mailmap entries may not use more than 2 email addresses per line.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The unused bytes of the features array should be zeroed, but the start index was one
byte too early. This caused the device features byte to be overwritten by 0.

The compliance test for the CEC_S_LOG_ADDRS ioctl didn't catch this because it tested
byte continuation with the second device features byte being 0 :-(
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

staging media drivers tend to have a build time dependency on the
media support. In particular, the newly added pulse8 cec driver can
only be a loadable module if MEDIA_SUPPORT=m, but its build dependency
is on a 'bool' symbol (MEDIA_CEC), so a randconfig build can fail
with pulse8_cec built-in:

drivers/staging/built-in.o: In function `pulse8_disconnect':
dgnc_utils.c:(.text+0x114): undefined reference to `cec_unregister_adapter'
drivers/staging/built-in.o: In function `pulse8_irq_work_handler':
dgnc_utils.c:(.text+0x1bc): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x1d8): undefined reference to `cec_received_msg'
dgnc_utils.c:(.text+0x1f4): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x218): undefined reference to `cec_transmit_done'
dgnc_utils.c:(.text+0x23c): undefined reference to `cec_transmit_done'
drivers/staging/built-in.o: In function `pulse8_connect':
dgnc_utils.c:(.text+0x844): undefined reference to `cec_allocate_adapter'
dgnc_utils.c:(.text+0x8a4): undefined reference to `cec_delete_adapter'
dgnc_utils.c:(.text+0xa10): undefined reference to `cec_register_adapter'

Originally, MEDIA_CEC itself was a tristate symbol, which would have
prevented this, but since 5bb2399a ("[media] cec: fix Kconfig
dependency problems"), it doesn't work like that any more.

This encloses all of the staging media drivers in a CONFIG_MEDIA_SUPPORT
dependency in Kconfig, which solves the problem by enforcing that none
of the drivers can be built-in if the media core is a module.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

vivid shouldn't process the CEC_MSG_SET_STREAM_PATH message: this will confuse
userspace follower code because it isn't aware of the state change of becoming
an active source.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Access to the interrupt page registers has been broken since at least
commit 3999e5d0 ("[media] adv7180: Do implicit register paging").
That commit forgot to add the interrupt page number to the register
defines.
Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Tested-by: Tim Harvey <tharvey@gateworks.com>
Acked-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

When allocating memory to hold the device dma parameters in
vb2_dma_contig_set_max_seg_size(), the requested size is by mistake only
the size of a pointer. Request the correct size instead.

Fixes: 3f033969 ("media: vb2-dma-contig: add helper for setting dma max seg size")
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The xfer_func, ycbcr_enc and quantization fields should also be copied from
output to capture format.

Since this driver serves as example code it is important that this is handled
correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

The adv7511 will automatically fill in the VIC code in the AVI InfoFrame
based on the timings of the incoming pixelport signals.

However, to have this work correctly it needs to specify the fps
value in a register. After doing this the proper VIC code is filled in.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Now that all media documentation was converted to Sphinx, we
should get rid of the old DocBook one, as we don't want people
to submit patches against the old stuff.
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

Pull media documentation updates from Mauro Carvalho Chehab:
 "This patch series does the conversion of all media documentation stuff
  to Restrutured Text markup format and add them to the
  Documentation/index.rst file.

  The media documentation was grouped into 4 books:

    - media uAPI
    - media kAPI
    - V4L driver-specific documentation
    - DVB driver-specific documentation

  It also contains several documentation improvements and one fixup
  patch for a core issue with cropcap.

  PS.  After this patch series, the media DocBook is deprecated and
  should be removed.  I'll add such patch on a future pull request"

* tag 'media/v4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (322 commits)
  [media] cx23885-cardlist.rst: add a new card
  [media] doc-rst: add some needed escape codes
  [media] doc-rst: kapi: use :c:func: instead of :cpp:func
  doc-rst: kernel-doc: fix a change introduced by mistake
  [media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
  [media] dvb_ringbuffer.h: some documentation improvements
  [media] v4l2-ctrls.h: fully document the header file
  [media] doc-rst: Fix some typedef ugly warnings
  [media] doc-rst: reorganize the kAPI v4l2 chapters
  [media] rename v4l2-framework.rst to v4l2-intro.rst
  [media] move V4L2 clocks to a separate .rst file
  [media] v4l2-fh.rst: add cross references and markups
  [media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
  [media] v4l2-fh.h: add documentation for it
  [media] v4l2-event.rst: add cross-references and markups
  [media] v4l2-event.h: document all functions
  [media] v4l2-event.rst: add text from v4l2-framework.rst
  [media] v4l2-framework.rst: remove videobuf quick chapter
  [media] v4l2-dev: add cross-references and improve markup
  [media] doc-rst: move v4l2-dev doc to a separate file
  ...

Pull SCSI updates from James Bottomley:
 "This update includes the usual round of driver updates (fcoe, lpfc,
  ufs, qla2xxx, hisi_sas).  The most important other change is removing
  the flag to allow non-blk_mq on a per host basis (it's unused); there
  is still a global module parameter for all of SCSI just in case.

  The rest are an assortment of minor fixes and typo updates"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (101 commits)
  scsi:libsas: fix oops caused by assigning a freed task to ->lldd_task
  fnic: pci_dma_mapping_error() doesn't return an error code
  scsi: lpfc: avoid harmless comparison warning
  fcoe: implement FIP VLAN responder
  fcoe: Rename 'fip_frame' to 'fip_vn2vn_notify_frame'
  lpfc: call lpfc_sli_validate_fcp_iocb() with the hbalock held
  scsi: ufs: remove unnecessary goto label
  hpsa: change hpsa_passthru_ioctl timeout
  hpsa: correct skipping masked peripherals
  qla2xxx: Update driver version to 8.07.00.38-k
  qla2xxx: Fix BBCR offset
  qla2xxx: Fix duplicate message id.
  qla2xxx: Disable the adapter and skip error recovery in case of register disconnect.
  qla2xxx: Separate ISP type bits out from device type.
  qla2xxx: Correction to function qla26xx_dport_diagnostics().
  qla2xxx: Add support to handle Loop Init error Asynchronus event.
  qla2xxx: Let DPORT be enabled purely by nvram.
  qla2xxx: Add bsg interface to support statistics counter reset.
  qla2xxx: Add bsg interface to support D_Port Diagnostics.
  qla2xxx: Check for device state before unloading the driver.
  ...

Pull input updates from Dmitry Torokhov:
 "Updates for the input subsystem.  This contains the following new
  drivers promised in the last merge window:

   - driver for touchscreen controller found in Surface 3
   - driver for Pegasus Notetaker tablet
   - driver for Atmel Captouch Buttons
   - driver for Raydium I2C touchscreen controllers
   - powerkey driver for HISI 65xx SoC

  plus a few fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (40 commits)
  Input: tty/vt/keyboard - use memdup_user()
  Input: pegasus_notetaker - set device mode in reset_resume() if in use
  Input: pegasus_notetaker - cancel workqueue's work in suspend()
  Input: pegasus_notetaker - fix usb_autopm calls to be balanced
  Input: pegasus_notetaker - handle usb control msg errors
  Input: wacom_w8001 - handle errors from input_mt_init_slots()
  Input: wacom_w8001 - resolution wasn't set for ABS_MT_POSITION_X/Y
  Input: pixcir_ts - add support for axis inversion / swapping
  Input: icn8318 - use of_touchscreen helpers for inverting / swapping axes
  Input: edt-ft5x06 - add support for inverting / swapping axes
  Input: of_touchscreen - add support for inverted / swapped axes
  Input: synaptics-rmi4 - use the RMI_F11_REL_BYTES define in rmi_f11_rel_pos_report
  Input: synaptics-rmi4 - remove unneeded variable
  Input: synaptics-rmi4 - remove pointer to rmi_function in f12_data
  Input: synaptics-rmi4 - support regulator supplies
  Input: raydium_i2c_ts - check CRC of incoming packets
  Input: xen-kbdfront - prefer xenbus_write() over xenbus_printf() where possible
  Input: fix a double word "is is" in include/linux/input.h
  Input: add powerkey driver for HISI 65xx SoC
  Input: apanel - spelling mistake - "skiping" -> "skipping"
  ...

Pull i2c updates from Wolfram Sang:
 "Here is the I2C pull request for 4.8:

   - the core and i801 driver gained support for SMBus Host Notify

   - core support for more than one address in DT

   - i2c_add_adapter() has now better error messages.  We can remove all
     error messages from drivers calling it as a next step.

   - bigger updates to rk3x driver to support rk3399 SoC

   - the at24 eeprom driver got refactored and can now read special
     variants with unique serials or fixed MAC addresses.

  The rest is regular driver updates and bugfixes"

* 'i2c/for-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (66 commits)
  i2c: i801: use IS_ENABLED() instead of checking for built-in or module
  Documentation: i2c: slave: give proper example for pm usage
  Documentation: i2c: slave: describe buffer problems a bit better
  i2c: bcm2835: Don't complain on -EPROBE_DEFER from getting our clock
  i2c: i2c-smbus: drop useless stubs
  i2c: efm32: fix a failure path in efm32_i2c_probe()
  Revert "i2c: core: Cleanup I2C ACPI namespace"
  Revert "i2c: core: Add function for finding the bus speed from ACPI"
  i2c: Update the description of I2C_SMBUS
  i2c: i2c-smbus: fix i2c_handle_smbus_host_notify documentation
  eeprom: at24: tweak the loop_until_timeout() macro
  eeprom: at24: add support for at24mac series
  eeprom: at24: support reading the serial number for 24csxx
  eeprom: at24: platform_data: use BIT() macro
  eeprom: at24: split at24_eeprom_write() into specialized functions
  eeprom: at24: split at24_eeprom_read() into specialized functions
  eeprom: at24: hide the read/write loop behind a macro
  eeprom: at24: call read/write functions via function pointers
  eeprom: at24: coding style fixes
  eeprom: at24: move at24_read() below at24_eeprom_write()
  ...

Pull spi updates from Mark Brown:
 "Quite a lot of cleanup and maintainence work going on this release in
  various drivers, and also a fix for a nasty locking issue in the core:

   - A fix for locking issues when external drivers explicitly locked
     the bus with spi_bus_lock() - we were using the same lock to both
     control access to the physical bus in multi-threaded I/O operations
     and exclude multiple callers.

     Confusion between these two caused us to have scenarios where we
     were dropping locks.  These are fixed by splitting into two
     separate locks like should have been done originally, making
     everything much clearer and correct.

   - Support for DMA in spi_flash_read().

   - Support for instantiating spidev on ACPI systems, including some
     test devices used in Windows validation.

   - Use of the core DMA mapping functionality in the McSPI driver.

   - Start of support for ThunderX SPI controllers, involving a very big
     set of changes to the Cavium driver.

   - Support for Braswell, Exynos 5433, Kaby Lake, Merrifield, RK3036,
     RK3228, RK3368 controllers"

* tag 'spi-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (64 commits)
  spi: Split bus and I/O locking
  spi: octeon: Split driver into Octeon specific and common parts
  spi: octeon: Move include file from arch/mips to drivers/spi
  spi: octeon: Put register offsets into a struct
  spi: octeon: Store system clock freqency in struct octeon_spi
  spi: octeon: Convert driver to use readq()/writeq() functions
  spi: pic32-sqi: fixup wait_for_completion_timeout return handling
  spi: pic32: fixup wait_for_completion_timeout return handling
  spi: rockchip: limit transfers to (64K - 1) bytes
  spi: xilinx: Return IRQ_NONE if no interrupts were detected
  spi: xilinx: Handle errors from platform_get_irq()
  spi: s3c64xx: restore removed comments
  spi: s3c64xx: add Exynos5433 compatible for ioclk handling
  spi: s3c64xx: use error code from clk_prepare_enable()
  spi: s3c64xx: rename goto labels to meaningful names
  spi: s3c64xx: document the clocks and the clock-name property
  spi: s3c64xx: add exynos5433 spi compatible
  spi: s3c64xx: fix reference leak to master in s3c64xx_spi_remove()
  spi: spi-sh: Remove deprecated create_singlethread_workqueue
  spi: spi-topcliff-pch: Remove deprecated create_singlethread_workqueue
  ...

Pull LED updates from Jacek Anaszewski:
 "New LED class driver:
   - LED driver for TI LP3952 6-Channel Color LED

  LED core improvements:
   - Only descend into leds directory when CONFIG_NEW_LEDS is set
   - Add no-op gpio_led_register_device when LED subsystem is disabled
   - MAINTAINERS: Add file patterns for led device tree bindings

  LED Trigger core improvements:
   - return error if invalid trigger name is provided via sysfs

  LED class drivers improvements
   - is31fl32xx: define complete i2c_device_id table
   - is31fl32xx: fix typo in id and match table names
   - leds-gpio: Set of_node for created LED devices
   - pca9532: Add device tree support

  Conversion of IDE trigger to common disk trigger:
   - leds: convert IDE trigger to common disk trigger
   - leds: documentation: 'ide-disk' to 'disk-activity'
   - unicore32: use the new LED disk activity trigger
   - parisc: use the new LED disk activity trigger
   - mips: use the new LED disk activity trigger
   - arm: use the new LED disk activity trigger
   - powerpc: use the new LED disk activity trigger"

* tag 'leds_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
  leds: is31fl32xx: define complete i2c_device_id table
  leds: is31fl32xx: fix typo in id and match table names
  leds: LED driver for TI LP3952 6-Channel Color LED
  leds: leds-gpio: Set of_node for created LED devices
  leds: triggers: return error if invalid trigger name is provided via sysfs
  leds: Only descend into leds directory when CONFIG_NEW_LEDS is set
  leds: Add no-op gpio_led_register_device when LED subsystem is disabled
  unicore32: use the new LED disk activity trigger
  parisc: use the new LED disk activity trigger
  mips: use the new LED disk activity trigger
  arm: use the new LED disk activity trigger
  powerpc: use the new LED disk activity trigger
  leds: documentation: 'ide-disk' to 'disk-activity'
  leds: convert IDE trigger to common disk trigger
  leds: pca9532: Add device tree support
  MAINTAINERS: Add file patterns for led device tree bindings

Pull IPMI updates from Corey Minyard:
 "Remove some old cruft that was disabled by default a long time ago.

  No modern hardware should need this, and anybody who really doesn't
  have something to automatically detect IPMI can add the device by hand
  on the module commandline or hot add it"

* tag 'for-linus-4.8' of git://git.code.sf.net/p/openipmi/linux-ipmi:
  ipmi: remove trydefaults parameter and default init

Pull EDAC updates from Borislav Petkov:
 "This last cycle, Thor was busy adding Arria10 eth FIFO support to the
  altera_edac driver along with other improvements.  We have two
  cleanups/fixes too.

  Summary:

   - Altera Arria10 ethernet FIFO buffer support (Thor Thayer)

   - Minor cleanups"

* tag 'edac_for_4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  ARM: dts: Add Arria10 Ethernet EDAC devicetree entry
  EDAC, altera: Add Arria10 Ethernet EDAC support
  EDAC, altera: Add Arria10 ECC memory init functions
  Documentation: dt: socfpga: Add Arria10 Ethernet binding
  EDAC, altera: Drop some ifdeffery
  EDAC, altera: Add panic flag check to A10 IRQ
  EDAC, altera: Check parent status for Arria10 EDAC block
  EDAC, altera: Make all private data structures static
  EDAC: Correct channel count limit
  EDAC, amd64_edac: Init opstate at the proper time during init
  EDAC, altera: Handle Arria10 SDRAM child node
  EDAC, altera: Add ECC Manager IRQ controller support
  Documentation: dt: socfpga: Add interrupt-controller to ecc-manager

Several build configurations had already disabled this warning because
it generates a lot of false positives.  But some had not, and it was
still enabled for "allmodconfig" builds, for example.

Looking at the warnings produced, every single one I looked at was a
false positive, and the warnings are frequent enough (and big enough)
that they can easily hide real problems that you don't notice in the
noise generated by -Wmaybe-uninitialized.

The warning is good in theory, but this is a classic case of a warning
that causes more problems than the warning can solve.

If gcc gets better at avoiding false positives, we may be able to
re-enable this warning.  But as is, we're better off without it, and I
want to be able to see the *real* warnings.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull networking updates from David Miller:

 1) Unified UDP encapsulation offload methods for drivers, from
    Alexander Duyck.

 2) Make DSA binding more sane, from Andrew Lunn.

 3) Support QCA9888 chips in ath10k, from Anilkumar Kolli.

 4) Several workqueue usage cleanups, from Bhaktipriya Shridhar.

 5) Add XDP (eXpress Data Path), essentially running BPF programs on RX
    packets as soon as the device sees them, with the option to mirror
    the packet on TX via the same interface.  From Brenden Blanco and
    others.

 6) Allow qdisc/class stats dumps to run lockless, from Eric Dumazet.

 7) Add VLAN support to b53 and bcm_sf2, from Florian Fainelli.

 8) Simplify netlink conntrack entry layout, from Florian Westphal.

 9) Add ipv4 forwarding support to mlxsw spectrum driver, from Ido
    Schimmel, Yotam Gigi, and Jiri Pirko.

10) Add SKB array infrastructure and convert tun and macvtap over to it.
    From Michael S Tsirkin and Jason Wang.

11) Support qdisc packet injection in pktgen, from John Fastabend.

12) Add neighbour monitoring framework to TIPC, from Jon Paul Maloy.

13) Add NV congestion control support to TCP, from Lawrence Brakmo.

14) Add GSO support to SCTP, from Marcelo Ricardo Leitner.

15) Allow GRO and RPS to function on macsec devices, from Paolo Abeni.

16) Support MPLS over IPV4, from Simon Horman.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1622 commits)
  xgene: Fix build warning with ACPI disabled.
  be2net: perform temperature query in adapter regardless of its interface state
  l2tp: Correctly return -EBADF from pppol2tp_getname.
  net/mlx5_core/health: Remove deprecated create_singlethread_workqueue
  net: ipmr/ip6mr: update lastuse on entry change
  macsec: ensure rx_sa is set when validation is disabled
  tipc: dump monitor attributes
  tipc: add a function to get the bearer name
  tipc: get monitor threshold for the cluster
  tipc: make cluster size threshold for monitoring configurable
  tipc: introduce constants for tipc address validation
  net: neigh: disallow transition to NUD_STALE if lladdr is unchanged in neigh_update()
  MAINTAINERS: xgene: Add driver and documentation path
  Documentation: dtb: xgene: Add MDIO node
  dtb: xgene: Add MDIO node
  drivers: net: xgene: ethtool: Use phy_ethtool_gset and sset
  drivers: net: xgene: Use exported functions
  drivers: net: xgene: Enable MDIO driver
  drivers: net: xgene: Add backward compatibility
  drivers: net: phy: xgene: Add MDIO driver
  ...

Pull xen updates from David Vrabel:
 "Features and fixes for 4.8-rc0:

   - ACPI support for guests on ARM platforms.
   - Generic steal time support for arm and x86.
   - Support cases where kernel cpu is not Xen VCPU number (e.g., if
     in-guest kexec is used).
   - Use the system workqueue instead of a custom workqueue in various
     places"

* tag 'for-linus-4.8-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (47 commits)
  xen: add static initialization of steal_clock op to xen_time_ops
  xen/pvhvm: run xen_vcpu_setup() for the boot CPU
  xen/evtchn: use xen_vcpu_id mapping
  xen/events: fifo: use xen_vcpu_id mapping
  xen/events: use xen_vcpu_id mapping in events_base
  x86/xen: use xen_vcpu_id mapping when pointing vcpu_info to shared_info
  x86/xen: use xen_vcpu_id mapping for HYPERVISOR_vcpu_op
  xen: introduce xen_vcpu_id mapping
  x86/acpi: store ACPI ids from MADT for future usage
  x86/xen: update cpuid.h from Xen-4.7
  xen/evtchn: add IOCTL_EVTCHN_RESTRICT
  xen-blkback: really don't leak mode property
  xen-blkback: constify instance of "struct attribute_group"
  xen-blkfront: prefer xenbus_scanf() over xenbus_gather()
  xen-blkback: prefer xenbus_scanf() over xenbus_gather()
  xen: support runqueue steal time on xen
  arm/xen: add support for vm_assist hypercall
  xen: update xen headers
  xen-pciback: drop superfluous variables
  xen-pciback: short-circuit read path used for merging write values
  ...

Pull arm64 updates from Catalin Marinas:

 - Kexec support for arm64

 - Kprobes support

 - Expose MIDR_EL1 and REVIDR_EL1 CPU identification registers to sysfs

 - Trapping of user space cache maintenance operations and emulation in
   the kernel (CPU errata workaround)

 - Clean-up of the early page tables creation (kernel linear mapping,
   EFI run-time maps) to avoid splitting larger blocks (e.g.  pmds) into
   smaller ones (e.g.  ptes)

 - VDSO support for CLOCK_MONOTONIC_RAW in clock_gettime()

 - ARCH_HAS_KCOV enabled for arm64

 - Optimise IP checksum helpers

 - SWIOTLB optimisation to only allocate/initialise the buffer if the
   available RAM is beyond the 32-bit mask

 - Properly handle the "nosmp" command line argument

 - Fix for the initialisation of the CPU debug state during early boot

 - vdso-offsets.h build dependency workaround

 - Build fix when RANDOMIZE_BASE is enabled with MODULES off

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (64 commits)
  arm64: arm: Fix-up the removal of the arm64 regs_query_register_name() prototype
  arm64: Only select ARM64_MODULE_PLTS if MODULES=y
  arm64: mm: run pgtable_page_ctor() on non-swapper translation table pages
  arm64: mm: make create_mapping_late() non-allocating
  arm64: Honor nosmp kernel command line option
  arm64: Fix incorrect per-cpu usage for boot CPU
  arm64: kprobes: Add KASAN instrumentation around stack accesses
  arm64: kprobes: Cleanup jprobe_return
  arm64: kprobes: Fix overflow when saving stack
  arm64: kprobes: WARN if attempting to step with PSTATE.D=1
  arm64: debug: remove unused local_dbg_{enable, disable} macros
  arm64: debug: remove redundant spsr manipulation
  arm64: debug: unmask PSTATE.D earlier
  arm64: localise Image objcopy flags
  arm64: ptrace: remove extra define for CPSR's E bit
  kprobes: Add arm64 case in kprobe example module
  arm64: Add kernel return probes support (kretprobes)
  arm64: Add trampoline code for kretprobes
  arm64: kprobes instruction simulation support
  arm64: Treat all entry code as non-kprobe-able
  ...

Pull tile architecture updates from Chris Metcalf:
 "A few stray changes"

* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  tile: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
  tile: support gcc 7 optimization to use __multi3
  tile 32-bit big-endian: fix bugs in syscall argument order
  tile: allow disabling CONFIG_EARLY_PRINTK

Pull dlm updates from David Teigland:
 "This set includes two trivial changes, one to use kmemdup and another
  to control the log level of recovery messages"

* tag 'dlm-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: Use kmemdup instead of kmalloc and memcpy
  dlm: add log_info config option

Pull f2fs updates from Jaegeuk Kim:
 "The major change in this version is mitigating cpu overheads on write
  paths by replacing redundant inode page updates with mark_inode_dirty
  calls.  And we tried to reduce lock contentions as well to improve
  filesystem scalability.  Other feature is setting F2FS automatically
  when detecting host-managed SMR.

  Enhancements:
   - ioctl to move a range of data between files
   - inject orphan inode errors
   - avoid flush commands congestion
   - support lazytime

  Bug fixes:
   - return proper results for some dentry operations
   - fix deadlock in add_link failure
   - disable extent_cache for fcollapse/finsert"

* tag 'for-f2fs-4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (68 commits)
  f2fs: clean up coding style and redundancy
  f2fs: get victim segment again after new cp
  f2fs: handle error case with f2fs_bug_on
  f2fs: avoid data race when deciding checkpoin in f2fs_sync_file
  f2fs: support an ioctl to move a range of data blocks
  f2fs: fix to report error number of f2fs_find_entry
  f2fs: avoid memory allocation failure due to a long length
  f2fs: reset default idle interval value
  f2fs: use blk_plug in all the possible paths
  f2fs: fix to avoid data update racing between GC and DIO
  f2fs: add maximum prefree segments
  f2fs: disable extent_cache for fcollapse/finsert inodes
  f2fs: refactor __exchange_data_block for speed up
  f2fs: fix ERR_PTR returned by bio
  f2fs: avoid mark_inode_dirty
  f2fs: move i_size_write in f2fs_write_end
  f2fs: fix to avoid redundant discard during fstrim
  f2fs: avoid mismatching block range for discard
  f2fs: fix incorrect f_bfree calculation in ->statfs
  f2fs: use percpu_rw_semaphore
  ...

Pull xfs updates from Dave Chinner:
 "The major addition is the new iomap based block mapping
  infrastructure.  We've been kicking this about locally for years, but
  there are other filesystems want to use it too (e.g. gfs2).  Now it
  is fully working, reviewed and ready for merge and be used by other
  filesystems.

  There are a lot of other fixes and cleanups in the tree, but those are
  XFS internal things and none are of the scale or visibility of the
  iomap changes.  See below for details.

  I am likely to send another pull request next week - we're just about
  ready to merge some new functionality (on disk block->owner reverse
  mapping infrastructure), but that's a huge chunk of code (74 files
  changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that
  separate to all the "normal" pull request changes so they don't get
  lost in the noise.

  Summary of changes in this update:
   - generic iomap based IO path infrastructure
   - generic iomap based fiemap implementation
   - xfs iomap based Io path implementation
   - buffer error handling fixes
   - tracking of in flight buffer IO for unmount serialisation
   - direct IO and DAX io path separation and simplification
   - shortform directory format definition changes for wider platform
     compatibility
   - various buffer cache fixes
   - cleanups in preparation for rmap merge
   - error injection cleanups and fixes
   - log item format buffer memory allocation restructuring to prevent
     rare OOM reclaim deadlocks
   - sparse inode chunks are now fully supported"

* tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits)
  xfs: remove EXPERIMENTAL tag from sparse inode feature
  xfs: bufferhead chains are invalid after end_page_writeback
  xfs: allocate log vector buffers outside CIL context lock
  libxfs: directory node splitting does not have an extra block
  xfs: remove dax code from object file when disabled
  xfs: skip dirty pages in ->releasepage()
  xfs: remove __arch_pack
  xfs: kill xfs_dir2_inou_t
  xfs: kill xfs_dir2_sf_off_t
  xfs: split direct I/O and DAX path
  xfs: direct calls in the direct I/O path
  xfs: stop using generic_file_read_iter for direct I/O
  xfs: split xfs_file_read_iter into buffered and direct I/O helpers
  xfs: remove s_maxbytes enforcement in xfs_file_read_iter
  xfs: kill ioflags
  xfs: don't pass ioflags around in the ioctl path
  xfs: track and serialize in-flight async buffers against unmount
  xfs: exclude never-released buffers from buftarg I/O accounting
  xfs: don't reset b_retries to 0 on every failure
  xfs: remove extraneous buffer flag changes
  ...

Parameter trydefaults=1 causes the ipmi_init to initialize ipmi through
the legacy port io space that was designated for ipmi. Architectures
that do not map legacy port io can panic when trydefaults=1.

Rather than implement build-time conditional exceptions for each
architecture that does not map legacy port io, we have removed legacy
port io from the driver.

Parameter 'trydefaults' has been removed. Attempts to use it hereafter
will evoke the "Unknown symbol in module, or unknown parameter" message.

The patch was built against a number of architectures and tested for
regressions and functionality on x86_64 and ARM64.
Signed-off-by: Tony Camuso <tcamuso@redhat.com>

Removed the config entry and the address source entry for default,
since neither were used any more.
Signed-off-by: Corey Minyard <cminyard@mvista.com>

* topic/docs-next: (322 commits)
  [media] cx23885-cardlist.rst: add a new card
  [media] doc-rst: add some needed escape codes
  [media] doc-rst: kapi: use :c:func: instead of :cpp:func
  doc-rst: kernel-doc: fix a change introduced by mistake
  [media] v4l2-ioctl.h add debug info for struct v4l2_ioctl_ops
  [media] dvb_ringbuffer.h: some documentation improvements
  [media] v4l2-ctrls.h: fully document the header file
  [media] doc-rst: Fix some typedef ugly warnings
  [media] doc-rst: reorganize the kAPI v4l2 chapters
  [media] rename v4l2-framework.rst to v4l2-intro.rst
  [media] move V4L2 clocks to a separate .rst file
  [media] v4l2-fh.rst: add cross references and markups
  [media] v4l2-fh.rst: add fh contents from v4l2-framework.rst
  [media] v4l2-fh.h: add documentation for it
  [media] v4l2-event.rst: add cross-references and markups
  [media] v4l2-event.h: document all functions
  [media] v4l2-event.rst: add text from v4l2-framework.rst
  [media] v4l2-framework.rst: remove videobuf quick chapter
  [media] v4l2-dev: add cross-references and improve markup
  [media] doc-rst: move v4l2-dev doc to a separate file
  ...

Commit 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API
feature") inadvertently removed the arch/arm prototype instead of the
arm64 one introduced by the original patch. There should not be any
bisection issues since this function is not called from anywhere else
(it could as well be removed from arch/arm at some point).

Fixes: 0a8ea52c ("arm64: Add HAVE_REGS_AND_STACK_ACCESS_API feature")
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

drivers/net/ethernet/apm/xgene/xgene_enet_hw.c: In function 'xgene_enet_phy_connect':
drivers/net/ethernet/apm/xgene/xgene_enet_hw.c:759:22: warning: unused variable 'adev' [-Wunused-variable]

Fixes: 8089a96f ("drivers: net: xgene: Add backward compatibility")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

The be2net driver performs fw temperature queries on be_worker() routine,
which is executed each second for each be_adapter. There is a frequency
threshold to avoid fw query to happens at each call to be_worker();
instead, currently a fw query occurs once in 64 runs of the procedure.

Nevertheless, this fw temperature query is invoked only for adapters which
interface is up, so we can see I/O errors on read of hwmon counters from
userspace (from tools like lm-sensors) in case we have adapters' functions
which interface is down.

This patch moves the fw query code to be invoked even if interface is down.
No functional changes were introduced.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Acked-by: Sathya Perla <sathya.perla@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge updates from Andrew Morton:

 - a few misc bits

 - ocfs2

 - most(?) of MM

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (125 commits)
  thp: fix comments of __pmd_trans_huge_lock()
  cgroup: remove unnecessary 0 check from css_from_id()
  cgroup: fix idr leak for the first cgroup root
  mm: memcontrol: fix documentation for compound parameter
  mm: memcontrol: remove BUG_ON in uncharge_list
  mm: fix build warnings in <linux/compaction.h>
  mm, thp: convert from optimistic swapin collapsing to conservative
  mm, thp: fix comment inconsistency for swapin readahead functions
  thp: update Documentation/{vm/transhuge,filesystems/proc}.txt
  shmem: split huge pages beyond i_size under memory pressure
  thp: introduce CONFIG_TRANSPARENT_HUGE_PAGECACHE
  khugepaged: add support of collapse for tmpfs/shmem pages
  shmem: make shmem_inode_info::lock irq-safe
  khugepaged: move up_read(mmap_sem) out of khugepaged_alloc_page()
  thp: extract khugepaged from mm/huge_memory.c
  shmem, thp: respect MADV_{NO,}HUGEPAGE for file mappings
  shmem: add huge pages support
  shmem: get_unmapped_area align huge page
  shmem: prepare huge= mount option and sysfs knob
  mm, rmap: account shmem thp pages
  ...

Pull power supply and reset updates from Sebastian Reichel:
 - introduce reboot mode driver
 - add DT support to max8903
 - add power supply support for axp221
 - misc fixes

* tag 'for-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: reset: add reboot mode driver
  dt-bindings: power: reset: add document for reboot-mode driver
  power_supply: fix return value of get_property
  power: qcom_smbb: Make an extcon for usb cable detection
  max8903: adds support for initiation via device tree
  max8903: adds documentation for device tree bindings.
  max8903: remove unnecessary 'out of memory' error message.
  max8903: removes non zero validity checks on gpios.
  max8903: adds requesting of gpios.
  max8903: cleans up confusing relationship between dc_valid, dok and dcm.
  max8903: store pointer to pdata instead of copying it.
  power_supply: bq27xxx_battery: Group register mappings into one table
  docs: Move brcm,bcm21664-resetmgr.txt
  power/reset: make syscon_poweroff() static
  power: axp20x_usb: Add support for usb power-supply on axp22x pmics
  power_supply: bq27xxx_battery: Index register numbers by enum
  power_supply: bq27xxx_battery: Fix copy/paste error in header comment
  MAINTAINERS: Add file patterns for power supply device tree bindings
  power: reset: keystone: Enable COMPILE_TEST

Pull regulator updates from Mark Brown:
 "A quiet regulator API release, a few new drivers and some fixes but
  nothing too notable.  There will also be some updates for the PWM
  regulator coming through the PWM tree which provide much smoother
  operation when taking over an already running PWM regulator after boot
  using some new PWM APIs.

  Summary:

   - Support for configuration of the initial suspend state from DT.

   - New drivers for Mediatek MT6323, Ricoh RN5T567 and X-Powers AXP809"

* tag 'regulator-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (38 commits)
  regulator: da9053/52: Fix incorrectly stated minimum and maximum voltage limits
  regulator: mt6323: Constify struct regulator_ops
  regulator: mt6323: Fix module description
  regulator: mt6323: Add support for MT6323 regulator
  regulator: Add document for MT6323 regulator
  regulator: da9210: addition of device tree support
  regulator: act8865: Fix missing of_node_put() in act8865_pdata_from_dt()
  regulator: qcom_smd: Avoid overlapping linear voltage ranges
  regulator: s2mps11: Fix the voltage linear range for s2mps15
  regulator: pwm: Fix regulator ramp delay for continuous mode
  regulator: da9211: add descriptions for da9212/da9214
  mfd: rn5t618: Register restart handler
  mfd: rn5t618: Register power off callback optionally
  regulator: rn5t618: Add RN5T567 PMIC support
  mfd: rn5t618: Add Ricoh RN5T567 PMIC support
  ARM: dts: meson: minix-neo-x8: define PMIC as power controller
  regulator: tps65218: force set power-up/down strobe to 3 for dcdc3
  regulator: tps65218: Enable suspend configuration
  regulator: tps65217: Enable suspend configuration
  regulator: qcom_spmi: Add support for get_mode/set_mode on switches
  ...

Pull regmap updates from Mark Brown:
 "Several small updates and API enhancements:

   - provide transparent unrolling of bulk writes into individual writes
     so they can be used with devices without raw formatting.

   - fix compatibility between I2C controllers supporting block commands
     and devices with more than 8 bit wide registers.

   - add some helpers for iopoll-like functionality and workarounds for
     weird interrupt controllers"

* tag 'regmap-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: add iopoll-like polling macro
  regmap: Support bulk writes for devices without raw formatting
  regmap-i2c: Use i2c block command only if register value width is 8 bit
  regmap: irq: Add support to call client specific pre/post interrupt service
  regmap: Add file patterns for regmap device tree bindings

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v4.8 kernel cycle.  The big
  news is the completion of the chardev ABI which I'm very happy about
  and apart from that it's an ordinary, quite busy cycle.  The details
  are below.

  The patches are tested in linux-next for some time, patches to other
  subsystem mostly have ACKs.

  I got overly ambitious with configureing lines as input for IRQ lines
  but it turns out that some controllers have their interrupt-enable and
  input-enabling in orthogonal settings so the assumption that all IRQ
  lines are input lines does not hold.  Oh well, revert and back to the
  drawing board with that.

  Core changes:

   - The big item is of course the completion of the character device
     ABI.  It has now replaced and surpassed the former unmaintainable
     sysfs ABI: we can now hammer (bitbang) individual lines or sets of
     lines and read individual lines or sets of lines from userspace,
     and we can also register to listen to GPIO events from userspace.

     As a tie-in we have two new tools in tools/gpio: gpio-hammer and
     gpio-event-mon that illustrate the proper use of the new ABI.  As
     someone said: the wild west days of GPIO are now over.

   - Continued to remove the pointless ARCH_[WANT_OPTIONAL|REQUIRE]_GPIOLIB
     Kconfig symbols.  I'm patching hexagon, openrisc, powerpc, sh,
     unicore, ia64 and microblaze.  These are either ACKed by their
     maintainers or patched anyways after a grace period and no response
     from maintainers.

     Some archs (ARM) come in from their trees, and others (x86) are
     still not fixed, so I might send a second pull request to root it
     out later in this merge window, or just defer to v4.9.

   - The GPIO tools are moved to the tools build system.

  New drivers:

   - New driver for the MAX77620/MAX20024.

   - New driver for the Intel Merrifield.

   - Enabled PCA953x for the TI PCA9536.

   - Enabled PCA953x for the Intel Edison.

   - Enabled R8A7792 in the RCAR driver.

  Driver improvements:

   - The STMPE and F7188x now supports the .get_direction() callback.

   - The Xilinx driver supports setting multiple lines at once.

   - ACPI support for the Vulcan GPIO controller.

   - The MMIO GPIO driver supports device tree probing.

   - The Acer One 10 is supported through the _DEP ACPI attribute.

  Cleanups:

   - A major cleanup of the OF/DT support code.  It is way easier to
     read and understand now, probably this improves performance too.

   - Drop a few redundant .owner assignments.

   - Remove CLPS711x boardfile support: we are 100% DT"

* tag 'gpio-v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (67 commits)
  MAINTAINERS: Add INTEL MERRIFIELD GPIO entry
  gpio: dwapb: add missing fwnode_handle_put() in dwapb_gpio_get_pdata()
  gpio: merrifield: Protect irq_ack() and gpio_set() by lock
  gpio: merrifield: Introduce GPIO driver to support Merrifield
  gpio: intel-mid: Make it depend to X86_INTEL_MID
  gpio: intel-mid: Sort header block alphabetically
  gpio: intel-mid: Remove potentially harmful code
  gpio: rcar: add R8A7792 support
  gpiolib: remove duplicated include from gpiolib.c
  Revert "gpio: convince line to become input in irq helper"
  gpiolib: of_find_gpio(): Don't discard errors
  gpio: of: Allow overriding the device node
  gpio: free handles in fringe cases
  gpio: tps65218: Add platform_device_id table
  gpio: max77620: get gpio value based on direction
  gpio: lynxpoint: avoid potential warning on error path
  tools/gpio: add install section
  tools/gpio: move to tools buildsystem
  gpio: intel-mid: switch to devm_gpiochip_add_data()
  gpio: 74x164: Use spi_write() helper instead of open coding
  ...

Pull media updates from Mauro Carvalho Chehab:

 - new framework support for HDMI CEC and remote control support

 - new encoding codec driver for Mediatek SoC

 - new frontend driver: helene tuner

 - added support for NetUp almost universal devices, with supports
   DVB-C/S/S2/T/T2 and ISDB-T

 - the mn88472 frontend driver got promoted from staging

 - a new driver for RCar video input

 - some soc_camera legacy drivers got removed: timb, omap1, mx2, mx3

 - lots of driver cleanups, improvements and fixups

* tag 'media/v4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (377 commits)
  [media] cec: always check all_device_types and features
  [media] cec: poll should check if there is room in the tx queue
  [media] vivid: support monitor all mode
  [media] cec: fix test for unconfigured adapter in main message loop
  [media] cec: limit the size of the transmit queue
  [media] cec: zero unused msg part after msg->len
  [media] cec: don't set fh to NULL in CEC_TRANSMIT
  [media] cec: clear all status fields before transmit and always fill in sequence
  [media] cec: CEC_RECEIVE overwrote the timeout field
  [media] cxd2841er: Reading SNR for DVB-C added
  [media] cxd2841er: Reading BER and UCB for DVB-C added
  [media] cxd2841er: fix switch-case for DVB-C
  [media] cxd2841er: fix signal strength scale for ISDB-T
  [media] cxd2841er: adjust the dB scale for DVB-C
  [media] cxd2841er: provide signal strength for DVB-C
  [media] cxd2841er: fix BER report via DVBv5 stats API
  [media] mb86a20s: apply mask to val after checking for read failure
  [media] airspy: fix error logic during device register
  [media] s5p-cec/TODO: add TODO item
  [media] cec/TODO: drop comment about sphinx documentation
  ...

Pull pstore subsystem updates from Kees Cook:
 "This expands the supported compressors, fixes some bugs, and finally
  adds DT bindings"

* tag 'pstore-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore/ram: add Device Tree bindings
  efi-pstore: implement efivars_pstore_exit()
  pstore: drop file opened reference count
  pstore: add lzo/lz4 compression support
  pstore: Cleanup pstore_dump()
  pstore: Enable compression on normal path (again)
  ramoops: Only unregister when registered

Pull orangefs updates from Mike Mashall:
 "Orangefs cleanups and enablement of O_DIRECT in open.

  Cleanups:

   - remove some unused defines, and also some obfuscatory ones.

   - remove a redundant xattr handler.

   - Remove useless xattr prefix arguments.

   - Be more picky about uid and gid handling WRT namespaces.

     Our use of current_user_ns() instead of init_user_ns left open the
     possibility that users could spoof their uids or gids when the
     server was running in a different namespace in "default security"
     mode.

   - Allow open(2) to succeed with O_DIRECT"

* tag 'for-linus-4.8-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  orangefs: fix namespace handling
  Orangefs: allow O_DIRECT in open
  orangefs: Remove useless xattr prefix arguments
  orangefs: Remove redundant "trusted." xattr handler
  orangefs: Remove useless defines

Pull ext4 updates from Ted Ts'o:
 "The major change this cycle is deleting ext4's copy of the file system
  encryption code and switching things over to using the copies in
  fs/crypto.  I've updated the MAINTAINERS file to add an entry for
  fs/crypto listing Jaeguk Kim and myself as the maintainers.

  There are also a number of bug fixes, most notably for some problems
  found by American Fuzzy Lop (AFL) courtesy of Vegard Nossum.  Also
  fixed is a writeback deadlock detected by generic/130, and some
  potential races in the metadata checksum code"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (21 commits)
  ext4: verify extent header depth
  ext4: short-cut orphan cleanup on error
  ext4: fix reference counting bug on block allocation error
  MAINTAINRES: fs-crypto maintainers update
  ext4 crypto: migrate into vfs's crypto engine
  ext2: fix filesystem deadlock while reading corrupted xattr block
  ext4: fix project quota accounting without quota limits enabled
  ext4: validate s_reserved_gdt_blocks on mount
  ext4: remove unused page_idx
  ext4: don't call ext4_should_journal_data() on the journal inode
  ext4: Fix WARN_ON_ONCE in ext4_commit_super()
  ext4: fix deadlock during page writeback
  ext4: correct error value of function verifying dx checksum
  ext4: avoid modifying checksum fields directly during checksum verification
  ext4: check for extents that wrap around
  jbd2: make journal y2038 safe
  jbd2: track more dependencies on transaction commit
  jbd2: move lockdep tracking to journal_s
  jbd2: move lockdep instrumentation for jbd2 handles
  ext4: respect the nobarrier mount option in nojournal mode
  ...

Pull PNP update from Rafael Wysocki:
 "One simple change to make the PNP core use device_initcall() instead
  of module_init() to run pnpbios_thread_init() (Paul Gortmaker)"

* tag 'pnp-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: make pnpbios core explicitly non-modular