6, from /git/linux/tools/include/linux/bitops.h:13, from ../lib/find_bit.c:17: # cd /git/linux/tools/include/../../arch/x86/include/uapi/asm/ # pwd /git/linux/arch/x86/include/uapi/asm # Now it is getting the one we want it to, i.e. the one inside tools/: CC /tmp/build/perf/util/find_bit.o In file included from /git/linux/tools/arch/x86/include/uapi/asm/bitsperlong.h:11, from /git/linux/tools/include/linux/bits.h:6, from /git/linux/tools/include/linux/bitops.h:13, Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8f8cfqywmf6jk8a3ucr0ixhu@git.kernel.orgSigned-off-by:
-
