The commit [0d9741c0: ALSA: usb-audio: sync ep init fix for
audioformat mismatch] introduced the correction of parameters to be
set for sync EP.  But since the new code assumes that the sync EP is
always paired with the data EP of another direction, it triggers Oops
when a device only with a single direction is used.

This patch adds a proper check of sync EP type and the presence of the
paired substream for avoiding the crash.
Reported-and-tested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge tag 'asoc-fix-3.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v3.8

Nothing terribly exciting here except for the DOUBLE_RANGE fix which
just hadn't worked before, nobody noticed due to lack of use.

Added the support for a new codec ALC284, which is compatible with
ALC269.  Also add more codec variants to handle the SSID check
properly.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Fixes the following sparse warning:
sound/usb/mixer_quirks.c:1209:23: warning:
symbol 'ebox44_table' was not declared. Should it be static?
Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull ARM fixes from Russell King.

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7616/1: cache-l2x0: aurora: Use writel_relaxed instead of writel
  ARM: 7615/1: cache-l2x0: aurora: Invalidate during clean operation with WT enable
  ARM: 7614/1: mm: fix wrong branch from Cortex-A9 to PJ4b
  ARM: 7612/1: imx: Do not select some errata that depends on !ARCH_MULTIPLATFORM
  ARM: 7611/1: VIC: fix bug in VIC irqdomain code
  ARM: 7610/1: versatile: bump IRQ numbers
  ARM: 7609/1: disable errata work-arounds which access secure registers
  ARM: 7608/1: l2x0: Only set .set_debug on PL310 r3p0 and earlier

Pull EDAC fixes from Borislav Petkov:
 "Two error path fixes causing a crash and a Kconfig fix for an issue
  which spilled all EDAC suboptions into the 'Device Drivers' menu."

* tag 'edac_fixes_for_3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC: Cleanup device deregistering path
  EDAC: Fix EDAC Kconfig menu
  EDAC: Fix kernel panic on module unloading

The check for a pmd being in the process of being split was dropped by
mistake by commit d10e63f2 ("mm: numa: Create basic numa page
hinting infrastructure"). Put it back.
Reported-by: Dave Jones <davej@redhat.com>
Debugged-by: Hillf Danton <dhillf@gmail.com>
Acked-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Cc: Kirill Shutemov <kirill@shutemov.name>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 3a50597d ("KEYS: Make the session and process keyrings
per-thread") removed the definition of the thread_group_cred structure,
but left a now unused pointer in struct cred.
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Use correct bitmask for AES32 cards to determine wordclock lock state,
add missing bitmask for sync check and make output of the corresponding
control and /proc coherent.
Signed-off-by: Andre Schramm <andre.schramm@iosono-sound.com>
Signed-off-by: Adrian Knoth <adi@drcomp.erfurt.thur.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

This reverts commit 697c373e.

The original patch was meant to remove clicking, but in fact caused even
more clicking instead.

Thanks to c4pp4 for doing most of the work with this bug.

BugLink: https://bugs.launchpad.net/bugs/886975Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

We've got a few bug reports that the runtime D3 results in the dead
HD-audio controller.  It seems that the problem is in a deeper level
than the sound driver itself, so as a temporal solution, disable the
feature for these controllers again.
Reported-and-tested-by: Vincent Blut <vincent.debian@free.fr>
Reported-and-tested-by: Maurizio Avogadro <mavoga@gmail.com>
Cc: <stable@vger.kernel.org> [v3.7]
Signed-off-by: Takashi Iwai <tiwai@suse.de>

Pull ARM SoC fixes from Olof Johansson:
 "People are back from the holiday breaks, and it shows.  Here are a
  bunch of fixes for a number of platforms:
   - A couple of small fixes for Nomadik
   - A larger set of changes for kirkwood/mvebu
     - uart driver selection, dt clocks, gpio-poweroff fixups, a few
       __init annotation fixes and some error handling improvement in
       their xor dma driver.
   - i.MX had a couple of minor fixes (and a critical one for flexcan2
     clock setup)
   - MXS has a small board fix and a framebuffer bugfix
   - A set of fixes for Samsung Exynos, fixing default bootargs and some
     Exynos5440 clock issues
   - A set of OMAP changes including PM fixes and a few sparse warning
     fixups

  All in all a bit more positive code delta than we'd ideally want to
  see here, mostly from the OMAP PM changes, but nothing overly crazy."

* tag 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (44 commits)
  ARM: clps711x: Fix bad merge of clockevents setup
  ARM: highbank: save and restore L2 cache and GIC on suspend
  ARM: highbank: add a power request clear
  ARM: highbank: fix secondary boot and hotplug
  ARM: highbank: fix typos with hignbank in power request functions
  ARM: dts: fix highbank cpu mpidr values
  ARM: dts: add device_type prop to cpu nodes on Calxeda platforms
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  ...

Pull drm update from Dave Airlie:
 "Exynos and Radeon mostly, with a dma-buf and ttm fix thrown in.

  It's a bit big but its mostly exynos license fix ups and I'd rather
  not hold those up since its legally stuff.

  Radeon has a couple of fixes from dma engine work, TTM is just a
  locking fix, and dma-buf fix has been hanging around and I finally got
  a chance to review it."

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (30 commits)
  drm/ttm: fix fence locking in ttm_buffer_object_transfer
  drm/prime: drop reference on imported dma-buf come from gem
  drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks
  drm/exynos: move finish page flip to a common place
  drm/exynos: fimd: modify condition in fimd resume
  drm/radeon: fix DMA CS parser for r6xx linear copy packet
  drm/radeon: split r6xx and r7xx copy_dma functions
  drm/exynos: Use devm_clk_get in exynos_drm_gsc.c
  drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c
  drm/exynos: Use devm_clk_get in exynos_drm_rotator.c
  drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c
  drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c
  drm/exynos: Use devm_clk_get in exynos_drm_fimc.c
  drm/exynos: Remove redundant NULL check
  drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c
  drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c
  drm/exynos: fix gem buffer allocation type checking
  drm/exynos: remove needless parenthesis.
  drm/exynos: fix incorrect interrupt induced by m2m operation.
  ...

Merge tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

From Tony Lindgren:
The biggest change is a fix to deal with different power state
on omap2 registers that causes issues trying to use common PM code.
Also fix few incorrect registers, and an issue for omap1 USB, and
few sparse fixes for issues that sneaked in with all the clean-up.

* tag 'omap-for-v3.8-rc2/fixes-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs array
  ARM: OMAP1: fix USB configuration use-after-release
  ARM: OMAP2/3: PRM: fix bogus OMAP2xxx powerstate return values
  ARM: OMAP3: clock data: Add missing enable/disable for EMU clock
  ARM: OMAP4: PRM: Correct wrong instance usage for reading reset sources
  ARM: OMAP4: PRM: fix RSTTIME and RSTST offsets
  ARM: OMAP4: PRM: Correct reset source map
  ARM: OMAP: SRAM: resolve sparse warnings
  ARM: OMAP AM33xx: hwmod data: resolve sparse warnings
  ARM: OMAP: 32k counter: resolve sparse warnings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge branch 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into fixes

From Kukjin Kim:
Most of them are EXYNOS5440 fixes which are for changing uart console,
cpu id (typo)  and silent complaining gpio error in kernel boot.

* 'v3.8-samsung-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: EXYNOS: skip the clock initialization for exynos5440
  ARM: EXYNOS: enable PINCTRL for EXYNOS5440
  ARM: dts: use uart port1 for console on exynos4210-smdkv310
  ARM: dts: use uart port0 for console on exynos5440-ssdk5440
  ARM: SAMSUNG: fix the cpu id for EXYNOS5440
  ARM: EXYNOS: Revise HDMI resource size

From Shawn Guo:
I have to send one critical mxsfb fix through arm-soc, as FB maintainer
is unresponsive for quite a while.  People start complaining the missing
of such an important fix.

* tag 'mxs-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  video: mxsfb: fix crash when unblanking the display
  ARM: dts: imx23-olinuxino: Fix IOMUX settings

From Shawn Guo:

It includes one critical fix - wrong flexcan2 clock will hang system
when the port gets brought up.  The other two are non-critical fixes,
which are sent together here, since it's still early -rc stage.

* tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6:
  ARM: mx5: Fix MX53 flexcan2 clock
  ARM: dts: imx31-bug: Fix manufacturer compatible string
  clk: imx: Remove 'clock-output-names' from the examples

Pull sound fixes from Takashi Iwai:
 "Nothing too exciting here, just a few regression and trivial fixes,
  and new quirks for HD-audio and USB-audio.

   - HD-audio mute LED mode enum fix
   - Fix kernel panic of Digidesign Mbox2 usb-audio quirk (which was new
     in 3.8-rc1)
   - Creative BT-D1 usb-audio quirk
   - mute LED fixup for HP Pavillion 17 laptop"

* tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec)
  ALSA: au88x0: fix incorrect left shift
  sound: oss/pas2: Fix possible access out of array
  ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk
  ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks
  ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrol

Pull networking fixes from David Miller:

 1) New sysctl ndisc_notify needs some documentation, from Hanns
    Frederic Sowa.

 2) Netfilter REJECT target doesn't set transport header of SKB
    correctly, from Mukund Jampala.

 3) Forcedeth driver needs to check for DMA mapping failures, from Larry
    Finger.

 4) brcmsmac driver can't use usleep_range while holding locks, use
    udelay instead.  From Niels Ole Salscheider.

 5) Fix unregister of netlink bridge multicast database handlers, from
    Vlad Yasevich and Rami Rosen.

 6) Fix checksum calculations in netfilter's ipv6 network prefix
    translation module.

 7) Fix high order page allocation failures in netfilter xt_recent, from
    Eric Dumazet.

 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because
    mac802154_process_data() can execute in process rather than
    interrupt context.  From Alexander Aring.

 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one
    tcp_push() too many.  From Eric Dumazet and Willy Tarreau.

10) Fix skb->truesize tracking in XEN netfront driver, from Ian
    Campbell.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits)
  xen/netfront: improve truesize tracking
  ipv4: fix NULL checking in devinet_ioctl()
  tcp: fix MSG_SENDPAGE_NOTLAST logic
  net/ipv4/ipconfig: really display the BOOTP/DHCP server's address.
  ip-sysctl: fix spelling errors
  mac802154: fix NOHZ local_softirq_pending 08 warning
  ipv6: document ndisc_notify in networking/ip-sysctl.txt
  ath9k: Fix Kconfig for ATH9K_HTC
  netfilter: xt_recent: avoid high order page allocations
  netfilter: fix missing dependencies for the NOTRACK target
  netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation
  bridge: add empty br_mdb_init() and br_mdb_uninit() definitions.
  vxlan: allow live mac address change
  bridge: Correctly unregister MDB rtnetlink handlers
  brcmfmac: fix parsing rsn ie for ap mode.
  brcmsmac: add copyright information for Canonical
  rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call
  rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call
  ...

This patch fixes some code that implements a work-around to a hardware bug in
the ac97 controller on the pxa27x.  A bug in the controller's warm reset
functionality requires that the mfp used by the controller as the AC97_nRESET
line be temporarily reconfigured as a generic output gpio (AF0) and manually
held high for the duration of the warm reset cycle.  This is what was done in
the original code, but it was broken long ago by commit fb1bf8cd
    ([ARM] pxa: introduce processor specific pxa27x_assert_ac97reset())
which changed the mfp to a GPIO input instead of a high output.

The fix requires the ac97 controller to obtain the gpio via gpio_request_one(),
with arguments that configure the gpio as an output initially driven high.

Tested on a palm treo 680 machine.  Reportedly, this broken code only prevents a
warm reset on hardware that lacks a pull-up on the line, which appears to be the
case for me.
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Cold reset on the pxa27x currently fails and

     pxa2xx_ac97_try_cold_reset: cold reset timeout (GSR=0x44)

appears in the kernel log.  Through trial-and-error (the pxa270 developer's
manual is mostly incoherent on the topic of ac97 reset), I got cold reset to
complete by setting the WARM_RST bit in the GCR register (and later noticed that
pxa3xx does this for cold reset as well).  Also, a timeout loop is needed to
wait for the reset to complete.

Tested on a palm treo 680 machine.
Signed-off-by: Mike Dunn <mikedunn@newsguy.com>
Acked-by: Igor Grinberg <grinberg@compulab.co.il>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Noticed while reviewing the fence locking in the radeon pageflip
handler.

v2: Instead of grabbing the bdev->fence_lock in object_transfer just
move the single callsite of that function a few lines, so that it is
protected by the fence_lock. Suggested by Jerome Glisse.

v3: Fix typo in commit message.
Reviewed-by: Jerome Glisse <jglisse@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

From Jason Cooper:

fixes for mvebu/kirkwood v3.8
 - use correct uart driver for mvebu boards
 - add a missing DT clocks
 - gpio-poweroff level vs. edge triggering, use gpio_is_valid()
 - remove an inappropriate __init, modules need to access function.
 - various DT fixes
 - error handling in mv_xor

* tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux:
  pinctrl: mvebu: make pdma clock on dove mandatory
  ARM: Dove: Add pinctrl clock to DT
  dma: mv_xor: fix error handling for clocks
  dma: mv_xor: fix error handling of mv_xor_channel_add()
  arm: mvebu: Add missing ; for cpu node.
  arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces
  arm: mvebu: Armada XP MV78230 has two cores, not one
  clk: mvebu: Remove inappropriate __init tagging
  ARM: Kirkwood: Use fixed-regulator instead of board gpio call
  ARM: Kirkwood: Fix missing sdio clock
  ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers
  Power: gpio-poweroff: Fix documentation and gpio_is_valid
  ARM: Kirkwood: Fix missing clk for USB device.
  arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver
Signed-off-by: Olof Johansson <olof@lixom.net>

I mismerged a previous branch from Alexander, and accidentally left
in ARCH_USES_GETTIMEOFFSET. Remove it.
Signed-off-by: Olof Johansson <olof@lixom.net>
Cc: Alexander Shiyan <shc_work@mail.ru>

Merge tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes

From Linus Walleij:
Two fixes to the Nomadik:
- Delete a dangling include
- Bump IRQ numbers to offset at 32

* tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: nomadik: bump the IRQ numbers again
  ARM: nomadik: delete dangling include

This fixes suspend to RAM adding necessary save and restore of L2 and GIC.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>

When we fail to power down, we need to clear out the power request.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Olof Johansson <olof@lixom.net>