i2c: brcmstb: Fix START and STOP conditions

The BSC data buffers to send and receive data are each of size 32 bytes
or 8 bytes 'xfersz' depending on SoC. The problem observed for all the
combined message transfer was if length of data transfer was a multiple
of 'xfersz' a repeated START was being transmitted by BSC driver. Fixed
this by appropriately setting START/STOP conditions for such transfers.

Fixes: dd1aa252 ("i2c: brcmstb: Add Broadcom settop SoC i2c controller driver")
Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
Acked-by: Kamal Dasu <kdasu.kdev@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-brcmstb.c

@@ -465,6 +465,7 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
 	u8 *tmp_buf;
 	int len = 0;
 	int xfersz = brcmstb_i2c_get_xfersz(dev);
+	u32 cond, cond_per_msg;
 
 	if (dev->is_suspended)
 		return -EBUSY;
@@ -481,10 +482,11 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
 			pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);
 
 		if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
-			brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP));
+			cond = ~COND_START_STOP;
 		else
-			brcmstb_set_i2c_start_stop(dev,
-						   COND_RESTART | COND_NOSTOP);
+			cond = COND_RESTART | COND_NOSTOP;
+
+		brcmstb_set_i2c_start_stop(dev, cond);
 
 		/* Send slave address */
 		if (!(pmsg->flags & I2C_M_NOSTART)) {
@@ -497,13 +499,24 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
 			}
 		}
 
+		cond_per_msg = cond;
+
 		/* Perform data transfer */
 		while (len) {
 			bytes_to_xfer = min(len, xfersz);
 
-			if (len <= xfersz && i == (num - 1))
-				brcmstb_set_i2c_start_stop(dev,
-							   ~(COND_START_STOP));
+			if (len <= xfersz) {
+				if (i == (num - 1))
+					cond_per_msg = cond_per_msg &
+						~(COND_RESTART | COND_NOSTOP);
+				else
+					cond_per_msg = cond;
+			} else {
+				cond_per_msg = (cond_per_msg & ~COND_RESTART) |
+					COND_NOSTOP;
+			}
+
+			brcmstb_set_i2c_start_stop(dev, cond_per_msg);
 
 			rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
 						       bytes_to_xfer, pmsg);
@@ -512,6 +525,8 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
 
 			len -=  bytes_to_xfer;
 			tmp_buf += bytes_to_xfer;
+
+			cond_per_msg = COND_NOSTART | COND_NOSTOP;
 		}
 	}