- 24 Sep, 2014 1 commit
-
-
Srinivas Kandagatla authored
since commit 31964ffe ("tty: serial: msm: Remove direct access to GSBI")' serial hangs if earlyprintk are enabled. This hang is noticed only when the GSBI driver is probed and all the earlyprintks before gsbi probe are seen on the console. The reason why it hangs is because GSBI driver disables hclk in its probe function without realizing that the serial IP might be in use by a bootconsole. As gsbi driver disables the clock in probe the bootconsole locks up. Turning off hclk's could be dangerous if there are system components like earlyprintk using the hclk. This patch fixes the issue by delegating the clock management to probe and remove functions in gsbi rather than disabling the clock in probe. More detailed problem description can be found here: http://www.spinics.net/lists/linux-arm-msm/msg10589.htmlTested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 23 Sep, 2014 4 commits
-
-
Olof Johansson authored
Merge tag 'fix-v3.17-io-chain-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Regression fix for early omap3 revisions for wake-up events that too some time to narrow down. Although a bit intrusive, this would be good to get into the -rc cycle as there are quite a few boards out there with omap3 es2.1 and es3.0, and we have those in at least three boot test systems too that show errors without this patch. * tag 'fix-v3.17-io-chain-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: OMAP3: Fix I/O chain clock line assertion timed out error Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Few regression fixes for omaps for the -rc cycle: - Fix for omap_l3_noc bus code - Serial console fix for cm-t53 - NAND timings fix for dra7-evm * tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: bus: omap_l3_noc: Fix connID for OMAP4 ARM: dts: cm-t54: fix serial console power supply. ARM: dts: dra7-evm: Fix NAND GPMC timings Signed-off-by: Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merge tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes Keystone Edision dts fix for -rc cycle. Fix the PCIE and USB nodes. * tag 'fixes-v3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: keystone: dts: fix bindings for pcie and usb clock nodes Signed-off-by: Olof Johansson <olof@lixom.net>
-
Shawn Guo authored
Commit 63288b72 ("ARM: imx: fix shared gate clock") attempted to fix an issue with particular enable/disable sequence from two shared gate clocks. But unfortunately, while it partially fixed the issue, it also did something wrong in .is_enabled() function hook. In case of shared gate, the function shouldn't really query the hardware state via share_count, because the function is trying to query the enabling state of the clock in question, not the hardware state which is shared by multiple clocks. Fix the issue by returning the enable_count of the clock itself which is maintained by clock core, in case it's a clock sharing hardware gate with others. As the result, the initialization of share_count per hardware state is not needed now. So remove it. Reported-by: Fabio Estevam <fabio.estevam@freescale.com> Fixes: 63288b72 ("ARM: imx: fix shared gate clock") Cc: <stable@vger.kernel.org> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Olof Johansson <olof@lixom.net>
-
- 16 Sep, 2014 1 commit
-
-
Tony Lindgren authored
We are getting "PRM: I/O chain clock line assertion timed out" errors on early omaps for device tree based booting. This is because we are unconditionally calling reconfigure_io_chain while legacy booting has omap3_has_io_chain_ctrl() checks in place in omap_hwmod.c. For device tree based booting, we are calling reconfigure_io_chain unconditionally from pinctrl framework. So we need to add a check for omap3_has_io_chain_ctrl() to avoid the errors for trying to access a register that does not exist. For es3.0, the documentation in "4.11.2 Device Off-Mode Configuration" just mentions PM_WKEN_WKUP[8] bit. For es3.1, there's a new chapter in documentation for "4.11.2.2 I/O Wake-Up Mechanism" that describes the PM_WKEN_WKUP[16] ST_IO_CHAIN bit. So PM_WKEN_WKUP[16] bit did not get added until in es3.1 probaly to fix issues with flakey wake-up events. We are doing proper checks for ST_IO_CHAIN already in id.c and with omap3_has_io_chain_ctrl(). For more information, see also commit b02b9172 ("ARM: OMAP3: PM: fix I/O wakeup and I/O chain clock control detection"). Let's fix the issue by selecting the right function during init for reconfigure_io_chain depending on the omap revision. For es3.0 and earlier we need to just toggle EN_IO. By doing this, we can move the check for omap3_has_io_chain_ctrl() from omap_hwmod.c to the init code in prm_3xxx.c. And then we can unconditionally call reconfigure_io_chain. Thanks to Paul Walmsley and Nishanth Menon for help with debugging the issue. Fixes: 30a69ef7 ("ARM: OMAP: Move DT wake-up event handling over to use pinctrl-single-omap") Cc: Kevin Hilman <khilman@kernel.org> Cc: Paul Walmsley <paul@pwsan.com> Cc: Tero Kristo <t-kristo@ti.com> Reviewed-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 11 Sep, 2014 3 commits
-
-
Murali Karicheri authored
Fix incorrect clock names for usb1, pcie1 and domain register offset for pcie1 clock nodes on K2E EVM Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
-
Nishanth Menon authored
Commit d4d8819e ("bus: omap_l3_noc: fix masterid detection") did the right thing in dropping the LSB 2 bits which is not part of the ConnID for NTTP master address. However, as part of that change, we should also have ensured that existing list of OMAP4 connID codes are also shifted by 2 bits to ensure that connIDs map to "Table 13-18. ConnID Values" as provided in Technical Reference Manuals for OMAP4430(Rev AP, April 2014, SWPU220AP) and OMAP4460(Rev AB, April 2014, SWPU234AB) Fixes: d4d8819e ("bus: omap_l3_noc: fix masterid detection") Reported-by: Kristian Otnes <kotnes@cisco.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Markus Niebel authored
using LVDS channel 1 on an i.MX53 leads to following error: imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1 This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for reparenting di1 clock to ldb_di1. The value of the mux param comes from device tree port settings. On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations, only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1], respectively) Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com> Fixes: e05c8c9a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi") Cc: <stable@vger.kernel.org> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 10 Sep, 2014 2 commits
-
-
Dmitry Lifshitz authored
LDO8 regulator is used for act led and serial cosole power supply. Its DT status is declared as "disabled", however the serial console was functional until Commit 318dbb02 ("regulator: palmas: Fix SMPS enable/disable/is_enabled") wich properly turns off LDO8 on boot. Fix serial cosole power supply (and act led) on boot by turning LDO8 on. Fixes: 318dbb02 ("regulator: palmas: Fix SMPS enable/disable/is_enabled") Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il> Tested-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
Roger Quadros authored
The nand timings were scaled down by 2 to account for the 2x rate returned by clk_get_rate(gpmc_fclk). As the clock data got fixed by [1], revert back to actual timings (i.e. scale them up by 2). Without this NAND doesn't work on dra7-evm. [1] - commit dd94324b ARM: dts: dra7xx-clocks: Fix the l3 and l4 clock rates Fixes: ff66a3c8 ("ARM: dts: dra7: add support for parallel NAND flash") Cc: <stable@vger.kernel.org> [3.16] Signed-off-by: Roger Quadros <rogerq@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
-
- 09 Sep, 2014 2 commits
-
-
Arnd Bergmann authored
commit a38b1f60 ("ARM: pxa: Add non device-tree timer link to clocksource") introduced a harmless section mismatch warning for all pxa platforms, by introducing a new pxa_timer_init() function that is not marked __init but that calls pxa_timer_nodt_init(), which is. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
-
Tony Lindgren authored
Commit 21278aea ("ARM: use menuconfig for sub-arch menus") improved the sub-arch menus, but accidentally caused new warnings for omap1. This was because the commit added a menu entry around config ARCH_OMAP bool entry where the menu had depends on ARCH_MULTI_V6 || ARCH_MULTI_V7. As ARCH_OMAP is shared between omap1 and omap2plus, let's fix the issue by defining ARCH_OMAP in the shared plat-omap/Kconfig. Fixes: 21278aea ("ARM: use menuconfig for sub-arch menus") Reported-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
- 07 Sep, 2014 11 commits
-
-
Linus Torvalds authored
-
Sudip Mukherjee authored
new link for - How to piss off a Linux kernel subsystem maintainer Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Bolle authored
The NFS/RDMA Kconfig symbol was split into separate options for client and server in commit 2e8c12e1 ("xprtrdma: add separate Kconfig options for NFSoRDMA client and server support"). Update the documentation to reflect this split. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: "J. Bruce Fields" <bfields@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Masanari Iida authored
hpfall.c was renamed to freefall.c in 3.16, but this file still refer to hpfall.c instead of freefall.c Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jose Manuel Alarcon Roldan authored
The example code provided with the i2c device interface documentation won't compile since it uses the reserved word "register" to name a variable. The compiler fails with this error message: error: expected identifier or '(' before '=' token __u8 register = 0x20; /* Device register to access */ ^ Rename the variable "register" to simply "reg" in the example code. Another couple of typos has been fixed as well. [Change "! =" to "!=".] Signed-off-by: Jose Alarcon Roldan <jose.alarcon.roldan@gmail.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Rob Jones authored
Despite the fact that these functions have been around for years, they are little used (only 15 uses in 13 files at the preseht time) even though many other files use work-arounds to achieve the same result. By documenting them, hopefully they will become more widely used. Signed-off-by: Rob Jones <rob.jones@codethink.co.uk> Acked-by: Steven Whitehouse <swhiteho@redhat.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pmLinus Torvalds authored
Pull ACPI and power management fixes from Rafael Wysocki: "These are regression fixes (ACPI sysfs, ACPI video, suspend test), ACPI cpuidle deadlock fix, missing runtime validation of ACPI _DSD output, a fix and a new CPU ID for the RAPL driver, new blacklist entry for the ACPI EC driver and a couple of trivial cleanups (intel_pstate and generic PM domains). Specifics: - Fix for recently broken test_suspend= command line argument (Rafael Wysocki). - Fixes for regressions related to the ACPI video driver caused by switching the default to native backlight handling in 3.16 from Hans de Goede. - Fix for a sysfs attribute of ACPI device objects that returns stale values sometimes due to the fact that they are cached instead of executing the appropriate method (_SUN) every time (broken in 3.14). From Yasuaki Ishimatsu. - Fix for a deadlock between cpuidle_lock and cpu_hotplug.lock in the ACPI processor driver from Jiri Kosina. - Runtime output validation for the ACPI _DSD device configuration object missing from the support for it that has been introduced recently. From Mika Westerberg. - Fix for an unuseful and misleading RAPL (Running Average Power Limit) domain detection message in the RAPL driver from Jacob Pan. - New Intel Haswell CPU ID for the RAPL driver from Jason Baron. - New Clevo W350etq blacklist entry for the ACPI EC driver from Lan Tianyu. - Cleanup for the intel_pstate driver and the core generic PM domains code from Gabriele Mazzotta and Geert Uytterhoeven" * tag 'pm+acpi-3.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock ACPI / scan: not cache _SUN value in struct acpi_device_pnp cpufreq: intel_pstate: Remove unneeded variable powercap / RAPL: change domain detection message powercap / RAPL: add support for CPU model 0x3f PM / domains: Make generic_pm_domain.name const PM / sleep: Fix test_suspend= command line option ACPI / EC: Add msi quirk for Clevo W350etq ACPI / video: Disable native_backlight on HP ENVY 15 Notebook PC ACPI / video: Add a disable_native_backlight quirk ACPI / video: Fix use_native_backlight selection logic ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull filesystem fixes from Al Viro: "Several bugfixes (all of them -stable fodder). Alexey's one deals with double mutex_lock() in UFS (apparently, nobody has tried to test "ufs: sb mutex merge + mutex_destroy" on something like file creation/removal on ufs). Mine deal with two kinds of umount bugs, in umount propagation and in handling of automounted submounts, both resulting in bogus transient EBUSY from umount" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: ufs: fix deadlocks introduced by sb mutex merge fix EBUSY on umount() from MNT_SHRINKABLE get rid of propagate_umount() mistakenly treating slaves as busy.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RCU fix from Ingo Molnar: "A boot hang fix for the offloaded callback RCU model (RCU_NOCB_CPU=y && (TREE_CPU=y || TREE_PREEMPT_RC)) in certain bootup scenarios" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: rcu: Make nocb leader kthreads process pending callbacks after spawning
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Three fixlets from the timer departement: - Update the timekeeper before updating vsyscall and pvclock. This fixes the kvm-clock regression reported by Chris and Paolo. - Use the proper irq work interface from NMI. This fixes the regression reported by Catalin and Dave. - Clarify the compat_nanosleep error handling mechanism to avoid future confusion" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Update timekeeper before updating vsyscall and pvclock compat: nanosleep: Clarify error handling nohz: Restore NMI safe local irq work for local nohz kick
-
Alexey Khoroshilov authored
Commit 0244756e ("ufs: sb mutex merge + mutex_destroy") introduces deadlocks in ufs_new_inode() and ufs_free_inode(). Most callers of that functions acqure the mutex by themselves and ufs_{new,free}_inode() do that via lock_ufs(), i.e we have an unavoidable double lock. The patch proposes to resolve the issue by making sure that ufs_{new,free}_inode() are not called with the mutex held. Found by Linux Driver Verification project (linuxtesting.org). Cc: stable@vger.kernel.org # 3.16 Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-
- 06 Sep, 2014 6 commits
-
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: "A smattering of bug fixes across most architectures" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: powerpc/kvm/cma: Fix panic introduces by signed shift operation KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags KVM: s390/mm: Fix storage key corruption during swapping arm/arm64: KVM: Complete WFI/WFE instructions ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU KVM: s390/mm: try a cow on read only pages for key ops KVM: s390: Fix user triggerable bug in dead code
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Kevin Hilman: "Another round of fixes from arm-soc land, which are mostly DT fixes for: - OMAP: handful of DT fixes devices on newly supported hardware - davinci: fix 2nd EDMA channel - ux500: extend previous pinctrl fix to another board - at91: clock registration fixes, compatibility string precision And one more fix for event cleanup in drivers/bus/arm-ccn" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: bus: arm-ccn: Move event cleanup routine ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver ARM: dts: dra7-evm: Add vtt regulator support ARM: dts: dra7-evm: Fix spi1 mux documentation ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8 ARM: dts: am4372: fix USB regs size ARM: dts: am437x-gp: switch i2c0 to 100KHz ARM: dts: dra7-evm: Fix 8th NAND partition's name ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency ARM: ux500: disable msp2 node on Snowball ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
-
git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfsLinus Torvalds authored
Pull xfs fixes from Dave Chinner: "The fixes all address recently discovered data corruption issues. The original Direct IO issue was discovered by Chris Mason @ Facebook on a production workload which mixed buffered reads with direct reads and writes IO to the same file. The fix for that exposed other issues with page invalidation (exposed by millions of fsx operations) failing due to dirty buffers beyond EOF. Finally, the collapse_range code could also cause problems due to racing writeback changing the extent map while it was being shifted around. The commits for that problem are simple mitigation fixes that prevent the problem from occuring. A more robust fix for 3.18 that addresses the underlying problem is currently being worked on by Brian. Summary of fixes: - a direct IO read/buffered read data corruption - the associated fallout from the DIO data corruption fix - collapse range bugs that are potential data corruption issues" * tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: xfs: trim eofblocks before collapse range xfs: xfs_file_collapse_range is delalloc challenged xfs: don't log inode unless extent shift makes extent modifications xfs: use ranged writeback and invalidation for direct IO xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't zero partial page cache pages during O_DIRECT writes xfs: don't dirty buffers beyond EOF
-
git://git.infradead.org/linux-mtdLinus Torvalds authored
Pull mtd fixes from Brian Norris: "Two trivial MTD updates for 3.17-rc4: - a tiny comment tweak, to kill a bunch of DocBook warnings added during the merge window - a small fixup to the OTP routines' error handling" * tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd: mtd: nand: fix DocBook warnings on nand_sdr_timings doc mtd: cfi_cmdset_0002: check return code for get_chip()
-
Thomas Gleixner authored
The update_walltime() code works on the shadow timekeeper to make the seqcount protected region as short as possible. But that update to the shadow timekeeper does not update all timekeeper fields because it's sufficient to do that once before it becomes life. One of these fields is tkr.base_mono. That stays stale in the shadow timekeeper unless an operation happens which copies the real timekeeper to the shadow. The update function is called after the update calls to vsyscall and pvclock. While not correct, it did not cause any problems because none of the invoked update functions used base_mono. commit cbcf2dd3 (x86: kvm: Make kvm_get_time_and_clockread() nanoseconds based) changed that in the kvm pvclock update function, so the stale mono_base value got used and caused kvm-clock to malfunction. Put the update where it belongs and fix the issue. Reported-by: Chris J Arges <chris.j.arges@canonical.com> Reported-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanosSigned-off-by: Thomas Gleixner <tglx@linutronix.de>
-
Thomas Gleixner authored
The error handling in compat_sys_nanosleep() is correct, but completely non obvious. Document it and restrict it to the -ERESTART_RESTARTBLOCK return value for clarity. Reported-by: Kees Cook <keescook@chromium.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
-
- 05 Sep, 2014 10 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linuxLinus Torvalds authored
Pull i2c bugfixes from Wolfram Sang: "I2C driver bugfixes for the 3.17 release. Details can be found in the commit messages, yet I think this is typical driver stuff" * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: Revert "i2c: rcar: remove spinlock" i2c: at91: add bound checking on SMBus block length bytes i2c: rk3x: fix bug that cause transfer fails in master receive mode i2c: at91: Fix a race condition during signal handling in at91_do_twi_xfer. i2c: mv64xxx: continue probe when clock-frequency is missing i2c: rcar: fix MNR interrupt handling
-
git://github.com/at91linux/linux-at91Kevin Hilman authored
Merge "at91: fixes for 3.17 #1" from Nicols Ferre: First AT91 fixes batch for 3.17: - compatibility string precision - clock registration and USB DT fix for at91rm9200 * tag 'at91-fixes' of git://github.com/at91linux/linux-at91: ARM: at91/dt: rm9200: fix usb clock definition ARM: at91: rm9200: fix clock registration ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver Signed-off-by: Kevin Hilman <khilman@linaro.org>
-
Pawel Moll authored
The function cleaning up an initialized event was called from the "event_del" handler, instead of being used as the "destroy" callback. In case of events group allocation this caused NULL pointer dereference (as events are added and deleted multiple times then). Fixed now. Signed-off-by: Pawel Moll <mail@pawelmoll.com> Signed-off-by: Kevin Hilman <khilman@linaro.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k updates from Geert Uytterhoeven: "Wire up new syscalls getrandom and memfd_create" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Wire up memfd_create m68k: Wire up getrandom
-
Alexandre Belloni authored
The atmel,clk-divisors property is taking 4 divisors, if less are provided, the clock registration will fail. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Alexandre Belloni authored
Actually register clocks from device tree when using the common clock framework. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> [nicolas.ferre@atmel.com: add at91 to function name] Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Gaël PORTAY authored
The at91sam9g20 SOC uses its own pllb implementation which is different from the one inherited from at91sam9260 SOC. Signed-off-by: Gaël PORTAY <gael.portay@gmail.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-
Johannes Weiner authored
Dave Hansen reports a massive scalability regression in an uncontained page fault benchmark with more than 30 concurrent threads, which he bisected down to 05b84301 ("mm: memcontrol: use root_mem_cgroup res_counter") and pin-pointed on res_counter spinlock contention. That change relied on the per-cpu charge caches to mostly swallow the res_counter costs, but it's apparent that the caches don't scale yet. Revert memcg back to bypassing res_counters on the root level in order to restore performance for uncontained workloads. Reported-by: Dave Hansen <dave@sr71.net> Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Tested-by: Dave Hansen <dave.hansen@intel.com> Acked-by: Michal Hocko <mhocko@suse.cz> Acked-by: Vladimir Davydov <vdavydov@parallels.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anton Altaparmakov authored
This patch changes sync_filesystem() to be EXPORT_SYMBOL(). The reason this is needed is that starting with 3.15 kernel, due to Theodore Ts'o's commit 02b9984d ("fs: push sync_filesystem() down to the file system's remount_fs()"), all file systems that have dirty data to be written out need to call sync_filesystem() from their ->remount_fs() method when remounting read-only. As this is now a generically required function rather than an internal only function it should be EXPORT_SYMBOL() so that all file systems can call it. Signed-off-by: Anton Altaparmakov <aia21@cantab.net> Acked-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulatorLinus Torvalds authored
Pull regulator documentation fixes from Mark Brown: "All the fixes people have found for the regulator API have been documentation fixes, avoiding warnings while building the kerneldoc, fixing some errors in one of the DT bindings documents and fixing some typos in the header" * tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: fix kernel-doc warnings in header files regulator: Proofread documentation regulator: tps65090: Fix tps65090 typos in example
-