Commit 298ff012 authored by Arnaud Ebalard's avatar Arnaud Ebalard Committed by Linus Torvalds

rtc: rtc-isl12057: add isil,irq2-can-wakeup-machine property for in-tree users

Current in-tree users of ISL12057 RTC chip (NETGEAR ReadyNAS 102, 104 and
2120) do not have the IRQ#2 pin of the chip (associated w/ the Alarm1
mechanism) connected to their SoC, but to a PMIC (TPS65251 FWIW).  This
specific hardware configuration allows the NAS to wake up when the alarms
rings.

Recently introduced alarm support for ISL12057 relies on the provision of
an "interrupts" property in system .dts file, which previous three users
will never get.  For that reason, alarm support on those devices is not
function.  To support this use case, this patch adds a new DT property for
ISL12057 (isil,irq2-can-wakeup-machine) to indicate that the chip is
capable of waking up the device using its IRQ#2 pin (even though it does
not have its IRQ#2 pin connected directly to the SoC).

This specific configuration was tested on a ReadyNAS 102 by setting an
alarm, powering off the device and see it reboot as expected when the
alarm rang w/:

  # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm
  # shutdown -h now

As a side note, the ISL12057 remains in the list of trivial devices,
because the property is not per se required by the device to work but can
help handle system w/ specific requirements.  In exchange, the new feature
is described in details in a specific documentation file.
Signed-off-by: default avatarArnaud Ebalard <arno@natisbad.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Peter Huewe <peter.huewe@infineon.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Darshana Padmadas <darshanapadmadas@gmail.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Rob Landley <rob@landley.net>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent fd71493d
Intersil ISL12057 I2C RTC/Alarm chip
ISL12057 is a trivial I2C device (it has simple device tree bindings,
consisting of a compatible field, an address and possibly an interrupt
line).
Nonetheless, it also supports an option boolean property
("isil,irq2-can-wakeup-machine") to handle the specific use-case found
on at least three in-tree users of the chip (NETGEAR ReadyNAS 102, 104
and 2120 ARM-based NAS); On those devices, the IRQ#2 pin of the chip
(associated with the alarm supported by the driver) is not connected
to the SoC but to a PMIC. It allows the device to be powered up when
RTC alarm rings. In order to mark the device has a wakeup source and
get access to the 'wakealarm' sysfs entry, this specific property can
be set when the IRQ#2 pin of the chip is not connected to the SoC but
can wake up the device.
Required properties supported by the device:
- "compatible": must be "isil,isl12057"
- "reg": I2C bus address of the device
Optional properties:
- "isil,irq2-can-wakeup-machine": mark the chip as a wakeup source,
independently of the availability of an IRQ line connected to the
SoC.
- "interrupt-parent", "interrupts": for passing the interrupt line
of the SoC connected to IRQ#2 of the RTC chip.
Example isl12057 node without IRQ#2 pin connected (no alarm support):
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
};
Example isl12057 node with IRQ#2 pin connected to main SoC via MPP6 (note
that the pinctrl-related properties below are given for completeness and
may not be required or may be different depending on your system or
SoC, and the main function of the MPP used as IRQ line, i.e.
"interrupt-parent" and "interrupts" are usually sufficient):
pinctrl {
...
rtc_alarm_pin: rtc_alarm_pin {
marvell,pins = "mpp6";
marvell,function = "gpio";
};
...
};
...
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
pinctrl-0 = <&rtc_alarm_pin>;
pinctrl-names = "default";
interrupt-parent = <&gpio0>;
interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
};
Example isl12057 node without IRQ#2 pin connected to the SoC but to a
PMIC, allowing the device to be started based on configured alarm:
isl12057: isl12057@68 {
compatible = "isil,isl12057";
reg = <0x68>;
isil,irq2-can-wakeup-machine;
};
......@@ -457,6 +457,40 @@ static int isl12057_check_rtc_status(struct device *dev, struct regmap *regmap)
return 0;
}
#ifdef CONFIG_OF
/*
* One would expect the device to be marked as a wakeup source only
* when an IRQ pin of the RTC is routed to an interrupt line of the
* CPU. In practice, such an IRQ pin can be connected to a PMIC and
* this allows the device to be powered up when RTC alarm rings. This
* is for instance the case on ReadyNAS 102, 104 and 2120. On those
* devices with no IRQ driectly connected to the SoC, the RTC chip
* can be forced as a wakeup source by stating that explicitly in
* the device's .dts file using the "isil,irq2-can-wakeup-machine"
* boolean property. This will guarantee 'wakealarm' sysfs entry is
* available on the device.
*
* The function below returns 1, i.e. the capability of the chip to
* wakeup the device, based on IRQ availability or if the boolean
* property has been set in the .dts file. Otherwise, it returns 0.
*/
static bool isl12057_can_wakeup_machine(struct device *dev)
{
struct isl12057_rtc_data *data = dev_get_drvdata(dev);
return (data->irq || of_property_read_bool(dev->of_node,
"isil,irq2-can-wakeup-machine"));
}
#else
static bool isl12057_can_wakeup_machine(struct device *dev)
{
struct isl12057_rtc_data *data = dev_get_drvdata(dev);
return !!data->irq;
}
#endif
static int isl12057_rtc_alarm_irq_enable(struct device *dev,
unsigned int enable)
{
......@@ -555,7 +589,8 @@ static int isl12057_probe(struct i2c_client *client,
client->irq, ret);
}
device_init_wakeup(dev, !!data->irq);
if (isl12057_can_wakeup_machine(dev))
device_init_wakeup(dev, true);
data->rtc = devm_rtc_device_register(dev, DRV_NAME, &rtc_ops,
THIS_MODULE);
......@@ -576,9 +611,7 @@ static int isl12057_probe(struct i2c_client *client,
static int isl12057_remove(struct i2c_client *client)
{
struct isl12057_rtc_data *rtc_data = dev_get_drvdata(&client->dev);
if (rtc_data->irq)
if (isl12057_can_wakeup_machine(&client->dev))
device_init_wakeup(&client->dev, false);
return 0;
......@@ -589,7 +622,7 @@ static int isl12057_rtc_suspend(struct device *dev)
{
struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
if (rtc_data->irq && device_may_wakeup(dev))
return enable_irq_wake(rtc_data->irq);
return 0;
......@@ -599,7 +632,7 @@ static int isl12057_rtc_resume(struct device *dev)
{
struct isl12057_rtc_data *rtc_data = dev_get_drvdata(dev);
if (device_may_wakeup(dev))
if (rtc_data->irq && device_may_wakeup(dev))
return disable_irq_wake(rtc_data->irq);
return 0;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment