This patch replaces static const char proc[] = <function name>
with __FUNCTION__

Based on my discussions with Pete Zaitcev <zaitcev@redhat.com>, I'm
convinced that globally re-writing the START_STOP command into a
TEST_UNIT_READY command is a good idea.  This is supported by the fact
that:

(1) Lots of devices don't support START_STOP
(2) Those that do support it often don't do a good job
(3) Win/Mac will never send these commands over a USB bus

So, here's a patch that re-writes them into Test Unit Ready commands.  It
seems to work on my system, but needs more testing.  There may be a problem
with this code still.... it seems that the SCSI layer can get convinced
that the unit is not ready permanently.  I'm honestly not certain what bit
of code is wrong where, so reports from others would be greatly
appreciated.

Apparently, some new 2.5 scsi code tries to get the vital product data
pages using the INQUIRY command.  Unfortunately, most USB devices do not
support this.

The following patch intercepts all EVPD requests and responds with the
per-spec response of "Illegal Request: Invalid field in CDB".

This patch uses the setVideoMode callback in usbvideo to allow
the VIDIOCSWIN ioctl() to set the size and speed of the camera.

Ported it from 2.4, any breakage is my fault :)

into kroah.com:/home/greg/linux/BK/gregkh-2.5

but some files still did (and got the wrong results on UP).

Since they didn't actually _use_ the BKL anyway, remove the
include.

since it was generic.

Remove all architecture-specific <asm/smplock.h> files.

 - Use req->rq_received to determine the message length instead of
   assuming that it goes to the end of the page.

 - If the server returned an illegal record so that we cannot make
   progress by retrying the request on a fresh page, truncate the
   entire listing and return a syslog error.

 - Fix the check for whether or not the received message length has
   somehow been truncated: we need to use req->rq_received rather
   than the receive buffer length (req->rq_rlen).

 - Ensure that we set res->eof correctly. In particular, we need to
   clear it if we find ourselves attempting to recover from a
   truncated READ.

 - Don't set PageUptodate() on those pages that are the victim of
   message truncation.

 - cleanup #defines: I do not follow the rationale behind the
   odd line-wrapped defines at the beginning of the file.  If
   we have to use multiple lines, then we might as well do so
   cleanly and according to normal practice...

 - Remove a level of indirection: do not have spin_lock_foo
   use spin_lock - just explicitly call what is needed.

 - we do not need to define the spin_lock functions twice, once
   for CONFIG_PREEMPT and once for !CONFIG_PREEMPT.  Defining
   them once with the preempt macros will optimize away fine.

 - cleanup preempt.h too

 - other misc. cleanup, improved comments, reordering, etc.

This fixes the ptrace wait4() anomaly that can be observed in any
previous Linux kernel i could get my hands at.

If the parent still has other children (that are being traced by
somebody), we wait for them or return immediately without an error in
case of WNOHANG.

Finally, this chunk removes the references to the UFS & ROMFS
entries in struct superblock, leaving just ext3 and hpfs as
the only remaining fs's to be fixed up.

This one from Brian Gerst seperates UFS from
the struct superblock union.

This patch from Christoph Hellwig divorces ROMFS
from the struct superblock union, as has been done
to various other filesystems during 2.5

try_to_unmap() dies if the to-be-unmapped page has a non-NULL ->mapping.

But the preceding logic in shrink_cache() forgot about the
rarely-occurring pages which have buffers and no ->mapping.

I have a test_and_set_bit(PG_chainlock, page->flags) in page reclaim.
Which works fine on SMP.  But on uniprocessor, we made
pte_chain_unlock() a no-op, so all pages end up with PG_chainlock set.
refill_inactive() cannot move any pages onto the inactive list and the
machine dies.

The patch removes the test_and_set_bit optimisation in there and just
uses pte_chain_lock().  If we want that (dubious) optimisation back
then let's do it right and create pte_chain_trylock().

__page_cache_release() needs to recheck the page count inside the LRU
lock, because shrink_cache() may have found the page on the LRU and
incremented its refcount again.

Which is carefully documented over __pagevec_release().  Duh.

Here's a patch from Andrea's tree that uses IRQ_BALANCE_INTERVAL to
define how often interrupts are balanced, staying independent from HZ.

  It also makes sure that there _is_ a change to the configuration
before it actually writes it.  It reminds me of the mod_timer
optimization.

the attached patch updates a number of items:

 - adds cleanups suggested by Christoph Hellwig: needed unlikely()
   statements, a superfluous #define and line length problems.

 - splits up the global ptrace list into per-task ptrace lists. This was
   pretty straightforward, and this makes the worst-case exit() latency
   O(nr_children).

the per-task ptrace lists unearthed a bug that the previous code did not
take care of: tasks on the ptrace list have to be correctly reparented as
well. This patch passed my stresstests as well.

This patch adds a callback for VIDIOCSWIN ioctl to usbvideo so
the webcam miniport drivers can implement handling for the ioctl.

It also makes VIDIOCGWIN return the frame size for the current
mode rather than the canvas size. For current drivers
uvd->canvas == uvd->videosize since the frame size is set
when the module is loaded.

Whoops!  Accidentally introduced a typo.  This patch should fix the typo...
it's designed to apply after the last one.

This should be the final patch to make the abort mechanisms work properly.

Another cleanup patch:

   - removes more usbcore-internal symbols from sight of device drivers
       * some are only for the uhci driver
       * most are shared just a bit more widely
   - DEVNUM_ROUND_ROBIN is no longer an internal option
   - usb_root_hub_string() gone, per the FIXME
   - various kerneldoc fixes and updates
   - uses legal value (en-us) for root hub strings
   - hub driver only shows port fixed/removable for compound devices

        this fixes HP's vendor ID in ipaq.h

This patch presents the snapshot button on the camera as an
event input device.

This patch against 2.5.31 cleans up the RingQueue_* functions

- make the buffer length be a power of 2 to speed up index manipulation
- make RingQueue_Dequeue use memcpy() rather than a byte by byte copy
- make RingQueue_Enqueue use memcpy() instead of memmove() as the memory
  regions do not overlap
- Add RingQueue_Flush() and RingQueue_GetFreeSpace()
- make RingQueue_GetLength() an inline

oh, setup.S. nasty indeed, bogus GDT limit.

This updates the CLONE_CLEARTID case to use futexes to make it easier
to wait for a thread exit.

glibc/pthreads had been updated to use the TID-futex, this removes an
extra system-call and it also simplifies the pthread_join() code.  The
pthreads testcode works just fine with the new kernel and does not work
with a kernel that does not do the futex wakeup, so it's working fine.

and the call trace instead.

This is the second part of "broken cfb* support in the 2.5.31-bk".  I
needed fbcon-cfb2 on one of my systems, and so I went through all
fbcon-* drivers and fixed them.

line_length, type, type_aux and visual were moved from display to
fb_info in last James Simmon's fbdev update.  Unfortunately lowlevel
support modules were not updated.

into home.transmeta.com:/home/torvalds/v2.5/linux

I want to find a way to get all those PageReserved tests out of
there, because they are very expensive.  But now is not the
time.

Make sure that the VC tty pointer is cleared when the tty is free'd.

into home.transmeta.com:/home/torvalds/v2.5/linux