The rcu_segcblist_accelerate() function returns true iff it is necessary
to request another grace period.  A tracing session showed that this
function unnecessarily requests grace periods.

For example, consider the following sequence of events:
1. Callbacks are queued only on the NEXT segment of CPU A's callback list.
2. CPU A runs RCU_SOFTIRQ, accelerating these callbacks from NEXT to WAIT.
3. Thus rcu_segcblist_accelerate() returns true, requesting grace period N.
4. RCU's grace-period kthread wakes up on CPU B and starts grace period N.
4. CPU A notices the new grace period and invokes RCU_SOFTIRQ.
5. CPU A's RCU_SOFTIRQ again invokes rcu_segcblist_accelerate(), but
   there are no new callbacks.  However, rcu_segcblist_accelerate()
   nevertheless (uselessly) requests a new grace period N+1.

This extra grace period results in additional lock contention and also
additional wakeups, all for no good reason.

This commit therefore adds a check to rcu_segcblist_accelerate() that
prevents the return of true when there are no new callbacks.

This change reduces the number of grace periods (GPs) and wakeups in each
of eleven five-second rcutorture runs as follows:

+----+-------------------+-------------------+
| #  | Number of GPs     | Number of Wakeups |
+====+=========+=========+=========+=========+
| 1  | With    | Without | With    | Without |
+----+---------+---------+---------+---------+
| 2  |      75 |      89 |     113 |     119 |
+----+---------+---------+---------+---------+
| 3  |      62 |      91 |     105 |     123 |
+----+---------+---------+---------+---------+
| 4  |      60 |      79 |      98 |     110 |
+----+---------+---------+---------+---------+
| 5  |      63 |      79 |      99 |     112 |
+----+---------+---------+---------+---------+
| 6  |      57 |      89 |      96 |     123 |
+----+---------+---------+---------+---------+
| 7  |      64 |      85 |      97 |     118 |
+----+---------+---------+---------+---------+
| 8  |      58 |      83 |      98 |     113 |
+----+---------+---------+---------+---------+
| 9  |      57 |      77 |      89 |     104 |
+----+---------+---------+---------+---------+
| 10 |      66 |      82 |      98 |     119 |
+----+---------+---------+---------+---------+
| 11 |      52 |      82 |      83 |     117 |
+----+---------+---------+---------+---------+

The reduction in the number of wakeups ranges from 5% to 40%.

Cc: urezki@gmail.com
[ paulmck: Rework commit log and comment. ]
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The x86/entry work removed all uses of __rcu_is_watching(), therefore
this commit removes it entirely.

Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <x86@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The RCU grace-period kthread's force-quiescent state (FQS) loop should
never see an offline CPU that has not yet reported a quiescent state.
After all, the offline CPU should have reported a quiescent state
during the CPU-offline process, or, failing that, by rcu_gp_init()
if it ran concurrently with either the CPU going offline or the last
task on a leaf rcu_node structure exiting its RCU read-side critical
section while all CPUs corresponding to that structure are offline.
The FQS loop should therefore complain if it does see an offline CPU
that has not yet reported a quiescent state.

And it does, but only once the grace period has been in force for a
full second.  This commit therefore makes this warning more aggressive,
so that it will trigger as soon as the condition makes its appearance.

Light testing with TREE03 and hotplug shows no warnings.  This commit
also converts the warning to WARN_ON_ONCE() in order to stave off possible
log spam.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Since at least v4.19, the FQS loop no longer reports quiescent states
for offline CPUs except in emergency situations.

This commit therefore fixes the comment in rcu_gp_init() to match the
current code.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit increases RCU's ability to defend itself by emitting a warning
if one of the nocb CB kthreads invokes the GP kthread's wait function.
This warning augments a similar check that is carried out at the end
of rcutorture testing and when RCU CPU stall warnings are emitted.
The problem with those checks is that the miscreants have long since
departed and disposed of any and all evidence.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

When the rcu_cpu_started per-CPU variable was added by commit
f64c6013 ("rcu/x86: Provide early rcu_cpu_starting() callback"),
there were multiple sets of per-CPU rcu_data structures.  Therefore, the
rcu_cpu_started flag was added as a separate per-CPU variable.  But now
there is only one set of per-CPU rcu_data structures, so this commit
moves rcu_cpu_started to a new ->cpu_started field in that structure.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Use hlist_for_each_entry_srcu() instead of hlist_for_each_entry_rcu()
as it also checkes if the right lock is held.
Using hlist_for_each_entry_rcu() with a condition argument will not
report the cases where a SRCU protected list is traversed using
rcu_read_lock(). Hence, use hlist_for_each_entry_srcu().
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: <kvm@vger.kernel.org>

list/hlist_for_each_entry_rcu() provides an optional cond argument
to specify the lock held in the updater side.
However for SRCU read side, not providing the cond argument results
into false positive as whether srcu_read_lock is held or not is not
checked implicitly. Therefore, on read side the lockdep expression
srcu_read_lock_held(srcu struct) can solve this issue.

However, the function still fails to check the cases where srcu
protected list is traversed with rcu_read_lock() instead of
srcu_read_lock(). Therefore, to remove the false negative,
this patch introduces two new list traversal primitives :
list_for_each_entry_srcu() and hlist_for_each_entry_srcu().

Both of the functions have non-optional cond argument
as it is required for both read and update side, and simply checks
if the cond is true. For regular read side the lockdep expression
srcu_read_lock_head() can be passed as the cond argument to
list/hlist_for_each_entry_srcu().
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Suraj Upadhyay <usuraj35@gmail.com>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
[ paulmck: Add "true" per kbuild test robot feedback. ]
Signed-off-by: Madhuparna Bhowmik <madhuparnabhowmik10@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit fixes the kerneldoc comments for rcu_read_unlock_bh(),
rcu_read_unlock_sched() and rcu_head_after_call_rcu() so they e.g. get
properly linked in the API documentation. Also add parenthesis after
function names to match the notation used in other kerneldoc comments in
the same file.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Given that sysfs can change the value of rcu_cpu_stall_ftrace_dump at any
time, this commit adds a READ_ONCE() to the accesses to that variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Given that sysfs can change the value of rcu_kick_kthreads at any time,
this commit adds a READ_ONCE() to the sole access to that variable.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Given that sysfs can change the value of rcu_resched_ns at any time,
this commit adds a READ_ONCE() to the sole access to that variable.
While in the area, this commit also adds bounds checking, clamping the
value to at least a millisecond, but no longer than a second.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Given that sysfs can change the value of rcu_divisor at any time, this
commit adds a READ_ONCE to the sole access to that variable.  While in
the area, this commit also adds bounds checking, clamping the value to
a shift that makes sense for a signed long.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

The rcu_data structure's ->nocb_timer field is used to defer wakeups of
the corresponding no-CBs CPU's grace-period kthread ("rcuog*"), and that
structure's ->nocb_defer_wakeup field is used to track such deferral.
This means that the show_rcu_nocb_state() printing an error when those
fields are set for a CPU not corresponding to a no-CBs grace-period
kthread is erroneous.

This commit therefore switches the check from ->nocb_timer to
->nocb_bypass_timer and removes the check of ->nocb_defer_wakeup.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Originally, the call to rcu_preempt_blocked_readers_cgp() from
force_qs_rnp() had to be conditioned on CONFIG_PREEMPT_RCU=y, as in
commit a77da14c ("rcu: Yet another fix for preemption and CPU
hotplug").  However, there is now a CONFIG_PREEMPT_RCU=n definition of
rcu_preempt_blocked_readers_cgp() that unconditionally returns zero, so
invoking it is now safe.  In addition, the CONFIG_PREEMPT_RCU=n definition
of rcu_initiate_boost() simply releases the rcu_node structure's ->lock,
which is what happens when the "if" condition evaluates to false.

This commit therefore drops the IS_ENABLED(CONFIG_PREEMPT_RCU) check,
so that rcu_initiate_boost() is called only in CONFIG_PREEMPT_RCU=y
kernels when there are readers blocking the current grace period.
This does not change the behavior, but reduces code-reader confusion by
eliminating non-CONFIG_PREEMPT_RCU=y calls to rcu_initiate_boost().
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

On callback overload, it is necessary to quickly detect idle CPUs,
and rcu_gp_fqs_check_wake() checks for this condition.  Unfortunately,
the code following the call to this function does not repeat this check,
which means that in reality no actual quiescent-state forcing, instead
only a couple of quick and pointless wakeups at the beginning of the
grace period.

This commit therefore adds a check for the RCU_GP_FLAG_OVLD flag in
the post-wakeup "if" statement in rcu_gp_fqs_loop().

Fixes: 1fca4d12 ("rcu: Expedite first two FQS scans under callback-overload conditions")
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

A message of the form "rcu:    !!! lDTs ." can be tracked down, but
doing so is not trivial.  This commit therefore eases this process by
adding text so that this error message now reads as follows:
"rcu:    nocb GP activity on CB-only CPU!!! lDTs ."
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

During acceleration of CB, the rsp's gp_seq is rcu_seq_snap'd. This is
the value used for acceleration - it is the value of gp_seq at which it
is safe the execute all callbacks in the callback list.

The rdp's gp_seq is not very useful for this scenario. Make
rcu_grace_period report the gp_seq_req instead as it allows one to
reason about how the acceleration works.
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

GP numbers start from -300 and gp_seq numbers start of -1200 (for a
shift of 2). These negative numbers are printed as unsigned long which
not only takes up more text space, but is rather confusing to the reader
as they have to constantly expend energy to truncate the number. Just
print the negative numbering directly.

Cc: Uladzislau Rezki (Sony) <urezki@gmail.com>
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

This commit moves the initialization of the CONFIG_PREEMPT=n version of
the rcu_exp_handler() function's rdp and rnp local variables into their
respective declarations to save a couple lines of code.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

KCSAN is now in mainline, so this commit removes the stubs for the
data_race(), ASSERT_EXCLUSIVE_WRITER(), and ASSERT_EXCLUSIVE_ACCESS()
macros.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

KCSAN is now in mainline, so this commit removes the stubs for the
data_race(), ASSERT_EXCLUSIVE_WRITER(), and ASSERT_EXCLUSIVE_ACCESS()
macros.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

KCSAN is now in mainline, so this commit removes the stubs for the
data_race(), ASSERT_EXCLUSIVE_WRITER(), and ASSERT_EXCLUSIVE_ACCESS()
macros.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>

Pull io_uring fixes from Jens Axboe:
 "A few differerent things in here.

  Seems like syzbot got some more io_uring bits wired up, and we got a
  handful of reports and the associated fixes are in here.

  General fixes too, and a lot of them marked for stable.

  Lastly, a bit of fallout from the async buffered reads, where we now
  more easily trigger short reads. Some applications don't really like
  that, so the io_read() code now handles short reads internally, and
  got a cleanup along the way so that it's now easier to read (and
  documented). We're now passing tests that failed before"

* tag 'io_uring-5.9-2020-08-15' of git://git.kernel.dk/linux-block:
  io_uring: short circuit -EAGAIN for blocking read attempt
  io_uring: sanitize double poll handling
  io_uring: internally retry short reads
  io_uring: retain iov_iter state over io_read/io_write calls
  task_work: only grab task signal lock when needed
  io_uring: enable lookup of links holding inflight files
  io_uring: fail poll arm on queue proc failure
  io_uring: hold 'ctx' reference around task_work queue + execute
  fs: RWF_NOWAIT should imply IOCB_NOIO
  io_uring: defer file table grabbing request cleanup for locked requests
  io_uring: add missing REQ_F_COMP_LOCKED for nested requests
  io_uring: fix recursive completion locking on oveflow flush
  io_uring: use TWA_SIGNAL for task_work uncondtionally
  io_uring: account locked memory before potential error case
  io_uring: set ctx sq/cq entry count earlier
  io_uring: Fix NULL pointer dereference in loop_rw_iter()
  io_uring: add comments on how the async buffered read retry works
  io_uring: io_async_buf_func() need not test page bit

Commit 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one()
and pmd_free_one()") converted parisc to use generic version of
pmd_alloc_one() but it missed the fact that parisc uses order-1 pages for
PMD.

Restore the original version of pmd_alloc_one() for parisc, just use
GFP_PGTABLE_KERNEL that implies __GFP_ZERO instead of GFP_KERNEL and
memset.

Fixes: 1355c31e ("asm-generic: pgalloc: provide generic pmd_alloc_one() and pmd_free_one()")
Reported-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lkml.kernel.org/r/9f2b5ebd-e4a4-0fa1-6cd3-4b9f6892d1ad@linux.eeSigned-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull block fixes from Jens Axboe:
 "A few fixes on the block side of things:

   - Discard granularity fix (Coly)

   - rnbd cleanups (Guoqing)

   - md error handling fix (Dan)

   - md sysfs fix (Junxiao)

   - Fix flush request accounting, which caused an IO slowdown for some
     configurations (Ming)

   - Properly propagate loop flag for partition scanning (Lennart)"

* tag 'block-5.9-2020-08-14' of git://git.kernel.dk/linux-block:
  block: fix double account of flush request's driver tag
  loop: unset GENHD_FL_NO_PART_SCAN on LOOP_CONFIGURE
  rnbd: no need to set bi_end_io in rnbd_bio_map_kern
  rnbd: remove rnbd_dev_submit_io
  md-cluster: Fix potential error pointer dereference in resize_bitmaps()
  block: check queue's limits.discard_granularity in __blkdev_issue_discard()
  md: get sysfs entry after redundancy attr group create

Pull RISC-V fix from Palmer Dabbelt:
 "I collected a single fix during the merge window: we managed to break
  the early trap setup on !MMU, this fixes it"

* tag 'riscv-for-linus-5.9-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Setup exception vector for nommu platform

Pull arch/sh updates from Rich Felker:
 "Cleanup, SECCOMP_FILTER support, message printing fixes, and other
  changes to arch/sh"

* tag 'sh-for-5.9' of git://git.libc.org/linux-sh: (34 commits)
  sh: landisk: Add missing initialization of sh_io_port_base
  sh: bring syscall_set_return_value in line with other architectures
  sh: Add SECCOMP_FILTER
  sh: Rearrange blocks in entry-common.S
  sh: switch to copy_thread_tls()
  sh: use the generic dma coherent remap allocator
  sh: don't allow non-coherent DMA for NOMMU
  dma-mapping: consolidate the NO_DMA definition in kernel/dma/Kconfig
  sh: unexport register_trapped_io and match_trapped_io_handler
  sh: don't include <asm/io_trapped.h> in <asm/io.h>
  sh: move the ioremap implementation out of line
  sh: move ioremap_fixed details out of <asm/io.h>
  sh: remove __KERNEL__ ifdefs from non-UAPI headers
  sh: sort the selects for SUPERH alphabetically
  sh: remove -Werror from Makefiles
  sh: Replace HTTP links with HTTPS ones
  arch/sh/configs: remove obsolete CONFIG_SOC_CAMERA*
  sh: stacktrace: Remove stacktrace_ops.stack()
  sh: machvec: Modernize printing of kernel messages
  sh: pci: Modernize printing of kernel messages
  ...

One case was missed in the short IO retry handling, and that's hitting
-EAGAIN on a blocking attempt read (eg from io-wq context). This is a
problem on sockets that are marked as non-blocking when created, they
don't carry any REQ_F_NOWAIT information to help us terminate them
instead of perpetually retrying.

Fixes: 227c0c96 ("io_uring: internally retry short reads")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's a bit of confusion on the matching pairs of poll vs double poll,
depending on if the request is a pure poll (IORING_OP_POLL_ADD) or
poll driven retry.

Add io_poll_get_double() that returns the double poll waitqueue, if any,
and io_poll_get_single() that returns the original poll waitqueue. With
that, remove the argument to io_poll_remove_double().

Finally ensure that wait->private is cleared once the double poll handler
has run, so that remove knows it's already been seen.

Cc: stable@vger.kernel.org # v5.8
Reported-by: syzbot+7f617d4a9369028b8a2c@syzkaller.appspotmail.com
Fixes: 18bceab1 ("io_uring: allow POLL_ADD with double poll_wait() users")
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull more perf tools updates from Arnaldo Carvalho de Melo:
 "Fixes:
   - Fixes for 'perf bench numa'.

   - Always memset source before memcpy in 'perf bench mem'.

   - Quote CC and CXX for their arguments to fix build in environments
     using those variables to pass more than just the compiler names.

   - Fix module symbol processing, addressing regression detected via
     "perf test".

   - Allow multiple probes in record+script_probe_vfs_getname.sh 'perf
     test' entry.

  Improvements:
   - Add script to autogenerate socket family name id->string table from
     copy of kernel header, used so far in 'perf trace'.

   - 'perf ftrace' improvements to provide similar options for this
     utility so that one can go from 'perf record', 'perf trace', etc to
     'perf ftrace' just by changing the name of the subcommand.

   - Prefer new "sched:sched_waking" trace event when it exists in 'perf
     sched' post processing.

   - Update POWER9 metrics to utilize other metrics.

   - Fall back to querying debuginfod if debuginfo not found locally.

  Miscellaneous:
   - Sync various kvm headers with kernel sources"

* tag 'perf-tools-2020-08-14' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (40 commits)
  perf ftrace: Make option description initials all capital letters
  perf build-ids: Fall back to debuginfod query if debuginfo not found
  perf bench numa: Remove dead code in parse_nodes_opt()
  perf stat: Update POWER9 metrics to utilize other metrics
  perf ftrace: Add change log
  perf: ftrace: Add set_tracing_options() to set all trace options
  perf ftrace: Add option --tid to filter by thread id
  perf ftrace: Add option -D/--delay to delay tracing
  perf: ftrace: Allow set graph depth by '--graph-opts'
  perf ftrace: Add support for trace option tracing_thresh
  perf ftrace: Add option 'verbose' to show more info for graph tracer
  perf ftrace: Add support for tracing option 'irq-info'
  perf ftrace: Add support for trace option funcgraph-irqs
  perf ftrace: Add support for trace option sleep-time
  perf ftrace: Add support for tracing option 'func_stack_trace'
  perf tools: Add general function to parse sublevel options
  perf ftrace: Add option '--inherit' to trace children processes
  perf ftrace: Show trace column header
  perf ftrace: Add option '-m/--buffer-size' to set per-cpu buffer size
  perf ftrace: Factor out function write_tracing_file_int()
  ...

Pull x86 fixes from Ingo Molnar:
 "Misc fixes and small updates all around the place:

   - Fix mitigation state sysfs output

   - Fix an FPU xstate/sxave code assumption bug triggered by
     Architectural LBR support

   - Fix Lightning Mountain SoC TSC frequency enumeration bug

   - Fix kexec debug output

   - Fix kexec memory range assumption bug

   - Fix a boundary condition in the crash kernel code

   - Optimize porgatory.ro generation a bit

   - Enable ACRN guests to use X2APIC mode

   - Reduce a __text_poke() IRQs-off critical section for the benefit of
     PREEMPT_RT"

* tag 'x86-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Acquire pte lock with interrupts enabled
  x86/bugs/multihit: Fix mitigation reporting when VMX is not in use
  x86/fpu/xstate: Fix an xstate size check warning with architectural LBRs
  x86/purgatory: Don't generate debug info for purgatory.ro
  x86/tsr: Fix tsc frequency enumeration bug on Lightning Mountain SoC
  kexec_file: Correctly output debugging information for the PT_LOAD ELF header
  kexec: Improve & fix crash_exclude_mem_range() to handle overlapping ranges
  x86/crash: Correct the address boundary of function parameters
  x86/acrn: Remove redundant chars from ACRN signature
  x86/acrn: Allow ACRN guest to use X2APIC mode

Pull scheduler fixes from Ingo Molnar:
 "Two fixes: fix a new tracepoint's output value, and fix the formatting
  of show-state syslog printouts"

* tag 'sched-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/debug: Fix the alignment of the show-state debug output
  sched: Fix use of count for nr_running tracepoint

Pull perf fixes from Ingo Molnar:
 "Misc fixes, an expansion of perf syscall access to CAP_PERFMON
  privileged tools, plus a RAPL HW-enablement for Intel SPR platforms"

* tag 'perf-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/rapl: Add support for Intel SPR platform
  perf/x86/rapl: Support multiple RAPL unit quirks
  perf/x86/rapl: Fix missing psys sysfs attributes
  hw_breakpoint: Remove unused __register_perf_hw_breakpoint() declaration
  kprobes: Remove show_registers() function prototype
  perf/core: Take over CAP_SYS_PTRACE creds to CAP_PERFMON capability

Pull locking fixlets from Ingo Molnar:
 "A documentation fix and a 'fallthrough' macro update"

* tag 'locking-urgent-2020-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  futex: Convert to use the preferred 'fallthrough' macro
  Documentation/locking/locktypes: Fix a typo

Pull 9p updates from Dominique Martinet:

 - some code cleanup

 - a couple of static analysis fixes

 - setattr: try to pick a fid associated with the file rather than the
   dentry, which might sometimes matter

* tag '9p-for-5.9-rc1' of git://github.com/martinetd/linux:
  9p: Remove unneeded cast from memory allocation
  9p: remove unused code in 9p
  net/9p: Fix sparse endian warning in trans_fd.c
  9p: Fix memory leak in v9fs_mount
  9p: retrieve fid from file when file instance exist.

Pull cifs fixes from Steve French:
 "Three small cifs/smb3 fixes, one for stable fixing mkdir path with
  the 'idsfromsid' mount option"

* tag '5.9-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
  SMB3: Fix mkdir when idsfromsid configured on mount
  cifs: Convert to use the fallthrough macro
  cifs: Fix an error pointer dereference in cifs_mount()

Pull NFS client updates from Trond Myklebust:
 "Stable fixes:
   - pNFS: Don't return layout segments that are being used for I/O
   - pNFS: Don't move layout segments off the active list when being used for I/O

  Features:
   - NFS: Add support for user xattrs through the NFSv4.2 protocol
   - NFS: Allow applications to speed up readdir+statx() using AT_STATX_DONT_SYNC
   - NFSv4.0 allow nconnect for v4.0

  Bugfixes and cleanups:
   - nfs: ensure correct writeback errors are returned on close()
   - nfs: nfs_file_write() should check for writeback errors
   - nfs: Fix getxattr kernel panic and memory overflow
   - NFS: Fix the pNFS/flexfiles mirrored read failover code
   - SUNRPC: dont update timeout value on connection reset
   - freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
   - sunrpc: destroy rpc_inode_cachep after unregister_filesystem"

* tag 'nfs-for-5.9-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (32 commits)
  NFS: Fix flexfiles read failover
  fs: nfs: delete repeated words in comments
  rpc_pipefs: convert comma to semicolon
  nfs: Fix getxattr kernel panic and memory overflow
  NFS: Don't return layout segments that are in use
  NFS: Don't move layouts to plh_return_segs list while in use
  NFS: Add layout segment info to pnfs read/write/commit tracepoints
  NFS: Add tracepoints for layouterror and layoutstats.
  NFS: Report the stateid + status in trace_nfs4_layoutreturn_on_close()
  SUNRPC dont update timeout value on connection reset
  nfs: nfs_file_write() should check for writeback errors
  nfs: ensure correct writeback errors are returned on close()
  NFSv4.2: xattr cache: get rid of cache discard work queue
  NFS: remove redundant initialization of variable result
  NFSv4.0 allow nconnect for v4.0
  freezer: Add unsafe versions of freezable_schedule_timeout_interruptible for NFS
  sunrpc: destroy rpc_inode_cachep after unregister_filesystem
  NFSv4.2: add client side xattr caching.
  NFSv4.2: hook in the user extended attribute handlers
  NFSv4.2: add the extended attribute proc functions.
  ...

Pull edac fix from Tony Luck:
 "Fix for the ie31200 driver that missed the first pull"

* tag 'edac_updates_for_5.9_pt2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/ie31200: Fallback if host bridge device is already initialized