This will e.g. make 'sshd restart' work when MPTCP is used, as we will
now set this option on the listener socket instead of only the mptcp
socket (where it has no effect).

We still need to copy the setting to the master socket so that a
subsequent getsockopt() returns the expected value.
Reported-by: Christoph Paasch <cpaasch@apple.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

setsockopt(mptcp_fd, SOL_SOCKET, ...)...  appears to work (returns 0),
but it has no effect -- this is because the MPTCP layer never has a
chance to copy the settings to the subflow socket.

Skip the generic handling for the mptcp case and instead call the
mptcp specific handler instead for SOL_SOCKET too.

Next patch adds more specific handling for SOL_SOCKET to mptcp.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before, clang version 9 threw errors such as: error:
use of GNU old-style field designator extension [-Werror,-Wgnu-designator]
                { tstamp: true, swtstamp: true }
                  ^~~~~~~
                  .tstamp =
Fix these warnings in tools/testing/selftests/net in the same manner as
commit 121e357a ("selftests/harness: Update named initializer syntax").
N.B. rxtimestamp.c is the only affected file in the directory.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Sudarsana Reddy Kalluru says:

====================
bnx2x: Perform IdleChk dump.

Idlechk test verifies that the chip is in idle state. If there are any
errors, Idlechk dump would capture the same. This data will help in
debugging the device related issues.
The patch series adds driver support for dumping IdleChk data during the
debug dump collection.
Patch (1) adds register definitions required in this implementation.
Patch (2) adds the implementation for Idlechk tests.
Patch (3) adds driver changes to invoke Idlechk implementation.

Changes from previous version:
-------------------------------
v3: Combined the test data creation and implementation to a single patch.
v2: Addressed issues reported by kernel test robot.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds driver changes to perform Idlechk dump during the debug
data collection.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch populates a database of idlechk tests (registers and
predicates) and performs the idlechk using this data.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The patch adds register definitions required for Idlechk implementation.
Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Daniel Borkmann says:

====================
pull-request: bpf-next 2020-07-04

The following pull-request contains BPF updates for your *net-next* tree.

We've added 73 non-merge commits during the last 17 day(s) which contain
a total of 106 files changed, 5233 insertions(+), 1283 deletions(-).

The main changes are:

1) bpftool ability to show PIDs of processes having open file descriptors
   for BPF map/program/link/BTF objects, relying on BPF iterator progs
   to extract this info efficiently, from Andrii Nakryiko.

2) Addition of BPF iterator progs for dumping TCP and UDP sockets to
   seq_files, from Yonghong Song.

3) Support access to BPF map fields in struct bpf_map from programs
   through BTF struct access, from Andrey Ignatov.

4) Add a bpf_get_task_stack() helper to be able to dump /proc/*/stack
   via seq_file from BPF iterator progs, from Song Liu.

5) Make SO_KEEPALIVE and related options available to bpf_setsockopt()
   helper, from Dmitry Yakunin.

6) Optimize BPF sk_storage selection of its caching index, from Martin
   KaFai Lau.

7) Removal of redundant synchronize_rcu()s from BPF map destruction which
   has been a historic leftover, from Alexei Starovoitov.

8) Several improvements to test_progs to make it easier to create a shell
   loop that invokes each test individually which is useful for some CIs,
   from Jesper Dangaard Brouer.

9) Fix bpftool prog dump segfault when compiled without skeleton code on
   older clang versions, from John Fastabend.

10) Bunch of cleanups and minor improvements, from various others.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Matteo Croce says:

====================
mvpp2: XDP support

Add XDP support to mvpp2. This series converts the driver to the
page_pool API for RX buffer management, and adds native XDP support.

XDP support comes with extack error reporting and statistics as well.

These are the performance numbers, as measured by Sven:

SKB fwd page pool:
Rx bps     390.38 Mbps
Rx pps     762.46 Kpps

XDP fwd:
Rx bps     1.39 Gbps
Rx pps     2.72 Mpps

XDP Drop:
eth0: 12.9 Mpps
eth1: 4.1 Mpps
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Add ethtool statistics for XDP.
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the transmit part of XDP support, which includes:
- support for XDP_TX in mvpp2_xdp()
- .ndo_xdp_xmit hook for AF_XDP and XDP_REDIRECT with mvpp2 as destination

mvpp2_xdp_submit_frame() is a generic function which is called by
mvpp2_xdp_xmit_back() when doing XDP_TX, and by mvpp2_xdp_xmit when
doing AF_XDP or XDP_REDIRECT target.

The buffer allocation has been reworked to be able to map the buffers
as DMA_FROM_DEVICE or DMA_BIDIRECTIONAL depending if native XDP is
in use or not.
Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add XDP native support.
By now only XDP_DROP, XDP_PASS and XDP_REDIRECT
verdicts are supported.
Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use the page_pool API for memory management.
This is a prerequisite for native XDP support.
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In mvpp2_swf_bm_pool_init_percpu(), a reference to a struct
mvpp2_bm_pool is obtained traversing multiple structs, when a
local variable already points to the same object.

Fix it and, while at it, give the variable a meaningful name.
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add the options --ipv4, --ipv6 to specify running over ipv4 and/or
ipv6. If neither is specified, then run both.
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alex Elder says:

====================
net: ipa: fix HOLB timer register use

The function ipa_reg_init_hol_block_timer_val() generates the value
to write into the HOL_BLOCK_TIMER endpoint configuration register,
to represent a given timeout value (in microseconds).  It only
supports a timer value of 0 though, in part because that's
sufficient, but mainly because there was some confusion about
how the register is formatted in newer hardware.

I got clarification about the register format, so this series fixes
ipa_reg_init_hol_block_timer_val() to work for any supported delay
value.

The delay is based on the IPA core clock, so determining the value
to write for a given period requires access to the current core
clock rate.  So the first patch just creates a new function to
provide that.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

For IPA v4.2, the exact interpretation of the register that defines
the timeout for avoiding head-of-line blocking was a little unclear.
We're only assigning a 0 timeout to it right now, so that wasn't
very important.  But now that I know how it's supposed to work, I'm
fixing it.

The register represents a tick counter, where each tick is equal to
128 IPA core clock cycles.  For IPA v3.5.1, the register contains
a simple counter value.  But for IPA v4.2, the register contains two
fields, base and scale, which approximate the tick counter as:
    ticks = base << scale
The base and scale values to use for a given tick count are computed
using clever bit operations, and measures are taken to make the
resulting time period as close as possible to that requested.

There's no need for ipa_endpoint_init_hol_block_timer() to return
an error, so change its return type to void.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Create a new function that returns the current rate of the IPA core
clock.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

IPv6 ping sockets route based on fwmark, but do not yet set skb->mark.
Add this. IPv4 ping sockets also do both.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

BPF selftests show a compilation error as follows:

  libbpf: invalid relo for 'entries' in special section 0xfff2; forgot to
  initialize global var?..

Fix it by initializing 'entries' to zeros.

Fixes: c7568114 ("selftests/bpf: Add bpf_iter test with bpf_get_task_stack()")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200703181719.3747072-1-songliubraving@fb.com

Fix segfault from bpftool by adding emit_obj_refs_plain when skeleton
code is disabled.

Tested by deleting BUILD_BPF_SKELS in Makefile. We found this doing
backports for Cilium when a testing image pulled in latest bpf-next
bpftool, but kept using an older clang-7.

  # ./bpftool prog show
  Error: bpftool built without PID iterator support
  3: cgroup_skb  tag 7be49e3934a125ba  gpl
          loaded_at 2020-07-01T08:01:29-0700  uid 0
  Segmentation fault

Fixes: d53dee3f ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Reported-by: Joe Stringer <joe@wand.net.nz>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/159375071997.14984.17404504293832961401.stgit@john-XPS-13-9370

This adds kernel TX timestamps to the xen-netfront driver.  Tested with chrony
on an AWS EC2 instance.
Signed-off-by: Daniel Drown <dan-netdev@drown.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The GENET driver interfaces with internal MoCA interface as well as
external MoCA chips like the BCM6802/6803 through a fixed link
interface. It is desirable for the mocad user-space daemon to be able to
control the carrier state based upon out of band messages that it
receives from the MoCA chip.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-updates-2020-07-02

Rx and Tx devlink health reporters enhancements.

1) Code cleanup
2) devlink output format improvements
3) Print more useful info on devlink health diagnose output
4) TX timeout recovery, on a single SQ recover failure, stop the loop
and reset all rings (re-open netdev).
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Upon a TX timeout handle, if the TX reporter was not able to recover
from the error, reopen the channels. If tried to reopen channels, do not
loop over TX queues for timeout.

With that, the reporters state and separation will better
expose the driver's state.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When the RQ is in striding RQ mode, it uses the ICOSQ as a helper queue.
In this mode, RX reporter dumps more info about the ICOSQ and its
related CQ.

$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
    RQ:
      type: 2 stride size: 2048 size: 8
      CQ:
        stride size: 64 size: 1024
RQs:
    channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7
    CQ:
      cqn: 1032 HW status: 0 ci: 0 size: 1024
    EQ:
      eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048
    ICOSQ:
      sqn: 2411 HW state: 1 cc: 74 pc: 74 WQE size: 128
      CQ:
        cqn: 1029 cc: 8 size: 128
    channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7
    CQ:
      cqn: 1036 HW status: 0 ci: 0 size: 1024
    EQ:
      eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048
    ICOSQ:
      sqn: 2416 HW state: 1 cc: 74 pc: 74 WQE size: 128
      CQ:
        cqn: 1033 cc: 8 size: 128
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Enhance TX/RX reporter's diagnose to include info about the
corresponding EQ.

$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
    RQ:
      type: 2 stride size: 2048 size: 8
      CQ:
        stride size: 64 size: 1024
RQs:
    channel ix: 0 rqn: 1713 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
     CQ:
       cqn: 1032 HW status: 0 ci: 0 size: 1024
     EQ:
       eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048
     channel ix: 1 rqn: 1718 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
     CQ:
       cqn: 1036 HW status: 0 ci: 0 size: 1024
     EQ:
       eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048

$ devlink health diagnose pci/0000:00:0b.0 reporter tx
Common Config:
    SQ:
      stride size: 64 size: 1024
      CQ:
        stride size: 64 size: 1024
SQs:
   channel ix: 0 tc: 0 txq ix: 0 sqn: 1712 HW state: 1 stopped: false cc: 91 pc: 91
   CQ:
     cqn: 1030 HW status: 0 ci: 91 size: 1024
   EQ:
     eqn: 7 irqn: 42 vecidx: 1 ci: 93 size: 2048
   channel ix: 1 tc: 0 txq ix: 1 sqn: 1717 HW state: 1 stopped: false cc: 0 pc: 0
   CQ:
     cqn: 1034 HW status: 0 ci: 0 size: 1024
   EQ:
     eqn: 8 irqn: 43 vecidx: 2 ci: 2 size: 2048
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add CQ's consumer index and size to the CQ's diagnose output retruved on
RX/TX reporter diadgnose.

$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
    RQ:
      type: 2 stride size: 2048 size: 8
      CQ:
        stride size: 64 size: 1024
RQs:
    channel ix: 0 rqn: 2413 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
    CQ:
      cqn: 1032 HW status: 0 ci: 0 size: 1024
    channel ix: 1 rqn: 2418 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
    CQ:
      cqn: 1036 HW status: 0 ci: 0 size: 1024

$ devlink health diagnose pci/0000:00:0b.0 reporter tx
Common Config:
    SQ:
      stride size: 64 size: 1024
      CQ:
        stride size: 64 size: 1024
SQs:
    channel ix: 0 tc: 0 txq ix: 0 sqn: 2412 HW state: 1 stopped: false cc: 0 pc: 0
    CQ:
      cqn: 1030 HW status: 0 ci: 0 size: 1024
    channel ix: 1 tc: 0 txq ix: 1 sqn: 2417 HW state: 1 stopped: false cc: 5 pc: 5
    CQ:
      cqn: 1034 HW status: 0 ci: 5 size: 1024
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Change prefix to match resident file:
%s/mlx5e_reporter_cq_diagnose/mlx5e_health_cq_diag_fmsg
%s/mlx5e_reporter_cq_common_diagnose/mlx5e_health_cq_common_diag_fmsg
%s/mlx5e_reporter_named_obj_nest_start/mlx5e_health_fmsg_named_obj_nest_start
%s/mlx5e_reporter_named_obj_nest_end/mlx5e_health_fmsg_named_obj_nest_end
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add a helper which retrieves the RQ's WQE counter. Use this helper in
the RX reporter diagnose callback.

$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
  RQ:
     type: 2 stride size: 2048 size: 8
     CQ:
      stride size: 64 size: 1024
RQs:
   channel ix: 0 rqn: 2113 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
   CQ:
    cqn: 1032 HW status: 0
   channel ix: 1 rqn: 2118 HW state: 1 SW state: 5 WQE counter: 7 posted WQEs: 7 cc: 7 ICOSQ HW state: 1
   CQ:
    cqn: 1036 HW status: 0
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Add helper which retrieves the RQ WQE's head. Use this helper in RX
reporter diagnose callback.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Use txrx.h to contain helper function regarding TX/RX. In the coming
patches, I will add more RQ helpers.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Change the hierarchy of the RX reporter 'Common config' in the diagnose
output to match the 'Common config' of the TX reporter which reflects
that CQ is a helper to the traffic queues.

Before:
$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
    RQ:
      type: 2 stride size: 2048 size: 8
    CQ:
      stride size: 64 size: 1024
    RQs:
    ...

After:
$ devlink health diagnose pci/0000:00:0b.0 reporter rx
Common config:
    RQ:
      type: 2 stride size: 2048 size: 8
      CQ:
        stride size: 64 size: 1024
    RQs:
    ...
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

When received a CQE error, the driver inspect the syndrome given by the
firmware. RQ recovery is initiated only as a result of a fatal syndrome;
syndrome which set the RQ into an error state. Hence no need to query
the RQ state at the beginning of the recovery process. Add additional
debug prints before recovering.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

During queue's recovery, driver waits for flush. The flush timeout is
set to 2 seconds. Add a define for this value for the benefit of RX and
TX reporters.
Signed-off-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Creation of devlink health reporters is not fatal for mlx5e instance load.
In case of error in reporter's creation, the return value is ignored.
Change all reporters creation functions to return void.

In addition, with this change, a failure in creating a reporter, will not
prevent the driver from trying to create the next reporter in the list.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Aya Levin <ayal@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Without CONFIG_STACKTRACE stack_trace_save_tsk() is not defined. Let
get_callchain_entry_for_task() to always return NULL in such cases.

Fixes: fa28dcb8 ("bpf: Introduce helper bpf_get_task_stack()")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200703024537.79971-1-songliubraving@fb.com

Edward Cree says:

====================
sfc: prerequisites for EF100 driver, part 3

Continuing on from [1] and [2], this series assembles the last pieces
 of the common codebase that will be used by the forthcoming EF100
 driver.
Patch #1 also adds a minor feature to EF10 (setting MTU on VFs) since
 EF10 supports the same MCDI extension which that feature will use on
 EF100.
Patches #5 & #7, while they should have no externally-visible effect
 on driver functionality, change how that functionality is implemented
 and how the driver represents TXQ configuration internally, so are
 not mere cleanup/refactoring like most of these prerequisites have
 (from the perspective of the existing sfc driver) been.

Changes in v2:
* Patch #1: use efx_mcdi_set_mtu() directly, instead of as a fallback,
  in the mtu_only case (Jakub)
* Patch #3: fix symbol collision in non-modular builds by renaming
  interrupt_mode to efx_interrupt_mode (kernel test robot)
* Patch #6: check for failure of netif_set_real_num_[tr]x_queues (Jakub)
* Patch #12: cleaner solution for ethtool drvinfo (Jakub, David)

[1]: https://lore.kernel.org/netdev/20200629.173812.1532344417590172093.davem@davemloft.net/T/
[2]: https://lore.kernel.org/netdev/20200630.130923.402514193016248355.davem@davemloft.net/T/
====================
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We have yet another new scheme for NVRAM, and a corresponding new MCDI.
Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>