Fix the node names for the MMC/SD card controller to conform
to the standard node name mmc@..
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210122222038.2888747-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'ux500-dts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Ux500 DTS updates for the v5.12 kernel cycle:

- A new DTS file for the Samsung GT-I9070 (Janice)
- Fix up ADC channel name attributes
- Add charger interrupts
- Add thermistors to the HREF boards
- Remove the non-existing AB8505 HW ADC IRQ
- Push down the VMMCI setting to each board
- Add the die temperature channel to teh AB8505
- Fix up the MMC host names to follow the standard
  naming convention

* tag 'ux500-dts-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Fix up MMC host node names
  ARM: dts: ux500: Add die temperature to AB8505
  ARM: dts: ux500: Push VMMCI down to each tree
  ARM: dts: ux500: Remove the GPADC HW IRQ
  ARM: dts: ux500: Add thermistors to the HREF
  ARM: dts: ux500: Add interrupts to charger
  ARM: dts: ux500: Fix channel names attributes
  ARM: dts: ux500: Add a device tree for Janice

Link: https://lore.kernel.org/r/CACRpkdbn=P63V9aEO2wKu2DwvVUcbjwCEV_JvKwWZ0netT75ig@mail.gmail.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

The standard mandates that these nodes be named
mmc@... not sdi_foo@...
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The BreadBee and the BreadBee Crust are the same PCB with a different
SoC mounted. There are two top level dts to handle this.

To avoid deduplicating the parts that are more related to the PCB than
the SoC (i.e. the voltage regs and LEDs) add a common dtsi that can
be included in both top level dts.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/r/20201224020354.2212037-1-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

AT91 DT for 5.12:

- removing a property never documented nor used
- adding i2c recovery GPI for one more board

* tag 'at91-dt-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  ARM: dts: at91: sama5d2: remove atmel,wakeup-type references
  ARM: dts: at91-sama5d27_wlsom1: add i2c recovery

Link: https://lore.kernel.org/r/20210122145056.171283-1-nicolas.ferre@microchip.comSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_dts_update_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt

SoCFPGA DTS updates for v5.12
- Add DTS file for eASIC N5X platform
- Use generic ngpios in GPIO entries
- Add PMU node for Arria10

* tag 'socfpga_dts_update_for_v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: arria10: add PMU node
  arm64: dts: n5x: Add support for Intel's eASIC N5X platform
  arm64: dts: socfpga: Use generic "ngpios" rather than "snps,nr-gpios"

Link: https://lore.kernel.org/r/20210120012334.25730-1-dinguyen@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

atmel,wakeup-type DT property is not referenced anywhere in the current
and previous version of the code thus remove it.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Nicolas Ferre <nferre@kernel.org>
Link: https://lore.kernel.org/r/1609845525-10766-1-git-send-email-claudiu.beznea@microchip.com

Add the i2c gpio pinctrls to support the i2c bus recovery on this board.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20210117183558.5369-1-nicolas.ferre@microchip.com

The prefix for honestar should come before honeywell.

Fixes: 43181b5d ("dt-bindings: vendor-prefixes: Add honestar vendor prefix")
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Link: https://lore.kernel.org/linux-arm-kernel/CAFr9PXmwOEuHHA-kDeL1YS8bWvovrt43MXxyy1J+hGbXwPUFSA@mail.gmail.com/
Link: https://lore.kernel.org/r/20201212012253.373074-1-daniel@0x0f.com'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-dt-bindings-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.12

  - Document suport for the Beacon EmbeddedWorks RZ/G2N and RZ/H kits.

* tag 'renesas-dt-bindings-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: arm: renesas: Add Beacon RZ/G2N and RZ/G2H boards

Link: https://lore.kernel.org/r/20210115094610.2334058-3-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-arm-dt-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.12

  - Timer (CMT/TMU) support for R-Car Gen3 SoCs,
  - Watchdog (RWDT), pincontrol (PFC), GPIO, and DMA (SYS-DMAC) support
    for the R-Car V3U SoC,
  - USB2 clock selector and SPI Multi I/O Bus Controller (RPC-IF)
    support for RZ/G2 SoCs,
  - Support for the Beacon EmbeddedWorks RZ/G2H and RZ/G2N kits,
  - Various fixes and improvements.

* tag 'renesas-arm-dt-for-v5.12-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (24 commits)
  arm64: dts: renesas: r8a779a0: Add SYS-DMAC nodes
  arm64: dts: renesas: r8a779a0: Add GPIO nodes
  arm64: dts: renesas: r8a779a0: Add pinctrl device node
  arm64: dts: renesas: rzg2: Add RPC-IF Support
  arm64: dts: renesas: rzg2: Add usb2_clksel to RZ/G2 M/N/H
  arm64: dts: renesas: r8a774e1: Introduce beacon-rzg2h-kit
  arm64: dts: renesas: r8a774b1: Introduce beacon-rzg2n-kit
  arm64: dts: renesas: beacon-rzg2m-kit: Rearrange SoC unique functions
  arm64: dts: renesas: beacon: Better describe keys
  arm64: dts: renesas: beacon: Configure Audio CODEC clocks
  arm64: dts: renesas: beacon kit: Fix Audio Clock sources
  arm64: dts: renesas: beacon: Configure programmable clocks
  arm64: dts: renesas: falcon: Enable watchdog timer
  arm64: dts: renesas: r8a779a0: Add RWDT node
  arm64: dts: renesas: beacon: Correct I2C bus speeds
  arm64: dts: renesas: beacon: Enable SPI
  arm64: dts: renesas: beacon: Don't make vccq_sdhi0 always on
  arm64: dts: renesas: beacon: Fix RGB Display PWM Backlight
  arm64: dts: renesas: beacon: Fix LVDS PWM Backlight
  arm64: dts: renesas: beacon: Fix audio-1.8V pin enable
  ...

Link: https://lore.kernel.org/r/20210115094610.2334058-2-geert+renesas@glider.beSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add device nodes for the Direct Memory Access Controller for System
(SYS-DMAC) instances on the Renesas R-Car V3U (r8a779a0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210107182045.1948037-1-geert+renesas@glider.be

Add device nodes for the General Purpose Input/Output (GPIO) block on
the Renesas R-Car V3U (r8a779a0) SoC.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20210114111117.2214281-1-geert+renesas@glider.be

This patch adds the pinctrl device node for the R8A779A0 (V3U) SoC.
Signed-off-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/20210112165948.31162-1-uli+renesas@fpond.euSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The AB8505 mixed signal ASIC variant has a die temperature
channel that is missing in the AB8500 variant. Add it to
the DTSI.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The setting of VMMCI differs so much between different
boards that we need to handle it on a per-board basis
rather that complicating things by overriding stuff from
the included DTSI:s. Push it down into top-level tree
instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The AB8505 variant lacks the hardware conversion IRQ, so
do not put it in with this variant.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds the two temperature-monitoring thermistors to the
HREF reference design, defines a thermal zone for the
chassis and sets some reasonable thermal limits.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The different charger nodes in the AB8500 and AB8505
includes was missing the interrupt assignments for the
interrupts necessary to drive the AB8500/AB8505 charging
state machine.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The AB8500/AB8505 is providing ADC channels and do so
using the standard property "io-channel-names" not the
mistakenly singular form "io-channel-name".
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

This adds a basic device tree for the Samsung GT-I9070
mobile phone also known as Janice.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The RZ/G2 series contain the SPI Multi I/O Bus Controller (RPC-IF).
Add the nodes, but make them disabled by default.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210102115412.3402059-4-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Per the reference manual for the RZ/G Series, 2nd Generation,
the RZ/G2M, RZ/G2N, and RZ/G2H have a bit that can be set to
choose between a crystal oscillator and an external oscillator.

Because only boards that need this should enable it, it's marked
as disabled by default for backwards compatibility with existing
boards.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201228202221.2327468-2-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Beacon EmbeddedWorks is introducing a new kit based on the
RZ/G2H SoC from Renesas.

The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.

The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a variety of push buttons and LED's, and support for
a parallel RGB and an LVDS display.  It uses the same baseboard
and SOM files as the RZ/G2M and RZ/G2N kits.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-8-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Beacon EmbeddedWorks is introducing a new kit based on the
RZ/G2N SoC from Renesas.

The SOM supports eMMC, WiFi and Bluetooth, along with a Cat-M1
cellular radio.

The Baseboard has Ethernet, USB, HDMI, stereo audio in and out,
along with a variety of push buttons and LED's, and support for
a parallel RGB and an LVDS display.  It uses the same baseboard
and SOM as the RZ/G2M.

This SOM has only 2GB of DDR, and beacon-renesom-som.dtsi contains
the base memory node, so an additional memory node isn't necessary.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-7-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

In preparation for adding new dev kits, move anything specific to the
RZ/G2M from the SOM-level and baseboard-levels and move them to the
kit-level.  This allows the SOM and baseboard to be reused with
other SoC's.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-6-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The keys on the baseboard are laid out in an diamond pattern, up, down,
left, right and center.  Update the descriptions to make it easier to
read.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-4-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

With the newly added configurable clock options, the audio CODEC can
configure the mclk automatically.  Add the reference to the versaclock.
Since the devices on I2C5 can communicate at 400KHz, let's also increase
that too
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-3-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

The SoC was expecting two clock sources with different frequencies.
One to support 44.1KHz and one to support 48KHz.  With the newly added
ability to configure the programmable clock, configure both clocks.

Assign the rcar-sound clocks to reference the versaclock instead of
the fixed clock.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-2-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

When the board was added, clock drivers were being updated done at
the same time to allow the versaclock driver to properly configure
the modes.  Unfortunately, the updates were not applied to the board
files at the time they should have been, so do it now.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20201224170502.2254683-1-aford173@gmail.comSigned-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Merge tag 'v5.11-berlin-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into arm/dt

v5.11-berlin-dts

* tag 'v5.11-berlin-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
  ARM: dts: berlin: Use generic "ngpios" rather than "snps,nr-gpios"
  ARM: dts: berlin: Fix schema warnings for pwm-leds

Link: https://lore.kernel.org/r/20201211100521.2e6f4faa@xhacker.debianSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'v5.11-berlin-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin into arm/dt

v5.11-berlin-dts64

* tag 'v5.11-berlin-dts64' of git://git.kernel.org/pub/scm/linux/kernel/git/jszhang/linux-berlin:
  arm64: dts: synaptics: Use generic "ngpios" rather than "snps,nr-gpios"

Link: https://lore.kernel.org/r/20201211100235.2b0b795b@xhacker.debianSigned-off-by: Arnd Bergmann <arnd@arndb.de>

Add the PMU node for Arria10.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

The Intel eASIC N5X platform shares the same register map as the Agilex
platform, thus, we can re-use the socfpga_agilex.dtsi as the base
DTSI.
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

This is to remove similar errors as below:

OF: /.../gpio-port@0: could not find phandle

Commit 7569486d ("gpio: dwapb: Add ngpios DT-property support")
explained the reason of above errors well and added the generic
"ngpios" property, let's use it.
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>

Pull s390 cleanups from Vasily Gorbik:
 "Update defconfigs and sort config select list"

* tag 's390-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/Kconfig: sort config S390 select list once again
  s390: update defconfigs

Pull power management fixes from Rafael Wysocki:
 "These fix a crash in intel_pstate during resume from suspend-to-RAM
  that may occur after recent changes and two resource leaks in error
  paths in the operating performance points (OPP) framework, add a new
  C-states table to intel_idle and update the cpuidle MAINTAINERS entry
  to cover the governors too.

  Specifics:

   - Fix recently introduced crash in the intel_pstate driver that
     occurs if scale-invariance is disabled during resume from
     suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
     values made by the platform firmware (Rafael Wysocki).

   - Fix a memory leak and add a missing clk_put() in error paths in the
     OPP framework (Quanyang Wang, Viresh Kumar).

   - Add new C-states table for SnowRidge processors to the intel_idle
     driver (Artem Bityutskiy).

   - Update the MAINTAINERS entry for cpuidle to make it clear that the
     governors are covered by it too (Lukas Bulwahn)"

* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  intel_idle: add SnowRidge C-state table
  cpufreq: intel_pstate: Fix fast-switch fallback path
  opp: Call the missing clk_put() on error
  opp: fix memory leak in _allocate_opp_table
  MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK

* pm-cpufreq:
  cpufreq: intel_pstate: Fix fast-switch fallback path

* pm-cpuidle:
  intel_idle: add SnowRidge C-state table
  MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK

Pull SCSI fixes from James Bottomley:
 "This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).

  The big core two fixes are for power management ("block: Do not accept
  any requests while suspended" and "block: Fix a race in the runtime
  power management code") which finally sorts out the resume problems
  we've occasionally been having.

  To make the resume fix, there are seven necessary precursors which
  effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
  in block is automatically a power management exempt one.

  All of the non-PM preempt cases are removed except for the one in the
  SCSI Parallel Interface (spi) domain validation which is a genuine
  case where we have to run requests at high priority to validate the
  bus so this becomes an autopm get/put protected request"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
  scsi: cxgb4i: Fix TLS dependency
  scsi: ufs: Un-inline ufshcd_vops_device_reset function
  scsi: ufs: Re-enable WriteBooster after device reset
  scsi: ufs-mediatek: Use correct path to fix compile error
  scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
  scsi: block: Do not accept any requests while suspended
  scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
  scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
  scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
  scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
  scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
  scsi: block: Introduce BLK_MQ_REQ_PM
  scsi: block: Fix a race in the runtime power management code
  scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
  scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
  scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
  scsi: ufs-pci: Fix restore from S4 for Intel controllers
  scsi: ufs-mediatek: Keep VCC always-on for specific devices
  scsi: ufs: Allow regulators being always-on
  scsi: ufs: Clear UAC for RPMB after ufshcd resets
  ...