This is a preparation patch for adding support for Intel INT33D3
ACPI devices. These INT33D3 devices follow yet another Intel defined
(but not documented) ACPI GPIO button standard.

Unlike the ACPI GPIO button devices supported so far, the GPIO used in
the INT33D3 devices is active-high, rather then active-low.

This commit makes setting the gpio_keys_button.active_low flag
configurable through the soc_button_info struct and enables it for all
currently supported devices.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200826150601.12137-2-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Commit 696c6523 ("platform/x86: thinkpad_acpi: add mapping for new
hotkeys") added support for a bunch of new hotkeys, but the
clipping/snipping tool hotkey got ignored because there was no good
key-code to map it to.

Recently a new KEY_SELECTIVE_SCREENSHOT keycode was added by commit
3b059da9 ("Input: allocate keycode for "Selective Screenshot" key")
quoting from the commit message:

"New Chrome OS keyboards have a "snip" key that is basically a selective
screenshot (allows a user to select an area of screen to be copied).
Allocate a keycode for it."

Support for this "snip" key seems like it is also a good match for the
clipping/snipping tool hotkey, so map this hotkey to the new
KEY_SELECTIVE_SCREENSHOT key-code.
Reviewed-by: Bastien Nocera <hadess@hadess.net>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200908135147.4044-5-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1
models have 3 new symbols / shortcuts on their F9-F11 keys (and the
thinkpad_acpi driver receives 3 new hkey events for these):

F9:  Has a symbol resembling a rectangular speech balloon, the manual says
     the hotkey functions shows or hides the notification center
F10: Has a symbol of a telephone horn which has been picked up from the
     receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
     the manual says: "Decline incoming calls"

And these Thinkpad models also send a new 0x1316 hkey events when the
Fn + right Shift key-combo is pressed.

This commit adds support for these 4 new hkey events.
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200908135147.4044-4-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The last 2 generations of Lenovo Thinkpads send an acpi_thinkpad event when
Fn + right shift is pressed.  This is intended for use with "Lenovo Quick
Clean" software, which disables the touchpad + kbd for 2 minutes on this
key-combo so that healthcare workes can disinfect it.

But there is no silkscreen print on the right-keyboard to indicate this,
so add a KEY_FN_RIGHT_SHIFT keycode define to use for this key-combo.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20200908135147.4044-3-hdegoede@redhat.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

New Lenovo Thinkpad models, e.g. the X1 Carbon 8th gen and the new T14 gen1
models have 3 new symbols / shortcuts on their F9-F11 keys (and the
thinkpad_acpi driver receives 3 new "scancodes" for these):

F9:  Has a symbol resembling a rectangular speech balloon, the manual says
     the hotkey functions shows or hides the notification center
F10: Has a symbol of a telephone horn which has been picked up from the
     receiver, the manual says: "Answer incoming calls"
F11: Has a symbol of a telephone horn which is resting on the receiver,
     the manual says: "Decline incoming calls"

We have no existing keycodes which are a good match for these, so
add 3 new keycodes for these.

I noticed that we have a hole in our keycodes between 0x1ba and 0x1c0
which does not seem to be reserved for any specific purpose, so these
new 3 codes use 0x1bc - 0x1be, instead of starting at 0x27b.
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Use semicolons and braces.
Signed-off-by: Joe Perches <joe@perches.com>
Link: https://lore.kernel.org/r/02cb394f8c305473c1a783a5ea8425de79fe0ec1.1598331149.git.joe@perches.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Expose model and fw_version via sysfs. Also query the model
in probe to make sure, that the I2C communication with the
device works before successfully probing the driver.

This is a bit complicated, since EETI devices do not have
a sync interface. Sending the commands and directly reading
does not work. Sending the command and waiting for some time
is also not an option, since there might be touch events in
the mean time.

Last but not least we do not cache the results, since this
interface can be used to check the I2C communication is still
working as expected.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20200805160520.456570-5-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Add basic support for an optional reset gpio.
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-4-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds support for EXC80H60 and EXCH84 controllers, which
use a different event type id and have two extra bits for the
resolution (so the maximum is 16K instead of 4K).
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-3-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Convert the EETI EXC3000 binding to DT schema format using json-schema
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200805160520.456570-2-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently when the call to fsp_reg_write fails -EIO is not being returned
because the count is being returned instead of the return value in retval.
Fix this by returning the value in retval instead of count.

Addresses-Coverity: ("Unused value")
Fixes: fc69f4a6 ("Input: add new driver for Sentelic Finger Sensing Pad")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603141218.131663-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The variable ret is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603135742.130852-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Currently the assignment of -ENOMEM to error is redundant because error
is not being read and -ENOMEM is being hard coded as an error return.
Fix this by returning the error code in variable 'error'; this also
allows the error code from a failed call to input_register_device to
be preserved and returned to the caller rather than just returning
a possibly inappropriate -ENOMEM.

Kudos to Dan Carpenter for the suggestion of an improved fix.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200603152151.139337-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The update firmware flow of ic type 0x15 is same with ic type 0x14.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Link: https://lore.kernel.org/r/20200730060526.12439-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The workaround of reading all messages until an invalid is received is a
way of forcing the CHG line high, which means that when using
edge-triggered interrupts the interrupt can be acquired.

With level-triggered interrupts the workaround is unnecessary.

Also, most recent maXTouch chips have a feature called RETRIGEN which, when
enabled, reasserts the interrupt line every cycle if there are messages
waiting. This also makes the workaround unnecessary.

Note: the RETRIGEN feature is only in some firmware versions/chips, it's
not valid simply to enable the bit.
Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk>
Acked-by: Benson Leung <bleung@chromium.org>
Acked-by: Yufeng Shen <miletus@chromium.org>
(cherry picked from ndyer/linux/for-upstream commit 1ae4e8281e491b22442cd5acdfca1862555f8ecb)
[gdavis: Fix conflicts due to v4.6-rc7 commit eb43335c ("Input:
	 atmel_mxt_ts - use mxt_acquire_irq in mxt_soft_reset").]
Signed-off-by: George G. Davis <george_davis@mentor.com>
[jiada: reset use_retrigen_workaround at beginning of mxt_check_retrigen()
	call mxt_check_retrigen() after mxt_acquire_irq() in mxt_initialize()
	replace white-spaces with tab for MXT_COMMS_RETRIGEN
	Changed to check if IRQ is level type]
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Link: https://lore.kernel.org/r/20200727151637.23810-1-jiada_wang@mentor.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Fix non-existing constant in documentation.
Signed-off-by: Pavel Machek (CIP) <pavel@denx.de>
Link: https://lore.kernel.org/r/20200724084025.GB31930@amdSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When I cat some module parameters by sysfs, it displays as follows. It's
better to add a newline for easy reading.

root@syzkaller:~# cat /sys/module/ati_remote2/parameters/mode_mask
0x1froot@syzkaller:~# cat /sys/module/ati_remote2/parameters/channel_mask
0xffffroot@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720092148.9320-1-wangxiongfeng2@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

When I cat parameter 'proto' by sysfs, it displays as follows. It's
better to add a newline for easy reading.

root@syzkaller:~# cat /sys/module/psmouse/parameters/proto
autoroot@syzkaller:~#
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20200720073846.120724-1-wangxiongfeng2@huawei.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Sync up with 'for-linus' branch to resolve conflict in Elan touchpad
driver.

Bring in update to Elan touchpad driver to support newer touchpads with
higher resolution.

Drop the repeated word "to" in a comment.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20200719003131.21050-1-rdunlap@infradead.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Newer controllers (identified as "pattern" version 2) send higher
resolution reports, with 16-bit X and Y coordinates (previous generations
used 12-bit values). These new high resolution reports use report ID of
0x60.

SMbus controllers use the same buffer size for both the new and old
reports, and because of that high resolution reports no longer carry
area of contact data with SMbus.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Link: https://lore.kernel.org/r/20200710054116.5529-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

We do not need to constantly re-query pattern ID, we can instead query it
once and then pass to methods that need it.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds firmware size and page sizes for ic types 0x11, 0x13 and 0x14.
IC 0x14 uses 512-byte firmware page size.

Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Newer ICs with IC type value starting with 0x0D and newer bootloader code
use 128-byte firmware pages. Their bootloader also needs to be switched to
proper mode before executing firmware update.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Prepare driver for devices that use different sizes of firmware pages.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Older controllers in bootloader mode need a different command to retrieve
the IAP version.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Link: https://lore.kernel.org/r/20200714105641.15151-1-jingle.wu@emc.com.twSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Extend fetching and parsing parameters of the controllers to devices with
"patterns" above 1 (which currently should be handled in the same fashion
as devices with pattern 1).
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

On older controllers IC type is reported in the 2nd byte of
ETP_I2C_OSM_VERSION_CMD, however if controller's firmware is not flashed
correctly it may return incorrect data. Fortunately there is also
ETP_I2C_IAP_VERSION_P0_CMD command that can be used when controller in
either normal or IAP mode, and which is guaranteed to return accurate data,
so let's use it.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Not all versions of firmware implement "get pattern" command. When
encountering those assume that the controllers use older pattern.
Signed-off-by: Jingle Wu <jingle.wu@emc.com.tw>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace open-coded __set_bit() with the function.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Link: https://lore.kernel.org/r/cf1dda3a372896cb01033ce084a7deb9620df7aa.1594599118.git.mirq-linux@rere.qmqm.plSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This adds more hardware IDs for Elan touchpads found in various Lenovo
laptops.
Signed-off-by: Dave Wang <dave.wang@emc.com.tw>
Link: https://lore.kernel.org/r/000201d5a8bd$9fead3f0$dfc07bd0$@emc.com.tw
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/latest/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/20200707180857.GA30600@embeddedorSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This fixes two finger trackpad scroll on the Lenovo XiaoXin Air 12.
Without nomux, the trackpad behaves as if only one finger is present and
moves the cursor when trying to scroll.
Signed-off-by: David Pedersen <limero1337@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200625133754.291325-1-limero1337@gmail.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

usb_free_coherent() is safe with NULL addr and this check is
not required.
Signed-off-by: Xu Wang <vulab@iscas.ac.cn>
Link: https://lore.kernel.org/r/20200707030905.3123-1-vulab@iscas.ac.cnSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Switch to the "new" I2C probe API.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Link: https://lore.kernel.org/r/20200520153936.46869-3-sebastian.reichel@collabora.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

The variable error is being initialized with a value that is
never read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200603140431.131347-1-colin.king@canonical.comSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This reverts commit 06170671 - it turns
out that the resolution of 1 unit per mm was not correct for a number of
touch screens, causing touch sizes to be reported as way too large.
See https://crbug.com/1085648Reported-by: Harry Cutts <hcutts@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

This moves the wakeup increment for elan devices to the touch report.
This prevents the drivers from incorrectly reporting a wakeup when the
resume callback resets then device, which causes an interrupt to
occur.
Signed-off-by: Derek Basehore <dbasehore@chromium.org>
Link: https://lore.kernel.org/r/20200706235046.1984283-1-dbasehore@chromium.orgSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Tested on my own laptop, touchpad feels slightly more responsive with
this on, though it might just be placebo.
Signed-off-by: Ilya Katsnelson <me@0upti.me>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://lore.kernel.org/r/20200703143457.132373-1-me@0upti.meSigned-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>