Pull m68k updates from Geert Uytterhoeven:

 - several Mac fixes

 - defconfig updates

 - minor cleanups and fixes

* tag 'm68k-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: tools: Replace zero-length array with flexible-array member
  m68k: Add missing __user annotation in get_user()
  m68k: mac: Avoid stuck ISM IOP interrupt on Quadra 900/950
  m68k: mac: Remove misleading comment
  m68k: mac: Don't call via_flush_cache() on Mac IIfx
  m68k: defconfig: Update defconfigs for v5.7-rc1
  m68k: amiga: config: Replace zero-length array with flexible-array member
  m68k: amiga: config: Mark expected switch fall-through

Pull x86 vdso updates from Ingo Molnar:
 "Clean up various aspects of the vDSO code, no change in functionality
  intended"

* tag 'x86-vdso-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/vdso/Makefile: Add vobjs32
  x86/vdso/vdso2c: Convert iterators to unsigned
  x86/vdso/vdso2c: Correct error messages on file open

Pull x86 platform updates from Ingo Molnar:
 "This tree cleans up various aspects of the UV platform support code,
  it removes unnecessary functions and cleans up the rest"

* tag 'x86-platform-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/apic/uv: Remove code for unused distributed GRU mode
  x86/platform/uv: Remove the unused _uv_cpu_blade_processor_id() macro
  x86/platform/uv: Unexport uv_apicid_hibits
  x86/platform/uv: Remove _uv_hub_info_check()
  x86/platform/uv: Simplify uv_send_IPI_one()
  x86/platform/uv: Mark uv_min_hub_revision_id static
  x86/platform/uv: Mark is_uv_hubless() static
  x86/platform/uv: Remove the UV*_HUB_IS_SUPPORTED macros
  x86/platform/uv: Unexport symbols only used by x2apic_uv_x.c
  x86/platform/uv: Unexport sn_coherency_id
  x86/platform/uv: Remove the uv_partition_coherence_id() macro
  x86/platform/uv: Mark uv_bios_call() and uv_bios_call_irqsave() static

Pull x86 FPU updates from Ingo Molnar:
 "Most of the changes here related to 'XSAVES supervisor state' support,
  which is a feature that allows kernel-only data to be automatically
  saved/restored by the FPU context switching code.

  CPU features that can be supported this way are Intel PT, 'PASID' and
  CET features"

* tag 'x86-fpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu/xstate: Restore supervisor states for signal return
  x86/fpu/xstate: Preserve supervisor states for the slow path in __fpu__restore_sig()
  x86/fpu: Introduce copy_supervisor_to_kernel()
  x86/fpu/xstate: Update copy_kernel_to_xregs_err() for supervisor states
  x86/fpu/xstate: Update sanitize_restored_xstate() for supervisor xstates
  x86/fpu/xstate: Define new functions for clearing fpregs and xstates
  x86/fpu/xstate: Introduce XSAVES supervisor states
  x86/fpu/xstate: Separate user and supervisor xfeatures mask
  x86/fpu/xstate: Define new macros for supervisor and user xstates
  x86/fpu/xstate: Rename validate_xstate_header() to validate_user_xstate_header()

Pull x86 cpu updates from Ingo Molnar:
 "Misc updates:

   - Extend the x86 family/model macros with a steppings dimension,
     because x86 life isn't complex enough and Intel uses steppings to
     differentiate between different CPUs. :-/

   - Convert the TSC deadline timer quirks to the steppings macros.

   - Clean up asm mnemonics.

   - Fix the handling of an AMD erratum, or in other words, fix a kernel
     erratum"

* tag 'x86-cpu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Use RDRAND and RDSEED mnemonics in archrandom.h
  x86/cpu: Use INVPCID mnemonic in invpcid.h
  x86/cpu/amd: Make erratum #1054 a legacy erratum
  x86/apic: Convert the TSC deadline timer matching to steppings macro
  x86/cpu: Add a X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS() macro
  x86/cpu: Add a steppings field to struct x86_cpu_id

Pull x86 cleanups from Ingo Molnar:
 "Misc cleanups, with an emphasis on removing obsolete/dead code"

* tag 'x86-cleanups-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/spinlock: Remove obsolete ticket spinlock macros and types
  x86/mm: Drop deprecated DISCONTIGMEM support for 32-bit
  x86/apb_timer: Drop unused declaration and macro
  x86/apb_timer: Drop unused TSC calibration
  x86/io_apic: Remove unused function mp_init_irq_at_boot()
  x86/mm: Stop printing BRK addresses
  x86/audit: Fix a -Wmissing-prototypes warning for ia32_classify_syscall()
  x86/nmi: Remove edac.h include leftover
  mm: Remove MPX leftovers
  x86/mm/mmap: Fix -Wmissing-prototypes warnings
  x86/early_printk: Remove unused includes
  crash_dump: Remove no longer used saved_max_pfn
  x86/smpboot: Remove the last ICPU() macro

Pull x86 build updates from Ingo Molnar:
 "Misc dependency fixes, plus a documentation update about memory
  protection keys support"

* tag 'x86-build-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Update config and kernel doc for MPK feature on AMD
  x86/boot: Discard .discard.unreachable for arch/x86/boot/compressed/vmlinux
  x86/boot/build: Add phony targets in arch/x86/boot/Makefile to PHONY
  x86/boot/build: Make 'make bzlilo' not depend on vmlinux or $(obj)/bzImage
  x86/boot/build: Add cpustr.h to targets and remove clean-files

Pull x86 boot updates from Ingo Molnar:
 "Misc updates:

   - Add the initrdmem= boot option to specify an initrd embedded in RAM
     (flash most likely)

   - Sanitize the CS value earlier during boot, which also fixes SEV-ES

   - Various fixes and smaller cleanups"

* tag 'x86-boot-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Correct relocation destination on old linkers
  x86/boot/compressed/64: Switch to __KERNEL_CS after GDT is loaded
  x86/boot: Fix -Wint-to-pointer-cast build warning
  x86/boot: Add kstrtoul() from lib/
  x86/tboot: Mark tboot static
  x86/setup: Add an initrdmem= option to specify initrd physical address

Pull SMP updates from Ingo Molnar:
 "Misc cleanups in the SMP hotplug and cross-call code"

* tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Remove __freeze_secondary_cpus()
  cpu/hotplug: Remove disable_nonboot_cpus()
  cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted"
  smp: Use smp_call_func_t in on_each_cpu()

Pull EFI updates from Ingo Molnar:
 "The EFI changes for this cycle are:

   - preliminary changes for RISC-V

   - Add support for setting the resolution on the EFI framebuffer

   - Simplify kernel image loading for arm64

   - Move .bss into .data via the linker script instead of relying on
     symbol annotations.

   - Get rid of __pure getters to access global variables

   - Clean up the config table matching arrays

   - Rename pr_efi/pr_efi_err to efi_info/efi_err, and use them
     consistently

   - Simplify and unify initrd loading

   - Parse the builtin command line on x86 (if provided)

   - Implement printk() support, including support for wide character
     strings

   - Simplify GDT handling in early mixed mode thunking code

   - Some other minor fixes and cleanups"

* tag 'efi-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (79 commits)
  efi/x86: Don't blow away existing initrd
  efi/x86: Drop the special GDT for the EFI thunk
  efi/libstub: Add missing prototype for PE/COFF entry point
  efi/efivars: Add missing kobject_put() in sysfs entry creation error path
  efi/libstub: Use pool allocation for the command line
  efi/libstub: Don't parse overlong command lines
  efi/libstub: Use snprintf with %ls to convert the command line
  efi/libstub: Get the exact UTF-8 length
  efi/libstub: Use %ls for filename
  efi/libstub: Add UTF-8 decoding to efi_puts
  efi/printf: Add support for wchar_t (UTF-16)
  efi/gop: Add an option to list out the available GOP modes
  efi/libstub: Add definitions for console input and events
  efi/libstub: Implement printk-style logging
  efi/printf: Turn vsprintf into vsnprintf
  efi/printf: Abort on invalid format
  efi/printf: Refactor code to consolidate padding and output
  efi/printf: Handle null string input
  efi/printf: Factor out integer argument retrieval
  efi/printf: Factor out width/precision parsing
  ...

Pull perf updates from Ingo Molnar:
 "Kernel side changes:

   - Add AMD Fam17h RAPL support

   - Introduce CAP_PERFMON to kernel and user space

   - Add Zhaoxin CPU support

   - Misc fixes and cleanups

  Tooling changes:

   - perf record:

     Introduce '--switch-output-event' to use arbitrary events to be
     setup and read from a side band thread and, when they take place a
     signal be sent to the main 'perf record' thread, reusing the core
     for '--switch-output' to take perf.data snapshots from the ring
     buffer used for '--overwrite', e.g.:

	# perf record --overwrite -e sched:* \
		      --switch-output-event syscalls:*connect* \
		      workload

     will take perf.data.YYYYMMDDHHMMSS snapshots up to around the
     connect syscalls.

     Add '--num-synthesize-threads' option to control degree of
     parallelism of the synthesize_mmap() code which is scanning
     /proc/PID/task/PID/maps and can be time consuming. This mimics
     pre-existing behaviour in 'perf top'.

   - perf bench:

     Add a multi-threaded synthesize benchmark and kallsyms parsing
     benchmark.

   - Intel PT support:

     Stitch LBR records from multiple samples to get deeper backtraces,
     there are caveats, see the csets for details.

     Allow using Intel PT to synthesize callchains for regular events.

     Add support for synthesizing branch stacks for regular events
     (cycles, instructions, etc) from Intel PT data.

  Misc changes:

   - Updated perf vendor events for power9 and Coresight.

   - Add flamegraph.py script via 'perf flamegraph'

   - Misc other changes, fixes and cleanups - see the Git log for details

  Also, since over the last couple of years perf tooling has matured and
  decoupled from the kernel perf changes to a large degree, going
  forward Arnaldo is going to send perf tooling changes via direct pull
  requests"

* tag 'perf-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (163 commits)
  perf/x86/rapl: Add AMD Fam17h RAPL support
  perf/x86/rapl: Make perf_probe_msr() more robust and flexible
  perf/x86/rapl: Flip logic on default events visibility
  perf/x86/rapl: Refactor to share the RAPL code between Intel and AMD CPUs
  perf/x86/rapl: Move RAPL support to common x86 code
  perf/core: Replace zero-length array with flexible-array
  perf/x86: Replace zero-length array with flexible-array
  perf/x86/intel: Add more available bits for OFFCORE_RESPONSE of Intel Tremont
  perf/x86/rapl: Add Ice Lake RAPL support
  perf flamegraph: Use /bin/bash for report and record scripts
  perf cs-etm: Move definition of 'traceid_list' global variable from header file
  libsymbols kallsyms: Move hex2u64 out of header
  libsymbols kallsyms: Parse using io api
  perf bench: Add kallsyms parsing
  perf: cs-etm: Update to build with latest opencsd version.
  perf symbol: Fix kernel symbol address display
  perf inject: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
  perf annotate: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
  perf trace: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
  perf script: Rename perf_evsel__*() operating on 'struct evsel *' to evsel__*()
  ...

Pull objtool updates from Ingo Molnar:
 "There are a lot of objtool changes in this cycle, all across the map:

   - Speed up objtool significantly, especially when there are large
     number of sections

   - Improve objtool's understanding of special instructions such as
     IRET, to reduce the number of annotations required

   - Implement 'noinstr' validation

   - Do baby steps for non-x86 objtool use

   - Simplify/fix retpoline decoding

   - Add vmlinux validation

   - Improve documentation

   - Fix various bugs and apply smaller cleanups"

* tag 'objtool-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  objtool: Enable compilation of objtool for all architectures
  objtool: Move struct objtool_file into arch-independent header
  objtool: Exit successfully when requesting help
  objtool: Add check_kcov_mode() to the uaccess safelist
  samples/ftrace: Fix asm function ELF annotations
  objtool: optimize add_dead_ends for split sections
  objtool: use gelf_getsymshndx to handle >64k sections
  objtool: Allow no-op CFI ops in alternatives
  x86/retpoline: Fix retpoline unwind
  x86: Change {JMP,CALL}_NOSPEC argument
  x86: Simplify retpoline declaration
  x86/speculation: Change FILL_RETURN_BUFFER to work with objtool
  objtool: Add support for intra-function calls
  objtool: Move the IRET hack into the arch decoder
  objtool: Remove INSN_STACK
  objtool: Make handle_insn_ops() unconditional
  objtool: Rework allocating stack_ops on decode
  objtool: UNWIND_HINT_RET_OFFSET should not check registers
  objtool: is_fentry_call() crashes if call has no destination
  x86,smap: Fix smap_{save,restore}() alternatives
  ...

Pull locking updates from Ingo Molnar:
 "The biggest change to core locking facilities in this cycle is the
  introduction of local_lock_t - this primitive comes from the -rt
  project and identifies CPU-local locking dependencies normally handled
  opaquely beind preempt_disable() or local_irq_save/disable() critical
  sections.

  The generated code on mainline kernels doesn't change as a result, but
  still there are benefits: improved debugging and better documentation
  of data structure accesses.

  The new local_lock_t primitives are introduced and then utilized in a
  couple of kernel subsystems. No change in functionality is intended.

  There's also other smaller changes and cleanups"

* tag 'locking-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  zram: Use local lock to protect per-CPU data
  zram: Allocate struct zcomp_strm as per-CPU memory
  connector/cn_proc: Protect send_msg() with a local lock
  squashfs: Make use of local lock in multi_cpu decompressor
  mm/swap: Use local_lock for protection
  radix-tree: Use local_lock for protection
  locking: Introduce local_lock()
  locking/lockdep: Replace zero-length array with flexible-array
  locking/rtmutex: Remove unused rt_mutex_cmpxchg_relaxed()

Pull RCU updates from Ingo Molnar:
 "The RCU updates for this cycle were:

   - RCU-tasks update, including addition of RCU Tasks Trace for BPF use
     and TASKS_RUDE_RCU

   - kfree_rcu() updates.

   - Remove scheduler locking restriction

   - RCU CPU stall warning updates.

   - Torture-test updates.

   - Miscellaneous fixes and other updates"

* tag 'core-rcu-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (103 commits)
  rcu: Allow for smp_call_function() running callbacks from idle
  rcu: Provide rcu_irq_exit_check_preempt()
  rcu: Abstract out rcu_irq_enter_check_tick() from rcu_nmi_enter()
  rcu: Provide __rcu_is_watching()
  rcu: Provide rcu_irq_exit_preempt()
  rcu: Make RCU IRQ enter/exit functions rely on in_nmi()
  rcu/tree: Mark the idle relevant functions noinstr
  x86: Replace ist_enter() with nmi_enter()
  x86/mce: Send #MC singal from task work
  x86/entry: Get rid of ist_begin/end_non_atomic()
  sched,rcu,tracing: Avoid tracing before in_nmi() is correct
  sh/ftrace: Move arch_ftrace_nmi_{enter,exit} into nmi exception
  lockdep: Always inline lockdep_{off,on}()
  hardirq/nmi: Allow nested nmi_enter()
  arm64: Prepare arch_nmi_enter() for recursion
  printk: Disallow instrumenting print_nmi_enter()
  printk: Prepare for nested printk_nmi_enter()
  rcutorture: Convert ULONG_CMP_LT() to time_before()
  torture: Add a --kasan argument
  torture: Save a few lines by using config_override_param initially
  ...

Pull kprobes updates from Ingo Molnar:
 "Various kprobes updates, mostly centered around cleaning up the
  no-instrumentation logic.

  Instead of the current per debug facility blacklist, use the more
  generic .noinstr.text approach, combined with a 'noinstr' marker for
  functions.

  Also add instrumentation_begin()/end() to better manage the exact
  place in entry code where instrumentation may be used.

  And add a kprobes blacklist for modules"

* tag 'core-kprobes-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  kprobes: Prevent probes in .noinstr.text section
  vmlinux.lds.h: Create section for protection against instrumentation
  samples/kprobes: Add __kprobes and NOKPROBE_SYMBOL() for handlers.
  kprobes: Support NOKPROBE_SYMBOL() in modules
  kprobes: Support __kprobes blacklist in modules
  kprobes: Lock kprobe_mutex while showing kprobe_blacklist

Pull x86 cache resource control updates from Borislav Petkov:
 "Add support for wider Memory Bandwidth Monitoring counters by querying
  their width from CPUID.

  As a prerequsite for that, streamline and unify the CPUID detection of
  the respective resource control attributes.

  By Reinette Chatre"

* tag 'x86_cache_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/resctrl: Support wider MBM counters
  x86/resctrl: Support CPUID enumeration of MBM counter width
  x86/resctrl: Maintain MBM counter width per resource
  x86/resctrl: Query LLC monitoring properties once during boot
  x86/resctrl: Remove unnecessary RMID checks
  x86/cpu: Move resctrl CPUID code to resctrl/
  x86/resctrl: Rename asm/resctrl_sched.h to asm/resctrl.h

Pull x86 microcode update from Borislav Petkov:
 "A single fix for late microcode loading to handle the correct return
  value from stop_machine(), from Mihai Carabas"

* tag 'x86_microcode_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode: Fix return value for microcode late loading

Pull EDAC updates from Borislav Petkov:

 - Fix i10nm_edac loading on some Ice Lake and Tremont/Jacobsville
   steppings due to the offset change of the bus number configuration
   register, by Qiuxu Zhuo.

 - The usual cleanups and fixes all over the place.

* tag 'edac_updates_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Remove redundant assignment to variable ret in hw_info_get()
  EDAC/skx: Use the mcmtr register to retrieve close_pg/bank_xor_enable
  EDAC/i10nm: Update driver to support different bus number config register offsets
  EDAC, {skx,i10nm}: Make some configurations CPU model specific
  EDAC/amd8131: Remove defined but not used bridge_str
  EDAC/thunderx: Make symbols static
  MAINTAINERS: Remove sifive_l2_cache.c from EDAC-SIFIVE pattern
  EDAC/xgene: Remove set but not used address local var
  EDAC/armada_xp: Fix some log messages

Pull printk updates from Petr Mladek:

 - Benjamin Herrenschmidt solved a problem with non-matched console
   aliases by first checking consoles defined on the command line. It is
   a more conservative approach than the previous attempts.

 - Benjamin also made sure that the console accessible via /dev/console
   always has CON_CONSDEV flag.

 - Andy Shevchenko added the %ptT modifier for printing struct time64_t.
   It extends the existing %ptR handling for struct rtc_time.

 - Bruno Meneguele fixed /dev/kmsg error value returned by unsupported
   SEEK_CUR.

 - Tetsuo Handa removed unused pr_cont_once().

... and a few small fixes.

* tag 'printk-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: Remove pr_cont_once()
  printk: handle blank console arguments passed in.
  kernel/printk: add kmsg SEEK_CUR handling
  printk: Fix a typo in comment "interator"->"iterator"
  usb: pulse8-cec: Switch to use %ptT
  ARM: bcm2835: Switch to use %ptT
  lib/vsprintf: Print time64_t in human readable format
  lib/vsprintf: update comment about simple_strto<foo>() functions
  printk: Correctly set CON_CONSDEV even when preferred console was not registered
  printk: Fix preferred console selection with multiple matches
  printk: Move console matching logic into a separate function
  printk: Convert a use of sprintf to snprintf in console_unlock

Pull fsverity updates from Eric Biggers:
 "Fix kerneldoc warnings and some coding style inconsistencies.

  This mirrors the similar cleanups being done in fs/crypto/"

* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fs-verity: remove unnecessary extern keywords
  fs-verity: fix all kerneldoc warnings

Pull fscrypt updates from Eric Biggers:

 - Add the IV_INO_LBLK_32 encryption policy flag which modifies the
   encryption to be optimized for eMMC inline encryption hardware.

 - Make the test_dummy_encryption mount option for ext4 and f2fs support
   v2 encryption policies.

 - Fix kerneldoc warnings and some coding style inconsistencies.

* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
  fscrypt: add support for IV_INO_LBLK_32 policies
  fscrypt: make test_dummy_encryption use v2 by default
  fscrypt: support test_dummy_encryption=v2
  fscrypt: add fscrypt_add_test_dummy_key()
  linux/parser.h: add include guards
  fscrypt: remove unnecessary extern keywords
  fscrypt: name all function parameters
  fscrypt: fix all kerneldoc warnings

Pull pstore updates from Kees Cook:
 "Fixes and new features for pstore.

  This is a pretty big set of changes (relative to past pstore pulls),
  but it has been in -next for a while. The biggest change here is the
  ability to support a block device as a pstore backend, which has been
  desired for a while. A lot of additional fixes and refactorings are
  also included, mostly in support of the new features.

   - refactor pstore locking for safer module unloading (Kees Cook)

   - remove orphaned records from pstorefs when backend unloaded (Kees
     Cook)

   - refactor dump_oops parameter into max_reason (Pavel Tatashin)

   - introduce pstore/zone for common code for contiguous storage
     (WeiXiong Liao)

   - introduce pstore/blk for block device backend (WeiXiong Liao)

   - introduce mtd backend (WeiXiong Liao)"

* tag 'pstore-v5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (35 commits)
  mtd: Support kmsg dumper based on pstore/blk
  pstore/blk: Introduce "best_effort" mode
  pstore/blk: Support non-block storage devices
  pstore/blk: Provide way to query pstore configuration
  pstore/zone: Provide way to skip "broken" zone for MTD devices
  Documentation: Add details for pstore/blk
  pstore/zone,blk: Add ftrace frontend support
  pstore/zone,blk: Add console frontend support
  pstore/zone,blk: Add support for pmsg frontend
  pstore/blk: Introduce backend for block devices
  pstore/zone: Introduce common layer to manage storage zones
  ramoops: Add "max-reason" optional field to ramoops DT node
  pstore/ram: Introduce max_reason and convert dump_oops
  pstore/platform: Pass max_reason to kmesg dump
  printk: Introduce kmsg_dump_reason_str()
  printk: honor the max_reason field in kmsg_dumper
  printk: Collapse shutdown types into a single dump reason
  pstore/ftrace: Provide ftrace log merging routine
  pstore/ram: Refactor ftrace buffer merging
  pstore/ram: Refactor DT size parsing
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Introduce crypto_shash_tfm_digest() and use it wherever possible.
   - Fix use-after-free and race in crypto_spawn_alg.
   - Add support for parallel and batch requests to crypto_engine.

  Algorithms:
   - Update jitter RNG for SP800-90B compliance.
   - Always use jitter RNG as seed in drbg.

  Drivers:
   - Add Arm CryptoCell driver cctrng.
   - Add support for SEV-ES to the PSP driver in ccp"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (114 commits)
  crypto: hisilicon - fix driver compatibility issue with different versions of devices
  crypto: engine - do not requeue in case of fatal error
  crypto: cavium/nitrox - Fix a typo in a comment
  crypto: hisilicon/qm - change debugfs file name from qm_regs to regs
  crypto: hisilicon/qm - add DebugFS for xQC and xQE dump
  crypto: hisilicon/zip - add debugfs for Hisilicon ZIP
  crypto: hisilicon/hpre - add debugfs for Hisilicon HPRE
  crypto: hisilicon/sec2 - add debugfs for Hisilicon SEC
  crypto: hisilicon/qm - add debugfs to the QM state machine
  crypto: hisilicon/qm - add debugfs for QM
  crypto: stm32/crc32 - protect from concurrent accesses
  crypto: stm32/crc32 - don't sleep in runtime pm
  crypto: stm32/crc32 - fix multi-instance
  crypto: stm32/crc32 - fix run-time self test issue.
  crypto: stm32/crc32 - fix ext4 chksum BUG_ON()
  crypto: hisilicon/zip - Use temporary sqe when doing work
  crypto: hisilicon - add device error report through abnormal irq
  crypto: hisilicon - remove codes of directly report device errors through MSI
  crypto: hisilicon - QM memory management optimization
  crypto: hisilicon - unify initial value assignment into QM
  ...

Pull i3c update from Boris Brezillon:
 "Fix GETMRL's logic"

* tag 'i3c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c master: GETMRL's 3rd byte is optional even with BCR_IBI_PAYLOAD

Pull regulator updates from Mark Brown:
 "The big change in this release is that Matti Vaittinen has factored
  out the linear ranges support into a separate library in lib/ since it
  is also useful for at least the power subsystem (and most likely
  others too), it helps subsystems which need to map register values
  into more useful real world values do so with minimal per-driver code.

   - Factoring out of the linear ranges support into a library in lib/
     from Matti Vaittinen.

   - Trace points for bypass mode.

   - Use the consumer name in debugfs to make it easier to understand.

   - New drivers for Maxim MAX77826 and MAX8998"

* tag 'regulator-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (23 commits)
  regulator: max8998: max8998_set_current_limit() can be static
  dt-bindings: regulator: Convert anatop regulator to json-schema
  regulator: core: Add regulator bypass trace points
  regulator: extract voltage balancing code to the separate function
  regulator/mfd: max8998: Document charger regulator
  regulator: max8998: Add charger regulator
  MAINTAINERS: Add maintainer entry for linear ranges helper
  regulator: bd718x7: remove voltage change restriction from BD71847 LDOs
  lib: linear_ranges: Add missing MODULE_LICENSE()
  regulator: use linear_ranges helper
  power: supply: bd70528: rename linear_range to avoid collision
  lib/test_linear_ranges: add a test for the 'linear_ranges'
  lib: add linear ranges helpers
  regulator: db8500-prcmu: Use true,false for bool variable
  regulator: bd718x7: remove voltage change restriction from BD71847
  regulator: max77826: Remove erroneous additionalProperties
  regulator: qcom-rpmh: Fix typos in pm8150 and pm8150l
  regulator: Document bindings for max77826
  regulator: max77826: Add max77826 regulator driver
  regulator: tps80031: remove redundant assignment to variables ret and val
  ...

Pull spi updates from Mark Brown:
 "This has been a very active release for the DesignWare driver in
  particular - after a long period of inactivity we have had a lot of
  people actively working on it for unrelated reasons this cycle with
  some of that work still not landed.

  Otherwise it's been fairly quiet for the subsystem.

  Highlights include:

   - Lots of performance improvements and fixes for the DesignWare
     driver from Serge Semin, Andy Shevchenko, Wan Ahmad Zainie, Clement
     Leger, Dinh Nguyen and Jarkko Nikula.

   - Support for octal mode transfers in spidev.

   - Slave mode support for the Rockchip drivers.

   - Support for AMD controllers, Broadcom mspi and Raspberry Pi 4, and
     Intel Elkhart Lake"

* tag 'spi-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (125 commits)
  spi: spi-fsl-dspi: fix native data copy
  spi: Convert DW SPI binding to DT schema
  spi: dw: Refactor mid_spi_dma_setup() to separate DMA and IRQ config
  spi: dw: Make DMA request line assignments explicit for Intel Medfield
  spi: bcm2835: Remove shared interrupt support
  dt-bindings: snps,dw-apb-ssi: add optional reset property
  spi: dw: add reset control
  spi: bcm2835: Enable shared interrupt support
  spi: bcm2835: Implement shutdown callback
  spi: dw: Use regset32 DebugFS method to create regdump file
  spi: dw: Add DMA support to the DW SPI MMIO driver
  spi: dw: Cleanup generic DW DMA code namings
  spi: dw: Add DW SPI DMA/PCI/MMIO dependency on the DW SPI core
  spi: dw: Remove DW DMA code dependency from DW_DMAC_PCI
  spi: dw: Move Non-DMA code to the DW PCIe-SPI driver
  spi: dw: Add core suffix to the DW APB SSI core source file
  spi: dw: Fix Rx-only DMA transfers
  spi: dw: Use DMA max burst to set the request thresholds
  spi: dw: Parameterize the DMA Rx/Tx burst length
  spi: dw: Add SPI Rx-done wait method to DMA-based transfer
  ...

Pull regmap updates from Mark Brown:
 "This has been a very active release for the regmap API for some
  reason, a lot of it due to new devices with odd requirements that can
  sensibly be handled here.

   - Add support for buses implementing a custom reg_update_bits()
     method in case the bus has a native operation for this.

   - Support 16 bit register addresses in SMBus.

   - Allow customization of the device attached to regmap-irq.

   - Helpers for bitfield operations and per-port field initializations"

* tag 'regmap-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: provide helpers for simple bit operations
  regmap: add helper for per-port regfield initialization
  regmap-i2c: add 16-bit width registers support
  regmap: Simplify implementation of the regmap_field_read_poll_timeout() macro
  regmap: Simplify implementation of the regmap_read_poll_timeout() macro
  regmap: add reg_sequence helpers
  regmap-irq: make it possible to add irq_chip do a specific device node
  regmap: Add bus reg_update_bits() support
  regmap: debugfs: check count when read regmap file

Pull hwmon updates from Guenter Roeck:
 "Infrastructure:
   - Add notification support

  New drivers:
   - Baikal-T1 PVT sensor driver
   - amd_energy driver to report energy counters
   - Driver for Maxim MAX16601
   - Gateworks System Controller

  Various:
   - applesmc: avoid overlong udelay()
   - dell-smm: Use one DMI match for all XPS models
   - ina2xx: Implement alert functions
   - lm70: Add support for ACPI
   - lm75: Fix coding-style warnings
   - lm90: Add max6654 support to lm90 driver
   - nct7802: Replace container_of() API
   - nct7904: Set default timeout
   - nct7904: Add watchdog function
   - pmbus: Improve initialization of 'currpage' and 'currphase'"

* tag 'hwmon-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (24 commits)
  hwmon: Add Baikal-T1 PVT sensor driver
  hwmon: Add notification support
  dt-bindings: hwmon: Add Baikal-T1 PVT sensor binding
  hwmon: (applesmc) avoid overlong udelay()
  hwmon: (nct7904) Set default timeout
  hwmon: (amd_energy) Missing platform_driver_unregister() on error in amd_energy_init()
  MAINTAINERS: add entry for AMD energy driver
  hwmon: (amd_energy) Add documentation
  hwmon: Add amd_energy driver to report energy counters
  hwmon: (nct7802) Replace container_of() API
  hwmon: (lm90) Add max6654 support to lm90 driver
  hwmon : (nct6775) Use kobj_to_dev() API
  hwmon: (pmbus) Driver for Maxim MAX16601
  hwmon: (pmbus) Improve initialization of 'currpage' and 'currphase'
  hwmon: (adt7411) update contact email
  hwmon: (lm75) Fix all coding-style warnings on lm75 driver
  hwmon: Reduce indentation level in __hwmon_device_register()
  hwmon: (ina2xx) Implement alert functions
  hwmon: (lm70) Add support for ACPI
  hwmon: (dell-smm) Use one DMI match for all XPS models
  ...

Pull tpm updates from Jarkko Sakkinen.

* tag 'tpmdd-next-20200522' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: eventlog: Replace zero-length array with flexible-array member
  tpm/tpm_ftpm_tee: Use UUID API for exporting the UUID

Fixes: 4ffea5e0 ("regulator: max8998: Add charger regulator")
Signed-off-by: kbuild test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20200530130314.GA73557@d7d8dbfb64ffSigned-off-by: Mark Brown <broonie@kernel.org>

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Signed-off-by: Borislav Petkov <bp@suse.de>

This introduces mtdpstore, which is similar to mtdoops but more
powerful. It uses pstore/blk, and aims to store panic and oops logs to
a flash partition, where pstore can later read back and present as files
in the mounted pstore filesystem.

To make mtdpstore work, the "blkdev" of pstore/blk should be set
as MTD device name or MTD device number. For more details, see
Documentation/admin-guide/pstore-blk.rst

This solves a number of issues:
- Work duplication: both of pstore and mtdoops do the same job storing
  panic/oops log. They have very similar logic, registering to kmsg
  dumper and storing logs to several chunks one by one.
- Layer violations: drivers should provides methods instead of polices.
  MTD should provide read/write/erase operations, and allow a higher
  level drivers to provide the chunk management, kmsg dump
  configuration, etc.
- Missing features: pstore provides many additional features, including
  presenting the logs as files, logging dump time and count, and
  supporting other frontends like pmsg, console, etc.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-11-keescook@chromium.org/
Link: https://lore.kernel.org/r/1589266715-4168-1-git-send-email-liaoweixiong@allwinnertech.comSigned-off-by: Kees Cook <keescook@chromium.org>

In order to use arbitrary block devices as a pstore backend, provide a
new module param named "best_effort", which will allow using any block
device, even if it has not provided a panic_write callback.

Link: https://lore.kernel.org/lkml/20200511233229.27745-12-keescook@chromium.org/Signed-off-by: Kees Cook <keescook@chromium.org>

Add support for non-block devices (e.g. MTD). A non-block driver calls
pstore_blk_register_device() to register iself.

In addition, pstore/zone is updated to handle non-block devices,
where an erase must be done before a write. Without this, there is no
way to remove records stored to an MTD.
Signed-off-by: WeiXiong Liao <liaoweixiong@allwinnertech.com>
Link: https://lore.kernel.org/lkml/20200511233229.27745-10-keescook@chromium.org/Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>