- 18 Apr, 2013 8 commits
-
-
Andre Guedes authored
This patch renames LE_SCANNING_ENABLED and LE_SCANNING_DISABLED macros to LE_SCAN_ENABLE and LE_SCAN_DISABLE in order to keep the same prefix others LE scan macros have. It also fixes le_scan_enable_req function so it uses the LE_SCAN_ ENABLE macro instead of a magic number. Signed-off-by:
Andre Guedes <andre.guedes@openbossa.org> Acked-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk>
-
Andre Guedes authored
This patch adds macros for filter_duplicates parameter values from HCI LE Set Scan Enable command. It also fixes le_scan_enable_req function so it uses the LE_SCAN_FILTER_DUP_ENABLE macro instead of a magic number. The LE_SCAN_FILTER_DUP_DISABLE was also defined since it will be required to properly support the GAP Observer Role. Signed-off-by:
-
Andre Guedes authored
This patch adds macros for active and passive LE scan type values. The LE_SCAN_PASSIVE was also defined since it will be used in future by LE connection routine and GAP Observer Role support. Signed-off-by:
-
Andre Guedes authored
Define LE scanning timeout macros in jiffies just like we do for others timeout macros. Signed-off-by:
-
Johan Hedberg authored
With the introduction of CSA4 there is now also a features page number 2 available. This patch increments the maximum supported page number to 2 and adds code for reading all available pages (as long as we have support for them - indicated by HCI_MAX_PAGES). Signed-off-by:
-
Johan Hedberg authored
The local and remote features are organized by page number. Page 0 are the LMP features, page 1 the host features, and any pages beyond 1 features that future core specification versions may define. So far we've only had the first two pages and two separate variables has been convenient enough, however with the introduction of Core Specification Addendum 4 there are features defined on page 2. Instead of requiring the addition of a new variable each time a new page number is defined, this patch refactors the code to use a single table for the features. The patch needs to update both the hci_dev and hci_conn structures since there are macros that depend on the features being represented in the same way in both of them. Signed-off-by:
-
Frédéric Dalleau authored
Since this function is only used by sco, move it from hci_event.c to sco.c and rename to sco_conn_defer_accept. Make it static. Signed-off-by:
Frédéric Dalleau <frederic.dalleau@linux.intel.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Jaganath Kanakkassery authored
Some faulty non SSP devices send extended inquiry response during device discovery which is a violation of 2.1 specification. So for these devices we set SSP bit during acl connection initiation thinking that it is an SSP device. But for these devices, in remote host features event SSP supported bit will be off. But we are not clearing the SSP bit in that case and eventually SSP bit in conn flag will be incorrectly set for these devices. The software which has caused this issue is MecApp http://www.mecel.se/products/bluetooth/downloads/MecApp_download This patch does a workaround by clearing the SSP bit if it is not supported in remote host features event hcidump log ---------- < HCI Command: Inquiry (0x01|0x0001) plen 5 lap 0x9e8b33 len 4 num 0 > HCI Event: Command Status (0x0f) plen 4 Inquiry (0x01|0x0001) status 0x00 ncmd 1 > HCI Event: Extended Inquiry Result (0x2f) plen 255 bdaddr 00:1B:DC:05:B5:25 mode 1 clkoffset 0x3263 class 0x3c0000 rssi -77 Unknown type 0x42 with 8 bytes data Unknown type 0x1e with 2 bytes data > HCI Event: Inquiry Complete (0x01) plen 1 status 0x00 < HCI Command: Create Connection (0x01|0x0005) plen 13 bdaddr 00:1B:DC:05:B5:25 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > HCI Event: Command Status (0x0f) plen 4 Create Connection (0x01|0x0005) status 0x00 ncmd 1 > HCI Event: Connect Complete (0x03) plen 11 status 0x00 handle 12 bdaddr 00:1B:DC:05:B5:25 type ACL encrypt 0x00 < HCI Command: Read Remote Supported Features (0x01|0x001b) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Read Remote Supported Features (0x01|0x001b) status 0x00 ncmd 1 > HCI Event: Read Remote Supported Features (0x0b) plen 11 status 0x00 handle 12 Features: 0xff 0xff 0x8f 0x7e 0xd8 0x1f 0x5b 0x87 < HCI Command: Read Remote Extended Features (0x01|0x001c) plen 3 handle 12 page 1 > HCI Event: Command Status (0x0f) plen 4 Read Remote Extended Features (0x01|0x001c) status 0x00 ncmd 1 > HCI Event: Page Scan Repetition Mode Change (0x20) plen 7 bdaddr 00:1B:DC:05:B5:25 mode 1 > HCI Event: Max Slots Change (0x1b) plen 3 handle 12 slots 5 > HCI Event: Read Remote Extended Features (0x23) plen 13 status 0x00 handle 12 page 1 max 0 Features: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 < HCI Command: Remote Name Request (0x01|0x0019) plen 10 bdaddr 00:1B:DC:05:B5:25 mode 2 clkoffset 0x0000 > HCI Event: Command Status (0x0f) plen 4 Remote Name Request (0x01|0x0019) status 0x00 ncmd 1 > HCI Event: Remote Name Req Complete (0x07) plen 255 status 0x00 bdaddr 00:1B:DC:05:B5:25 name 'Bluetooth PTS Radio v4' < HCI Command: Authentication Requested (0x01|0x0011) plen 2 handle 12 > HCI Event: Command Status (0x0f) plen 4 Authentication Requested (0x01|0x0011) status 0x00 ncmd 1 > HCI Event: Link Key Request (0x17) plen 6 bdaddr 00:1B:DC:05:B5:25 < HCI Command: Link Key Request Negative Reply (0x01|0x000c) plen 6 bdaddr 00:1B:DC:05:B5:25 > HCI Event: Command Complete (0x0e) plen 10 Link Key Request Negative Reply (0x01|0x000c) ncmd 1 status 0x00 bdaddr 00:1B:DC:05:B5:25 > HCI Event: PIN Code Request (0x16) plen 6 bdaddr 00:1B:DC:05:B5:25 Signed-off-by:
Jaganath Kanakkassery <jaganath.k@samsung.com> Signed-off-by:
-
- 17 Apr, 2013 15 commits
-
-
David Herrmann authored
According to the specifications, data output reports must be sent on the interrupt channel. See also usbhid implementation. Sending these reports on the control channel breaks newer Wii Remotes. Note that this will make output reports asynchronous. However, that's how hid_output_raw_report() is supposed to work with HID_OUTPUT_REPORT as report type. There are no responses to output reports. Signed-off-by:
David Herrmann <dh.herrmann@gmail.com> Acked-by:
-
David Herrmann authored
If a device is registered as HID device, it is always in Report-Mode. Therefore, we must not send Boot-Protocol messages on hidinput_input_event() callbacks. This confuses devices and may cause disconnects on protocol errors. We disable the hidinput_input_event() callback for now. We can implement it properly later, but lets first fix the current code by disabling it. Signed-off-by:
-
David Herrmann authored
We handle skb buffers all over the place, even though we have hidp_send_*_message() helpers. This creates a more generic hidp_send_message() helper and uses it instead of dealing with transmit queues directly everywhere. Signed-off-by:
-
David Herrmann authored
Both hidp_process_ctrl_transmit() and hidp_process_intr_transmit() are exactly the same apart from the transmit-queue and socket pointers. Therefore, pass them as argument and merge both functions into one so we avoid 25 lines of code-duplication. Signed-off-by:
-
David Herrmann authored
We shouldn't push back the skbs if kernel_sendmsg() fails. Instead, we terminate the connection and drop the skb. Only on EAGAIN we push it back and return. l2cap doesn't return EAGAIN, yet, but this guarantees we're safe if it will at some time in the future. Signed-off-by:
-
David Herrmann authored
We have the full new session-management now available so lets switch over and remove all the old code. Few semantics changed, so we need to adjust the sock.c callers a bit. But this mostly simplifies the logic. Signed-off-by:
-
David Herrmann authored
This is a rewrite of the HIDP session management. It implements HIDP as an l2cap_user sub-module so we get proper notification when the underlying connection goes away. The helpers are not yet used but only added in this commit. The old session management is still used and will be removed in a following patch. The old session-management was flawed. Hotplugging is horribly broken and we have no way of getting notified when the underlying connection goes down. The whole idea of removing the HID/input sub-devices from within the session itself is broken and suffers from major dead-locks. We never can guarantee that the session can unregister itself as long as we use synchronous shutdowns. This can only work with asynchronous shutdowns. However, in this case we _must_ be able to unregister the session from the outside as otherwise the l2cap_conn object might be unlinked before we are. The new session-management is based on l2cap_user. There is only one way how to add a session and how to delete a session: "probe" and "remove" callbacks from l2cap_user. This guarantees that the session can be registered and unregistered at _any_ time without any synchronous shutdown. On the other hand, much work has been put into proper session-refcounting. We can unregister/unlink the session only if we can guarantee that it will stay alive. But for asynchronous shutdowns we never know when the last user goes away so we must use proper ref-counting. The old ->conn field has been renamed to ->hconn so we can reuse ->conn in the new session management. No other existing HIDP code is modified. Signed-off-by:
-
David Herrmann authored
Several sub-modules like HIDP, rfcomm, ... need to track l2cap connections. The l2cap_conn->hcon->dev object is used as parent for sysfs devices so the sub-modules need to be notified when the hci_conn object is removed from sysfs. As submodules normally use the l2cap layer, the l2cap_user objects are registered there instead of on the underlying hci_conn object. This avoids any direct dependency on the HCI layer and lets the l2cap core handle any specifics. This patch introduces l2cap_user objects which contain a "probe" and "remove" callback. You can register them on any l2cap_conn object and if it is active, the "probe" callback will get called. Otherwise, an error is returned. The l2cap_conn object will call your "remove" callback directly before it is removed from user-space. This allows you to remove your submodules _before_ the parent l2cap_conn and hci_conn object is removed. At any time you can asynchronously unregister your l2cap_user object if your submodule vanishes before the l2cap_conn object does. There is no way around l2cap_user. If we want wire-protocols in the kernel, we always want the hci_conn object as parent in the sysfs tree. We cannot use a channel here since we might need multiple channels for a single protocol. But the problem is, we _must_ get notified when an l2cap_conn object is removed. We cannot use reference-counting for object-removal! This is not how it works. If a hardware is removed, we should immediately remove the object from sysfs. Any other behavior would be inconsistent with the rest of the system. Also note that device_del() might sleep, but it doesn't wait for user-space or block very long. It only _unlinks_ the object from sysfs and the whole device-tree. Everything else is handled by ref-counts! This is exactly what the other sub-modules must do: unlink their devices when the "remove" l2cap_user callback is called. They should not do any cleanup or synchronous shutdowns. Signed-off-by:
-
David Herrmann authored
If we want to use l2cap_conn outside of l2cap_core.c, we need refcounting for these objects. Otherwise, we cannot synchronize l2cap locks with outside locks and end up with deadlocks. Hence, introduce ref-counting for l2cap_conn objects. This doesn't affect l2cap internals at all, as they use a direct synchronization. We also keep a reference to the parent hci_conn for locking purposes as l2cap_conn depends on this. This doesn't affect the connection itself but only the lifetime of the (dead) object. Signed-off-by:
-
David Herrmann authored
There is no reason to keep this helper in the header file. No other file depends on it so move it into hidp/core.c where it belongs. Signed-off-by:
-
David Herrmann authored
There is no reason to require the source arguments to be writeable so fix this to allow constant source addresses. Signed-off-by:
-
David Herrmann authored
The "terminate" flag is guaranteed to be set before the session terminates and the handlers are woken up. Hence, we need to add it to the sleep-condition. Note that testing the flags is not enough as nothing prevents us from setting the flags again after the session-handler terminated. Signed-off-by:
-
David Herrmann authored
This field is always BT_CONNECTED. Remove it and set it to BT_CONNECTED in hidp_copy_session() unconditionally. Also note that this field is totally bogus. Userspace can query an hidp-session for its state. However, whenever user-space queries us, this field should be BT_CONNECTED. If it wasn't BT_CONNECTED, then we would be currently cleaning up the session and the session itself would exit in the next few milliseconds. Hence, there is no reason to let user-space know that the session will exit now if they cannot make _any_ use of that. Thus, remove the field and let user-space think that a session is always BT_CONNECTED as long as they can query it. Signed-off-by:
-
David Herrmann authored
We currently do not allow using hci_conn from outside of HCI-core. However, several other users could make great use of it. This includes HIDP, rfcomm and all other sub-protocols that rely on an active connection. Hence, we now introduce hci_conn ref-counting. We currently never call get_device(). put_device() is exclusively used in hci_conn_del_sysfs(). Hence, we currently never have a greater device-refcnt than 1. Therefore, it is safe to move the put_device() call from hci_conn_del_sysfs() to hci_conn_del() (it's the only caller). In fact, this even fixes a "use-after-free" bug as we access hci_conn after calling hci_conn_del_sysfs() in hci_conn_del(). From now on we can add references to hci_conn objects in other layers (like l2cap_sock, HIDP, rfcomm, ...) and grab a reference via hci_conn_get(). This does _not_ guarantee, that the connection is still alive. But, this isn't what we want. We can simply lock the hci_conn device and use "device_is_registered(hci_conn->dev)" to test that. However, this is hardly necessary as outside users should never rely on the HCI connection to be alive, anyway. Instead, they should solely rely on the device-object to be available. But if sub-devices want the hci_conn object as sysfs parent, they need to be notified when the connection drops. This will be introduced in later patches with l2cap_users. Signed-off-by:
-
David Herrmann authored
hci_conn_hold/put_device() is used to control when hci_conn->dev is no longer needed and can be deleted from the system. Lets first look how they are currently used throughout the code (excluding HIDP!). All code that uses hci_conn_hold_device() looks like this: ... hci_conn_hold_device(); hci_conn_add_sysfs(); ... On the other side, hci_conn_put_device() is exclusively used in hci_conn_del(). So, considering that hci_conn_del() must not be called twice (which would fail horribly), we know that hci_conn_put_device() is only called _once_ (which is in hci_conn_del()). On the other hand, hci_conn_add_sysfs() must not be called twice, either (it would call device_add twice, which breaks the device, see drivers/base/core.c). So we know that hci_conn_hold_device() is also called only once (it's only called directly before hci_conn_add_sysfs()). So hold and put are known to be called only once. That means we can safely remove them and directly call hci_conn_del_sysfs() in hci_conn_del(). But there is one issue left: HIDP also uses hci_conn_hold/put_device(). However, this case can be ignored and simply removed as it is totally broken. The issue is, the only thing HIDP delays with hci_conn_hold_device() is the removal of the hci_conn->dev from sysfs. But, the hci_conn device has no mechanism to get notified when its own parent (hci_dev) gets removed from sysfs. hci_dev_hold/put() does _not_ control when it is removed but only when the device object is created and destroyed. And hci_dev calls hci_conn_flush_*() when it removes itself from sysfs, which itself causes hci_conn_del() to be called, but it does _not_ cause hci_conn_del_sysfs() to be called, which is wrong. Hence, we fix it to call hci_conn_del_sysfs() in hci_conn_del(). This guarantees that a hci_conn object is removed from sysfs _before_ its parent hci_dev is removed. The changes to HIDP look scary, wrong and broken. However, if you look at the HIDP session management, you will notice they're already broken in the exact _same_ way (ever tried "unplugging" HIDP devices? Breaks _all_ the time). So this patch only makes HIDP look _scary_ and _obviously broken_. It does not break HIDP itself, it already is! See later patches in this series which fix HIDP to use proper session-management. Signed-off-by:
-
- 11 Apr, 2013 7 commits
-
-
Claudio Takahasi authored
This patch sends Reject Synchronous Connection Request Command when hci_conn_timeout is triggered, and the SCO connection is in BT_CONNECT2 state. It prevents inconsistency if the remote host doesn't implement properly the timeout for the connection request, and it removes the connection reference left when the socket is closed for incoming SCO connections. [ 2650.129080] sco_sock_release: sock ffff8801ca417400, sk ffff88020c408800 [ 2650.129092] sco_sock_clear_timer: sock ffff88020c408800 state 6 [ 2650.129101] __sco_sock_close: sk ffff88020c408800 state 6 socket ffff8801ca417400 [ 2650.129108] sco_chan_del: sk ffff88020c408800, conn ffff8801c650ea20, err 104 [ 2650.129114] hci_conn_put: hcon ffff88020c40a800 orig refcnt 1 [ 2650.129128] sco_sock_kill: sk ffff88020c408800 state 9 [ 2650.129135] sco_sock_destruct: sk ffff88020c408800 [ 2650.138468] hci_conn_timeout: hcon ffff88020c40a800 state BT_CONNECT2 Signed-off-by:
Claudio Takahasi <claudio.takahasi@openbossa.org> Signed-off-by:
Vinicius Costa Gomes <vinicius.gomes@openbossa.org> Signed-off-by:
-
Claudio Takahasi authored
This patch removes the status parameter of the l2cap_conn_add function. The parameter 'status' is always 0. Signed-off-by:
-
Claudio Takahasi authored
This patch removes unneeded initialization and empty line. Signed-off-by:
-
Claudio Takahasi authored
This patch changes the memory allocation flags in the sco_conn_add function, replacing the type to GFP_KERNEL. This function is executed in process context and it is not called inside an atomic section. Signed-off-by:
-
Claudio Takahasi authored
This patch fixes decrementing SCO connection reference right after stablishing the SCO connection with defer setup enabled. The dump below shows a disconnection command with handle 0, the connection is still in BT_CONNECT2 state and there isn't a handle associated with it. < HCI Command: Accept Synchronous Connection (0x01|0x0029) plen 21 bdaddr 78:47:1D:B3:72:6C > HCI Event: Command Status (0x0f) plen 4 Accept Synchronous Connection (0x01|0x0029) status 0x00 ncmd 1 < HCI Command: Disconnect (0x01|0x0006) plen 3 handle 0 reason 0x13 Reason: Remote User Terminated Connection > HCI Event: Command Status (0x0f) plen 4 Disconnect (0x01|0x0006) status 0x00 ncmd 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 status 0x00 handle 46 bdaddr 78:47:1D:B3:72:6C type eSCO Air mode: CVSD < SCO data: handle 46 flags 0x00 dlen 48 Signed-off-by:
-
David Herrmann authored
We use _get() and _put() for device ref-counting in the kernel. However, hci_conn_put() is _not_ used for ref-counting, hence, rename it to hci_conn_drop() so we can later fix ref-counting and introduce hci_conn_put(). hci_conn_hold() and hci_conn_put() are currently used to manage how long a connection should be held alive. When the last user drops the connection, we spawn a delayed work that performs the disconnect. Obviously, this has nothing to do with ref-counting for the _object_ but rather for the keep-alive of the connection. But we really _need_ proper ref-counting for the _object_ to allow connection-users like rfcomm-tty, HIDP or others. Signed-off-by:
-
Marcel Holtmann authored
Trying to squeeze every single vendor setup routine into the same function and have it assigned all the time is actually a bad idea. Especially since the core can handle the absence of a setup routine perfectly fine. To make this a lot simpler for future additions of vendor setup code, split the BCM92035 setup into its own function and only assign it when this specific device has been detected. Doing it like this has the nice side benefit that we do not have to keep a copy of the driver_info around. Signed-off-by:
-
- 06 Apr, 2013 2 commits
-
-
David Herrmann authored
We need to verify that the given sockets actually are l2cap sockets. If they aren't, we are not supposed to access bt_sk(sock) and we shouldn't start the session if the offsets turn out to be valid local BT addresses. That is, if someone passes a TCP socket to HIDCONNADD, then we access some random offset in the TCP socket (which isn't even guaranteed to be valid). Fix this by checking that the socket is an l2cap socket. Signed-off-by:
-
David Herrmann authored
We print this error twice in the first error-path so remove it. One error message is enough. Signed-off-by:
-
- 04 Apr, 2013 8 commits
-
-
Marcel Holtmann authored
The driver init queue is no longer needed. This can be all handled inside the drivers now. So remove it. Signed-off-by:
-
Marcel Holtmann authored
With the early init stage during setup, this quirk can be simplified and kept fully inside the driver. Signed-off-by:
-
Marcel Holtmann authored
Some drivers require a special stage for their early init. This is always specific to the driver or transport. So call back into driver to allow bringing up the device. The advantage with this stage is that the Bluetooth core is actually handling the HCI layer now. This means that command and event processing is available. Signed-off-by:
-
Johan Hedberg authored
This patch adds a __hci_cmd_sync_ev function, analogous to __hci_cmd_sync except that it also takes an event parameter to indicate that the command completes with a special event instead of command complete. Internally this new function takes advantage of the hci_req_add_ev function introduced in the previous patch. The primary expected user of this new function are the setup routines of HCI drivers which may want to send custom commands and return only when they have completed. Signed-off-by:
-
Johan Hedberg authored
This patch adds support for having commands within HCI requests that do not result in a command complete but some other event. This is at least needed for some vendor specific commands to be issued in the hdev->setup() procecure, but might also be useful for other commands. The way that the support is implemented is by extending the skb control buffer to have a field to indicate that the command is expected to terminate with a special event. After sending the command each received event can then be compared against this field through hdev->sent_cmd. Signed-off-by:
-
Johan Hedberg authored
This patch adds a helper function for sending a single HCI command waiting for its completion and then returning back the parameters in the resulting command complete event (if there was one). The implementation is very similar to that of hci_req_sync() except that instead of invocing a callback for sending HCI commands the function constructs and sends one itself and after being woken up picks the last received event from hdev->recv_evt (if it matches the right criteria) and returns it. Signed-off-by:
-
Johan Hedberg authored
This patch adds tracking of received HCI events to the hci_dev struct. This is necessary so that a subsequent patch can implement a function for sending a single command synchronously and returning the resulting command complete parameters in the function return value. Signed-off-by:
-
Chan-yeol Park authored
This patch removes redundant whitespace from the HCI ldisc driver. Signed-off-by:
Chan-yeol Park <chanyeol.park@samsung.com> Signed-off-by:
-
