Add the comedi "chan" number to the encoder private data so we can then
remove some of the members of the private data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Start cleaning up the 'struct s626_enc_info' by redefining the my_cra
and my_crb members based on the comedi channel number.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On moving the function into the driver proper, also check the device is
asserting the shared interrupt line.

This patch also fixes the interrupt handling for the digital input
change-of-state interrupts.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This board supports an interrupt that can be generated by an AND/OR
combination of 16 of the input channels.

Create a separate subdevice to handle this interrupt.

The apci1564_di_config() function is used to configure which
inputs are used to generate the interrupt. Currently this function
is broken since it does not follow the comedi API for insn_config
functions. Fix this function by implementing the config instruction
INSN_CONFIG_DIGITAL_TRIG.

Add the remaining subdevice operations necessary for the interrupt
subdevice to support async commands.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The addi_private struct defined in addi-data/addi_common.h is very bloated
and contains many fields which addi_apci_1564 does not require.  In the
interest of eventually removing this driver's dependency on
addi_common.h, we can create a private data struct specifically for
addi_apci_1564 containing only the fields it will actually use.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The global variables ui_InterruptStatus_1564 and ui_InterruptData are both
set but never used.  Just remove them from the driver.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the private data struct is only set at one location in the
entire driver, and then never even used for anything.  Let's just remove
its use.
Signed-off-by: Chase Southwood <chase.southwood@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: H Hartley Sweeeten <hsweeten@visionengravers.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DT2821 series board have jumpers that set the output range for
the two Analog Output channels. The range_table for the Analog Output
subdevice provides all possible ranges to the user. When a unipolar
range is selected the board expects the data to be in a straight
binary format. When a bipolar range is select the data should be in
two's complement format.

Currently, the user passes some configuration options when attaching
to the driver to select the data format for each channel. If the
user does not pass the config options, the data format is assumed to
be straight binary.

The Analog Output subdevice now has a range_table that provides the
user will all possible ranges. Use the range information to determine
if the data values need to be munged into two's complememnt values
and deprecate the config options.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The direction of the 16 DIO channels is controlled with two bits in the
DACSR register. The HBOE bit controls the direction of channels 15-8 and
the LBOE bit channels 7-0.

The DACSR register is also used to control the Analog Output async command
support. Currently, starting or canceling an Analog Output command would
also reset the DIO directions so that all channels were inputs.

Fix the driver so that the DIO direction is not changed when starting or
canceling an Analog Output async command.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, rename the register map defines so that the bit defines
are associated with the registers. Also, convert all the bit defines into
bit-shifts to make them clear.

Remove all the verbose comments. All the registers and bits are named
according to the User Manual for the DT2821 Series, Document UM-05073-G.
That manual can be checked if necessary for the verbose information.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A common timer is used for analog input and output async commands. The
(*do_cmdtest) for both subdevices calculates the divisor as part of
Step 4 when validating the trigger arguments. The divisor is calculated
again in the (*do_cmd) for both subdevices in order to set the timer.

The comedi core only calls the (*do_cmd) is called after a successful
(*do_cmdtest). Save the divisor from the (*do_cmdtest) in the private
data and use that value in the (*do_cmd).

The extra check of the cmd->convert_arg in dt282x_ai_cmd() is not necessary.
The convert_arg was already checked in the (*do_cmdtest), and it's not used
in the (*do_cmd).

Tidy up dt282x_ns_to_timer(), the parameters are all unsigned int's and the
mask of the 'flags' can be moved here to simplify the callers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tidy up the multi-line comments at the beginning of the file to follow
the CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The DT2821 series boards do not have programmable analog output ranges.
The range is set, per-channel, with jumpers on the board.

Currently the user has to pass some configuration options when attaching
to the driver in order to set the range for each channel. If they do not
pass the range options they will default to 0. If they pass an invalid
range option they will also default to 0. The 0 range option is bipolar
10V. If the user passes a range option that does not match the hardware
setting it doesn't cause any problems in the driver it just causes the
user space comedilib library to incorrectly convert the hardware values
to physical values.

Make the attach a bit simpler by deprecating these options and providing
a range table with all the valid ranges for the analog outputs. The user
can then select the correct range when they use the comedilib functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Most of the boards supported by this driver can do either single-ended or
differential Analog Input but there are a couple that can only do one or
the other. On the boards that can do both the type of input is set with
jumpers on the board.

The 'it->options[4]' passed by the user during the board (*attach) is used
to determine how the Analog Inputs are configured. This is used to set
the subdevice flags and number of channels correctly.

Fix the check of this option so that it only applies when the board can
actually do differential input. Also, default to differential inputs if
that is the only mode the board supports.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Analog Input subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Analog Output subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This enum is used to index the 'options' values that are passed
by the user attaches to the driver. These options are identified
in the comedi comment block.

For aesthetics, remove the enum and just open code the index values.

Refactor the Analog Input subdevice init so that the it->options[4],
indicating differential inputs, does not have to be checked multiple
times.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, factor the code that initializes the then checks to see
if it is actually a DT2821 series board out of the (*attach).

For clarity, remove the MASK and VAL defines used to check the board and
jsut open code the values.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core expects the (*insn_read) functions to return 'insn->n'
samples. Fix this function to work like the core expects.

For aesthetics, rename the private data 'ao' member to clarify its
use. Also, remove the unnecessary comment.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The main interrupt handler already has the comedi_subdevice pointer
needed in this function. Pass that subdevice pointer so that it does
not need to be fetched as a local variable.

Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The main interrupt handler already has the comedi_subdevice pointer
needed in this function. Pass that subdevice pointer so that it does
not need to be fetched as a local variable.

Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The comedi core sanity checks that the subdevice has a buffer allocated
before allowing an async command to start. The helper functions in comedi_buf
will also sanity check the buffer as a side effect of the 'alloc' helpers
with reading or writing data for the buffer.

Remove the unnecessary sanity checks in the ai/ao dma interrupt handlers.
This will allow the handlers to disable the dma and then fail when they
try to read/write the buffer. Currently dma is left enabled due to the
sanity checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For aesthetics, add some whitespace to the Digital I/O subdevice init.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Rename these functions so they have namespace associated with the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This macro is not used in the driver. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Convert the '2scomp' flags in the private data into bit-fields to save
a bit of space.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This define is only used in the comedi_request_region() call to specify
the size of the I/O region. Remove it and just open code the value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This driver requires an IRQ and 2 DMA channels in order to execute async
commands.

Modify the (*attach) so that command support is only hooked up if
DMA is available. This allows removing the extra checks in the
command support functions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As indicated by checkpatch.pl, "WARNING: Use of volatile is usually
wrong: ...". The variables in the private data that are marked
volatile don't need to be. Remove the volatile.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The (*insn_write) functions are expected to write 'insn->n' samples to the
hardware. Fix this function so it works like the comedi core expects.

The comedi core sanity checks that the samples are within the 'maxdata' range
of the subdevice before calling the (*insn_write) so this function does not
need to mask each sample by 's->maxdata'.

Also, the wrong '*2scomp' flag in the private data was being checked to see
if the sample needs to be munged before being written. Fix this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is the number of bits in the analog output data.
Convert this member into the subdevice 'maxdata', (1 << board->dabits) - 1,
to avoid needing to do the calculation.

Use the subdevice 'maxdata' in the driver instead of using the boardinfo and
use the comedi_offset_munge() helper to convert the two's complement data to
the offset binary form that the comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This member of the boardinfo is the number of bits in the analog input data.
Convert this member into the subdevice 'maxdata', (1 << board->adbits) - 1,
to avoid needing to do the calculation.

Use the subdevice 'maxdata' in the driver instead of using the boardinfo and
use the comedi_offset_munge() helper to convert the two's complement data to
the offset binary form that the comedi core expects.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

All unlisted members in the boardinfo declaraction will default to '0'.
Remove the unnecessary code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For asethetics, move the boardinfo declaration closer to the struct
definition.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Move some of the functions to remove the need for the forward
declarations.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Introduce an inline helper to return the number of bytes that are
ready to read from the comedi_async buffer. Use the helper in the
comedi drivers that currently do the calculation as part of the
(*poll) operation.

Also, use the helper in comedi_fops where the calculation is used as
part of the subdevice going nonbusy.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

As pointed out by Ian Abbott, the INSN_CONFIG_SET_CLOCK_SRC options should
be exposed in the user header comedi.h.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch removes a test in error handling code by adding a return
path.

The Coccinelle semantic match that found the problem is:

// <smpl>
@@
expression E,E1,E2;
@@

E = alloc_etherdev(...)
... when != E = E1
if (...) { ... free_netdev(E); ... return ...; }
... when != E = E2
(
  if (...)
   {
   ... when != free_netdev(E);
   return dev; }
|
* if (...)
   {
   ... when != free_netdev(E);
   return ...; }
|
register_netdev(E)
)

// </smpl>
Signed-off-by: Himangi Saraogi <himangi774@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

A struct member variable is set to the same value more than once

This was found using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>