- 03 May, 2011 24 commits
-
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Vasanthakumar Thiagarajan authored
Signed-off-by:
-
Greg Dietsche authored
fixed a few minor coding style issues reported by checkpatch.pl Signed-off-by:
Greg Dietsche <gregory.dietsche@cuw.edu> Signed-off-by:
-
Javier M. Mellid authored
Sync code comments with TODO, fix some style and format issues Signed-off-by:
Javier M. Mellid <jmunhoz@igalia.com> Signed-off-by:
-
Javier M. Mellid authored
The sm7xx driver uses the legacy PCI power management (suspend and resume) callbacks. This patch adds the new PCI PM and let the PCI core code handles the PCI-specific details of power transitions. Tested in 2.6.38, including standby and hibernation support. Tested-by:
Wu Zhangjin <wuzhangjin@gmail.com> Signed-off-by:
-
Naveen Singh authored
If the wpa_supplicant conf file supplies both open and shared algorithm, and AP is configured as shared then connection never happens. Since it is a FMAC driver additional logic is added in driver which first detects this, then tries open algorithm for the first time and when it fails tries the shared algo. kvalo: fix style issues Signed-off-by:
Naveen Singh <nsingh@atheros.com> Signed-off-by:
Kalle Valo <kalle.valo@atheros.com> Signed-off-by:
-
Naveen Singh authored
If a heavy traffic is undergoing and a link is lost (bcn miss), wlan driver does a reconnection on its own and after connection is re-established, reports it as ROAM_EVENT to cfg. Now this event is handled as work queue. It could very well happen that by the time this event gets handled, cfg would have aged out the bss and we get the following WARN_ON in __cfg80211_roamed function in file net/wireless/sme.c. /* internal error -- how did we get to CONNECTED w/o BSS? */ if (WARN_ON(!wdev->current_bss)) { return; } To resolve the issue we report the BSS whenever we send a connect or roam event to the cfg. kvalo: fix style issues Signed-off-by: -
Marek Belisko authored
Removed beacuse was only assigned and never used. Signed-off-by:
Marek Belisko <marek.belisko@open-nandra.com> Signed-off-by:
-
Marek Belisko authored
Removed because was only assigned and never used. Signed-off-by:
-
Marek Belisko authored
Removed because was only assigned and never used. Signed-off-by:
-
Marek Belisko authored
Removed because was only assigned and not used on other places. Signed-off-by:
-
Marek Belisko authored
Signed-off-by:
-
Marek Belisko authored
Signed-off-by:
-
Michael Hennerich authored
If the part get's probed twice without hard reset in between, the power on default register read-back can't be met. This shouldn't cause the second probe to fail. So warn but don't exit. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Acked-by:
Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by:
-
Michael Hennerich authored
RATE and QUADRATURE_CORRECTION data is formatted as a twos complement number, and therefore must be handled as type signed short. TEMP result should be properly shifted. Dynamic Null Correction is a 10-bit signed number. Signed-off-by:
-
Michael Hennerich authored
Signed-off-by:
-
Michael Hennerich authored
Add missing parity bit generation. Failure to add the parity bit caused half of the register accesses to fail. Signed-off-by:
-
Michael Hennerich authored
Cleanup result extraction and update license notice, no functional changes. Signed-off-by:
-
Michael Hennerich authored
Don't issue the same message twice, use two transfers and group them together Signed-off-by:
-
Michael Hennerich authored
Add support for AD9837 and AD9838 DDS devices Update copyright and license notice Fix typo Signed-off-by:
-
Michael Hennerich authored
Add support for the AD5760/AD5780 High Resolution Voltage Output DACs Signed-off-by:
-
Jeff Chua authored
Driver r8712u is unable to handle ad-hoc mode. The issue is that when the driver first starts, there will not be an SSID for association. The fix is to always call the "select and join from scan" routine when in ad-hoc mode. Note: Ad-hoc mode worked intermittently before. If the driver had previously been associated, then things were OK. Signed-off-by:
Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@kernel.org> Signed-off-by:
-
- 26 Apr, 2011 16 commits
-
-
K. Y. Srinivasan authored
Now that we have gotten rid of all uses of the priv element in struct hv_driver, get rid of the priv pointer. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by:
Abhishek Kane <v-abkane@microsoft.com> Signed-off-by:
Hank Janssen <hjanssen@microsoft.com> Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for getting rid of the priv element from struct hv_driver, cleanup vmbus_match - the setting of the drv field in struct hv_device is not needed. Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for getting rid of the priv element from struct hv_driver, get rid of the references to the priv element of struct hv_driver in storvsc_drv.c. Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for getting rid of the priv element from struct hv_driver, get rid of the references to the priv element of struct hv_driver in network driver. Signed-off-by:
-
K. Y. Srinivasan authored
Staging: hv: Introduce a function to map a generic driver pointer to a pointer to struct netvsc_driver In preparation for getting rid of the priv element from struct hv_driver, introduce a function to map a generic driver pointer to a pointer to struct netvsc_driver. Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for getting rid of the priv element from struct hv_driver, get rid of the references to the priv element of struct hv_driver in hv_mouse.c Signed-off-by:
-
K. Y. Srinivasan authored
In preparation for getting rid of the priv element from struct hv_driver, get rid of the references to the priv element of struct hv_driver in blkvsc_drv.c and storvsc.c Signed-off-by:
-
K. Y. Srinivasan authored
Staging: hv: Introduce a function to map a generic driver pointer to a pointer to storvsc_driver_object In preparation for getting rid of the priv element from struct hv_driver, introduce a function that maps a generic struct driver pointer to struct storvsc_driver_object. Signed-off-by:
-
Kenji Toyama authored
Not all warnings/errors were silenced, some of them are related to simple printk() messages that imho should not be split across multiple lines (it makes it harder to grep for example), and some of them are related to long lines that are pretty much impossible to split without proper code refactoring. Resubmitting this patch because of conflicts. Signed-off-by:
Daniel Kenji Toyama <kenji.toyama@gmail.com> Signed-off-by:
-
Kenji Toyama authored
Now there's only 10 errors and 1 warning given by checkpatch.pl, and these are related initialization of statics. The only warning left can be safely ignored I believe. I'm resending this patch as the previous one was conflicting with the newer version updated by Aaro Koskinen. Signed-off-by:
-
Franky Lin authored
si/sb utility is removed from Broadcom fullmac driver. All unused files are removed. Signed-off-by:
Franky Lin <frankyl@broadcom.com> Signed-off-by:
-
Franky Lin authored
Remove siutils related functions and resources from dhd_sdio.c Signed-off-by:
-
Franky Lin authored
Add dhdsdio_chip_detach to replace si_detach for si/sb utils removal Signed-off-by:
-
Franky Lin authored
Move si_sdiod_drive_strength_init to dhd_sdio and rename to dhdsdio_sdiod_drive_strength_init for dhd_pmu.c removal Signed-off-by:
-
Franky Lin authored
Use dhdsdio_chip_disablecore and dhd_sdio_chip_resetcore to replace siutils functions used in dhdsdio_download_state Signed-off-by:
-
Kenji Toyama authored
All the warnings about styles have been removed. Signed-off-by:
-
