flush_scheduled_work() is deprecated and scheduled to be removed.
sync_stop() currently cancels cpu_buffer works inside buffer_mutex and
flushes the system workqueue outside.  Instead, split end_cpu_work()
into two parts - stopping further work enqueues and flushing works -
and do the former inside buffer_mutex and latter outside.

For stable kernels v2.6.35.y and v2.6.36.y.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>

The kernel build with CONFIG_OPROFILE and CPU_HOTPLUG enabled.
The oprofile is initialised using system timer in absence of hardware
counters supports. Oprofile isn't started from userland.

In this setup while doing a CPU offline the kernel hangs in infinite
for loop inside lock_hrtimer_base() function

This happens because as part of oprofile_cpu_notify(, it tries to
stop an hrtimer which was never started. These per-cpu hrtimers
are started when the oprfile is started.
	echo 1	> /dev/oprofile/enable

This problem also existwhen the cpu is booted with maxcpus parameter
set. When bringing the remaining cpus online the timers are started
even if oprofile is not yet enabled.

This patch fix this issue by adding a state variable so that
these hrtimer start/stop is only attempted when oprofile is
started

For stable kernels v2.6.35.y and v2.6.36.y.
Reported-by: Jan Sebastien <s-jan@ti.com>
Tested-by: sricharan <r.sricharan@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Cc: stable@kernel.org
Signed-off-by: Robert Richter <robert.richter@amd.com>

Conflicts:
	arch/x86/oprofile/op_model_amd.c
Signed-off-by: Robert Richter <robert.richter@amd.com>

This branch depends on these apic patches:

      apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
      apic, x86: Check if EILVT APIC registers are available (AMD only)
Signed-off-by: Robert Richter <robert.richter@amd.com>

Remove text_mutex locking in optimize_all_kprobes, because
this function doesn't modify text. It simply queues probes on
optimization list for kprobe_optimizer worker thread.
Signed-off-by: Masami Hiramatsu <mhiramat@redhat.com>
Cc: Ananth N Mavinakayanahalli <ananth@in.ibm.com>
Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <20101025131801.19160.70939.stgit@ltc236.sdl.hitachi.co.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Stephen Rothwell reported this build warning:

  arch/x86/oprofile/op_model_amd.c: In function 'ibs_eilvt_valid':
  arch/x86/oprofile/op_model_amd.c:289: warning: 'offset' may be used uninitialized in this function

And correctly observed that indeed the variable is used uninitialized in
this function. The result of this bug can be a debug printk with a bogus
value.

Also fix a few more small details that made this function hard to read
and which probably contributed to the bug being introduced to begin with:

 - Use more symmetric error conditions

 - Remove the !0 obfuscation

 - Add newlines to the printk output

 - Remove bogus linebreaks in printk strings and elsewhere
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20101025115736.41d51abe.sfr@canb.auug.org.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Kosina <trivial@kernel.org>
LKML-Reference: <cd9855af60d7d90e9f55fc7afd0ed23fcdaa6f52.1287724261.git.joe@perches.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Merge branch 'perf/core' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux-2.6 into perf/urgent

We wrap it in libslang.h because we need to deal with older slang release
where HAVE_LONG_LONG is referenced as:

So we need to define it.

Noticed when rebuilding the perf tools on a RHEL5 machine.

Cc: Frédéric Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <new-submission>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge branch 'tip/perf/core-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-trace into perf/urgent

This new version (see commit 8e5fc1a7) is much simpler and ensures that
in case of error in group_sched_in() during event_sched_in(), the
events up to the failed event go through regular event_sched_out().
But the failed event and the remaining events in the group have their
timings adjusted as if they had also gone through event_sched_in() and
event_sched_out(). This ensures timing uniformity across all events in
a group. This also takes care of the tstamp_stopped problem in case
the group could never be scheduled. The tstamp_stopped is updated as
if the event had actually run.

With this patch, the following now reports correct time_enabled,
in case the NMI watchdog is active:

$ task -e unhalted_core_cycles,instructions_retired,baclears,baclears
noploop 1
noploop for 1 seconds

0 unhalted_core_cycles (100.00% scaling, ena=997,552,872, run=0)
0 instructions_retired (100.00% scaling, ena=997,552,872, run=0)
0 baclears (100.00% scaling, ena=997,552,872, run=0)
0 baclears (100.00% scaling, ena=997,552,872, run=0)

And the older test case also works:

$ task -einstructions_retired,baclears,baclears -e
unhalted_core_cycles,baclears,baclears sleep 5

1680885 instructions_retired (69.39% scaling, ena=950756, run=291006)
  10735 baclears (69.39% scaling, ena=950756, run=291006)
  10735 baclears (69.39% scaling, ena=950756, run=291006)

      0 unhalted_core_cycles (100.00% scaling, ena=817932, run=0)
      0 baclears (100.00% scaling, ena=817932, run=0)
      0 baclears (100.00% scaling, ena=817932, run=0)
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cbeeebc.8ee7d80a.5a28.0d5f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

This patch reverts commit 8e5fc1a7 (perf_events: Fix transaction
recovery in group_sched_in()) because it had one flaw in case the
group could never be scheduled. It would cause time_enabled to get
negative.
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <4cbeeeb7.0aefd80a.6e40.0e2f@mx.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

For performance reasons its best to use memory node local memory for
per-cpu buffers.

This logic comes from a much larger patch proposed by Stephane.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.514465326@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Now that reserve_ds_buffers() never fails, change it to return
void and remove all code dealing with the error return.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.462621937@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Currently PEBS/BTS buffers are allocated when we instantiate the first
event, when this fails everything fails.

This is a problem because esp. BTS tries to allocate a rather large
buffer (64K), which can easily fail.

This patch changes the logic such that when either buffer allocation
fails, we simply don't allow events that would use these facilities,
but continue functioning for all other events.

This logic comes from a much larger patch proposed by Stephane.
Suggested-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.354429461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

In case we don't have PEBS, the LBR fixup doesn't make sense.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.354429461@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Again, mostly a cleanup to unclutter the reserve_ds_buffer() code.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.304495776@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

Mostly a cleanup.. it reduces code indentation and makes the code flow
of reserve_ds_buffers() clearer.
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.253453452@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

So that we may grow additional call-sites..
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Stephane Eranian <eranian@google.com>
LKML-Reference: <20101019134808.196793164@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (71 commits)
  powerpc/44x: Update ppc44x_defconfig
  powerpc/watchdog: Make default timeout for Book-E watchdog a Kconfig option
  fsl_rio: Add comments for sRIO registers.
  powerpc/fsl-booke: Add e55xx (64-bit) smp defconfig
  powerpc/fsl-booke: Add p5020 DS board support
  powerpc/fsl-booke64: Use TLB CAMs to cover linear mapping on FSL 64-bit chips
  powerpc/fsl-booke: Add support for FSL Arch v1.0 MMU in setup_page_sizes
  powerpc/fsl-booke: Add support for FSL 64-bit e5500 core
  powerpc/85xx: add cache-sram support
  powerpc/85xx: add ngPIXIS FPGA device tree node to the P1022DS board
  powerpc: Fix compile error with paca code on ppc64e
  powerpc/fsl-booke: Add p3041 DS board support
  oprofile/fsl emb: Don't set MSR[PMM] until after clearing the interrupt.
  powerpc/fsl-booke: Add PCI device ids for P2040/P3041/P5010/P5020 QoirQ chips
  powerpc/mpc8xxx_gpio: Add support for 'qoriq-gpio' controllers
  powerpc/fsl_booke: Add support to boot from core other than 0
  powerpc/p1022: Add probing for individual DMA channels
  powerpc/fsl_soc: Search all global-utilities nodes for rstccr
  powerpc: Fix invalid page flags in create TLB CAM path for PTE_64BIT
  powerpc/mpc83xx: Support for MPC8308 P1M board
  ...

Fix up conflict with the generic irq_work changes in arch/powerpc/kernel/time.c

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (26 commits)
  include/linux/libata.h: fix typo
  pata_bf54x: fix return type of bfin_set_devctl
  Drivers: ata: Makefile: replace the use of <module>-objs with <module>-y
  libahci: fix result_tf handling after an ATA PIO data-in command
  pata_sl82c105: implement sff_irq_check() method
  pata_sil680: implement sff_irq_check() method
  pata_pdc202xx_old: implement sff_irq_check() method
  pata_cmd640: implement sff_irq_check() method
  ata_piix: Add device ID for ICH4-L
  pata_sil680: make sil680_sff_exec_command() 'static'
  ata: Intel IDE-R support
  libata: reorder ata_queued_cmd to remove alignment padding on 64 bit builds
  libata: Signal that our SATL supports WRITE SAME(16) with UNMAP
  ata_piix: remove SIDPR locking
  libata: implement cross-port EH exclusion
  libata: add @ap to ata_wait_register() and introduce ata_msleep()
  ata_piix: implement LPM support
  libata: implement LPM support for port multipliers
  libata: reimplement link power management
  libata: implement sata_link_scr_lpm() and make ata_dev_set_feature() global
  ...

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2: (48 commits)
  ocfs2: Avoid to evaluate xattr block flags again.
  ocfs2/cluster: Release debugfs file elapsed_time_in_ms
  ocfs2: Add a mount option "coherency=*" to handle cluster coherency for O_DIRECT writes.
  Initialize max_slots early
  When I tried to compile I got the following warning: fs/ocfs2/slot_map.c: In function ‘ocfs2_init_slot_info’: fs/ocfs2/slot_map.c:360: warning: ‘bytes’ may be used uninitialized in this function fs/ocfs2/slot_map.c:360: note: ‘bytes’ was declared here Compiler: gcc version 4.4.3 (GCC) on Mandriva I'm not sure why this warning occurs, I think compiler don't know that variable "bytes" is initialized when it is sent by reference to ocfs2_slot_map_physical_size and it throws that ugly warning. However, a simple initialization of "bytes" variable with 0 will fix it.
  ocfs2: validate bg_free_bits_count after update
  ocfs2/cluster: Bump up dlm protocol to version 1.1
  ocfs2/cluster: Show per region heartbeat elapsed time
  ocfs2/cluster: Add mlogs for heartbeat up/down events
  ocfs2/cluster: Create debugfs dir/files for each region
  ocfs2/cluster: Create debugfs files for live, quorum and failed region bitmaps
  ocfs2/cluster: Maintain bitmap of failed regions
  ocfs2/cluster: Maintain bitmap of quorum regions
  ocfs2/cluster: Track bitmap of live heartbeat regions
  ocfs2/cluster: Track number of global heartbeat regions
  ocfs2/cluster: Maintain live node bitmap per heartbeat region
  ocfs2/cluster: Reorganize o2hb debugfs init
  ocfs2/cluster: Check slots for unconfigured live nodes
  ocfs2/cluster: Print messages when adding/removing nodes
  ocfs2/cluster: Print messages when adding/removing heartbeat regions
  ...

Merge branch 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-memblock-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (74 commits)
  x86-64: Only set max_pfn_mapped to 512 MiB if we enter via head_64.S
  xen: Cope with unmapped pages when initializing kernel pagetable
  memblock, bootmem: Round pfn properly for memory and reserved regions
  memblock: Annotate memblock functions with __init_memblock
  memblock: Allow memblock_init to be called early
  memblock/arm: Fix memblock_region_is_memory() typo
  x86, memblock: Remove __memblock_x86_find_in_range_size()
  memblock: Fix wraparound in find_region()
  x86-32, memblock: Make add_highpages honor early reserved ranges
  x86, memblock: Fix crashkernel allocation
  arm, memblock: Fix the sparsemem build
  memblock: Fix section mismatch warnings
  powerpc, memblock: Fix memblock API change fallout
  memblock, microblaze: Fix memblock API change fallout
  x86: Remove old bootmem code
  x86, memblock: Use memblock_memory_size()/memblock_free_memory_size() to get correct dma_reserve
  x86: Remove not used early_res code
  x86, memblock: Replace e820_/_early string with memblock_
  x86: Use memblock to replace early_res
  x86, memblock: Use memblock_debug to control debug message print out
  ...

Fix up trivial conflicts in arch/x86/kernel/setup.c and kernel/Makefile

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

The new devctl func added for us to the driver has the wrong return
type.  Which is to say there shouldn't be any.  This fixes compile
time warnings as there shouldn't be any runtime difference.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Changed <module>-objs to <module>-y in Makefile.
Signed-off-by: Tracey Dent <tdent48227@gmail.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ATA devices don't send D2H Reg FIS after an successful ATA PIO data-in
command.  The host is supposed to take the TF and E_Status of the
preceding PIO Setup FIS.  Update ahci_qc_fill_rtf() such that it takes
TF + E_Status from PIO Setup FIS after a successful ATA PIO data-in
command.

Without this patch, result_tf for such a command is filled with the
content of the previous D2H Reg FIS which belongs to a previous
command, which can make the command incorrectly seen as failed.

* Patch updated to grab the whole TF + E_Status from PIO Setup FIS
  instead of just E_Status as suggested by Robert Hancock.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Mark Lord <kernel@teksavvy.com>
Cc: Robert Hancock <hancockrwd@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

ICH4-L is a variant of ICH4 lacking USB2 functionality and with some
different device IDs.

It is documented in Intel specification update 290745-025, currently
at <http://www.intel.com/assets/pdf/specupdate/290745.pdf>, and is
included in the device ID table for piix.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

... since, of course, it's not used outside this driver.
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Intel IDE-R devices are part of the Intel AMT management setup. They don't
have any special configuration registers or settings so the ata_generic
driver will support them fully.

Rather than add a huge table of IDs for each chipset and keep sending in
new ones this patch autodetects them.
Signed-off-by: Alan Cox <alan@linux.intel.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Reorder structure ata_queued_cmd to remove 8 bytes of alignment padding
on 64 bit builds & therefore reduce the size of structure ata_port by
256 bytes.

Overall this will have little impact, other than reducing the amount of
memory that is cleared when allocating ata_ports.
Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Until now identifying that a device supports WRITE SAME(16) with the
UNMAP bit set has been black magic.  Implement support for the SBC-3
Thin Provisioning VPD page and set the TPWS bit.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Now that libata provides proper cross-port EH exclusion.  The SIDPR
locking added by commit 213373cf (ata_piix: fix locking around SIDPR
access) is no longer necessary.  Remove it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

In libata, the non-EH code paths should always take and release
ap->lock explicitly when accessing hardware or shared data structures.
However, once EH is active, it's assumed that the port is owned by EH
and EH methods don't explicitly take ap->lock unless race from irq
handler or other code paths are expected.  However, libata EH didn't
guarantee exclusion among EHs for ports of the same host.  IOW,
multiple EHs may execute in parallel on multiple ports of the same
controller.

In many cases, especially in SATA, the ports are completely
independent of each other and this doesn't cause problems; however,
there are cases where different ports share the same resource, which
lead to obscure timing related bugs such as the one fixed by commit
213373cf (ata_piix: fix locking around SIDPR access).

This patch implements exclusion among EHs of the same host.  When EH
begins, it acquires per-host EH ownership by calling ata_eh_acquire().
When EH finishes, the ownership is released by calling
ata_eh_release().  EH ownership is also released whenever the EH
thread goes to sleep from ata_msleep() or explicitly and reacquired
after waking up.

This ensures that while EH is actively accessing the hardware, it has
exclusive access to it while allowing EHs to interleave and progress
in parallel as they hit waiting stages, which dominate the time spent
in EH.  This achieves cross-port EH exclusion without pervasive and
fragile changes while still allowing parallel EH for the most part.

This was first reported by yuanding02@gmail.com more than three years
ago in the following bugzilla.  :-)

  https://bugzilla.kernel.org/show_bug.cgi?id=8223Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Reported-by: yuanding02@gmail.com
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

Add optional @ap argument to ata_wait_register() and replace msleep()
calls with ata_msleep() which take optional @ap in addition to the
duration.  These will be used to implement EH exclusion.

This patch doesn't cause any behavior difference.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>