- 15 Feb, 2017 2 commits
-
-
James Hogan authored
Recent versions of udev and systemd require the kernel to be compiled with CONFIG_DEVTMPFS in order to populate the /dev directory. Most MIPS platforms have it enabled by default, so enable it for the Cavium Octeon defconfig as well. This will assist with automated kernel boot testing. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Acked-by:
David Daney <david.daney@cavium.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15294/Signed-off-by:
-
Hauke Mehrtens authored
physical_memsize is needed by the vpe loader code and the platform specific code has to define it. This value will be given to the firmware loaded with the VPE loader. I am not aware of any standard interface or better value to provide here. Reported-by:
kbuild test robot <lkp@intel.com> Fixes: d9ae4f18 ("MIPS: Lantiq: Activate more drivers in default configuration") Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: John Crispin <john@phrozen.org> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/14908/Signed-off-by:
-
- 14 Feb, 2017 6 commits
-
-
Wei Yongjun authored
Remove duplicated include. Fixes: 7c0f6ba6 ("Replace <asm/uaccess.h> with <linux/uaccess.h> globally") Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Markus Elfring <elfring@users.sourceforge.net> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15213/Signed-off-by:
-
Marcin Nowakowski authored
Add a new command cpp_its_S introduced in commit cf2a5e0b ("MIPS: Support generating Flattened Image Trees (.itb)") to ksym_dep_filter handler - otherwise a warning is produced during the build of MIPS platforms (when vmlinux.*.itb target is chosen). Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: Michal Marek <mmarek@suse.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15278/Signed-off-by:
-
Paul Gortmaker authored
Historically a lot of these existed because we did not have a distinction between what was modular code and what was providing support to modules via EXPORT_SYMBOL and friends. That changed when we forked out support for the latter into the export.h file. This means we should be able to reduce the usage of module.h in code that is obj-y Makefile or bool Kconfig. In the case of some code where it is modular, we can extend that to also include files that are building basic support functionality but not related to loading or registering the final module; such files also have no need whatsoever for module.h The advantage in removing such instances is that module.h itself sources about 15 other headers; adding significantly to what we feed cpp, and it can obscure what headers we are effectively using. Since module.h might have been the implicit source for init.h (for __init) and for export.h (for EXPORT_SYMBOL) we consider each instance for the presence of either and replace/add as needed. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. Build coverage of all the mips defconfigs revealed the module.h header was masking a couple of implicit include instances, so we add the appropriate headers there. Signed-off-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Daney <david.daney@cavium.com> Cc: John Crispin <john@phrozen.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "Steven J. Hill" <steven.hill@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15131/ [james.hogan@imgtec.com: Preserve sort order where it already exists] Signed-off-by:
-
James Hogan authored
Unify definitions for MIPS performance counter register fields in mipsregs.h rather than duplicating them in perf_events and oprofile. This will allow future patches to use them to expose performance counters to KVM guests. Signed-off-by:
-
Joshua Kinard authored
Disable stack checking on MIPS kernels. Some distribution toolchains might pass the -fstack-check option to gcc. This results in a store-doubleword instruction being emitted at the top of all functions that checks the available stack space. E.g., a80000000001d740 <per_cpu_init>: a80000000001d740: ffa0bfc0 sd zero,-16448(sp) a80000000001d744: 2405ffc9 li a1,-55 a80000000001d748: 67bdffc0 daddiu sp,sp,-64 Generally, this is undesirable, and especially on the SGI IP27 platform, it will trigger a NULL pointer dereference in '_raw_spin_lock_irq' during early init. Signed-off-by:
Joshua Kinard <kumba@gentoo.org> Suggested-by:
-
Steven J. Hill authored
Add all the necessary platform code to initialize the dwc3 USB host controller. This code initializes the clocks and performs a reset on the USB core and PHYs. The driver code in 'drivers/usb/dwc3' is where the real driver lives. Signed-off-by:
Steven J. Hill <steven.hill@cavium.com> Acked-by:
-
- 13 Feb, 2017 7 commits
-
-
Felix Fietkau authored
With the IRQ stack changes integrated, the XRX200 devices started emitting a constant stream of kernel messages like this: [ 565.415310] Spurious IRQ: CAUSE=0x1100c300 This is caused by IP0 getting handled by plat_irq_dispatch() rather than its vectored interrupt handler, which is fixed by commit de856416e714 ("MIPS: IRQ Stack: Fix erroneous jal to plat_irq_dispatch"). Fix plat_irq_dispatch() to handle non-vectored IPI interrupts correctly by setting up IP2-6 as proper chained IRQ handlers and calling do_IRQ for all MIPS CPU interrupts. Signed-off-by:Felix Fietkau <nbd@nbd.name> Acked-by:
John Crispin <john@phrozen.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15077/ [james.hogan@imgtec.com: tweaked commit message] Signed-off-by:
-
Matt Redfearn authored
Since commit 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") the output of counter synchornisation has been split across lines: [ 0.665181] Synchronize counters for CPU 1: [ 0.678578] done. Fix this by using pr_cont, and replace printk with pr_info. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15195/Signed-off-by:
-
Matt Redfearn authored
Commit dda45f70 ("MIPS: Switch to the irq_stack in interrupts") changed both the normal and vectored interrupt handlers. Unfortunately the vectored version, "except_vec_vi_handler", was incorrectly modified to unconditionally jal to plat_irq_dispatch, rather than doing a jalr to the vectored handler that has been set up. This is ok for many platforms which set the vectored handler to plat_irq_dispatch anyway, but will cause problems with platforms that use other handlers. Fixes: dda45f70 ("MIPS: Switch to the irq_stack in interrupts") Signed-off-by:
-
Matt Redfearn authored
The postlink Makefile must include include/config/auto.conf to get the kernel configuration variables. But in a clean kernel directory this file does not exist, causing make to bail with the error: arch/mips/Makefile.postlink:10: include/config/auto.conf: No such file or directory make[1]: *** No rule to make target 'include/config/auto.conf'. Stop. Makefile:1290: recipe for target 'vmlinuxclean' failed Fix this by using "-include" to not cause a Make error when the file does not exist. Fixes: 44079d35 ("MIPS: Use Makefile.postlink to insert relocations into vmlinux") Signed-off-by:
-
James Hogan authored
The recently added MIPS cacheinfo support used a macro populate_cache() to populate the cacheinfo structures depending on which caches are present. However the macro contains multiple statements without enclosing them in a do {} while (0) loop, so the L2 and L3 cache conditionals in populate_cache_leaves() only conditionalised the first statement in the macro. This overflows the buffer allocated by detect_cache_attributes(), resulting in boot failures under QEMU where neither the L2 or L2 caches are present. Enclose the macro statements in a do {} while (0) block to keep the whole macro inside the conditionals. Fixes: ef462f3b ("MIPS: Add cacheinfo support") Reported-by:Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Paul Burton authored
When building for microMIPS we need to ensure that the assembler always knows that there is code at the target of a branch or jump. Commit 7170bdc7 ("MIPS: Add return errors to protected cache ops") introduced a fixup path to protected_cache(e)_op() which does not meet this requirement. The fixup path jumps to the "2" label but the .section pseudo-op immediately following it causes the label to be marked as data. Linking then fails with: mips-img-linux-gnu-ld: arch/mips/mm/c-r4k.o: .fixup+0x0: Unsupported jump between ISA modes; consider recompiling with interlinking enabled. Fix this by declaring that "2" labels code using the .insn directive. Fixes: 7170bdc7 ("MIPS: Add return errors to protected cache ops") Signed-off-by:
Paul Burton <paul.burton@imgtec.com> Signed-off-by:
Maciej W. Rozycki <macro@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Ralf Baechle <ralf@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/15274/Signed-off-by:
-
James Hogan authored
MIPS dependencies for KVM Miscellaneous MIPS architecture changes depended on by the MIPS KVM changes in the KVM tree. - Move pgd_alloc() out of header. - Exports so KVM can access page table management and TLBEX functions. - Add return errors to protected cache ops.
-
- 03 Feb, 2017 4 commits
-
-
James Hogan authored
The protected cache ops contain no out of line fixup code to return an error code in the event of a fault, with the cache op being skipped in that case. For KVM however we'd like to detect this case as page faulting will be disabled so it could happen during normal operation if the GVA page tables were flushed, and need to be handled by the caller. Add the out-of-line fixup code to load the error value -EFAULT into the return variable, and adapt the protected cache line functions to pass the error back to the caller. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org
-
James Hogan authored
Export to TLB exception code generating functions so that KVM can construct a fast TLB refill handler for guest context without reinventing the wheel quite so much. Signed-off-by:
-
James Hogan authored
Add include guards in asm/uasm.h to allow it to be safely used by a new header asm/tlbex.h in the next patch to expose TLB exception building functions for KVM to use. Signed-off-by:
-
James Hogan authored
Export pmd_init(), invalid_pmd_table and tlbmiss_handler_setup_pgd to GPL kernel modules so that MIPS KVM can use the inline page table management functions and switch between page tables: - pmd_init() will be used directly by KVM to initialise newly allocated pmd tables with invalid lower level table pointers. - invalid_pmd_table is used by pud_present(), pud_none(), and pud_clear(), which KVM will use to test and clear pud entries. - tlbmiss_handler_setup_pgd() will be called by KVM entry code to switch to the appropriate GVA page tables. Signed-off-by:
-
- 02 Feb, 2017 1 commit
-
-
James Hogan authored
pgd_alloc() references init_mm which is not exported to modules. In order for KVM to be able to use pgd_alloc() to allocate GVA page tables, move pgd_alloc() into a new pgtable.c file and export it to modules. Signed-off-by:
-
- 25 Jan, 2017 18 commits
-
-
Hauke Mehrtens authored
The DMA controller channel and port configuration is changed by selecting the port or channel in one register and then update the configuration in other registers. This has to be done in an atomic operation. Previously only the local interrupts were deactivated which works for single CPU systems. If the system supports SMP a better locking is needed, use spinlocks instead. On more recent SoCs (at least xrx200 and later) there are two memory regions to change the configuration, there we could use one area for each CPU and do not have to synchronize between the CPUs and more. Signed-off-by:
-
Arvind Yadav authored
Free memory mapping, if ath79_clocks_init_dt_ng is not successful. Signed-off-by:
Arvind Yadav <arvind.yadav.cs@gmail.com> Fixes: 3bdf1071 ("MIPS: ath79: update devicetree clock support for AR9132") Cc: antonynpavlov@gmail.com Cc: albeu@free.fr Cc: hackpascal@gmail.com Cc: sboyd@codeaurora.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/14915/Signed-off-by:
-
Matt Redfearn authored
Big endian CPUs require SWAP_IO_SPACE enabled to swap accesses to little endian peripherals. Without this patch, big endian kernels fail to communicate with little endian periperals, such as PCI devices, on QEMU and FPGA based platforms. Signed-off-by:
-
Dan Haab authored
So far only Luxul XWR-1750 router was supported. This adds a set of other Luxul devices based on BCM47XX. It's a standard support for LEDs and buttons. Signed-off-by:
Dan Haab <dhaab@luxul.com> Cc: Hauke Mehrtens <hauke@hauke-m.de> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/15106/Signed-off-by:
-
Markus Elfring authored
* Return an error code without storing it in an intermediate variable. * Delete the local variable "result" which became unnecessary with this refactoring. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Cc: LKML <linux-kernel@vger.kernel.org> Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15073/Signed-off-by:
-
Markus Elfring authored
A local variable was set to an error code in one case before a concrete error situation was detected. Thus move the corresponding assignment into an if branch to indicate a software failure there. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
* Return a failure indication without storing it in an intermediate variable. * Delete the local variable "error" which became unnecessary with this refactoring. Signed-off-by:
-
Arnd Bergmann authored
gcc warns about nonstandard declarations: arch/mips/sgi-ip32/ip32-irq.c:31:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip32/ip32-irq.c:36:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration] arch/mips/sgi-ip27/ip27-klnuma.c: In function 'replicate_kernel_text': arch/mips/sgi-ip27/ip27-klnuma.c:85:116: error: old-style function definition [-Werror=old-style-definition] Moving 'inline' before the return type, and adding argument types shuts up the warning here. This patch affects several platforms, but all in a trivial way. I'm fixing up all instances I found in any of the 'defconfig' builds. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/15050/Signed-off-by:
-
Arnd Bergmann authored
kernelci reports a failure of the ip28_defconfig build after upgrading its gcc version: arch/mips/sgi-ip22/Platform:29: *** gcc doesn't support needed option -mr10k-cache-barrier=store. Stop. The problem apparently is that the -mr10k-cache-barrier=store option is now rejected for CPUs other than r10k. Explicitly including the CPU in the check fixes this and is safe because both options were introduced in gcc-4.4. Signed-off-by:
-
Arnd Bergmann authored
gcc-6 reports a harmless build warning: arch/mips/cavium-octeon/dma-octeon.c: In function 'octeon_dma_alloc_coherent': arch/mips/cavium-octeon/dma-octeon.c:179:3: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] We can fix this by rearranging the code slightly using the IS_ENABLED() macro. Signed-off-by:
-
Arnd Bergmann authored
A new gcc warning shows up for this old code with gcc-6: arch/mips/loongson64/common/dma-swiotlb.c: In function 'loongson_dma_alloc_coherent': arch/mips/loongson64/common/dma-swiotlb.c:35:2: error: suggest braces around empty body in an 'else' statement [-Werror=empty-body] The code can be easily restructured to look more readable and avoid the warning at the same time. Signed-off-by:
-
Arnd Bergmann authored
All pointers to these functions were removed, so now they produce warnings: arch/mips/ralink/rt305x.c:92:13: error: 'rt305x_wdt_reset' defined but not used [-Werror=unused-function] This removes the functions. If we need them again, the patch can be reverted later. Fixes: f576fb6a ("MIPS: ralink: cleanup the soc specific pinmux data") Signed-off-by:
-
Arnd Bergmann authored
request_mem_region returns a NULL pointer on error, comparing it against a number results in a warning: arch/mips/ralink/of.c: In function 'plat_of_remap_node': arch/mips/ralink/of.c:45:15: error: ordered comparison of pointer with integer zero [-Werror=extra] arch/mips/ralink/irq.c: In function 'intc_of_init': arch/mips/ralink/irq.c:167:15: error: ordered comparison of pointer with integer zero [-Werror=extra] Signed-off-by:
-
Arnd Bergmann authored
The functions were originally used for the module unload path, but are not referenced any more and just cause warnings: arch/mips/ralink/timer.c:104:13: error: 'rt_timer_disable' defined but not used [-Werror=unused-function] arch/mips/ralink/timer.c:74:13: error: 'rt_timer_free' defined but not used [-Werror=unused-function] Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Fixes: 62ee73d2 ("MIPS: ralink: Make timer explicitly non-modular") Signed-off-by:
-
Arnd Bergmann authored
Hauke already fixed a couple of them, but one instance remains that checks for a negative integer when it should check for a NULL pointer: arch/mips/lantiq/xway/sysctrl.c: In function 'ltq_soc_init': arch/mips/lantiq/xway/sysctrl.c:473:19: error: ordered comparison of pointer with integer zero [-Werror=extra] Fixes: 6e807852 ("MIPS: Lantiq: Fix check for return value of request_mem_region()") Signed-off-by:
-
Arnd Bergmann authored
We get a harmless warning about a duplicate initalizer for the i2c board info structure: arch/mips/alchemy/board-gpr.c:239:11: error: initialized field overwritten [-Werror=override-init] As both initializers have the identical value, we can simply drop the second one. Signed-off-by:
-
Arnd Bergmann authored
A clean mips64 build produces no output except for two lines: Checking missing-syscalls for N32 Checking missing-syscalls for O32 On other architectures, there is no output at all, so let's do the same here for the sake of build testing. The 'kecho' macro is used to print the message on a normal build but skip it with 'make -s'. Fixes: e48ce6b8 ("[MIPS] Simplify missing-syscalls for N32 and O32") Signed-off-by:
-
Arnd Bergmann authored
vdso.h includes <spaces.h> implicitly after defining CONFIG_32BITS. This defeats the override in mach-ip27/spaces.h, leading to a build error that shows up in kernelci.org: In file included from arch/mips/include/asm/mach-ip27/spaces.h:29:0, from arch/mips/include/asm/page.h:12, from arch/mips/vdso/vdso.h:26, from arch/mips/vdso/gettimeofday.c:11: arch/mips/include/asm/mach-generic/spaces.h:28:0: error: "CAC_BASE" redefined [-Werror] #define CAC_BASE _AC(0x80000000, UL) An earlier patch tried to make the second definition conditional, but that patch had the #ifdef in the wrong place, and would lead to another warning: arch/mips/include/asm/io.h: In function 'phys_to_virt': arch/mips/include/asm/io.h:138:9: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] For all I can tell, there is no other reason than vdso32 to ever include this file with CONFIG_32BITS set, and the vdso itself should never refer to the base addresses as it is running in user space, so adding an #ifdef here is safe. Link: https://patchwork.kernel.org/patch/9418187/ Fixes: 3ffc17d8 ("MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0") Signed-off-by:
-
- 24 Jan, 2017 2 commits
-
-
Arnd Bergmann authored
kernelci.org reports tons of build warnings for linux-next: 35 WARNING: "memcpy" [fs/fat/msdos.ko] has no CRC! 35 WARNING: "__copy_user" [fs/fat/fat.ko] has no CRC! 32 WARNING: EXPORT symbol "memset" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "copy_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "clear_page" [vmlinux] version generation failed, symbol will not be versioned. 32 WARNING: EXPORT symbol "__strncpy_from_user_nocheck_asm" [vmlinux] version generation failed, symbol will not be versioned. The problem here is mainly the missing asm/asm-prototypes.h header file that is supposed to include the prototypes for each symbol that is exported from an assembler file. A second problem is that the asm/uaccess.h header contains some but not all the necessary declarations for the user access helpers. Finally, the vdso build is broken once we add asm/asm-prototypes.h, so we have to fix this at the same time by changing the vdso header. My approach here is to just not look for exported symbols in the VDSO assembler files, as the symbols cannot be exported anyway. Fixes: 576a2f0c ("MIPS: Export memcpy & memset functions alongside their definitions") Signed-off-by:
-
Arnd Bergmann authored
Since linux-4.3, SCSI_DH is a bool symbol, causing a warning in kernelci.org: arch/mips/configs/ip27_defconfig:136:warning: symbol value 'm' invalid for SCSI_DH This updates the defconfig to have the feature built-in. Fixes: 086b91d0 ("scsi_dh: integrate into the core SCSI code") Signed-off-by:
-
