- 22 Apr, 2019 31 commits
-
-
Akinobu Mita authored
Avoid returning with mutex locked. Fixes: fa8cb644 ("[media] ov2659: Don't depend on subdev API") Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Akinobu Mita authored
This driver returns an error if unsupported media bus pixel code is requested by VIDIOC_SUBDEV_S_FMT. But according to Documentation/media/uapi/v4l/vidioc-subdev-g-fmt.rst, Drivers must not return an error solely because the requested format doesn't match the device capabilities. They must instead modify the format to match what the hardware can provide. So select default format code and return success in that case. This is detected by v4l2-compliance. Cc: "Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
Register V4L2 subdevice implemented by the driver to the V4L2 asynchronous subdevice framework. [Sakari Ailus: Remove extra call to v4l2_i2c_subdev_set_name] Signed-off-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
-
Janusz Krzysztofik authored
In preparation for adding asynchronous subdevice support to the driver, don't acquire v4l2_clk from the driver .probe() callback as that may fail if the clock is provided by a bridge driver which may be not yet initialized. Move the v4l2_clk_get() to ov6650_video_probe() helper which is going to be converted to v4l2_subdev_internal_ops.registered() callback, executed only when the bridge driver is ready. Signed-off-by:
-
Janusz Krzysztofik authored
After removal of clock_start() from before soc_camera_init_i2c() in soc_camera_probe() by commit 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") introduced in v3.11, the ov6650 driver could no longer probe the sensor successfully because its clock was no longer turned on in advance. The issue was initially worked around by adding that missing clock_start() equivalent to OMAP1 camera interface driver - the only user of this sensor - but a propoer fix should be rather implemented in the sensor driver code itself. Fix the issue by inserting a delay between the clock is turned on and the sensor I2C registers are read for the first time. Tested on Amstrad Delta with now out of tree but still locally maintained omap1_camera host driver. Fixes: 9aea470b ("[media] soc-camera: switch I2C subdevice drivers to use v4l2-clk") Signed-off-by:
-
Hans Verkuil authored
If the application was streaming from both videoX and vbiX, and streaming from videoX was stopped, then the vbi streaming also stopped. The cause being that stop_streaming for video stopped the subdevs as well, instead of only doing that if dev->streaming_users reached 0. au0828_stop_vbi_streaming was also wrong since it didn't stop the subdevs at all when dev->streaming_users reached 0. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by:
Shuah Khan <shuah@kernel.org> Signed-off-by:
-
Shuah Khan authored
Fix media_devnode_unregister() to clear devnode->media_dev while holding media_devnode_lock. media_devnode_register()'s cdev_add_error handling does this correctly. Signed-off-by:
-
Shuah Khan authored
Fix au0828_analog_stream_enable() to check if device is in the right state first. When unbind happens while bind is in progress, usbdev pointer could be invalid in au0828_analog_stream_enable() and a call to usb_ifnum_to_if() will result in the null pointer dereference. This problem is found with the new media_dev_allocator.sh test. kernel: [ 590.359623] BUG: unable to handle kernel NULL pointer dereference at 00000000000004e8 kernel: [ 590.359627] #PF error: [normal kernel read fault] kernel: [ 590.359629] PGD 0 P4D 0 kernel: [ 590.359632] Oops: 0000 [#1] SMP PTI kernel: [ 590.359634] CPU: 3 PID: 1458 Comm: v4l_id Not tainted 5.1.0-rc2+ #30 kernel: [ 590.359636] Hardware name: Dell Inc. OptiPlex 7 90/0HY9JP, BIOS A18 09/24/2013 kernel: [ 590.359641] RIP: 0010:usb_ifnum_to_if+0x6/0x60 kernel: [ 590.359643] Code: 5d 41 5e 41 5f 5d c3 48 83 c4 10 b8 fa ff ff ff 5b 41 5c 41 5d 41 5e 41 5f 5d c3 b8 fa ff ff ff c3 0f 1f 00 6 6 66 66 66 90 55 <48> 8b 97 e8 04 00 00 48 89 e5 48 85 d2 74 41 0f b6 4a 04 84 c 9 74 kernel: [ 590.359645] RSP: 0018:ffffad3cc3c1fc00 EFLAGS: 00010246 kernel: [ 590.359646] RAX: 0000000000000000 RBX: ffff8ded b1f3c000 RCX: 1f377e4500000000 kernel: [ 590.359648] RDX: ffff8dedfa3a6b50 RSI: 00000000 00000000 RDI: 0000000000000000 kernel: [ 590.359649] RBP: ffffad3cc3c1fc28 R08: 00000000 8574acc2 R09: ffff8dedfa3a6b50 kernel: [ 590.359650] R10: 0000000000000001 R11: 00000000 00000000 R12: 0000000000000000 kernel: [ 590.359652] R13: ffff8dedb1f3f0f0 R14: ffffffff adcf7ec0 R15: 0000000000000000 kernel: [ 590.359654] FS: 00007f7917198540(0000) GS:ffff 8dee258c0000(0000) knlGS:0000000000000000 kernel: [ 590.359655] CS: 0010 DS: 0000 ES: 0000 CR0: 00 00000080050033 kernel: [ 590.359657] CR2: 00000000000004e8 CR3: 00000001 a388e002 CR4: 00000000000606e0 kernel: [ 590.359658] Call Trace: kernel: [ 590.359664] ? au0828_analog_stream_enable+0x2c/0x180 kernel: [ 590.359666] au0828_v4l2_open+0xa4/0x110 kernel: [ 590.359670] v4l2_open+0x8b/0x120 kernel: [ 590.359674] chrdev_open+0xa6/0x1c0 kernel: [ 590.359676] ? cdev_put.part.3+0x20/0x20 kernel: [ 590.359678] do_dentry_open+0x1f6/0x360 kernel: [ 590.359681] vfs_open+0x2f/0x40 kernel: [ 590.359684] path_openat+0x299/0xc20 kernel: [ 590.359688] do_filp_open+0x9b/0x110 kernel: [ 590.359695] ? _raw_spin_unlock+0x27/0x40 kernel: [ 590.359697] ? __alloc_fd+0xb2/0x160 kernel: [ 590.359700] do_sys_open+0x1ba/0x260 kernel: [ 590.359702] ? do_sys_open+0x1ba/0x260 kernel: [ 590.359712] __x64_sys_openat+0x20/0x30 kernel: [ 590.359715] do_syscall_64+0x5a/0x120 kernel: [ 590.359718] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Signed-off-by:
-
Shuah Khan authored
Add a new test for Media Device Allocator API. Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. This test does a series of unbind/bind tests to make sure media device is released correctly when it is no longer is use and when the last driver releases the reference. Signed-off-by:
-
Shuah Khan authored
Enable and disable source interfaces aren't consistent in enforcing how video and audio share the tuner resource. Fix these issues to enforce the following rules and allow sharing between audio and video applications. - When DVB is streaming, audio/video/vbi/s-video/composite should find the resource busy. DVB holds the tuner in exclusive mode. - When video/VBI is streaming, audio can share the tuner and vice versa. - v4l2 allows multiple applications to open video device. - Video applications call enable source multiple times during their run-time. Resource should stay locked until the last application releases it. - A shared resource should stay in shared state and locked when it is in use by audio and video. More than one video application is allowed to use the tuner as long as video streaming protocol allows such usage. Resource is released when the last video/audio application releases it. - S-Video and Composite hold the resource in exclusive mode. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Change the ALSA driver to use the Media Controller API to share media resources with DVB, and V4L2 drivers on a AU0828 media device. The Media Controller specific initialization is done after sound card is registered. ALSA creates Media interface and entity function graph nodes for Control, Mixer, PCM Playback, and PCM Capture devices. snd_usb_hw_params() will call Media Controller enable source handler interface to request the media resource. If resource request is granted, it will release it from snd_usb_hw_free(). If resource is busy, -EBUSY is returned. Media specific cleanup is done in usb_audio_disconnect(). Reviewed-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Shuah Khan authored
Move PCM_CAPTURE, PCM_PLAYBACK, and CONTROL ALSA MEDIA_INTF_T* interface types back into __KERNEL__ scope to get ready for adding ALSA support for these to the media controller. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Change au0828 to use Media Device Allocator API to allocate media device with the parent usb struct device as the key, so it can be shared with the snd_usb_audio driver. Signed-off-by:
-
Shuah Khan authored
Media Device Allocator API to allows multiple drivers share a media device. This API solves a very common use-case for media devices where one physical device (an USB stick) provides both audio and video. When such media device exposes a standard USB Audio class, a proprietary Video class, two or more independent drivers will share a single physical USB bridge. In such cases, it is necessary to coordinate access to the shared resource. Using this API, drivers can allocate a media device with the shared struct device as the key. Once the media device is allocated by a driver, other drivers can get a reference to it. The media device is released when all the references are released. Signed-off-by:
-
Hugues Fruchet authored
Do not access sd_formats[] if num_of_sd_formats is zero, ie subdev sensor didn't expose any formats. Signed-off-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
Hugues Fruchet authored
Report overrun error only when it exceeds a given threshold. Signed-off-by:
-
Hugues Fruchet authored
Revisit and add some error messages. Signed-off-by:
-
Colin Ian King authored
There are several places where a break statement occurs before a following break statement; these are unnecessary and can be removed to clean up the code a little. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
-
Yunfei Dong authored
Enlarge the plane number to support more complex case and add the support for fmt change case. Signed-off-by:
Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by:
-
Sergei Shtylyov authored
The image renderer (IMR), or the distortion correction engine, is a drawing processor with a simple instruction system capable of referencing video capture data or data in an external memory as the 2D texture data and performing texture mapping and drawing with respect to any shape that is split into triangular objects. Document the device tree bindings for the image renderer light extended 4 (IMR-LX4) found in the R-Car gen3 SoCs... Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Wolfram Sang authored
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
-
Helen Fornazier authored
Media bus codes were being mapped to pixelformats, which causes a limitation on vimc because not all pixelformats can be mapped to media bus codes. Also, media bus codes are an internal configuration from the device. Userspace only assures media bus codes matches between pads and expects the image in a given pixelformat. So we can allow almost any media bus format to be configured between pads, except for debayer that expects a media bus code of type bayer in the sink pad. [hverkuil-cisco@xs4all.nl: drop use of v4l2_get_fourcc_name: not yet available] [hverkuil-cisco@xs4all.nl: made vimc_mbus_list static] Signed-off-by:
Helen Koike <helen.koike@collabora.com> Signed-off-by:
-
Helen Fornazier authored
Add bayer format information in struct v4l2_format_info table. Signed-off-by:
-
Ezequiel Garcia authored
Add two new API helpers, v4l2_fill_pixfmt and v4l2_fill_pixfmt_mp, to be used by drivers to calculate plane sizes and bytes per lines. Note that driver-specific padding and alignment are not taken into account, and must be done by drivers using this API. Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Ezequiel Garcia authored
The rockchip VPU driver uses generic names for its pixel format helpers. We want to use the same names for generic versions of these helpers, so rename the rockchip ones. The driver will be switched to the generic helpers later. Signed-off-by:
-
Ezequiel Garcia authored
Minor fix for helper function and comment, s/v4l2_vb2_buffer/vb2_v4l2_buffer. Signed-off-by:
-
Hans Verkuil authored
Somehow the string "Controls name" got pasted in two places where it doesn't belong. Remove that text. Signed-off-by:
-
Yannick Fertre authored
It is mandatory to write CEC_CFGR only when CECEN=0. To protect transmission, a check have been added to delayed logical address modification. This patch is necessary tp pass all tests of compliance. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Eugen Hristev authored
ISC will output the "ARGB32" configuration in byte order: B, G, R, Alpha. This is in fact the format BGRA, aka ABGR32. If alpha is missing, the same format is equivalent to XBGR32. Added both formats and removed ARGB32 which is wrong. Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
This change is a redesign in the formats and the way the ISC is configured w.r.t. sensor format and the output format from the ISC. I have changed the splitting between sensor output (which is also ISC input) and ISC output. The sensor format represents the way the sensor is configured, and what ISC is receiving. The format configuration represents the way ISC is interpreting the data and formatting the output to the subsystem. Now it's much easier to figure out what is the ISC configuration for input, and what is the configuration for output. The non-raw format can be obtained directly from sensor or it can be done inside the ISC. The controller format list will include a configuration for each format. The old supported formats are still in place, if we want to dump the sensor format directly to the output, the try format routine will detect and configure the pipeline accordingly. This also fixes the previous issues when the raw format was NULL which resulted in many crashes for sensors which did not have the expected/tested formats. Signed-off-by:
-
Fish Lin authored
Add following V4L2 QP parameters for H.264: * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_I_FRAME_MAX_QP * V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MIN_QP * V4L2_CID_MPEG_VIDEO_H264_P_FRAME_MAX_QP These controls will limit QP range for intra and inter frame, provide more manual control to improve video encode quality. Signed-off-by:
Fish Lin <linfish@google.com> Signed-off-by:
-
- 30 Mar, 2019 4 commits
-
-
Mauro Carvalho Chehab authored
With LaTex, the Index at the end will always be present. Having an extra chapter for it there will just add extra noise to the document. Signed-off-by: -
Mauro Carvalho Chehab authored
Avoid cell overlapping by changing some sizes, and changing the font sizes when needed. Tested with Sphinx 1.7.8. Signed-off-by: -
Mauro Carvalho Chehab authored
Some lines inside this table has more than 34 columns, which isn't what is expected, according to the .. tabularcolumns:: definition. That causes the PDF output to fail. This patch ensures that all columns will have exactly the same size, merging the unused ones using :cpan: Signed-off-by: -
Mauro Carvalho Chehab authored
There are a few left overs at staging which were still using the deprecated strlcpy() function. Reviewed-by:
-
- 29 Mar, 2019 5 commits
-
-
Sakari Ailus authored
Remove a few files left over from the mt9t031 driver. While at it, add a TODO file for the SoC camera framework as a whole. Signed-off-by:
-
Sakari Ailus authored
The SoC camera was moved to the staging tree but we missed updating MAINTAINERS. Do that now. Fixes: 280de94a ("media: soc_camera: Move to the staging tree") Reported-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Akinobu Mita authored
The exposure control is clustered with the autoexposure control and flagged as volatile, but the g_volatile_ctrl() doesn't handle V4L2_CID_EXPOSURE_AUTO. So, the value of the exposure control can't be read in autoexposure mode. This enables to get the exposure control in autoexposure mode by making ov7740_get_volatile_ctrl() deal with V4L2_CID_EXPOSURE_AUTO. This also sets the exposure control as volatile by specifying the argument to v4l2_ctrl_auto_cluster() instead of manually flagging it. Cc: Wenyou Yang <wenyou.yang@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Instead of doing the cast, just change the type to char. Suggested-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Mauro Carvalho Chehab authored
The strncpy() function is being deprecated upstream. Replace it by the safer strscpy(). While here, replace a few occurences of strlcpy() that were recently added to also use strscpy(). Reviewed-by:
-
