OK, no LoC saved in this case because sub was defined in terms of add.
Still do it because this also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Helge Deller <deller@gmx.de>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-parisc@vger.kernel.org
Link: http://lkml.kernel.org/r/20140508135852.659342353@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-am33-list@redhat.com
Link: http://lkml.kernel.org/r/20140508135852.605324173@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Maciej W. Rozycki <macro@codesourcery.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-mips@linux-mips.org
Link: http://lkml.kernel.org/r/20140508135852.521548500@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: James Hogan <james.hogan@imgtec.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-metag@vger.kernel.org
Link: http://lkml.kernel.org/r/20140508135852.453864110@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Requires asm_op due to eor.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-m68k@lists.linux-m68k.org
Link: http://lkml.kernel.org/r/20140509091646.GO30445@twins.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-m32r-ja@ml.linux-m32r.org
Cc: linux-m32r@ml.linux-m32r.org
Link: http://lkml.kernel.org/r/20140508135852.318635136@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: linux-ia64@vger.kernel.org
Link: http://lkml.kernel.org/r/20140508135852.245224472@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

OK, no LoC saved in this case because the !return variants were
defined in terms of the return ops. Still do it because this also
prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Richard Kuo <rkuo@codeaurora.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: linux-hexagon@vger.kernel.org
Link: http://lkml.kernel.org/r/20140508135852.171567636@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: linux-cris-kernel@axis.com
Link: http://lkml.kernel.org/r/20140508135852.104572724@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Requires the asm_op because of eor.

AVR32 is a bit special in that its ADD/SUB instructions are not
symmetric. Its SUB instruction allows for an 21bit immediate.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Haavard Skinnemoen <hskinnemoen@gmail.com>
Cc: Hans-Christian Egtvedt <egtvedt@samfundet.no>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140531141445.GD16155@laptop.programming.kicks-ass.netSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Requires the asm_op due to eor.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20140508135851.995123148@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Requires the asm_op because of eor.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Chen Gang <gang.chen@asianux.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nicolas Pitre <nico@linaro.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Albin Tonnerre <albin.tonnerre@arm.com>
Cc: Victor Kamensky <victor.kamensky@linaro.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20140508135851.939725247@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Link: http://lkml.kernel.org/r/20140508135851.886055622@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Many of the atomic op implementations are the same except for one
instruction; fold the lot into a few CPP macros and reduce LoC.

This also prepares for easy addition of new ops.

Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: linux-alpha@vger.kernel.org
Link: http://lkml.kernel.org/r/20140508135851.832107183@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

There are no users, kill it.
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20140508135851.768177189@infradead.orgSigned-off-by: Ingo Molnar <mingo@kernel.org>

Pull x86 vdso updates from Ingo Molnar:
 "Further simplifications and improvements to the VDSO code, by Andy
  Lutomirski"

* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86_64/vsyscall: Fix warn_bad_vsyscall log output
  x86/vdso: Set VM_MAYREAD for the vvar vma
  x86, vdso: Get rid of the fake section mechanism
  x86, vdso: Move the vvar area before the vdso text

Pull x86 UV TLB update from Ingo Molnar:
 "UV TLB shootdown logic updates for version of the UV architecture"

* 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/uv: Update the UV3 TLB shootdown logic

Pull RAS updates from Ingo Molnar:
 "The main changes in this cycle are:

   - RAS tracing/events infrastructure, by Gong Chen.

   - Various generalizations of the APEI code to make it available to
     non-x86 architectures, by Tomasz Nowicki"

* 'x86-ras-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ras: Fix build warnings in <linux/aer.h>
  acpi, apei, ghes: Factor out ioremap virtual memory for IRQ and NMI context.
  acpi, apei, ghes: Make NMI error notification to be GHES architecture extension.
  apei, mce: Factor out APEI architecture specific MCE calls.
  RAS, extlog: Adjust init flow
  trace, eMCA: Add a knob to adjust where to save event log
  trace, RAS: Add eMCA trace event interface
  RAS, debugfs: Add debugfs interface for RAS subsystem
  CPER: Adjust code flow of some functions
  x86, MCE: Robustify mcheck_init_device
  trace, AER: Move trace into unified interface
  trace, RAS: Add basic RAS trace event
  x86, MCE: Kill CPU_POST_DEAD

Pull x86 platform updates from Ingo Molnar:
 "The main changes in this cycle are:

   - Intel SOC driver updates, by Aubrey Li.

   - TS5500 platform updates, by Vivien Didelot"

* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/pmc_atom: Silence shift wrapping warnings in pmc_sleep_tmr_show()
  x86/pmc_atom: Expose PMC device state and platform sleep state
  x86/pmc_atom: Eisable a few S0ix wake up events for S0ix residency
  x86/platform: New Intel Atom SOC power management controller driver
  x86/platform/ts5500: Add support for TS-5400 boards
  x86/platform/ts5500: Add a 'name' sysfs attribute
  x86/platform/ts5500: Use the DEVICE_ATTR_RO() macro

Pull x86 mm changes from Ingo Molnar:
 "The main change in this cycle is the rework of the TLB range flushing
  code, to simplify, fix and consolidate the code.  By Dave Hansen"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm: Set TLB flush tunable to sane value (33)
  x86/mm: New tunable for single vs full TLB flush
  x86/mm: Add tracepoints for TLB flushes
  x86/mm: Unify remote INVLPG code
  x86/mm: Fix missed global TLB flush stat
  x86/mm: Rip out complicated, out-of-date, buggy TLB flushing
  x86/mm: Clean up the TLB flushing code
  x86/smep: Be more informative when signalling an SMEP fault

Pull EFI changes from Ingo Molnar:
 "Main changes in this cycle are:

   - arm64 efi stub fixes, preservation of FP/SIMD registers across
     firmware calls, and conversion of the EFI stub code into a static
     library - Ard Biesheuvel

   - Xen EFI support - Daniel Kiper

   - Support for autoloading the efivars driver - Lee, Chun-Yi

   - Use the PE/COFF headers in the x86 EFI boot stub to request that
     the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
     Brown

   - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri

   - Additional error logging in x86 EFI boot stub - Ulf Winkelvos

   - Support loading initrd above 4G in EFI boot stub - Yinghai Lu

   - EFI reboot patches for ACPI hardware reduced platforms"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  efi/arm64: Handle missing virtual mapping for UEFI System Table
  arch/x86/xen: Silence compiler warnings
  xen: Silence compiler warnings
  x86/efi: Request desired alignment via the PE/COFF headers
  x86/efi: Add better error logging to EFI boot stub
  efi: Autoload efivars
  efi: Update stale locking comment for struct efivars
  arch/x86: Remove efi_set_rtc_mmss()
  arch/x86: Replace plain strings with constants
  xen: Put EFI machinery in place
  xen: Define EFI related stuff
  arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
  arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
  efi: Introduce EFI_PARAVIRT flag
  arch/x86: Do not access EFI memory map if it is not available
  efi: Use early_mem*() instead of early_io*()
  arch/ia64: Define early_memunmap()
  x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
  efi/reboot: Allow powering off machines using EFI
  efi/reboot: Add generic wrapper around EfiResetSystem()
  ...

Pull x86 cpufeature updates from Ingo Molnar:
 "The main changes in this cycle were:

   - Continued cleanups of CPU bugs mis-marked as 'missing features', by
     Borislav Petkov.

   - Detect the xsaves/xrstors feature and releated cleanup, by Fenghua
     Yu"

* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, cpu: Kill cpu_has_mp
  x86, amd: Cleanup init_amd
  x86/cpufeature: Add bug flags to /proc/cpuinfo
  x86, cpufeature: Convert more "features" to bugs
  x86/xsaves: Detect xsaves/xrstors feature
  x86/cpufeature.h: Reformat x86 feature macros

Merge branches 'x86-build-for-linus', 'x86-cleanups-for-linus' and 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 build/cleanup/debug updates from Ingo Molnar:
 "Robustify the build process with a quirk to avoid GCC reordering
  related bugs.

  Two code cleanups.

  Simplify entry_64.S CFI annotations, by Jan Beulich"

* 'x86-build-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, build: Change code16gcc.h from a C header to an assembly header

* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86: Simplify __HAVE_ARCH_CMPXCHG tests
  x86/tsc: Get rid of custom DIV_ROUND() macro

* 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/debug: Drop several unnecessary CFI annotations

Pull scheduler updates from Ingo Molnar:

 - Move the nohz kick code out of the scheduler tick to a dedicated IPI,
   from Frederic Weisbecker.

  This necessiated quite some background infrastructure rework,
  including:

   * Clean up some irq-work internals
   * Implement remote irq-work
   * Implement nohz kick on top of remote irq-work
   * Move full dynticks timer enqueue notification to new kick
   * Move multi-task notification to new kick
   * Remove unecessary barriers on multi-task notification

 - Remove proliferation of wait_on_bit() action functions and allow
   wait_on_bit_action() functions to support a timeout.  (Neil Brown)

 - Another round of sched/numa improvements, cleanups and fixes.  (Rik
   van Riel)

 - Implement fast idling of CPUs when the system is partially loaded,
   for better scalability.  (Tim Chen)

 - Restructure and fix the CPU hotplug handling code that may leave
   cfs_rq and rt_rq's throttled when tasks are migrated away from a dead
   cpu.  (Kirill Tkhai)

 - Robustify the sched topology setup code.  (Peterz Zijlstra)

 - Improve sched_feat() handling wrt.  static_keys (Jason Baron)

 - Misc fixes.

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  sched/fair: Fix 'make xmldocs' warning caused by missing description
  sched: Use macro for magic number of -1 for setparam
  sched: Robustify topology setup
  sched: Fix sched_setparam() policy == -1 logic
  sched: Allow wait_on_bit_action() functions to support a timeout
  sched: Remove proliferation of wait_on_bit() action functions
  sched/numa: Revert "Use effective_load() to balance NUMA loads"
  sched: Fix static_key race with sched_feat()
  sched: Remove extra static_key*() function indirection
  sched/rt: Fix replenish_dl_entity() comments to match the current upstream code
  sched: Transform resched_task() into resched_curr()
  sched/deadline: Kill task_struct->pi_top_task
  sched: Rework check_for_tasks()
  sched/rt: Enqueue just unthrottled rt_rq back on the stack in __disable_runtime()
  sched/fair: Disable runtime_enabled on dying rq
  sched/numa: Change scan period code to match intent
  sched/numa: Rework best node setting in task_numa_migrate()
  sched/numa: Examine a task move when examining a task swap
  sched/numa: Simplify task_numa_compare()
  sched/numa: Use effective_load() to balance NUMA loads
  ...

Pull perf changes from Ingo Molnar:
 "Kernel side changes:

   - Consolidate the PMU interrupt-disabled code amongst architectures
     (Vince Weaver)

   - misc fixes

  Tooling changes (new features, user visible changes):

   - Add support for pagefault tracing in 'trace', please see multiple
     examples in the changeset messages (Stanislav Fomichev).

   - Add pagefault statistics in 'trace' (Stanislav Fomichev)

   - Add header for columns in 'top' and 'report' TUI browsers (Jiri
     Olsa)

   - Add pagefault statistics in 'trace' (Stanislav Fomichev)

   - Add IO mode into timechart command (Stanislav Fomichev)

   - Fallback to syscalls:* when raw_syscalls:* is not available in the
     perl and python perf scripts.  (Daniel Bristot de Oliveira)

   - Add --repeat global option to 'perf bench' to be used in benchmarks
     such as the existing 'futex' one, that was modified to use it
     instead of a local option.  (Davidlohr Bueso)

   - Fix fd -> pathname resolution in 'trace', be it using /proc or a
     vfs_getname probe point.  (Arnaldo Carvalho de Melo)

   - Add suggestion of how to set perf_event_paranoid sysctl, to help
     non-root users trying tools like 'trace' to get a working
     environment.  (Arnaldo Carvalho de Melo)

   - Updates from trace-cmd for traceevent plugin_kvm plus args cleanup
     (Steven Rostedt, Jan Kiszka)

   - Support S/390 in 'perf kvm stat' (Alexander Yarygin)

  Tooling infrastructure changes:

   - Allow reserving a row for header purposes in the hists browser
     (Arnaldo Carvalho de Melo)

   - Various fixes and prep work related to supporting Intel PT (Adrian
     Hunter)

   - Introduce multiple debug variables control (Jiri Olsa)

   - Add callchain and additional sample information for python scripts
     (Joseph Schuchart)

   - More prep work to support Intel PT: (Adrian Hunter)
     - Polishing 'script' BTS output
     - 'inject' can specify --kallsym
     - VDSO is per machine, not a global var
     - Expose data addr lookup functions previously private to 'script'
     - Large mmap fixes in events processing

   - Include standard stringify macros in power pc code (Sukadev
     Bhattiprolu)

  Tooling cleanups:

   - Convert open coded equivalents to asprintf() (Andy Shevchenko)

   - Remove needless reassignments in 'trace' (Arnaldo Carvalho de Melo)

   - Cache the is_exit syscall test in 'trace) (Arnaldo Carvalho de
     Melo)

   - No need to reimplement err() in 'perf bench sched-messaging', drop
     barf().  (Davidlohr Bueso).

   - Remove ev_name argument from perf_evsel__hists_browse, can be
     obtained from the other parameters.  (Jiri Olsa)

  Tooling fixes:

   - Fix memory leak in the 'sched-messaging' perf bench test.
     (Davidlohr Bueso)

   - The -o and -n 'perf bench mem' options are mutually exclusive, emit
     error when both are specified.  (Davidlohr Bueso)

   - Fix scrollbar refresh row index in the ui browser, problem exposed
     now that headers will be added and will be allowed to be switched
     on/off.  (Jiri Olsa)

   - Handle the num array type in python properly (Sebastian Andrzej
     Siewior)

   - Fix wrong condition for allocation failure (Jiri Olsa)

   - Adjust callchain based on DWARF debug info on powerpc (Sukadev
     Bhattiprolu)

   - Fix a risk for doing free on uninitialized pointer in traceevent
     lib (Rickard Strandqvist)

   - Update attr test with PERF_FLAG_FD_CLOEXEC flag (Jiri Olsa)

   - Enable close-on-exec flag on perf file descriptor (Yann Droneaud)

   - Fix build on gcc 4.4.7 (Arnaldo Carvalho de Melo)

   - Event ordering fixes (Jiri Olsa)"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (123 commits)
  Revert "perf tools: Fix jump label always changing during tracing"
  perf tools: Fix perf usage string leftover
  perf: Check permission only for parent tracepoint event
  perf record: Store PERF_RECORD_FINISHED_ROUND only for nonempty rounds
  perf record: Always force PERF_RECORD_FINISHED_ROUND event
  perf inject: Add --kallsyms parameter
  perf tools: Expose 'addr' functions so they can be reused
  perf session: Fix accounting of ordered samples queue
  perf powerpc: Include util/util.h and remove stringify macros
  perf tools: Fix build on gcc 4.4.7
  perf tools: Add thread parameter to vdso__dso_findnew()
  perf tools: Add dso__type()
  perf tools: Separate the VDSO map name from the VDSO dso name
  perf tools: Add vdso__new()
  perf machine: Fix the lifetime of the VDSO temporary file
  perf tools: Group VDSO global variables into a structure
  perf session: Add ability to skip 4GiB or more
  perf session: Add ability to 'skip' a non-piped event stream
  perf tools: Pass machine to vdso__dso_findnew()
  perf tools: Add dso__data_size()
  ...

Pull locking updates from Ingo Molnar:
 "The main changes in this cycle are:

   - big rtmutex and futex cleanup and robustification from Thomas
     Gleixner
   - mutex optimizations and refinements from Jason Low
   - arch_mutex_cpu_relax() removal and related cleanups
   - smaller lockdep tweaks"

* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
  arch, locking: Ciao arch_mutex_cpu_relax()
  locking/lockdep: Only ask for /proc/lock_stat output when available
  locking/mutexes: Optimize mutex trylock slowpath
  locking/mutexes: Try to acquire mutex only if it is unlocked
  locking/mutexes: Delete the MUTEX_SHOW_NO_WAITER macro
  locking/mutexes: Correct documentation on mutex optimistic spinning
  rtmutex: Make the rtmutex tester depend on BROKEN
  futex: Simplify futex_lock_pi_atomic() and make it more robust
  futex: Split out the first waiter attachment from lookup_pi_state()
  futex: Split out the waiter check from lookup_pi_state()
  futex: Use futex_top_waiter() in lookup_pi_state()
  futex: Make unlock_pi more robust
  rtmutex: Avoid pointless requeueing in the deadlock detection chain walk
  rtmutex: Cleanup deadlock detector debug logic
  rtmutex: Confine deadlock logic to futex
  rtmutex: Simplify remove_waiter()
  rtmutex: Document pi chain walk
  rtmutex: Clarify the boost/deboost part
  rtmutex: No need to keep task ref for lock owner check
  rtmutex: Simplify and document try_to_take_rtmutex()
  ...

Pull RCU changes from Ingo Molar:
 "The main changes:

   - torture-test updates
   - callback-offloading changes
   - maintainership changes
   - update RCU documentation
   - miscellaneous fixes"

* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
  rcu: Allow for NULL tick_nohz_full_mask when nohz_full= missing
  rcu: Fix a sparse warning in rcu_report_unblock_qs_rnp()
  rcu: Fix a sparse warning in rcu_initiate_boost()
  rcu: Fix __rcu_reclaim() to use true/false for bool
  rcu: Remove CONFIG_PROVE_RCU_DELAY
  rcu: Use __this_cpu_read() instead of per_cpu_ptr()
  rcu: Don't use NMIs to dump other CPUs' stacks
  rcu: Bind grace-period kthreads to non-NO_HZ_FULL CPUs
  rcu: Simplify priority boosting by putting rt_mutex in rcu_node
  rcu: Check both root and current rcu_node when setting up future grace period
  rcu: Allow post-unlock reference for rt_mutex
  rcu: Loosen __call_rcu()'s rcu_head alignment constraint
  rcu: Eliminate read-modify-write ACCESS_ONCE() calls
  rcu: Remove redundant ACCESS_ONCE() from tick_do_timer_cpu
  rcu: Make rcu node arrays static const char * const
  signal: Explain local_irq_save() call
  rcu: Handle obsolete references to TINY_PREEMPT_RCU
  rcu: Document deadlock-avoidance information for rcu_read_unlock()
  scripts: Teach get_maintainer.pl about the new "R:" tag
  rcu: Update rcu torture maintainership filename patterns
  ...

Pull m68k changes from Geert Uytterhoeven:
 "Extremely non-spectacular changes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k/sun3: Remove define statement no longer needed
  zorro: Use ARRAY_SIZE

Pull ia64 cleanups from Tony Luck:
 "Miscellaneous ia64 specific cleanup"

* tag 'please-pull-misc-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux:
  [IA64] sn: Do not needlessly convert between pointers and integers
  [IA64] sn: Fix zeroing of PDAs

Pull arm64 updates from Will Deacon:
 "Once again, Catalin's off on holiday and I'm looking after the arm64
  tree.  Please can you pull the following arm64 updates for 3.17?

  Note that this branch also includes the new GICv3 driver (merged via a
  stable tag from Jason's irqchip tree), since there is a fix for older
  binutils on top.

  Changes include:
   - context tracking support (NO_HZ_FULL) which narrowly missed 3.16
   - vDSO layout rework following Andy's work on x86
   - TEXT_OFFSET fuzzing for bootloader testing
   - /proc/cpuinfo tidy-up
   - preliminary work to support 48-bit virtual addresses, but this is
     currently disabled until KVM has been ported to use it (the patches
     do, however, bring some nice clean-up)
   - boot-time CPU sanity checks (especially useful on heterogenous
     systems)
   - support for syscall auditing
   - support for CC_STACKPROTECTOR
   - defconfig updates"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (55 commits)
  arm64: add newline to I-cache policy string
  Revert "arm64: dmi: Add SMBIOS/DMI support"
  arm64: fpsimd: fix a typo in fpsimd_save_partial_state ENDPROC
  arm64: don't call break hooks for BRK exceptions from EL0
  arm64: defconfig: enable devtmpfs mount option
  arm64: vdso: fix build error when switching from LE to BE
  arm64: defconfig: add virtio support for running as a kvm guest
  arm64: gicv3: Allow GICv3 compilation with older binutils
  arm64: fix soft lockup due to large tlb flush range
  arm64/crypto: fix makefile rule for aes-glue-%.o
  arm64: Do not invoke audit_syscall_* functions if !CONFIG_AUDIT_SYSCALL
  arm64: Fix barriers used for page table modifications
  arm64: Add support for 48-bit VA space with 64KB page configuration
  arm64: asm/pgtable.h pmd/pud definitions clean-up
  arm64: Determine the vmalloc/vmemmap space at build time based on VA_BITS
  arm64: Clean up the initial page table creation in head.S
  arm64: Remove asm/pgtable-*level-types.h files
  arm64: Remove asm/pgtable-*level-hwdef.h files
  arm64: Convert bool ARM64_x_LEVELS to int ARM64_PGTABLE_LEVELS
  arm64: mm: Implement 4 levels of translation tables
  ...

Pull KVM changes from Paolo Bonzini:
 "These are the x86, MIPS and s390 changes; PPC and ARM will come in a
  few days.

  MIPS and s390 have little going on this release; just bugfixes, some
  small, some larger.

  The highlights for x86 are nested VMX improvements (Jan Kiszka),
  optimizations for old processor (up to Nehalem, by me and Bandan Das),
  and a lot of x86 emulator bugfixes (Nadav Amit).

  Stephen Rothwell reported a trivial conflict with the tracing branch"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (104 commits)
  x86/kvm: Resolve shadow warnings in macro expansion
  KVM: s390: rework broken SIGP STOP interrupt handling
  KVM: x86: always exit on EOIs for interrupts listed in the IOAPIC redir table
  KVM: vmx: remove duplicate vmx_mpx_supported() prototype
  KVM: s390: Fix memory leak on busy SIGP stop
  x86/kvm: Resolve shadow warning from min macro
  kvm: Resolve missing-field-initializers warnings
  Replace NR_VMX_MSR with its definition
  KVM: x86: Assertions to check no overrun in MSR lists
  KVM: x86: set rflags.rf during fault injection
  KVM: x86: Setting rflags.rf during rep-string emulation
  KVM: x86: DR6/7.RTM cannot be written
  KVM: nVMX: clean up nested_release_vmcs12 and code around it
  KVM: nVMX: fix lifetime issues for vmcs02
  KVM: x86: Defining missing x86 vectors
  KVM: x86: emulator injects #DB when RFLAGS.RF is set
  KVM: x86: Cleanup of rflags.rf cleaning
  KVM: x86: Clear rflags.rf on emulated instructions
  KVM: x86: popf emulation should not change RF
  KVM: x86: Clearing rflags.rf upon skipped emulated instruction
  ...

Pull tracing filter cleanups from Steven Rostedt:
 "Oleg Nesterov did several clean ups with the tracing filter code.  As
  he found some small bugs that went into 3.16, and these changes were
  based on that, I had to apply his changes to a separate branch than my
  main development branch.

  This was based on work that was already pulled into 3.16, and is a
  separate pull request to keep from having local merges in my pull
  request"

* tag 'trace-3.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Kill "filter_string" arg of replace_preds()
  tracing: Change apply_subsystem_event_filter() paths to check file->system == dir
  tracing: Kill ftrace_event_call->files
  tracing/uprobes: Kill the dead TRACE_EVENT_FL_USE_CALL_FILTER logic
  tracing: Kill call_filter_disable()
  tracing: Kill destroy_call_preds()
  tracing: Kill destroy_preds() and destroy_file_preds()

Pull tracing updates from Steven Rostedt:
 "This pull request has a lot of work done.  The main thing is the
  changes to the ftrace function callback infrastructure.  It's
  introducing a way to allow different functions to call directly
  different trampolines instead of all calling the same "mcount" one.

  The only user of this for now is the function graph tracer, which
  always had a different trampoline, but the function tracer trampoline
  was called and did basically nothing, and then the function graph
  tracer trampoline was called.  The difference now, is that the
  function graph tracer trampoline can be called directly if a function
  is only being traced by the function graph trampoline.  If function
  tracing is also happening on the same function, the old way is still
  done.

  The accounting for this takes up more memory when function graph
  tracing is activated, as it needs to keep track of which functions it
  uses.  I have a new way that wont take as much memory, but it's not
  ready yet for this merge window, and will have to wait for the next
  one.

  Another big change was the removal of the ftrace_start/stop() calls
  that were used by the suspend/resume code that stopped function
  tracing when entering into suspend and resume paths.  The stop of
  ftrace was done because there was some function that would crash the
  system if one called smp_processor_id()! The stop/start was a big
  hammer to solve the issue at the time, which was when ftrace was first
  introduced into Linux.  Now ftrace has better infrastructure to debug
  such issues, and I found the problem function and labeled it with
  "notrace" and function tracing can now safely be activated all the way
  down into the guts of suspend and resume

  Other changes include clean ups of uprobe code, clean up of the
  trace_seq() code, and other various small fixes and clean ups to
  ftrace and tracing"

* tag 'trace-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (57 commits)
  ftrace: Add warning if tramp hash does not match nr_trampolines
  ftrace: Fix trampoline hash update check on rec->flags
  ring-buffer: Use rb_page_size() instead of open coded head_page size
  ftrace: Rename ftrace_ops field from trampolines to nr_trampolines
  tracing: Convert local function_graph functions to static
  ftrace: Do not copy old hash when resetting
  tracing: let user specify tracing_thresh after selecting function_graph
  ring-buffer: Always run per-cpu ring buffer resize with schedule_work_on()
  tracing: Remove function_trace_stop and HAVE_FUNCTION_TRACE_MCOUNT_TEST
  s390/ftrace: remove check of obsolete variable function_trace_stop
  arm64, ftrace: Remove check of obsolete variable function_trace_stop
  Blackfin: ftrace: Remove check of obsolete variable function_trace_stop
  metag: ftrace: Remove check of obsolete variable function_trace_stop
  microblaze: ftrace: Remove check of obsolete variable function_trace_stop
  MIPS: ftrace: Remove check of obsolete variable function_trace_stop
  parisc: ftrace: Remove check of obsolete variable function_trace_stop
  sh: ftrace: Remove check of obsolete variable function_trace_stop
  sparc64,ftrace: Remove check of obsolete variable function_trace_stop
  tile: ftrace: Remove check of obsolete variable function_trace_stop
  ftrace: x86: Remove check of obsolete variable function_trace_stop
  ...

Pull config-bisect changes from Steven Rostedt:
 "The big change here is the rewrite of config-bisect.  The old way
  never worked properly as it assumed the bad config was a subset of the
  good config, and just found the config that would break the build.

  The new way does a diff of the bad config verses the good config and
  makes the similar until it finds that one config works and the other
  does not and reports the config that makes that difference.  The two
  configs do not need to be related.  It is much more useful now:

* tag 'ktest-v3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-ktest:
  ktest: Update documentation on config_bisect
  ktest: Add the config bisect manual back
  ktest: Remove unused functions
  ktest: Put back in the CONFIG_BISECT_CHECK
  ktest: Rewrite the config-bisect to actually work
  ktest: Some cleanup for improving readability
  ktest: add 2nd parameter of run_command() to set the redirect target file

Pull clock framework updates from Mike Turquette:
 "The clock framework changes for 3.17 are mostly additions of new clock
  drivers and fixes/enhancements to existing clock drivers.  There are
  also some non-critical fixes and improvements to the framework core.

  Changes to the clock framework core include:
   - improvements to printks on errors
   - flattening the previously hierarchal structure of per-clock entries
     in debugfs
   - allow per-clock debugfs entries that are specific to a particular
     clock driver
   - configure initial clock parent and/or initial clock rate from
     Device Tree
   - several feature enhancements to the composite clock type
   - misc fixes

  New clock drivers added include:
   - TI Palmas PMIC
   - Allwinner A23 SoC
   - Qualcomm APQ8084 and IPQ8064 SoCs
   - Rockchip rk3188, rk3066 and rk3288 SoCs
   - STMicroelectronics STiH407 SoC
   - Cirrus Logic CLPS711X SoC

  Many fixes, feature enhancements and further clock tree support for
  existing clock drivers also were merged, such as Samsung's "ARMCLK
  down" power saving feature for their Exynos4 & Exynos5 SoCs"

* tag 'clk-for-linus-3.17' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
  clk: Add missing of_clk_set_defaults export
  clk: checking wrong variable in __set_clk_parents()
  clk: Propagate any error return from debug_init()
  clk: clps711x: Add DT bindings documentation
  clk: Add CLPS711X clk driver
  clk: st: Use round to closest divider flag
  clk: st: Update frequency tables for fs660c32 and fs432c65
  clk: st: STiH407: Support for clockgenA9
  clk: st: STiH407: Support for clockgenD0/D2/D3
  clk: st: STiH407: Support for clockgenC0
  clk: st: Add quadfs reset handling
  clk: st: Add polarity bit indication
  clk: st: STiH407: Support for clockgenA0
  clk: st: STiH407: Support for A9 MUX Clocks
  clk: st: STiH407: Support for Flexgen Clocks
  clk: st: Adds Flexgen clock binding
  clk: st: Remove uncessary (void *) cast
  clk: st: use static const for clkgen_pll_data tables
  clk: st: use static const for stm_fs tables
  clk: st: Update ST clock binding documentation
  ...

Pull libata changes from Tejun Heo:
 "Except for a few, all the changes are for ahci platform drivers for
  the arm devices.  Nothing too interesting or dangerous.  There's one
  merge from libata/for-3.16-fixes to pull in dependent changes"

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits)
  ata: libahci: Silence compiler warning on 64-bit
  Documentation: bindings: document the sub-nodes AHCI bindings
  ata: ahci_platform: add a generic AHCI compatible
  ata: libahci: allow to use multiple PHYs
  ata: libahci_platform: move port_map parameters into the AHCI structure
  ahci: imx: add missing clk_disable_unprepare() on error in imx_sata_enable()
  ahci_xgene: Use correct OOB tunning parameters for APM X-Gene SoC AHCI SATA Host controller driver.
  ahci_xgene: Fix the watermark threshold for the APM X-Gene SATA host controller driver.
  ahci: st: Make of_device_id array const
  sata_sil24: Identify which card suffered IRQ status error
  ahci: st: Provide DT bindings for ST's SATA implementation
  ata: Add support for the Tegra124 SATA controller
  ata: ahci_platform: Increase AHCI_MAX_CLKS to 4
  of: Add NVIDIA Tegra SATA controller binding
  dt-bindings: ata: document ability to disable spread-spectrum clock
  ata: ahci_imx: add disable for spread-spectrum
  dt-bindings: ata: add ahci_imx electrical properties
  ata: ahci_imx: allow hardware parameters to be specified in DT
  dt-bindings: ata: create bindings for imx sata controller
  ata: pata_samsung_cf: removes s5pc100 related ata codes
  ...

Pull cgroup changes from Tejun Heo:
 "Mostly changes to get the v2 interface ready.  The core features are
  mostly ready now and I think it's reasonable to expect to drop the
  devel mask in one or two devel cycles at least for a subset of
  controllers.

   - cgroup added a controller dependency mechanism so that block cgroup
     can depend on memory cgroup.  This will be used to finally support
     IO provisioning on the writeback traffic, which is currently being
     implemented.

   - The v2 interface now uses a separate table so that the interface
     files for the new interface are explicitly declared in one place.
     Each controller will explicitly review and add the files for the
     new interface.

   - cpuset is getting ready for the hierarchical behavior which is in
     the similar style with other controllers so that an ancestor's
     configuration change doesn't change the descendants' configurations
     irreversibly and processes aren't silently migrated when a CPU or
     node goes down.

  All the changes are to the new interface and no behavior changed for
  the multiple hierarchies"

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (29 commits)
  cpuset: fix the WARN_ON() in update_nodemasks_hier()
  cgroup: initialize cgrp_dfl_root_inhibit_ss_mask from !->dfl_files test
  cgroup: make CFTYPE_ONLY_ON_DFL and CFTYPE_NO_ internal to cgroup core
  cgroup: distinguish the default and legacy hierarchies when handling cftypes
  cgroup: replace cgroup_add_cftypes() with cgroup_add_legacy_cftypes()
  cgroup: rename cgroup_subsys->base_cftypes to ->legacy_cftypes
  cgroup: split cgroup_base_files[] into cgroup_{dfl|legacy}_base_files[]
  cpuset: export effective masks to userspace
  cpuset: allow writing offlined masks to cpuset.cpus/mems
  cpuset: enable onlined cpu/node in effective masks
  cpuset: refactor cpuset_hotplug_update_tasks()
  cpuset: make cs->{cpus, mems}_allowed as user-configured masks
  cpuset: apply cs->effective_{cpus,mems}
  cpuset: initialize top_cpuset's configured masks at mount
  cpuset: use effective cpumask to build sched domains
  cpuset: inherit ancestor's masks if effective_{cpus, mems} becomes empty
  cpuset: update cs->effective_{cpus, mems} when config changes
  cpuset: update cpuset->effective_{cpus,mems} at hotplug
  cpuset: add cs->effective_cpus and cs->effective_mems
  cgroup: clean up sane_behavior handling
  ...

Pull percpu updates from Tejun Heo:

 - Major reorganization of percpu header files which I think makes
   things a lot more readable and logical than before.

 - percpu-refcount is updated so that it requires explicit destruction
   and can be reinitialized if necessary.  This was pulled into the
   block tree to replace the custom percpu refcnting implemented in
   blk-mq.

 - In the process, percpu and percpu-refcount got cleaned up a bit

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (21 commits)
  percpu-refcount: implement percpu_ref_reinit() and percpu_ref_is_zero()
  percpu-refcount: require percpu_ref to be exited explicitly
  percpu-refcount: use unsigned long for pcpu_count pointer
  percpu-refcount: add helpers for ->percpu_count accesses
  percpu-refcount: one bit is enough for REF_STATUS
  percpu-refcount, aio: use percpu_ref_cancel_init() in ioctx_alloc()
  workqueue: stronger test in process_one_work()
  workqueue: clear POOL_DISASSOCIATED in rebind_workers()
  percpu: Use ALIGN macro instead of hand coding alignment calculation
  percpu: invoke __verify_pcpu_ptr() from the generic part of accessors and operations
  percpu: preffity percpu header files
  percpu: use raw_cpu_*() to define __this_cpu_*()
  percpu: reorder macros in percpu header files
  percpu: move {raw|this}_cpu_*() definitions to include/linux/percpu-defs.h
  percpu: move generic {raw|this}_cpu_*_N() definitions to include/asm-generic/percpu.h
  percpu: only allow sized arch overrides for {raw|this}_cpu_*() ops
  percpu: reorganize include/linux/percpu-defs.h
  percpu: move accessors from include/linux/percpu.h to percpu-defs.h
  percpu: include/asm-generic/percpu.h should contain only arch-overridable parts
  percpu: introduce arch_raw_cpu_ptr()
  ...

Pull workqueue updates from Tejun Heo:
 "Lai has been doing a lot of cleanups of workqueue and kthread_work.
  No significant behavior change.  Just a lot of cleanups all over the
  place.  Some are a bit invasive but overall nothing too dangerous"

* 'for-3.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  kthread_work: remove the unused wait_queue_head
  kthread_work: wake up worker only when the worker is idle
  workqueue: use nr_node_ids instead of wq_numa_tbl_len
  workqueue: remove the misnamed out_unlock label in get_unbound_pool()
  workqueue: remove the stale comment in pwq_unbound_release_workfn()
  workqueue: move rescuer pool detachment to the end
  workqueue: unfold start_worker() into create_worker()
  workqueue: remove @wakeup from worker_set_flags()
  workqueue: remove an unneeded UNBOUND test before waking up the next worker
  workqueue: wake regular worker if need_more_worker() when rescuer leave the pool
  workqueue: alloc struct worker on its local node
  workqueue: reuse the already calculated pwq in try_to_grab_pending()
  workqueue: stronger test in process_one_work()
  workqueue: clear POOL_DISASSOCIATED in rebind_workers()
  workqueue: sanity check pool->cpu in wq_worker_sleeping()
  workqueue: clear leftover flags when detached
  workqueue: remove useless WARN_ON_ONCE()
  workqueue: use schedule_timeout_interruptible() instead of open code
  workqueue: remove the empty check in too_many_workers()
  workqueue: use "pool->cpu < 0" to stand for an unbound pool

Pull file locking related changes from Jeff Layton:
 "Just a couple of changes from Christoph to start us down the road
  toward getting rid of the fl_owner_t typedef"

* tag 'locks-v3.17-1' of git://git.samba.org/jlayton/linux:
  locks: purge fl_owner_t from fs/locks.c
  locks: typedef fl_owner_t to void *