- 07 Oct, 2020 1 commit
-
-
Colin Ian King authored
There is a spelling mistake in a dev_warn message. Fix it. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20201006152024.542418-1-colin.king@canonical.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 06 Oct, 2020 16 commits
-
-
Mark Brown authored
Linux 5.9-rc5
-
Mark Brown authored
Merge series "ASoC: Intel: Remove obsolete solutions and components" from Cezary Rojewski <cezary.rojewski@intel.com>: Follow up to catpt series as mentioned in: [PATCH v10 00/14] ASoC: Intel: Catpt - Lynx and Wildcat point https://www.spinics.net/lists/alsa-devel/msg116440.html As catpt is a direct replacement to sound/soc/intel/haswell, it leaves a lot of code redudant. The second legacy solution - baytrail - is deprecated for a long time by sound/soc/intel/atom with SOF flavor available too. This series addresses the redudancy and removes obsolete code. Along with the legacy solutions, all orphaned components are removed too. As a consequence, further cleanups are unlocked: sound/soc/intel/skylake becomes the sole user of processing code found in sound/soc/intel/common. Those are not part of this series. Changes in v2: - just a rebase so patch 04/13 applies cleanly - left the tags as no actual changes done in between Cezary Rojewski (13): ASoC: Intel: Remove haswell solution ASoC: Intel: Remove max98090 support for baytrail solution ASoC: Intel: Remove rt5640 support for baytrail solution ASoC: Intel: Remove baytrail solution ASoC: Intel: Remove SST ACPI component ASoC: Intel: Remove SST firmware components ASoC: Intel: Skylake: Unassign ram_read and read_write ops ASoC: Intel: Remove unused DSP operations ASoC: Intel: Remove unused DSP interface fields ASoC: Intel: Remove SST-legacy specific constants ASoC: Intel: Make atom components independent of sst-dsp ASoC: Intel: Remove sst_pdata structure ASoC: Intel: Remove sst_dsp_get_thread_context include/sound/soc-acpi-intel-match.h | 1 - include/trace/events/hswadsp.h | 385 --- sound/soc/intel/Kconfig | 26 - sound/soc/intel/Makefile | 1 - sound/soc/intel/atom/sst/sst.c | 1 - sound/soc/intel/atom/sst/sst.h | 7 + sound/soc/intel/atom/sst/sst_acpi.c | 1 - sound/soc/intel/atom/sst/sst_drv_interface.c | 3 - sound/soc/intel/atom/sst/sst_ipc.c | 1 - sound/soc/intel/atom/sst/sst_loader.c | 1 - sound/soc/intel/atom/sst/sst_pvt.c | 1 - sound/soc/intel/atom/sst/sst_stream.c | 1 - sound/soc/intel/baytrail/Makefile | 5 - sound/soc/intel/baytrail/sst-baytrail-dsp.c | 358 --- sound/soc/intel/baytrail/sst-baytrail-ipc.c | 772 ------ sound/soc/intel/baytrail/sst-baytrail-ipc.h | 64 - sound/soc/intel/baytrail/sst-baytrail-pcm.c | 459 ---- sound/soc/intel/boards/Kconfig | 25 - sound/soc/intel/boards/Makefile | 4 - sound/soc/intel/boards/byt-max98090.c | 182 -- sound/soc/intel/boards/byt-rt5640.c | 224 -- sound/soc/intel/boards/bytcht_es8316.c | 1 - sound/soc/intel/boards/bytcr_rt5640.c | 1 - sound/soc/intel/common/Makefile | 4 - .../intel/common/soc-acpi-intel-byt-match.c | 15 - sound/soc/intel/common/sst-acpi.c | 236 -- sound/soc/intel/common/sst-dsp-priv.h | 284 +-- sound/soc/intel/common/sst-dsp.c | 162 -- sound/soc/intel/common/sst-dsp.h | 222 -- sound/soc/intel/common/sst-firmware.c | 1273 ---------- sound/soc/intel/common/sst-ipc.c | 27 - sound/soc/intel/common/sst-ipc.h | 3 - sound/soc/intel/haswell/Makefile | 5 - sound/soc/intel/haswell/sst-haswell-dsp.c | 705 ------ sound/soc/intel/haswell/sst-haswell-ipc.c | 2222 ----------------- sound/soc/intel/haswell/sst-haswell-ipc.h | 527 ---- sound/soc/intel/haswell/sst-haswell-pcm.c | 1369 ---------- sound/soc/intel/skylake/bxt-sst.c | 2 - sound/soc/intel/skylake/cnl-sst.c | 4 +- sound/soc/intel/skylake/skl-sst-dsp.c | 2 +- sound/soc/intel/skylake/skl-sst-ipc.c | 2 +- sound/soc/intel/skylake/skl-sst.c | 2 - 42 files changed, 11 insertions(+), 9579 deletions(-) delete mode 100644 include/trace/events/hswadsp.h delete mode 100644 sound/soc/intel/baytrail/Makefile delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-dsp.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.c delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-ipc.h delete mode 100644 sound/soc/intel/baytrail/sst-baytrail-pcm.c delete mode 100644 sound/soc/intel/boards/byt-max98090.c delete mode 100644 sound/soc/intel/boards/byt-rt5640.c delete mode 100644 sound/soc/intel/common/sst-acpi.c delete mode 100644 sound/soc/intel/common/sst-firmware.c delete mode 100644 sound/soc/intel/haswell/Makefile delete mode 100644 sound/soc/intel/haswell/sst-haswell-dsp.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.c delete mode 100644 sound/soc/intel/haswell/sst-haswell-ipc.h delete mode 100644 sound/soc/intel/haswell/sst-haswell-pcm.c -- 2.17.1
-
Alex Dewar authored
Commit 9c34d023 ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split"), in rearranging various files, also replaced calls to platform_get_resource_by_name() + devm_ioremap_resource() with a single call to devm_platform_ioremap_resource_byname(). However, the struct resource is needed as we access its members so at present a null pointer is dereferenced. Fix by doing things the old way. Fixes: 9c34d023 ("ASoC: omap-mcbsp: Re-arrange files for core McBSP and Sidetone function split") Signed-off-by:
Alex Dewar <alex.dewar90@gmail.com> Link: https://lore.kernel.org/r/20201004102535.325547-1-alex.dewar90@gmail.comSigned-off-by:
-
Cezary Rojewski authored
While sst_dsp_get_thread_context() is declared as solution-agnostic, it is only used by /skylake/ solution. Majority of thread_context field usages are direct accesses. Improve code cohesiveness and convert to single usage model. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by:
Liam Girdwood <liam.r.girdwood@intel.com> Link: https://lore.kernel.org/r/20201006064907.16277-14-cezary.rojewski@intel.comSigned-off-by:
-
Cezary Rojewski authored
struct sst_pdata is unused among remaining /sound/soc/intel solution so remove it. Signed-off-by:
-
Cezary Rojewski authored
With sound/soc/intel/haswell and /baytrail gone, registers left within sst-dsp header are atom-specific. Relocate these to atom internal header to make atom truely independent of sound/soc/common processing code. Signed-off-by:
-
Cezary Rojewski authored
As sound/soc/intel/haswell and /baytrail are no more, all SST-legacy specific constants and registers are redundant so remove them. Signed-off-by:
-
Cezary Rojewski authored
With redundant DSP operations removed, several fields for structures: sst_ops, sst_addr and sst_dsp become obsolete. Remove them too. Signed-off-by:
-
Cezary Rojewski authored
sound/soc/intel/common/ declares several helper functions for /intel/ solutions. In practice, differences between these - /haswell/ and /skylake/ especially - led to many of the helpers being used only by a single solution. As /skylake/ makes no use of these and /haswell/ and /baytail/ are no more, remove the unused functions. Signed-off-by:
-
Cezary Rojewski authored
Skylake driver makes no use of ram_read or ram_write operation so remove the assignments. This prepares sound/soc/common/sst-dsp* for following removal of unused DSP operations. Signed-off-by:
-
Cezary Rojewski authored
sst-firmware is host to many image loading over DMA operations. Majority of code targets sound/soc/intel/haswell solution as /baytrail/ never switched to DMA-based firmware loading. With /haswell/ removed this code serves no purpose. Address this redundancy. Signed-off-by:
-
Cezary Rojewski authored
baytrail and haswell solutions present within sound/soc/intel are the only users of sst-acpi componenent and with them removed it becomes redundant so remove it too. Signed-off-by:
-
Cezary Rojewski authored
sound/soc/intel/baytrail is a niche solution which supports limited number of BYT products - as described by snd_soc_acpi_intel_baytrail_legacy_machines table. For a long time it's deprecated in favor of sound/soc/intel/atom solution with SOF providing support for some products too effectively rendering /baytrail/ redundant. Remove deprecated code from ASoC tree. Signed-off-by:
-
Cezary Rojewski authored
byt-rt5640 is deprecated in favor of bytcr_rt5640 used by sound/soc/intel/atom and SOF solutions both. Remove redundant machine board and all related code. Signed-off-by:
-
Cezary Rojewski authored
byt-max98090 is deprecated in favor of cht-bsw-max98090 used by sound/soc/intel/atom and SOF solutions both. Remove redundant machine board and all related code. Signed-off-by:
-
Cezary Rojewski authored
Newly added catpt solution found in sound/soc/intel/catpt is a direct replacement to sound/soc/intel/haswell. It covers all features supported by it and more - by aligning to recommended flows and requirement list based on Windows driver equivalent. No harm is done to userspace as catpt - similarly to haswell - loads no extenal topology files while sharing the exact same ADSP firmware binary. Given the above, existing haswell code is redundant so remove it. Signed-off-by:
-
- 05 Oct, 2020 20 commits
-
-
Cezary Rojewski authored
PCM operations for DAI links connected with DSP platform component involve communication with DSP firmware by IPCs. As IPC protocol may cause thread to sleep while waiting for a response from DSP, propagate that information to ALSA core by marking all FE DAIs as nonatomic. Signed-off-by:
-
Cezary Rojewski authored
PCM operations for DAI links connected with DSP platform component involve communication with DSP firmware by IPCs. As IPC protocol may cause thread to sleep while waiting for a response from DSP, propagate that information to ALSA core by marking all FE DAIs as nonatomic. Signed-off-by:
-
Cezary Rojewski authored
PCM operations for DAI links connected with DSP platform component involve communication with DSP firmware by IPCs. As IPC protocol may cause thread to sleep while waiting for a response from DSP, propagate that information to ALSA core by marking all FE DAIs as nonatomic. Signed-off-by:
-
Cezary Rojewski authored
PCM operations for DAI links connected with DSP platform component involve communication with DSP firmware by IPCs. As IPC protocol may cause thread to sleep while waiting for a response from DSP, propagate that information to ALSA core by marking all FE DAIs as nonatomic. Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20201004090609.29066-1-cezary.rojewski@intel.comSigned-off-by:
-
Mark Brown authored
Merge series "ASoC: sun8i-codec: support for AIF2 and AIF3" from Samuel Holland <samuel@sholland.org>: This series adds support the other two AIFs present in the sun8i codec, which can be used for codec2codec DAI links. This series first cleans up the DAPM component driver so there is an organized place to put the new widgets. Then it fills out the DAI driver, removing assumptions that were made for AIF1 (16 bits, 2 channels, certain clock inversions). Some new logic is required to handle 3 DAIs and the ADC/DAC sharing the same clock. Finally, it adds the new DAIs, and hooks them up with DAPM widgets and routes per the hardware topology. To minimize the number of patches in this series, related device tree patches (increasing #sound-dai-cells, adding new DAI links) will be sent separately. Samuel Holland (25): ASoC: sun8i-codec: Set up clock tree at probe time ASoC: sun8i-codec: Swap module clock/reset dependencies ASoC: sun8i-codec: Sort DAPM controls, widgets, and routes ASoC: sun8i-codec: Consistently name DAPM widgets and routes ASoC: sun8i-codec: Correct DAPM widget types ASoC: sun8i-codec: Fix AIF widget channel references ASoC: sun8i-codec: Enable AIF mono/stereo control ASoC: sun8i-codec: Use snd_soc_dai_get_drvdata ASoC: sun8i-codec: Prepare to extend the DAI driver ASoC: sun8i-codec: Program format before clock inversion ASoC: sun8i-codec: Enable all supported clock inversions ASoC: sun8i-codec: Program the correct word size ASoC: sun8i-codec: Round up the LRCK divisor ASoC: sun8i-codec: Correct the BCLK divisor calculation ASoC: sun8i-codec: Support the TDM slot binding ASoC: sun8i-codec: Enforce symmetric DAI parameters ASoC: sun8i-codec: Enable all supported sample rates ASoC: sun8i-codec: Automatically set the system sample rate ASoC: sun8i-codec: Constrain to compatible sample rates ASoC: sun8i-codec: Protect the clock rate while streams are open ASoC: sun8i-codec: Require an exact BCLK divisor match ASoC: sun8i-codec: Enable all supported PCM formats ASoC: sun8i-codec: Generalize AIF clock control ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF2 ASoC: sun8i-codec: Add a DAI, widgets, and routes for AIF3 sound/soc/sunxi/sun8i-codec.c | 1135 ++++++++++++++++++++++++++------- 1 file changed, 894 insertions(+), 241 deletions(-) -- 2.26.2
-
Mark Brown authored
Merge series "ASoC: Intel: sof_sdw: minor corrections" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This small patchset adds a missing component string needed by UCM and corrects a confusion on Realtek part numbers. Pierre-Louis Bossart (4): ASoC: Intel: sof_sdw_rt1308: add extra check on init ASoC: Intel: sof_sdw_rt1316: add missing component string ASoC: rt715-sdw: probe with RT714 Device ID ASoC: Intel: sof_sdw: add version_id to avoid rt714/rt715 confusion sound/soc/codecs/rt715-sdw.c | 1 + sound/soc/intel/boards/sof_sdw.c | 16 ++++++++++++++++ sound/soc/intel/boards/sof_sdw_rt1308.c | 4 ++++ sound/soc/intel/boards/sof_sdw_rt1316.c | 6 ++++++ 4 files changed, 27 insertions(+) -- 2.25.1
-
Tzung-Bi Shih authored
Supports jack detection for LINEOUT. Signed-off-by:
Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20201005074748.3394630-1-tzungbi@google.comSigned-off-by:
-
Codrin Ciubotariu authored
Use the helper function that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by:
-
Pierre-Louis Bossart authored
RT715 and RT714 are essentially the same chip. In addition, there are two versions, one supporting SoundWire 1.1 and one supporting SoundWire 1.2 (SDCA). The previous configurations assumed that RT714 was SDCA-only, which isn't correct. Add support for the 4 possible combinations to avoid confusions. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Jack Yu <jack.yu@realtek.com> Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Link: https://lore.kernel.org/r/20201002211902.287692-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
RT715 and RT714 are essentially the same chips but with different SoundWire Dev_ID registers, make sure we can probe the same driver if RT714 is used. Signed-off-by:
-
Pierre-Louis Bossart authored
Without this string UCM cannot fetch the relevant configurations. Fixes: b75bea4b ('ASoC: intel: sof_sdw: add rt711 rt1316 rt714 SDCA codec support') Signed-off-by:
-
Pierre-Louis Bossart authored
Apply same test as for other amplifiers - in case we enable feedback one day. Signed-off-by:
-
Samuel Holland authored
Remove a level of indirection by getting the device directly from the passed-in struct snd_soc_dai, instead of going through its component. Signed-off-by:
Samuel Holland <samuel@sholland.org> Acked-by:
Maxime Ripard <mripard@kernel.org> Link: https://lore.kernel.org/r/20201001021148.15852-9-samuel@sholland.orgSigned-off-by:
-
Samuel Holland authored
Each left/right pair of AIF input/output channels can be swapped or combined. This is useful for sending a mono audio source to both sides of a stereo sink, or for creating complex mixing scenarios. Add the support to control this feature from userspace. Signed-off-by:
-
Samuel Holland authored
Both the left and right side widgets referenced channel 0. This would unnecessarily power on the right side widget (and its associated path) when a mono stream was active. Signed-off-by:
-
Samuel Holland authored
Whie the aif_in and aif_out widget types are handled exactly the same in the core DAPM code, a future widget event hook will need the correct widget type to derive the associated substream. Clean up the widget type for that reason, and so these widgets will match newly-added widgets for the other AIFs. Signed-off-by:
-
Samuel Holland authored
This cleans up the mixer widget names. The AIF1 AD0 Mixer names were previously wrong -- they do not control the digital side of the ADC. The DAC mixer widgets were not wrong, but they were verbose and did not match the naming scheme of the other widgets. The mixer controls are not renamed because they are exposed to userspace. Signed-off-by:
-
Samuel Holland authored
Sort the remaining pieces of the DAPM driver so that they are all in the same order among controls/widgets/routes, and so they roughly match the register word and bit order of the hardware. This nicely separates the AIF-related widgets from the ADC/DAC widgets, which allows the AIF widgets to stay in a logical order as more AIFs are added to the driver. No widgets are renamed, to ease verification that this commit makes no functional change. Signed-off-by:
-
Samuel Holland authored
This matches the module power-up/down sequence from the vendor's driver. While updating these widgets/routes, reorder them to match the register and bit layout of the hardware. This puts them in the same place in the widget and route arrays (previously they were at opposite ends), and it makes it easier to track which parts of which registers are implemented. Signed-off-by:
-
Samuel Holland authored
The sun8i codec is effectively an on-die variant of the X-Powers AC100 codec. The AC100 can derive its clocks from either of two I2S master clocks or an internal PLL. For the on-die variant, Allwinner replaced the codec's own PLL with a connection to SoC's existing PLL_AUDIO, and they connected both I2S MCLK inputs to the same source -- which happens to be an integer divider from the same PLL_AUDIO. So there's actually no clocking flexibility. To run SYSCLK at the required rate, it must be run straight from the PLL. The only choice is whether it goes through AIF1CLK or AIF2CLK. Since both run at the same rate, the only effect of that choice is which field in SYS_SR_CTRL (AIF1_FS or AIF2_FS) controls the system sample rate. Since AIFnCLK is required to bring up the corresponding DAI, and AIF1 (connected to the CPU) is used most often, let's use AIF1CLK as the SYSCLK parent. That means we no longer need to set AIF2_FS. Since this clock tree never changes, we can program it from the component probe function, instead of using DAPM widgets. The DAPM widgets unnecessarily change clock parents when the codec goes in/out of idle and the supply widgets are powered up/down. Signed-off-by:
-
- 02 Oct, 2020 3 commits
-
-
Mark Brown authored
Merge series "Add driver for Microchip S/PDIF RX" from Codrin Ciubotariu <codrin.ciubotariu@microchip.com>: The Sony/Philips Digital Interface Receiver (SPDIFRX) is a serial port compliant with the IEC-60958 standard. Among its caracteristics, we mention the following: - SPDIF/AES-EBU Compatible Serial Port - 32 Samples FIFO - Data Width Configurable to 24 bits, 20 bits or 16 bits - Packed and Unpacked Data Support for System Memory Optimization - Line State Events Report and Source of Interrupt - Line Error Rate Report - Full Memory Map of 192 bits for Channel 1 and Channel 2 Status and User Data - First 32-bit Status A, Status B Change Report and Source of Interrupt - Line Digital Filter - Register Write Protection - Abnormal Software Access and Internal Sequencer Integrity Check Reports This interface is available in Microchip's SAMA7G5 SoC. Codrin Ciubotariu (2): dt-bindings: sound: add DT bindings for Microchip S/PDIF RX Controller ASoC: mchp-spdifrx: add driver for SPDIF RX .../bindings/sound/mchp,spdifrx.yaml | 73 ++ sound/soc/atmel/Kconfig | 13 + sound/soc/atmel/Makefile | 2 + sound/soc/atmel/mchp-spdifrx.c | 954 ++++++++++++++++++ 4 files changed, 1042 insertions(+) create mode 100644 Documentation/devicetree/bindings/sound/mchp,spdifrx.yaml create mode 100644 sound/soc/atmel/mchp-spdifrx.c -- 2.25.1
-
Christophe JAILLET authored
It is likely that this header file is about the WM8523. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201002165908.637809-1-christophe.jaillet@wanadoo.frSigned-off-by:
-
Mark Brown authored
Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
