- Apple Magic Keyboard support improvements (José Expósito, Alex Henrie,
  Benjamin Berg)

- support for USI style pens (Tero Kristo, Mika Westerberg)
- quirk for devices that need inverted X/Y axes (Alistair Francis)
- small core code cleanups and deduplication (Benjamin Tissoires)

The command ./scripts/kernel-doc -none include/linux/hid.h reports:

  include/linux/hid.h:818: warning: cannot understand function prototype: 'struct hid_ll_driver '
  include/linux/hid.h:1135: warning: expecting prototype for hid_may_wakeup(). Prototype was for hid_hw_may_wakeup() instead

Address those kernel-doc warnings.
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

This function had kernel-doc that not used a hash to separate
the function name from the one line description.

The warning was found by running scripts/kernel-doc, which is
caused by using 'make W=1'.

drivers/hid/intel-ish-hid/ishtp-fw-loader.c:271: warning: This comment
starts with '/**', but isn't a kernel-doc comment. Refer
Documentation/doc-guide/kernel-doc.rst
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Specify that both TGL and ADL don't support DMA cache snooping.
Signed-off-by: Ye Xiang <xiang.ye@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The function performs a check on the hdev input parameters, however, it
is used before the check.

Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.

Fixes: 9614219e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443763 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The function performs a check on its input parameters, however, the
hdev parameter is used before the check.

Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.

Fixes: 9614219e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443804 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The function performs a check on the hdev input parameters, however, it
is used before the check.

Initialize the udev variable after the sanity check to avoid a
possible NULL pointer dereference.

Fixes: 9614219e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443827 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The function performs a check on its input parameters, however, the
hdev parameter is used before the check.

Initialize the stack variables after checking the input parameters to
avoid a possible NULL pointer dereference.

Fixes: 9614219e ("HID: uclogic: Extract tablet parameter discovery into a module")
Addresses-Coverity-ID: 1443831 ("Null pointer dereference")
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Use the function key table introduced for the Magic Keyboard 2021
without fingerprint reader in the models with fingerprint reader and/or
numpad.

Tested with the ANSI variant of the keyboard with and without numpad.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The new 2021 apple models have a different FN key assignment. Add a new
translation table and use that for the 2021 magic keyboard.
Signed-off-by: Benjamin Berg <bberg@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The Apple Magic Trackpad 2021 (3rd generation) has the same product ID
as the 2nd generation. However, when connected through Bluetooth, the
version has changed from 0x107 to 0x110.

The other meaningful change is that the name has dropped the generation
number and now it is just "Apple Inc. Magic Trackpad", like the first
generation model.

Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

If the Apple Magic Trackpad 2 has been connected to a Mac, the name
is automatically personalized showing its owner name. For example:
"José Expósito's Trackpad".

When connected through Bluetooth, the personalized name is reported,
however, when connected through USB the generic name is reported.

Set the device name correctly to ensure the same driver settings are
loaded, whether connected via Bluetooth or USB.
Signed-off-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Signed-off-by: Alex Henrie <alexhenrie24@gmail.com>
Tested-by: José Expósito <jose.exposito89@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

The return value of devm_kzalloc() needs to be checked.
To avoid hdev->dev->driver_data to be null in case of the failure of
alloc.

Fixes: 14c9c014 ("HID: add vivaldi HID driver")
Cc: stable@vger.kernel.org
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211215083605.117638-1-jiasheng@iscas.ac.cn

An overlook from the previous commit: we don't even parse or start the
device, meaning that the device is not presented to user space.

Fixes: 93020953 ("HID: check for valid USB device for many HID drivers")
Cc: stable@vger.kernel.org
Link: https://bugs.archlinux.org/task/73048
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215341
Link: https://lore.kernel.org/r/e4efbf13-bd8d-0370-629b-6c80c0044b15@leemhuis.info/Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Allow the touchscreen-inverted-x/y device tree properties to control the
HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirks for the hid-input device.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Acked-by: Rob Herring <robh@kernel.org>
[bentiss: silence checkpatch warnings]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-3-alistair@alistair23.me

Add a HID_QUIRK_X_INVERT/HID_QUIRK_Y_INVERT quirk that can be used
to invert the X/Y values.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[bentiss: silence checkpatch warning]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211208124045.61815-2-alistair@alistair23.me

Add USI defined usages to the HID debug code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-6-tero.kristo@linux.intel.com

This function is not called outside of hid-input.c so we can make it
static.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-5-tero.kristo@linux.intel.com

Add usage codes for USI style pens, based on the USB-HID usage table:
    https://usb.org/document-library/hid-usage-tables-122

See chapter 16, Digitizers Page (0x0D)
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-4-tero.kristo@linux.intel.com

This and HID_DG_STYLUS are pretty much the same thing so add suffix for
HID_DG_PEN too. This makes the input device name look better.

While doing this, remove the suffix override from hid-multitouch, as it
is now handled by hid-input. Also, the suffix override done by
hid-multitouch was wrong, as it mapped HID_DG_PEN => "Stylus" and
HID_DG_STYLUS => "Pen".
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
[bentiss: amended to keep the same name for hid-multitouch devices]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-3-tero.kristo@linux.intel.com

Since we are going to have more MSC events too, add map_msc() that can
be used to fill in necessary fields and avoid boilerplate code.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Tero Kristo <tero.kristo@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211210111138.1248187-2-tero.kristo@linux.intel.com

Battery status is reported for the Asus UX550VE touchscreen even though
it does not have a battery. Prevent it from always reporting the
battery as low.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1897823Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Fixes spurious wakeups from s0ix on Lenovo ThinkPad X1 Cargon Gen 9 on
lid close.

These wakeups are generated by interrupts from the ISH on changes to the
lid status.

By disabling the wake IRQ from the ISH we inhibit these spurious
wakeups while keeping the resume from LID open through the ACPI
interrupt.

Reports on the Lenovo forums indicate that Lenovo ThinkPad X1 Yoga Gen6
is also affected.

Fixes: ae02e5d4 ("HID: intel-ish-hid: ipc layer")
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214855Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211130060117.3026-1-linux@weissschuh.net

Add one additional hammer-like device.
Signed-off-by: xiazhengqiao <xiazhengqiao@huaqin.corp-partner.google.com>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203030119.28612-1-xiazhengqiao@huaqin.corp-partner.google.com

The prodikeys HID driver only controls USB devices, yet did not have a
dependancy on USB_HID.  This causes build errors on some configurations
like nios2 when building due to new changes to the prodikeys driver.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203081231.2856936-1-gregkh@linuxfoundation.org

The chicony HID driver only controls USB devices, yet did not have a
dependancy on USB_HID.  This causes build errors on some configurations
like sparc when building due to new changes to the chicony driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: stable@vger.kernel.org
Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211203075927.2829218-1-gregkh@linuxfoundation.org

We don't gain much by having them as inline, and it
actually prevents us to attach a probe to those helpers.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-5-benjamin.tissoires@redhat.com

There is a lot of duplication of code in the HID low level drivers.
Better have everything in one place so we can eventually extend it
in a generic way.
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-4-benjamin.tissoires@redhat.com

When emulating the device through uhid, there is a chance we don't have
output reports and so report_field is null.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-3-benjamin.tissoires@redhat.com

When the setup of the GHL fails, we are not calling hid_hw_stop().
This leads to the hidraw node not being released, meaning a crash
whenever somebody attempts to open the file.

Cc: stable@vger.kernel.org
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/20211202095334.14399-2-benjamin.tissoires@redhat.com

Some HID drivers are only for USB drivers, yet did not depend on
CONFIG_USB_HID.  This was hidden by the fact that the USB functions were
stubbed out in the past, but now that drivers are checking for USB
devices properly, build errors can occur with some random
configurations.
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211202114819.2511954-1-gregkh@linuxfoundation.org

Many HID drivers assume that the HID device assigned to them is a USB
device as that was the only way HID devices used to be able to be
created in Linux.  However, with the additional ways that HID devices
can be created for many different bus types, that is no longer true, so
properly check that we have a USB device associated with the HID device
before allowing a driver that makes this assumption to claim it.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: Michael Zaidman <michael.zaidman@gmail.com>
Cc: Stefan Achatz <erazor_de@users.sourceforge.net>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
[bentiss: amended for thrustmater.c hunk to apply]
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-3-gregkh@linuxfoundation.org

The wacom driver accepts devices of more than just USB types, but some
code paths can cause problems if the device being controlled is not a
USB device due to a lack of checking.  Add the needed checks to ensure
that the USB device accesses are only happening on a "real" USB device,
and not one on some other bus.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-2-gregkh@linuxfoundation.org

A number of HID drivers already call hid_is_using_ll_driver() but only
for the detection of if this is a USB device or not.  Make this more
obvious by creating hid_is_usb() and calling the function that way.

Also converts the existing hid_is_using_ll_driver() functions to use the
new call.

Cc: Jiri Kosina <jikos@kernel.org>
Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Cc: linux-input@vger.kernel.org
Cc: stable@vger.kernel.org
Tested-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20211201183503.2373082-1-gregkh@linuxfoundation.org

Add a HID_QUIRK_NO_INIT_REPORTS quirk for the
Microsoft Surface 3 (non pro) type-cover.

Trying to init the reports seems to confuse the type-cover and
causes 2 issues:

1. Despite hid-multitouch sending the command to switch the
touchpad to multitouch mode, it keeps sending events on the
mouse emulation interface.

2. The touchpad completely stops sending events after a reboot.

Adding the HID_QUIRK_NO_INIT_REPORTS quirk fixes both issues.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull HID fixes from Jiri Kosina:

 - fix for Intel-ISH driver to make sure it gets aoutoloaded only on
   matching devices and not universally (Thomas Weißschuh)

 - fix for Wacom driver reporting invalid contact under certain
   circumstances (Jason Gerecke)

 - probing fix for ft260 dirver (Michael Zaidman)

 - fix for generic keycode remapping (Thomas Weißschuh)

 - fix for division by zero in hid-magicmouse (Claudia Pellegrino)

 - other tiny assorted fixes and new device IDs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: multitouch: Fix Iiyama ProLite T1931SAW (0eef:0001 again!)
  HID: nintendo: eliminate dead datastructures in !CONFIG_NINTENDO_FF case
  HID: magicmouse: prevent division by 0 on scroll
  HID: thrustmaster: fix sparse warnings
  HID: Ignore battery for Elan touchscreen on HP Envy X360 15-eu0xxx
  HID: input: set usage type to key on keycode remap
  HID: input: Fix parsing of HID_CP_CONSUMER_CONTROL fields
  HID: ft260: fix i2c probing for hwmon devices
  Revert "HID: hid-asus.c: Maps key 0x35 (display off) to KEY_SCREENLOCK"
  HID: intel-ish-hid: fix module device-id handling
  mod_devicetable: fix kdocs for ishtp_device_id
  HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts
  HID: nintendo: unlock on error in joycon_leds_create()
  platform/x86: isthp_eclite: only load for matching devices
  platform/chrome: chros_ec_ishtp: only load for matching devices
  HID: intel-ish-hid: hid-client: only load for matching devices
  HID: intel-ish-hid: fw-loader: only load for matching devices
  HID: intel-ish-hid: use constants for modaliases
  HID: intel-ish-hid: add support for MODULE_DEVICE_TABLE()

Pull SELinux fix from Paul Moore:
 "A fix to make sure things are handled correctly when an allocation
  fails"

* tag 'selinux-pr-20211123' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
  selinux: fix NULL-pointer dereference when hashtab allocation fails