Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

Pull input updates from Dmitry Torokhov:

 - a new driver to ChipOne icn8505 based touchscreens

 - on certain systems with Elan touch controllers they will be switched
   away form PS/2 emulation and over to native SMbus mode

 - assorted driver fixups and improvements

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (24 commits)
  Input: elan_i2c - add ELAN0612 (Lenovo v330 14IKB) ACPI ID
  Input: goodix - add new ACPI id for GPD Win 2 touch screen
  Input: xpad - add GPD Win 2 Controller USB IDs
  Input: ti_am335x_tsc - prevent system suspend when TSC is in use
  Input: ti_am335x_tsc - ack pending IRQs at probe and before suspend
  Input: cros_ec_keyb - mark cros_ec_keyb driver as wake enabled device.
  Input: mk712 - update documentation web link
  Input: atmel_mxt_ts - fix reset-gpio for level based irqs
  Input: atmel_mxt_ts - require device properties present when probing
  Input: psmouse-smbus - allow to control psmouse_deactivate
  Input: elantech - detect new ICs and setup Host Notify for them
  Input: elantech - add support for SMBus devices
  Input: elantech - query the resolution in query_info
  Input: elantech - split device info into a separate structure
  Input: elan_i2c - add trackstick report
  Input: usbtouchscreen - add sysfs attribute for 3M MTouch firmware rev
  Input: ati_remote2 - fix typo 'can by' to 'can be'
  Input: replace hard coded string with __func__ in pr_err()
  Input: add support for ChipOne icn8505 based touchscreens
  Input: gamecon - avoid using __set_bit() for capabilities
  ...

Documentation/devicetree/bindings/input/elan_i2c.txt

@@ -14,6 +14,7 @@ Optional properties:
 - pinctrl-0: a phandle pointing to the pin settings for the device (see
   pinctrl binding [1]).
 - vcc-supply: a phandle for the regulator supplying 3.3V power.
+- elan,trackpoint: touchpad can support a trackpoint (boolean)
 
 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt

MAINTAINERS

@@ -3431,6 +3431,12 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
 F:	drivers/input/touchscreen/chipone_icn8318.c
 
+CHIPONE ICN8505 I2C TOUCHSCREEN DRIVER
+M:	Hans de Goede <hdegoede@redhat.com>
+L:	linux-input@vger.kernel.org
+S:	Maintained
+F:	drivers/input/touchscreen/chipone_icn8505.c
+
 CHROME HARDWARE PLATFORM SUPPORT
 M:	Benson Leung <bleung@chromium.org>
 M:	Olof Johansson <olof@lixom.net>

drivers/input/input.c

@@ -1943,8 +1943,7 @@ void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int
 		break;
 
 	default:
-		pr_err("input_set_capability: unknown type %u (code %u)\n",
-		       type, code);
+		pr_err("%s: unknown type %u (code %u)\n", __func__, type, code);
 		dump_stack();
 		return;
 	}

drivers/input/joystick/as5011.c

@@ -269,9 +269,7 @@ static int as5011_probe(struct i2c_client *client,
 	input_dev->id.bustype = BUS_I2C;
 	input_dev->dev.parent = &client->dev;
 
-	__set_bit(EV_KEY, input_dev->evbit);
-	__set_bit(EV_ABS, input_dev->evbit);
-	__set_bit(BTN_JOYSTICK, input_dev->keybit);
+	input_set_capability(input_dev, EV_KEY, BTN_JOYSTICK);
 
 	input_set_abs_params(input_dev, ABS_X,
 		AS5011_MIN_AXIS, AS5011_MAX_AXIS, AS5011_FUZZ, AS5011_FLAT);

drivers/input/joystick/gamecon.c

@@ -862,7 +862,7 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 
 	case GC_N64:
 		for (i = 0; i < 10; i++)
-			__set_bit(gc_n64_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_n64_btn[i]);
 
 		for (i = 0; i < 2; i++) {
 			input_set_abs_params(input_dev, ABS_X + i, -127, 126, 0, 2);
@@ -879,26 +879,27 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 		break;
 
 	case GC_SNESMOUSE:
-		__set_bit(BTN_LEFT, input_dev->keybit);
-		__set_bit(BTN_RIGHT, input_dev->keybit);
-		__set_bit(REL_X, input_dev->relbit);
-		__set_bit(REL_Y, input_dev->relbit);
+		input_set_capability(input_dev, EV_KEY, BTN_LEFT);
+		input_set_capability(input_dev, EV_KEY, BTN_RIGHT);
+		input_set_capability(input_dev, EV_REL, REL_X);
+		input_set_capability(input_dev, EV_REL, REL_Y);
 		break;
 
 	case GC_SNES:
 		for (i = 4; i < 8; i++)
-			__set_bit(gc_snes_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
 		/* fall through */
 	case GC_NES:
 		for (i = 0; i < 4; i++)
-			__set_bit(gc_snes_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_snes_btn[i]);
 		break;
 
 	case GC_MULTI2:
-		__set_bit(BTN_THUMB, input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, BTN_THUMB);
 		/* fall through */
 	case GC_MULTI:
-		__set_bit(BTN_TRIGGER, input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, BTN_TRIGGER);
+		/* fall through */
 		break;
 
 	case GC_PSX:
@@ -906,15 +907,17 @@ static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 			input_set_abs_params(input_dev,
 					     gc_psx_abs[i], 4, 252, 0, 2);
 		for (i = 0; i < 12; i++)
-			__set_bit(gc_psx_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
+		break;
 
 		break;
 
 	case GC_DDR:
 		for (i = 0; i < 4; i++)
-			__set_bit(gc_psx_ddr_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     gc_psx_ddr_btn[i]);
 		for (i = 0; i < 12; i++)
-			__set_bit(gc_psx_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, gc_psx_btn[i]);
 
 		break;
 	}

drivers/input/joystick/xpad.c

@@ -86,8 +86,10 @@
 
 #define XPAD_PKT_LEN 64
 
-/* xbox d-pads should map to buttons, as is required for DDR pads
-   but we map them to axes when possible to simplify things */
+/*
+ * xbox d-pads should map to buttons, as is required for DDR pads
+ * but we map them to axes when possible to simplify things
+ */
 #define MAP_DPAD_TO_BUTTONS		(1 << 0)
 #define MAP_TRIGGERS_TO_BUTTONS		(1 << 1)
 #define MAP_STICKS_TO_NULL		(1 << 2)
@@ -123,6 +125,7 @@ static const struct xpad_device {
 	u8 mapping;
 	u8 xtype;
 } xpad_device[] = {
+	{ 0x0079, 0x18d4, "GPD Win 2 Controller", 0, XTYPE_XBOX360 },
 	{ 0x044f, 0x0f00, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f03, "Thrustmaster Wheel", 0, XTYPE_XBOX },
 	{ 0x044f, 0x0f07, "Thrustmaster, Inc. Controller", 0, XTYPE_XBOX },
@@ -387,15 +390,15 @@ static const signed short xpad_abs_triggers[] = {
  * match against vendor id as well. Wired Xbox 360 devices have protocol 1,
  * wireless controllers have protocol 129.
  */
-#define XPAD_XBOX360_VENDOR_PROTOCOL(vend,pr) \
+#define XPAD_XBOX360_VENDOR_PROTOCOL(vend, pr) \
 	.match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_INFO, \
 	.idVendor = (vend), \
 	.bInterfaceClass = USB_CLASS_VENDOR_SPEC, \
 	.bInterfaceSubClass = 93, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOX360_VENDOR(vend) \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,1) }, \
-	{ XPAD_XBOX360_VENDOR_PROTOCOL(vend,129) }
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 1) }, \
+	{ XPAD_XBOX360_VENDOR_PROTOCOL((vend), 129) }
 
 /* The Xbox One controller uses subclass 71 and protocol 208. */
 #define XPAD_XBOXONE_VENDOR_PROTOCOL(vend, pr) \
@@ -405,10 +408,11 @@ static const signed short xpad_abs_triggers[] = {
 	.bInterfaceSubClass = 71, \
 	.bInterfaceProtocol = (pr)
 #define XPAD_XBOXONE_VENDOR(vend) \
-	{ XPAD_XBOXONE_VENDOR_PROTOCOL(vend, 208) }
+	{ XPAD_XBOXONE_VENDOR_PROTOCOL((vend), 208) }
 
 static const struct usb_device_id xpad_table[] = {
 	{ USB_INTERFACE_INFO('X', 'B', 0) },	/* X-Box USB-IF not approved class */
+	XPAD_XBOX360_VENDOR(0x0079),		/* GPD Win 2 Controller */
 	XPAD_XBOX360_VENDOR(0x044f),		/* Thrustmaster X-Box 360 controllers */
 	XPAD_XBOX360_VENDOR(0x045e),		/* Microsoft X-Box 360 controllers */
 	XPAD_XBOXONE_VENDOR(0x045e),		/* Microsoft X-Box One controllers */
@@ -1573,7 +1577,6 @@ static void xpad_close(struct input_dev *dev)
 static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 {
 	struct usb_xpad *xpad = input_get_drvdata(input_dev);
-	set_bit(abs, input_dev->absbit);
 
 	switch (abs) {
 	case ABS_X:
@@ -1593,6 +1596,9 @@ static void xpad_set_up_abs(struct input_dev *input_dev, signed short abs)
 	case ABS_HAT0Y:	/* the d-pad (only if dpad is mapped to axes */
 		input_set_abs_params(input_dev, abs, -1, 1, 0, 0);
 		break;
+	default:
+		input_set_abs_params(input_dev, abs, 0, 0, 0, 0);
+		break;
 	}
 }
 
@@ -1633,10 +1639,7 @@ static int xpad_init_input(struct usb_xpad *xpad)
 		input_dev->close = xpad_close;
 	}
 
-	__set_bit(EV_KEY, input_dev->evbit);
-
 	if (!(xpad->mapping & MAP_STICKS_TO_NULL)) {
-		__set_bit(EV_ABS, input_dev->evbit);
 		/* set up axes */
 		for (i = 0; xpad_abs[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs[i]);
@@ -1644,21 +1647,22 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	/* set up standard buttons */
 	for (i = 0; xpad_common_btn[i] >= 0; i++)
-		__set_bit(xpad_common_btn[i], input_dev->keybit);
+		input_set_capability(input_dev, EV_KEY, xpad_common_btn[i]);
 
 	/* set up model-specific ones */
 	if (xpad->xtype == XTYPE_XBOX360 || xpad->xtype == XTYPE_XBOX360W ||
 	    xpad->xtype == XTYPE_XBOXONE) {
 		for (i = 0; xpad360_btn[i] >= 0; i++)
-			__set_bit(xpad360_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad360_btn[i]);
 	} else {
 		for (i = 0; xpad_btn[i] >= 0; i++)
-			__set_bit(xpad_btn[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY, xpad_btn[i]);
 	}
 
 	if (xpad->mapping & MAP_DPAD_TO_BUTTONS) {
 		for (i = 0; xpad_btn_pad[i] >= 0; i++)
-			__set_bit(xpad_btn_pad[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_pad[i]);
 	}
 
 	/*
@@ -1675,7 +1679,8 @@ static int xpad_init_input(struct usb_xpad *xpad)
 
 	if (xpad->mapping & MAP_TRIGGERS_TO_BUTTONS) {
 		for (i = 0; xpad_btn_triggers[i] >= 0; i++)
-			__set_bit(xpad_btn_triggers[i], input_dev->keybit);
+			input_set_capability(input_dev, EV_KEY,
+					     xpad_btn_triggers[i]);
 	} else {
 		for (i = 0; xpad_abs_triggers[i] >= 0; i++)
 			xpad_set_up_abs(input_dev, xpad_abs_triggers[i]);

drivers/input/keyboard/cros_ec_keyb.c

@@ -244,24 +244,35 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 
 	switch (ckdev->ec->event_data.event_type) {
 	case EC_MKBP_EVENT_KEY_MATRIX:
-		/*
-		 * If EC is not the wake source, discard key state changes
-		 * during suspend.
-		 */
-		if (queued_during_suspend)
-			return NOTIFY_OK;
+		if (device_may_wakeup(ckdev->dev)) {
+			pm_wakeup_event(ckdev->dev, 0);
+		} else {
+			/*
+			 * If keyboard is not wake enabled, discard key state
+			 * changes during suspend. Switches will be re-checked
+			 * in cros_ec_keyb_resume() to be sure nothing is lost.
+			 */
+			if (queued_during_suspend)
+				return NOTIFY_OK;
+		}
 
 		if (ckdev->ec->event_size != ckdev->cols) {
 			dev_err(ckdev->dev,
 				"Discarded incomplete key matrix event.\n");
 			return NOTIFY_OK;
 		}
+
 		cros_ec_keyb_process(ckdev,
 				     ckdev->ec->event_data.data.key_matrix,
 				     ckdev->ec->event_size);
 		break;
 
 	case EC_MKBP_EVENT_SYSRQ:
+		if (device_may_wakeup(ckdev->dev))
+			pm_wakeup_event(ckdev->dev, 0);
+		else if (queued_during_suspend)
+			return NOTIFY_OK;
+
 		val = get_unaligned_le32(&ckdev->ec->event_data.data.sysrq);
 		dev_dbg(ckdev->dev, "sysrq code from EC: %#x\n", val);
 		handle_sysrq(val);
@@ -269,12 +280,9 @@ static int cros_ec_keyb_work(struct notifier_block *nb,
 
 	case EC_MKBP_EVENT_BUTTON:
 	case EC_MKBP_EVENT_SWITCH:
-		/*
-		 * If EC is not the wake source, discard key state
-		 * changes during suspend. Switches will be re-checked in
-		 * cros_ec_keyb_resume() to be sure nothing is lost.
-		 */
-		if (queued_during_suspend)
+		if (device_may_wakeup(ckdev->dev))
+			pm_wakeup_event(ckdev->dev, 0);
+		else if (queued_during_suspend)
 			return NOTIFY_OK;
 
 		if (ckdev->ec->event_data.event_type == EC_MKBP_EVENT_BUTTON) {
@@ -639,6 +647,7 @@ static int cros_ec_keyb_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	device_init_wakeup(ckdev->dev, true);
 	return 0;
 }
 

drivers/input/misc/ati_remote2.c

@@ -22,7 +22,7 @@ MODULE_LICENSE("GPL");
 /*
  * ATI Remote Wonder II Channel Configuration
  *
- * The remote control can by assigned one of sixteen "channels" in order to facilitate
+ * The remote control can be assigned one of sixteen "channels" in order to facilitate
  * the use of multiple remote controls within range of each other.
  * A remote's "channel" may be altered by pressing and holding the "PC" button for
  * approximately 3 seconds, after which the button will slowly flash the count of the

drivers/input/mouse/Kconfig

@@ -133,6 +133,18 @@ config MOUSE_PS2_ELANTECH
 
 	  If unsure, say N.
 
+config MOUSE_PS2_ELANTECH_SMBUS
+	bool "Elantech PS/2 SMbus companion" if EXPERT
+	default y
+	depends on MOUSE_PS2 && MOUSE_PS2_ELANTECH
+	depends on I2C=y || I2C=MOUSE_PS2
+	select MOUSE_PS2_SMBUS
+	help
+	  Say Y here if you have a Elantech touchpad connected to
+	  to an SMBus, but enumerated through PS/2.
+
+	  If unsure, say Y.
+
 config MOUSE_PS2_SENTELIC
 	bool "Sentelic Finger Sensing Pad PS/2 protocol extension"
 	depends on MOUSE_PS2

drivers/input/mouse/alps.c

@@ -2049,14 +2049,11 @@ static int alps_hw_init_v1_v2(struct psmouse *psmouse)
 	return 0;
 }
 
-static int alps_hw_init_v6(struct psmouse *psmouse)
+/* Must be in passthrough mode when calling this function */
+static int alps_trackstick_enter_extended_mode_v3_v6(struct psmouse *psmouse)
 {
 	unsigned char param[2] = {0xC8, 0x14};
 
-	/* Enter passthrough mode to let trackpoint enter 6byte raw mode */
-	if (alps_passthrough_mode_v2(psmouse, true))
-		return -1;
-
 	if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
 	    ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
@@ -2064,9 +2061,25 @@ static int alps_hw_init_v6(struct psmouse *psmouse)
 	    ps2_command(&psmouse->ps2dev, &param[1], PSMOUSE_CMD_SETRATE))
 		return -1;
 
+	return 0;
+}
+
+static int alps_hw_init_v6(struct psmouse *psmouse)
+{
+	int ret;
+
+	/* Enter passthrough mode to let trackpoint enter 6byte raw mode */
+	if (alps_passthrough_mode_v2(psmouse, true))
+		return -1;
+
+	ret = alps_trackstick_enter_extended_mode_v3_v6(psmouse);
+
 	if (alps_passthrough_mode_v2(psmouse, false))
 		return -1;
 
+	if (ret)
+		return ret;
+
 	if (alps_absolute_mode_v6(psmouse)) {
 		psmouse_err(psmouse, "Failed to enable absolute mode\n");
 		return -1;
@@ -2140,10 +2153,18 @@ static int alps_probe_trackstick_v3_v7(struct psmouse *psmouse, int reg_base)
 
 static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 {
-	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int ret = 0;
+	int reg_val;
 	unsigned char param[4];
 
+	/*
+	 * We need to configure trackstick to report data for touchpad in
+	 * extended format. And also we need to tell touchpad to expect data
+	 * from trackstick in extended format. Without this configuration
+	 * trackstick packets sent from touchpad are in basic format which is
+	 * different from what we expect.
+	 */
+
 	if (alps_passthrough_mode_v3(psmouse, reg_base, true))
 		return -EIO;
 
@@ -2161,39 +2182,36 @@ static int alps_setup_trackstick_v3(struct psmouse *psmouse, int reg_base)
 		ret = -ENODEV;
 	} else {
 		psmouse_dbg(psmouse, "trackstick E7 report: %3ph\n", param);
-
-		/*
-		 * Not sure what this does, but it is absolutely
-		 * essential. Without it, the touchpad does not
-		 * work at all and the trackstick just emits normal
-		 * PS/2 packets.
-		 */
-		if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
-		    alps_command_mode_send_nibble(psmouse, 0x9) ||
-		    alps_command_mode_send_nibble(psmouse, 0x4)) {
-			psmouse_err(psmouse,
-				    "Error sending magic E6 sequence\n");
+		if (alps_trackstick_enter_extended_mode_v3_v6(psmouse)) {
+			psmouse_err(psmouse, "Failed to enter into trackstick extended mode\n");
 			ret = -EIO;
-			goto error;
 		}
+	}
+
+	if (alps_passthrough_mode_v3(psmouse, reg_base, false))
+		return -EIO;
+
+	if (ret)
+		return ret;
 
+	if (alps_enter_command_mode(psmouse))
+		return -EIO;
+
+	reg_val = alps_command_mode_read_reg(psmouse, reg_base + 0x08);
+	if (reg_val == -1) {
+		ret = -EIO;
+	} else {
 		/*
-		 * This ensures the trackstick packets are in the format
-		 * supported by this driver. If bit 1 isn't set the packet
-		 * format is different.
+		 * Tell touchpad that trackstick is now in extended mode.
+		 * If bit 1 isn't set the packet format is different.
 		 */
-		if (alps_enter_command_mode(psmouse) ||
-		    alps_command_mode_write_reg(psmouse,
-						reg_base + 0x08, 0x82) ||
-		    alps_exit_command_mode(psmouse))
+		reg_val |= BIT(1);
+		if (__alps_command_mode_write_reg(psmouse, reg_val))
 			ret = -EIO;
 	}
 
-error:
-	if (alps_passthrough_mode_v3(psmouse, reg_base, false))
-		ret = -EIO;
+	if (alps_exit_command_mode(psmouse))
+		return -EIO;
 
 	return ret;
 }

drivers/input/mouse/elan_i2c_core.c

@@ -36,6 +36,7 @@
 #include <linux/jiffies.h>
 #include <linux/completion.h>
 #include <linux/of.h>
+#include <linux/property.h>
 #include <linux/regulator/consumer.h>
 #include <asm/unaligned.h>
 
@@ -51,6 +52,7 @@
 #define ETP_MAX_FINGERS		5
 #define ETP_FINGER_DATA_LEN	5
 #define ETP_REPORT_ID		0x5D
+#define ETP_TP_REPORT_ID	0x5E
 #define ETP_REPORT_ID_OFFSET	2
 #define ETP_TOUCH_INFO_OFFSET	3
 #define ETP_FINGER_DATA_OFFSET	4
@@ -61,6 +63,7 @@
 struct elan_tp_data {
 	struct i2c_client	*client;
 	struct input_dev	*input;
+	struct input_dev	*tp_input; /* trackpoint input node */
 	struct regulator	*vcc;
 
 	const struct elan_transport_ops *ops;
@@ -930,6 +933,33 @@ static void elan_report_absolute(struct elan_tp_data *data, u8 *packet)
 	input_sync(input);
 }
 
+static void elan_report_trackpoint(struct elan_tp_data *data, u8 *report)
+{
+	struct input_dev *input = data->tp_input;
+	u8 *packet = &report[ETP_REPORT_ID_OFFSET + 1];
+	int x, y;
+
+	if (!data->tp_input) {
+		dev_warn_once(&data->client->dev,
+			      "received a trackpoint report while no trackpoint device has been created. Please report upstream.\n");
+		return;
+	}
+
+	input_report_key(input, BTN_LEFT, packet[0] & 0x01);
+	input_report_key(input, BTN_RIGHT, packet[0] & 0x02);
+	input_report_key(input, BTN_MIDDLE, packet[0] & 0x04);
+
+	if ((packet[3] & 0x0F) == 0x06) {
+		x = packet[4] - (int)((packet[1] ^ 0x80) << 1);
+		y = (int)((packet[2] ^ 0x80) << 1) - packet[5];
+
+		input_report_rel(input, REL_X, x);
+		input_report_rel(input, REL_Y, y);
+	}
+
+	input_sync(input);
+}
+
 static irqreturn_t elan_isr(int irq, void *dev_id)
 {
 	struct elan_tp_data *data = dev_id;
@@ -951,11 +981,17 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
 	if (error)
 		goto out;
 
-	if (report[ETP_REPORT_ID_OFFSET] != ETP_REPORT_ID)
+	switch (report[ETP_REPORT_ID_OFFSET]) {
+	case ETP_REPORT_ID:
+		elan_report_absolute(data, report);
+		break;
+	case ETP_TP_REPORT_ID:
+		elan_report_trackpoint(data, report);
+		break;
+	default:
 		dev_err(dev, "invalid report id data (%x)\n",
 			report[ETP_REPORT_ID_OFFSET]);
-	else
-		elan_report_absolute(data, report);
+	}
 
 out:
 	return IRQ_HANDLED;
@@ -966,6 +1002,36 @@ static irqreturn_t elan_isr(int irq, void *dev_id)
  * Elan initialization functions
  ******************************************************************
  */
+
+static int elan_setup_trackpoint_input_device(struct elan_tp_data *data)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input;
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "Elan TrackPoint";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = ELAN_VENDOR_ID;
+	input->id.product = data->product_id;
+	input_set_drvdata(input, data);
+
+	input_set_capability(input, EV_REL, REL_X);
+	input_set_capability(input, EV_REL, REL_Y);
+	input_set_capability(input, EV_KEY, BTN_LEFT);
+	input_set_capability(input, EV_KEY, BTN_RIGHT);
+	input_set_capability(input, EV_KEY, BTN_MIDDLE);
+
+	__set_bit(INPUT_PROP_POINTER, input->propbit);
+	__set_bit(INPUT_PROP_POINTING_STICK, input->propbit);
+
+	data->tp_input = input;
+
+	return 0;
+}
+
 static int elan_setup_input_device(struct elan_tp_data *data)
 {
 	struct device *dev = &data->client->dev;
@@ -1140,6 +1206,12 @@ static int elan_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
+	if (device_property_read_bool(&client->dev, "elan,trackpoint")) {
+		error = elan_setup_trackpoint_input_device(data);
+		if (error)
+			return error;
+	}
+
 	/*
 	 * Platform code (ACPI, DTS) should normally set up interrupt
 	 * for us, but in case it did not let's fall back to using falling
@@ -1177,6 +1249,16 @@ static int elan_probe(struct i2c_client *client,
 		return error;
 	}
 
+	if (data->tp_input) {
+		error = input_register_device(data->tp_input);
+		if (error) {
+			dev_err(&client->dev,
+				"failed to register TrackPoint input device: %d\n",
+				error);
+			return error;
+		}
+	}
+
 	/*
 	 * Systems using device tree should set up wakeup via DTS,
 	 * the rest will configure device as wakeup source by default.
@@ -1262,6 +1344,7 @@ static const struct acpi_device_id elan_acpi_id[] = {
 	{ "ELAN060B", 0 },
 	{ "ELAN060C", 0 },
 	{ "ELAN0611", 0 },
+	{ "ELAN0612", 0 },
 	{ "ELAN1000", 0 },
 	{ }
 };

drivers/input/mouse/elantech.h

@@ -106,6 +106,30 @@
  */
 #define ETP_WEIGHT_VALUE		5
 
+/*
+ * Bus information on 3rd byte of query ETP_RESOLUTION_QUERY(0x04)
+ */
+#define ETP_BUS_PS2_ONLY		0
+#define ETP_BUS_SMB_ALERT_ONLY		1
+#define ETP_BUS_SMB_HST_NTFY_ONLY	2
+#define ETP_BUS_PS2_SMB_ALERT		3
+#define ETP_BUS_PS2_SMB_HST_NTFY	4
+
+/*
+ * New ICs are either using SMBus Host Notify or just plain PS2.
+ *
+ * ETP_FW_VERSION_QUERY is:
+ * Byte 1:
+ *  - bit 0..3: IC BODY
+ * Byte 2:
+ *  - bit 4: HiddenButton
+ *  - bit 5: PS2_SMBUS_NOTIFY
+ *  - bit 6: PS2CRCCheck
+ */
+#define ETP_NEW_IC_SMBUS_HOST_NOTIFY(fw_version)	\
+		((((fw_version) & 0x0f2000) == 0x0f2000) && \
+		 ((fw_version) & 0x0000ff) > 0)
+
 /*
  * The base position for one finger, v4 hardware
  */
@@ -114,6 +138,25 @@ struct finger_pos {
 	unsigned int y;
 };
 
+struct elantech_device_info {
+	unsigned char capabilities[3];
+	unsigned char samples[3];
+	unsigned char debug;
+	unsigned char hw_version;
+	unsigned int fw_version;
+	unsigned int x_res;
+	unsigned int y_res;
+	unsigned int bus;
+	bool paritycheck;
+	bool jumpy_cursor;
+	bool reports_pressure;
+	bool crc_enabled;
+	bool set_hw_resolution;
+	bool has_trackpoint;
+	int (*send_cmd)(struct psmouse *psmouse, unsigned char c,
+			unsigned char *param);
+};
+
 struct elantech_data {
 	struct input_dev *tp_dev;	/* Relative device for trackpoint */
 	char tp_phys[32];
@@ -127,27 +170,18 @@ struct elantech_data {
 	unsigned char reg_24;
 	unsigned char reg_25;
 	unsigned char reg_26;
-	unsigned char debug;
-	unsigned char capabilities[3];
-	unsigned char samples[3];
-	bool paritycheck;
-	bool jumpy_cursor;
-	bool reports_pressure;
-	bool crc_enabled;
-	bool set_hw_resolution;
-	unsigned char hw_version;
-	unsigned int fw_version;
 	unsigned int single_finger_reports;
 	unsigned int y_max;
 	unsigned int width;
 	struct finger_pos mt[ETP_MAX_FINGERS];
 	unsigned char parity[256];
-	int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param);
+	struct elantech_device_info info;
 	void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate);
 };
 
 #ifdef CONFIG_MOUSE_PS2_ELANTECH
 int elantech_detect(struct psmouse *psmouse, bool set_properties);
+int elantech_init_ps2(struct psmouse *psmouse);
 int elantech_init(struct psmouse *psmouse);
 #else
 static inline int elantech_detect(struct psmouse *psmouse, bool set_properties)
@@ -158,6 +192,19 @@ static inline int elantech_init(struct psmouse *psmouse)
 {
 	return -ENOSYS;
 }
+static inline int elantech_init_ps2(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
 #endif /* CONFIG_MOUSE_PS2_ELANTECH */
 
+#if defined(CONFIG_MOUSE_PS2_ELANTECH_SMBUS)
+int elantech_init_smbus(struct psmouse *psmouse);
+#else
+static inline int elantech_init_smbus(struct psmouse *psmouse)
+{
+	return -ENOSYS;
+}
+#endif /* CONFIG_MOUSE_PS2_ELANTECH_SMBUS */
+
 #endif

drivers/input/mouse/psmouse-base.c

@@ -856,7 +856,17 @@ static const struct psmouse_protocol psmouse_protocols[] = {
 		.name		= "ETPS/2",
 		.alias		= "elantech",
 		.detect		= elantech_detect,
-		.init		= elantech_init,
+		.init		= elantech_init_ps2,
+	},
+#endif
+#ifdef CONFIG_MOUSE_PS2_ELANTECH_SMBUS
+	{
+		.type		= PSMOUSE_ELANTECH_SMBUS,
+		.name		= "ETSMBus",
+		.alias		= "elantech-smbus",
+		.detect		= elantech_detect,
+		.init		= elantech_init_smbus,
+		.smbus_companion = true,
 	},
 #endif
 #ifdef CONFIG_MOUSE_PS2_SENTELIC
@@ -1158,8 +1168,13 @@ static int psmouse_extensions(struct psmouse *psmouse,
 	/* Try Elantech touchpad */
 	if (max_proto > PSMOUSE_IMEX &&
 	    psmouse_try_protocol(psmouse, PSMOUSE_ELANTECH,
-				 &max_proto, set_properties, true)) {
-		return PSMOUSE_ELANTECH;
+				 &max_proto, set_properties, false)) {
+		if (!set_properties)
+			return PSMOUSE_ELANTECH;
+
+		ret = elantech_init(psmouse);
+		if (ret >= 0)
+			return ret;
 	}
 
 	if (max_proto > PSMOUSE_IMEX) {

drivers/input/mouse/psmouse-smbus.c

@@ -23,6 +23,7 @@ struct psmouse_smbus_dev {
 	struct i2c_client *client;
 	struct list_head node;
 	bool dead;
+	bool need_deactivate;
 };
 
 static LIST_HEAD(psmouse_smbus_list);
@@ -118,7 +119,10 @@ static psmouse_ret_t psmouse_smbus_process_byte(struct psmouse *psmouse)
 
 static int psmouse_smbus_reconnect(struct psmouse *psmouse)
 {
-	psmouse_deactivate(psmouse);
+	struct psmouse_smbus_dev *smbdev = psmouse->private;
+
+	if (smbdev->need_deactivate)
+		psmouse_deactivate(psmouse);
 
 	return 0;
 }
@@ -225,6 +229,7 @@ void psmouse_smbus_cleanup(struct psmouse *psmouse)
 int psmouse_smbus_init(struct psmouse *psmouse,
 		       const struct i2c_board_info *board,
 		       const void *pdata, size_t pdata_size,
+		       bool need_deactivate,
 		       bool leave_breadcrumbs)
 {
 	struct psmouse_smbus_dev *smbdev;
@@ -236,13 +241,20 @@ int psmouse_smbus_init(struct psmouse *psmouse,
 
 	smbdev->psmouse = psmouse;
 	smbdev->board = *board;
+	smbdev->need_deactivate = need_deactivate;
 
-	smbdev->board.platform_data = kmemdup(pdata, pdata_size, GFP_KERNEL);
-	if (!smbdev->board.platform_data) {
-		kfree(smbdev);
-		return -ENOMEM;
+	if (pdata) {
+		smbdev->board.platform_data = kmemdup(pdata, pdata_size,
+						      GFP_KERNEL);
+		if (!smbdev->board.platform_data) {
+			kfree(smbdev);
+			return -ENOMEM;
+		}
 	}
 
+	if (need_deactivate)
+		psmouse_deactivate(psmouse);
+
 	psmouse->private = smbdev;
 	psmouse->protocol_handler = psmouse_smbus_process_byte;
 	psmouse->reconnect = psmouse_smbus_reconnect;
@@ -250,8 +262,6 @@ int psmouse_smbus_init(struct psmouse *psmouse,
 	psmouse->disconnect = psmouse_smbus_disconnect;
 	psmouse->resync_time = 0;
 
-	psmouse_deactivate(psmouse);
-
 	mutex_lock(&psmouse_smbus_mutex);
 	list_add_tail(&smbdev->node, &psmouse_smbus_list);
 	mutex_unlock(&psmouse_smbus_mutex);

drivers/input/mouse/psmouse.h

@@ -68,6 +68,7 @@ enum psmouse_type {
 	PSMOUSE_VMMOUSE,
 	PSMOUSE_BYD,
 	PSMOUSE_SYNAPTICS_SMBUS,
+	PSMOUSE_ELANTECH_SMBUS,
 	PSMOUSE_AUTO		/* This one should always be last */
 };
 
@@ -224,6 +225,7 @@ struct i2c_board_info;
 int psmouse_smbus_init(struct psmouse *psmouse,
 		       const struct i2c_board_info *board,
 		       const void *pdata, size_t pdata_size,
+		       bool need_deactivate,
 		       bool leave_breadcrumbs);
 void psmouse_smbus_cleanup(struct psmouse *psmouse);
 

drivers/input/mouse/synaptics.c

@@ -1754,7 +1754,7 @@ static int synaptics_create_intertouch(struct psmouse *psmouse,
 	};
 
 	return psmouse_smbus_init(psmouse, &intertouch_board,
-				  &pdata, sizeof(pdata),
+				  &pdata, sizeof(pdata), true,
 				  leave_breadcrumbs);
 }
 

drivers/input/touchscreen/Kconfig

@@ -164,6 +164,17 @@ config TOUCHSCREEN_CHIPONE_ICN8318
 	  To compile this driver as a module, choose M here: the
 	  module will be called chipone_icn8318.
 
+config TOUCHSCREEN_CHIPONE_ICN8505
+	tristate "chipone icn8505 touchscreen controller"
+	depends on I2C && ACPI
+	help
+	  Say Y here if you have a ChipOne icn8505 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8505.
+
 config TOUCHSCREEN_CY8CTMG110
 	tristate "cy8ctmg110 touchscreen"
 	depends on I2C

drivers/input/touchscreen/Makefile

@@ -19,6 +19,7 @@ obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
 obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
 obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8505)	+= chipone_icn8505.o
 obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
 obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o

drivers/input/touchscreen/atmel_mxt_ts.c

@@ -194,6 +194,8 @@ enum t100_type {
 
 /* Delay times */
 #define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_GPIO_TIME	20	/* msec */
+#define MXT_RESET_INVALID_CHG	100	/* msec */
 #define MXT_RESET_TIME		200	/* msec */
 #define MXT_RESET_TIMEOUT	3000	/* msec */
 #define MXT_CRC_TIMEOUT		1000	/* msec */
@@ -1208,7 +1210,7 @@ static int mxt_soft_reset(struct mxt_data *data)
 		return ret;
 
 	/* Ignore CHG line for 100ms after reset */
-	msleep(100);
+	msleep(MXT_RESET_INVALID_CHG);
 
 	mxt_acquire_irq(data);
 
@@ -2999,142 +3001,6 @@ static int mxt_parse_device_properties(struct mxt_data *data)
 	return 0;
 }
 
-#ifdef CONFIG_ACPI
-
-struct mxt_acpi_platform_data {
-	const char *hid;
-	const struct property_entry *props;
-};
-
-static unsigned int samus_touchpad_buttons[] = {
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	BTN_LEFT
-};
-
-static const struct property_entry samus_touchpad_props[] = {
-	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", samus_touchpad_buttons),
-	{ }
-};
-
-static struct mxt_acpi_platform_data samus_platform_data[] = {
-	{
-		/* Touchpad */
-		.hid	= "ATML0000",
-		.props	= samus_touchpad_props,
-	},
-	{
-		/* Touchscreen */
-		.hid	= "ATML0001",
-	},
-	{ }
-};
-
-static unsigned int chromebook_tp_buttons[] = {
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	KEY_RESERVED,
-	BTN_LEFT
-};
-
-static const struct property_entry chromebook_tp_props[] = {
-	PROPERTY_ENTRY_U32_ARRAY("linux,gpio-keymap", chromebook_tp_buttons),
-	{ }
-};
-
-static struct mxt_acpi_platform_data chromebook_platform_data[] = {
-	{
-		/* Touchpad */
-		.hid	= "ATML0000",
-		.props	= chromebook_tp_props,
-	},
-	{
-		/* Touchscreen */
-		.hid	= "ATML0001",
-	},
-	{ }
-};
-
-static const struct dmi_system_id mxt_dmi_table[] = {
-	{
-		/* 2015 Google Pixel */
-		.ident = "Chromebook Pixel 2",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
-		},
-		.driver_data = samus_platform_data,
-	},
-	{
-		/* Samsung Chromebook Pro */
-		.ident = "Samsung Chromebook Pro",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "Google"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"),
-		},
-		.driver_data = samus_platform_data,
-	},
-	{
-		/* Other Google Chromebooks */
-		.ident = "Chromebook",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
-		},
-		.driver_data = chromebook_platform_data,
-	},
-	{ }
-};
-
-static int mxt_prepare_acpi_properties(struct i2c_client *client)
-{
-	struct acpi_device *adev;
-	const struct dmi_system_id *system_id;
-	const struct mxt_acpi_platform_data *acpi_pdata;
-
-	adev = ACPI_COMPANION(&client->dev);
-	if (!adev)
-		return -ENOENT;
-
-	system_id = dmi_first_match(mxt_dmi_table);
-	if (!system_id)
-		return -ENOENT;
-
-	acpi_pdata = system_id->driver_data;
-	if (!acpi_pdata)
-		return -ENOENT;
-
-	while (acpi_pdata->hid) {
-		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid)) {
-			/*
-			 * Remove previously installed properties if we
-			 * are probing this device not for the very first
-			 * time.
-			 */
-			device_remove_properties(&client->dev);
-
-			/*
-			 * Now install the platform-specific properties
-			 * that are missing from ACPI.
-			 */
-			device_add_properties(&client->dev, acpi_pdata->props);
-			break;
-		}
-
-		acpi_pdata++;
-	}
-
-	return 0;
-}
-#else
-static int mxt_prepare_acpi_properties(struct i2c_client *client)
-{
-	return -ENOENT;
-}
-#endif
-
 static const struct dmi_system_id chromebook_T9_suspend_dmi[] = {
 	{
 		.matches = {
@@ -3155,6 +3021,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	struct mxt_data *data;
 	int error;
 
+	/*
+	 * Ignore devices that do not have device properties attached to
+	 * them, as we need help determining whether we are dealing with
+	 * touch screen or touchpad.
+	 *
+	 * So far on x86 the only users of Atmel touch controllers are
+	 * Chromebooks, and chromeos_laptop driver will ensure that
+	 * necessary properties are provided (if firmware does not do that).
+	 */
+	if (!device_property_present(&client->dev, "compatible"))
+		return -ENXIO;
+
 	/*
 	 * Ignore ACPI devices representing bootloader mode.
 	 *
@@ -3186,10 +3064,6 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 	data->suspend_mode = dmi_check_system(chromebook_T9_suspend_dmi) ?
 		MXT_SUSPEND_T9_CTRL : MXT_SUSPEND_DEEP_SLEEP;
 
-	error = mxt_prepare_acpi_properties(client);
-	if (error && error != -ENOENT)
-		return error;
-
 	error = mxt_parse_device_properties(data);
 	if (error)
 		return error;
@@ -3210,20 +3084,14 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		return error;
 	}
 
+	disable_irq(client->irq);
+
 	if (data->reset_gpio) {
-		data->in_bootloader = true;
-		msleep(MXT_RESET_TIME);
-		reinit_completion(&data->bl_completion);
+		msleep(MXT_RESET_GPIO_TIME);
 		gpiod_set_value(data->reset_gpio, 1);
-		error = mxt_wait_for_completion(data, &data->bl_completion,
-						MXT_RESET_TIMEOUT);
-		if (error)
-			return error;
-		data->in_bootloader = false;
+		msleep(MXT_RESET_INVALID_CHG);
 	}
 
-	disable_irq(client->irq);
-
 	error = mxt_initialize(data);
 	if (error)
 		return error;

drivers/input/touchscreen/goodix.c

@@ -933,6 +933,7 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id goodix_acpi_match[] = {
 	{ "GDIX1001", 0 },
+	{ "GDIX1002", 0 },
 	{ }
 };
 MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);

drivers/input/touchscreen/mk712.c

@@ -17,7 +17,7 @@
  * found in Gateway AOL Connected Touchpad computers.
  *
  * Documentation for ICS MK712 can be found at:
- *	http://www.idt.com/products/getDoc.cfm?docID=18713923
+ *	https://www.idt.com/general-parts/mk712-touch-screen-controller
  */
 
 /*

drivers/input/touchscreen/ti_am335x_tsc.c

@@ -34,6 +34,8 @@
 #define SEQ_SETTLE		275
 #define MAX_12BIT		((1 << 12) - 1)
 
+#define TSC_IRQENB_MASK		(IRQENB_FIFO0THRES | IRQENB_EOS | IRQENB_HW_PEN)
+
 static const int config_pins[] = {
 	STEPCONFIG_XPP,
 	STEPCONFIG_XNN,
@@ -274,6 +276,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 	if (status & IRQENB_HW_PEN) {
 		ts_dev->pen_down = true;
 		irqclr |= IRQENB_HW_PEN;
+		pm_stay_awake(ts_dev->mfd_tscadc->dev);
 	}
 
 	if (status & IRQENB_PENUP) {
@@ -283,6 +286,7 @@ static irqreturn_t titsc_irq(int irq, void *dev)
 			input_report_key(input_dev, BTN_TOUCH, 0);
 			input_report_abs(input_dev, ABS_PRESSURE, 0);
 			input_sync(input_dev);
+			pm_relax(ts_dev->mfd_tscadc->dev);
 		} else {
 			ts_dev->pen_down = true;
 		}
@@ -432,6 +436,7 @@ static int titsc_probe(struct platform_device *pdev)
 		goto err_free_mem;
 	}
 
+	titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
 	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
 	err = titsc_config_wires(ts_dev);
@@ -495,6 +500,7 @@ static int __maybe_unused titsc_suspend(struct device *dev)
 
 	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
 	if (device_may_wakeup(tscadc_dev->dev)) {
+		titsc_writel(ts_dev, REG_IRQSTATUS, TSC_IRQENB_MASK);
 		idle = titsc_readl(ts_dev, REG_IRQENABLE);
 		titsc_writel(ts_dev, REG_IRQENABLE,
 				(idle | IRQENB_HW_PEN));
@@ -513,6 +519,7 @@ static int __maybe_unused titsc_resume(struct device *dev)
 		titsc_writel(ts_dev, REG_IRQWAKEUP,
 				0x00);
 		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+		pm_relax(ts_dev->mfd_tscadc->dev);
 	}
 	titsc_step_config(ts_dev);
 	titsc_writel(ts_dev, REG_FIFO0THR,

drivers/input/touchscreen/usbtouchscreen.c

@@ -440,6 +440,8 @@ static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 #define MTOUCHUSB_RESET                 7
 #define MTOUCHUSB_REQ_CTRLLR_ID         10
 
+#define MTOUCHUSB_REQ_CTRLLR_ID_LEN	16
+
 static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 {
 	if (hwcalib_xy) {
@@ -454,11 +456,93 @@ static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
 	return 1;
 }
 
+struct mtouch_priv {
+	u8 fw_rev_major;
+	u8 fw_rev_minor;
+};
+
+static ssize_t mtouch_firmware_rev_show(struct device *dev,
+				struct device_attribute *attr, char *output)
+{
+	struct usb_interface *intf = to_usb_interface(dev);
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct mtouch_priv *priv = usbtouch->priv;
+
+	return scnprintf(output, PAGE_SIZE, "%1x.%1x\n",
+			 priv->fw_rev_major, priv->fw_rev_minor);
+}
+static DEVICE_ATTR(firmware_rev, 0444, mtouch_firmware_rev_show, NULL);
+
+static struct attribute *mtouch_attrs[] = {
+	&dev_attr_firmware_rev.attr,
+	NULL
+};
+
+static const struct attribute_group mtouch_attr_group = {
+	.attrs = mtouch_attrs,
+};
+
+static int mtouch_get_fw_revision(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+	struct mtouch_priv *priv = usbtouch->priv;
+	u8 *buf;
+	int ret;
+
+	buf = kzalloc(MTOUCHUSB_REQ_CTRLLR_ID_LEN, GFP_NOIO);
+	if (!buf)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+			      MTOUCHUSB_REQ_CTRLLR_ID,
+			      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+			      0, 0, buf, MTOUCHUSB_REQ_CTRLLR_ID_LEN,
+			      USB_CTRL_SET_TIMEOUT);
+	if (ret != MTOUCHUSB_REQ_CTRLLR_ID_LEN) {
+		dev_warn(&usbtouch->interface->dev,
+			 "Failed to read FW rev: %d\n", ret);
+		ret = ret < 0 ? ret : -EIO;
+		goto free;
+	}
+
+	priv->fw_rev_major = buf[3];
+	priv->fw_rev_minor = buf[4];
+
+	ret = 0;
+
+free:
+	kfree(buf);
+	return ret;
+}
+
+static int mtouch_alloc(struct usbtouch_usb *usbtouch)
+{
+	int ret;
+
+	usbtouch->priv = kmalloc(sizeof(struct mtouch_priv), GFP_KERNEL);
+	if (!usbtouch->priv)
+		return -ENOMEM;
+
+	ret = sysfs_create_group(&usbtouch->interface->dev.kobj,
+				 &mtouch_attr_group);
+	if (ret) {
+		kfree(usbtouch->priv);
+		usbtouch->priv = NULL;
+		return ret;
+	}
+
+	return 0;
+}
+
 static int mtouch_init(struct usbtouch_usb *usbtouch)
 {
 	int ret, i;
 	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
 
+	ret = mtouch_get_fw_revision(usbtouch);
+	if (ret)
+		return ret;
+
 	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
 	                      MTOUCHUSB_RESET,
 	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
@@ -492,6 +576,14 @@ static int mtouch_init(struct usbtouch_usb *usbtouch)
 
 	return 0;
 }
+
+static void mtouch_exit(struct usbtouch_usb *usbtouch)
+{
+	struct mtouch_priv *priv = usbtouch->priv;
+
+	sysfs_remove_group(&usbtouch->interface->dev.kobj, &mtouch_attr_group);
+	kfree(priv);
+}
 #endif
 
 
@@ -1119,7 +1211,9 @@ static struct usbtouch_device_info usbtouch_dev_info[] = {
 		.max_yc		= 0x4000,
 		.rept_size	= 11,
 		.read_data	= mtouch_read_data,
+		.alloc		= mtouch_alloc,
 		.init		= mtouch_init,
+		.exit		= mtouch_exit,
 	},
 #endif
 

drivers/mfd/cros_ec.c

@@ -229,7 +229,7 @@ int cros_ec_suspend(struct cros_ec_device *ec_dev)
 }
 EXPORT_SYMBOL(cros_ec_suspend);
 
-static void cros_ec_drain_events(struct cros_ec_device *ec_dev)
+static void cros_ec_report_events_during_suspend(struct cros_ec_device *ec_dev)
 {
 	while (cros_ec_get_next_event(ec_dev, NULL) > 0)
 		blocking_notifier_call_chain(&ec_dev->event_notifier,
@@ -253,21 +253,16 @@ int cros_ec_resume(struct cros_ec_device *ec_dev)
 		dev_dbg(ec_dev->dev, "Error %d sending resume event to ec",
 			ret);
 
-	/*
-	 * In some cases, we need to distinguish between events that occur
-	 * during suspend if the EC is not a wake source. For example,
-	 * keypresses during suspend should be discarded if it does not wake
-	 * the system.
-	 *
-	 * If the EC is not a wake source, drain the event queue and mark them
-	 * as "queued during suspend".
-	 */
 	if (ec_dev->wake_enabled) {
 		disable_irq_wake(ec_dev->irq);
 		ec_dev->wake_enabled = 0;
-	} else {
-		cros_ec_drain_events(ec_dev);
 	}
+	/*
+	 * Let the mfd devices know about events that occur during
+	 * suspend. This way the clients know what to do with them.
+	 */
+	cros_ec_report_events_during_suspend(ec_dev);
+
 
 	return 0;
 }