- 23 May, 2014 7 commits
-
-
git://github.com/broadcom/mach-bcmArnd Bergmann authored
Merge "mach-bcm dt updates for 3.16" from Matt Porter: * Add PWM support to bcm281xx and bcm28155 ap board * Add gpldo and vbus regulators to bcm590xx * tag 'for-3.16/bcm-dt' of git://github.com/broadcom/mach-bcm: ARM: dts: bcm590xx: add support for GPLDO and VBUS regulators ARM: dts: Enable the PWM for bcm28155 AP board ARM: dts: Declare the PWM for bcm11351 (bcm281xx) Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Arnd Bergmann authored
Merge tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom into for-next Merge "Qualcomm ARM Based Device Tree Updates for v3.16" from Kumar Gala: * Added device tree nodes for pinctrl and SDHC for msm8974 SoC/DB8074 board * Added binding spec for GSBI configuration node * tag 'qcom-dt-for-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom: soc: qcom: Add device tree binding for GSBI ARM: dts: msm: Add SDHC controller nodes for MSM8974 and DB8074 board ARM: dts: MSM8974: Add pinctrl node Signed-off-by:
-
git://github.com/at91linux/linux-at91Arnd Bergmann authored
3.16 third DT series: - move of both at91sam9n12 and at91sam9x5 to CCF * tag 'at91-dt3' of git://github.com/at91linux/linux-at91: ARM: at91: move sam9n12 SoC to the CCF ARM: at91/dt: define sam9n12ek crystal frequencies ARM: at91/dt: define sam9n12 clocks ARM: at91: prepare common clk transition for sam9n12 SoC ARM: at91: move sam9x5 SoCs to the CCF ARM: at91/dt: define sam9x5ek's crystal frequencies ARM: at91/dt: define sam9x5 clocks ARM: at91: prepare common clk transition for sam9x5 SoCs dt-bindings: clock: Move at91.h to dt-bindigs/clock ARM: at91: fix spi cs on sama5d3 Xplained board Signed-off-by:
-
Arnd Bergmann authored
Conflicts: arch/arm/boot/dts/at91sam9rl.dtsi Needed as a dependency for the at91/dt2 branch Signed-off-by: -
git://git.stlinux.com/devel/kernel/linux-stiArnd Bergmann authored
Merge "ARM: STi: DT changes for v3.16, v3" from Maxime Coquelin: Please consider these STi DT updates for v3.16. This 3rd version takes into account Olof's comments on the v2: - Fix upper-cases in labels and node names - Sort compatibles order from specific to generic - Sort dts entries in Makefile It also adds support for the B2020 revision E board for STiH416 SoC. Note that two reset patches are part of this pull request, in order to avoid compilation breakage. Adding these two patches in this pull request has been accepted by Philipp Zabel. * tag 'sti-dt-for-v3.16-1' of git://git.stlinux.com/devel/kernel/linux-sti: (23 commits) ARM: sti: stih41x: Provide a proper header for this DTSI file ARM: sti: stih416: Enable board LED support for B2020 RevE ARM: sti: stih416: Add support for B2020 RevE ARM: STi: DT: STiH41x Add clk_ignore_unused to bootargs ARM: STi: DT: STiH415: 415 DT Entry for clockgen A9 ARM: STi: DT: STiH415: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks ARM: STi: DT: STiH415: Remove unused CLK_S_ICN_REG_0 fixed clock ARM: STi: DT: STiH415: 415 DT Entry for clockgen A0/1/10/11/12 ARM: STi: DT: STiH416: 416 DT Entry for clockgen A9/DDR/GPU ARM: STi: DT: STiH416: 416 DT Entry for clockgen B/C/D/E/F ARM: STi: DT: STiH416: Remove unused CLK_S_GMAC0_PHY & CLK_S_ETH1_PHY fixed clocks ARM: STi: DT: STiH416: Remove unused CLK_S_ICN_REG_0 fixed clock ARM: STi: DT: STiH416: 416 DT Entry for clockgen A0/1/10/11/12 ARM: STi: DT: STiH41x: Rename CLK_SYSIN into clk_sysin ARM: STi: DT: add keyscan for stih41x-b2000 ARM: STi: DT: add keyscan for stih416 ARM: STi: DT: add keyscan for stih415 driver: reset: sti: add keyscan for stih416 driver: reset: sti: add keyscan for stih415 ARM: dts: STiH407: Add B2120 board support ... Signed-off-by: -
Andy Gross authored
Add device tree binding support for the QCOM GSBI driver. Signed-off-by:
Andy Gross <agross@codeaurora.org> Signed-off-by:
Kumar Gala <galak@codeaurora.org>
-
Matt Porter authored
Adds additional nodes to support GPLDO1-6 and VBUS regulators which are now supported in the bcm590xx regulator driver. Signed-off-by:Matt Porter <mporter@linaro.org>
-
- 22 May, 2014 14 commits
-
-
Georgi Djakov authored
Add support for the 2 SDHC controllers on the DB8074 board. The first controller (at 0xf9824900) is connected to an on board soldered eMMC. The second controller (at 0xf98a4900) is connected to a uSD card slot. Signed-off-by:
Georgi Djakov <gdjakov@mm-sol.com> Signed-off-by:
-
Ivan T. Ivanov authored
Add the pin control node and pin definitions of SPI8. Signed-off-by:
Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Boris BREZILLON authored
This patch removes the selection of AT91_USE_OLD_CLK when selecting sam9n12 SoC support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by:
Boris BREZILLON <boris.brezillon@free-electrons.com> Tested-by:
Bo Shen <voice.shen@atmel.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com>
-
Boris BREZILLON authored
Define sam9n12ek's main and slow crystal frequencies. Signed-off-by:
-
Boris BREZILLON authored
Define sam9n12 clocks and make use of them in peripheral definitions. Signed-off-by:
-
Boris BREZILLON authored
This patch encloses sam9n12 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections. Signed-off-by:
-
Boris BREZILLON authored
This patch removes the selection of AT91_USE_OLD_CLK when selecting sam9x5 SoCs support. This will automatically enable COMMON_CLK_AT91 option and add support for at91 common clk implementation. Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Boris BREZILLON authored
Define sam9x5ek's main and slow crystal frequencies. Signed-off-by:
-
Boris BREZILLON authored
Define sam9x5 clocks in sam9x5 dt files and make use of them in peripheral definitions. Signed-off-by:
-
Boris BREZILLON authored
This patch encloses sam9x5 old clk registration in "#if defined(CONFIG_OLD_CLK_AT91) #endif" sections. Signed-off-by:
-
Nicolas Ferre authored
-
Nicolas Ferre authored
-
Olof Johansson authored
Merge tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/dt Samsung DT updates for v3.16 - exynos4 : add missing pinctrls - exynos4412-trats2 : update camera nodes and add rear camera nodes : rename alias for i2c_ak8975 label Update camera nodes for exynos4 and exynos4412-trats2 - exynos5250 : update DWC3 usb controller and enable to use generic USB DRD phy - exynos5250-snow : enable dp-controller, fimd, hdmi and pwm backlight : add sound node and Vbus regulator for USB 3.0 : add tps65090 power regulator : add pinctrl for EC irq and i2c-arbitrator - exynos5420 : change to correct compatible string for hdmi : add PD entry to MFC codec and enable DWC3 and USB 3.0 PHY : add MFC memory banks for smdk5420 and arndale-octa boards - exynos5420-peach-pit : add support exynos5420 based peach-pit board : add sound node and Vbus regulatro for USB 3.0 : enable dp-controller, fimd - exynos5420-smdk5420 : add Vbus regulatro for USB 3.0 - use generic DT bindings for map SYSRAM [olof: Fixed up conflict with a fix for 4212 secondary CPU startup, carrying over the fix to the reworked code] * tag 'samsung-dt' of http://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (32 commits) ARM: dts: Add MFC memory banks to exynos5420 boards ARM: dts: enable dp-controller for exynos5420-peach-pit board ARM: dts: enable fimd for exynos5420 based peach-pit board ARM: dts: enable dp-controller for exynos5250-snow board ARM: dts: enable fimd for exynos5250-snow board ARM: dts: enable pwm backlight for exynos5250-snow ARM: dts: Add pwmX_out pinctrl nodes to exynos5250 ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-smdk5420 ARM: dts: Add Vbus regulator for USB 3.0 on exynos5420-peach-pit ARM: dts: Add Vbus regulator for USB 3.0 on exynos5250-snow ARM: dts: Add PD entry to MFC codec on exynos5420 ARM: dts: Add sound node for exynos5420-peach-pit board ARM: dts: Add sound node for exynos5250-snow board ARM: dts: Update DWC3 usb controller to use new phy driver for exynos5250 ARM: dts: Enable support for generic USB DRD phy for exynos5250 ARM: dts: Enable support for DWC3 controller for exynos5420 ARM: dts: Enable support for USB 3.0 PHY controller for exynos5420 ARM: dts: enable hdmi for exynos5420-peach-pit board ARM: dts: change to correct compatible string for exynos5420 hdmi ARM: dts: enable hdmi for exynos5250 based snow board ... Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Olof Johansson authored
Merging in Samsung fixes for 3.15-rc to avoid an annoying context conflict with new DT code. * commit '702b691e': ARM: dts: Remove g2d_pd node for exynos5420 ARM: dts: Remove mau_pd node for exynos5420 ARM: exynos_defconfig: enable HS-I2C to fix for mmc partition mount ARM: dts: disable MDMA1 node for exynos5420 ARM: EXYNOS: fix the secondary CPU boot of exynos4212 Signed-off-by:
-
- 21 May, 2014 19 commits
-
-
Olof Johansson authored
Merge tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Merge "ARM: tegra: device tree changes for 3.16" from Stephen Warren: The bulk of Tegra changes for 3.16 are to device trees. Highlights are: - New board support for: - Jetson TK1. - SHIELD. - Tegra Note 7. - Colibri T30 module. - HDMI support on Venice2. - SD card write-protect GPIOs added to some boards. - Numerous regulator cleanups. * tag 'tegra-for-3.16-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: ARM: tegra: initial add of Colibri T30 ARM: tegra: add device tree for SHIELD ARM: tegra: add SD wp-gpios to Venice2 DT ARM: tegra: add Tegra Note 7 device tree ARM: tegra: add SD wp-gpios to Dalmore DT ARM: tegra: add SD wp-gpios to Jetson TK1 DT ARM: tegra: use correct audio CODEC on Jetson TK1 ARM: tegra: dalmore - Add DSI power supply ARM: tegra: dalmore - Add +5V HDMI supply ARM: tegra: beaver - Add +5V HDMI supply ARM: tegra: harmony - Add +5V HDMI supply ARM: tegra: jetson-tk1 - Enable HDMI support ARM: tegra: venice2 - Enable HDMI ARM: tegra: Add Tegra124 HDMI support ARM: tegra: fix Venice2 SD card VQMMC supply ARM: tegra: make Venice's +3.3V_RUN regulator always on ARM: tegra: fix Jetson TK1 SD card supply ARM: tegra: define Jetson TK1 regulators ARM: tegra: add Jetson TK1 device tree Signed-off-by:
-
Olof Johansson authored
Merge tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Merge "ARM: imx: device tree changes for 3.16" from Shawn Guo: i.MX device tree changes for 3.16: - New board support: imx35-pdk, imx51-digi-connectcore, imx6dl-phytec, imx6dl-riotboard, and vf610-colibri. - Improve device tree support for imx51-babbage and eukrea-cpuimx51 to get the same level support as board files, so that we can kill the board files. - Quite some updates on imx27-phytec-phycore board support from Alexander Shiyan - Enable USB, sound and touchscreen on the eukrea imx25/35/51 boards, from Denis Carikli - Quite a lot of patches from Fabio Estevam, updating Freescale imx25-pdk and imx27-pdk board support - Correct USB device configuration for imx25/35 - Fixes i2c4 device node in imx6dl.dtsi regarding to compatible string and clock data - Enable HDMI, TVE, LVDS display support on a bunch of imx5/6 boards - Update PCIe to the new binding and enable PCIe support on imx6qdl-sabresd board - A couple of imx6q-dmo-edmqmx6 updates from Lucas Stach, adding pfuze irq gpio and SPI flash - Enable CODA7541 VPU for i.MX53 - A series of updates on imx6qdl-phytec boards from Philipp Zabel - Small cleanups and fixes on board imx28-duckbill - Michael Heimpold - Add stdout-path property to i.MX boards - Karo TX25 board updates from Sascha Hauer - Enable pwm and sdhc devices for board vf610-twr * tag 'imx-dt-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (105 commits) ARM: dts: imx35-pdk: Fix memory region description ARM: dts: imx51-eukrea-mbimxsd51-baseboard: Add CAN support ARM: dts: imx6: add new board RIoTboard ARM: dts: imx6: i2c4 cleanup ARM: dts: imx6: edmqmx6: add vcc and vio power supplies to stmpe ARM: dts: Karo TX25: use hardware ecc ARM: dts: Karo TX25: Add phy reset gpio and supply for FEC ARM: dts: Karo TX25: Add pinctrl nodes ARM: dts: i.MX25: Add IRAM node ARM: dts: i.MX25: Add mmc aliases ARM: dts: i.MX51 babbage: Fix FEC pad ctrl settings ARM: dts: imx6qdl-sabresd: Add USDHC4 support ARM: imx: add HDMI support for SolidRun HummingBoard and Cubox-i ARM: dts: imx6: edmqmx6: add SPI bus and flash ARM: dts: imx6: edmqmx6: add pinctrl for pfuze irq gpio ARM: dts: imx6q-udoo: Add HDMI support ARM: dts: Add stdout-path property to i.MX boards ARM: dts: imx: Fix LVDS mapping for Ventana GW52xx ARM: dts: imx: add LVDS backlight for Ventana ARM: dts: imx6qdl-sabresd: remove power-on gpio from pcie ... Signed-off-by:
-
https://github.com/mripard/linuxOlof Johansson authored
Merge "Allwinner DT additions for 3.16" from Maxime Ripard: - Introduction of the MMC controlers - New board: A10s R7, Mele M9, APP4-EVB1 - Enabled the PMU on the Cortex A7-based SoCs * tag 'sunxi-dt-for-3.16' of https://github.com/mripard/linux: (38 commits) ARM: sunxi: dt: declare the r_pio pin controller for A31 SoC ARM: sunxi: dt: add PRCM clk and reset controller subdevices ARM: sunxi: dt: add APP4-EVB1 board support ARM: sun6i: dt: Add support for the USB controllers ARM: sun6i: Add the USB clocks to the DTSI ARM: dts: sun5i: Add new A10s r7 hdmi tv dongle board ARM: dts: sun7i: Add reg_vcc3v3 to sun7i board mmc nodes ARM: dts: sun6i: Add reg_vcc3v3 to sun6i board mmc nodes ARM: dts: sun5i: Add reg_vcc3v3 to sun5i board mmc nodes ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes ARM: dts: sunxi: Add reg_vcc3v3 supply to sunxi-common-regulators.dtsi ARM: dts: sun7i: Add basic support for the Cubietruck WiFi module ARM: dts: sun7i: Enable mmc controller on various A20 boards ARM: dts: sun7i: Add pin-muxing info for the mmc controllers ARM: dts: sun7i: Add mmc controller nodes ARM: dts: sun6i: Add new sun6i-a31-m9 dts file for Mele M9 ARM: dts: sun6i: Add mmc controller nodes ARM: dts: sun6i: Add mmc clocks ARM: dts: sun5i: Enable mmc controller on various A10s and A13 boards ARM: dts: sun5i: Add mmc controller nodes ... Signed-off-by:
-
Lee Jones authored
Just a trivial commenting fix. No functional changes. Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Maxime Coquelin <maxime.coquelin@st.com>
-
Lee Jones authored
There are two LEDs available on the B2020 RevE board, one red, one green. In this patch we enable the red one for "heartbeat" and turn the green one off. Signed-off-by:
-
Lee Jones authored
The B2020 RevE differs from the other B2020 boards in a few subtle ways; including the Ethernet reset GPIO which this patch adds support for and the LED wiring which will follow in a latter patch. Without supplying these differences Ethernet and the board LEDs simply will not work. Signed-off-by:
-
Gabriel FERNANDEZ authored
Interconnect clocks are not yet managed at the init, then we have to start the kernel with clk_ignore_unused. Signed-off-by:
Gabriel Fernandez <gabriel.fernandez@linaro.org> Signed-off-by:
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A9 Signed-off-by:
Pankaj Dev <pankaj.dev@st.com> Signed-off-by:
-
Gabriel FERNANDEZ authored
CLK_S_GMAC0_PHY & CLK_S_ETH1_PH clocks are no longer used. Signed-off-by:
-
Gabriel FERNANDEZ authored
CLK_S_ICN_REG_0 clock is no longer used. Signed-off-by:
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A0/1/10/11/12 Signed-off-by:
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A9/DDR/GPU Signed-off-by:
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen B/C/D/E/F Signed-off-by:
-
Gabriel FERNANDEZ authored
CLK_S_GMAC0_PHY & CLK_S_ETH1_PH clocks are no longer used. Signed-off-by:
-
Gabriel FERNANDEZ authored
CLK_S_ICN_REG_0 clock is no longer used. Signed-off-by:
-
Gabriel FERNANDEZ authored
Patch adds DT entries for clockgen A0/1/10/11/12 Signed-off-by:
-
Gabriel FERNANDEZ authored
all-caps node name is not very usual. Signed-off-by:
-
Gabriel FERNANDEZ authored
Add keyscan setup for stih415/h416 b2000. Both have same raw/column lines number, debounce time and keymap. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Giuseppe Condorelli <giuseppe.condorelli@st.com> Signed-off-by:
-
Gabriel FERNANDEZ authored
Add keyscan support for stih416. It is disabled by default given that it is not enabled on all boards. Also there are PIOs conflict with already claimed lines. Acked-by:
-
