1. 17 Feb, 2016 1 commit
  2. 13 Feb, 2016 1 commit
  3. 12 Feb, 2016 22 commits
  4. 11 Feb, 2016 10 commits
    • Linus Torvalds's avatar
      Merge tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · c05235d5
      Linus Torvalds authored
      Pull GPIO fixes from Linus Walleij:
       - Probe errorpath fix for the Altera
       - irqchip ofnode pointer added to the DaVinci driver
       - controller instance number correction for DaVinci
      
      * tag 'gpio-v4.5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: davinci: Fix the number of controllers allocated
        gpio: davinci: Add the missing of-node pointer
        gpio: gpio-altera: Remove gpiochip on probe failure.
      c05235d5
    • Linus Torvalds's avatar
      Merge tag 'platform-drivers-x86-v4.5-3' of... · da2f912a
      Linus Torvalds authored
      Merge tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86
      
      Pull x86 platform driver fixes from Darren Hart:
       "Just two small fixes for the 4.5-rc cycle:
      
        intel_scu_ipcutil:
         - underflow in scu_reg_access()
      
        intel-hid:
         - fix incorrect entries in intel_hid_keymap"
      
      * tag 'platform-drivers-x86-v4.5-3' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86:
        intel_scu_ipcutil: underflow in scu_reg_access()
        intel-hid: fix incorrect entries in intel_hid_keymap
      da2f912a
    • Linus Torvalds's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 5de6ac75
      Linus Torvalds authored
      Pull networking fixes from David Miller:
      
       1) Fix BPF handling of branch offset adjustmnets on backjumps, from
          Daniel Borkmann.
      
       2) Make sure selinux knows about SOCK_DESTROY netlink messages, from
          Lorenzo Colitti.
      
       3) Fix openvswitch tunnel mtu regression, from David Wragg.
      
       4) Fix ICMP handling of TCP sockets in syn_recv state, from Eric
          Dumazet.
      
       5) Fix SCTP user hmacid byte ordering bug, from Xin Long.
      
       6) Fix recursive locking in ipv6 addrconf, from Subash Abhinov
          Kasiviswanathan.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
        bpf: fix branch offset adjustment on backjumps after patching ctx expansion
        vxlan, gre, geneve: Set a large MTU on ovs-created tunnel devices
        geneve: Relax MTU constraints
        vxlan: Relax MTU constraints
        flow_dissector: Fix unaligned access in __skb_flow_dissector when used by eth_get_headlen
        of: of_mdio: Add marvell, 88e1145 to whitelist of PHY compatibilities.
        selinux: nlmsgtab: add SOCK_DESTROY to the netlink mapping tables
        sctp: translate network order to host order when users get a hmacid
        enic: increment devcmd2 result ring in case of timeout
        tg3: Fix for tg3 transmit queue 0 timed out when too many gso_segs
        net:Add sysctl_max_skb_frags
        tcp: do not drop syn_recv on all icmp reports
        ipv6: fix a lockdep splat
        unix: correctly track in-flight fds in sending process user_struct
        update be2net maintainers' email addresses
        dwc_eth_qos: Reset hardware before PHY start
        ipv6: addrconf: Fix recursive spin lock call
      5de6ac75
    • Ulf Hansson's avatar
      Revert "mmc: block: don't use parameter prefix if built as module" · a5ebb87d
      Ulf Hansson authored
      This reverts commit 829b6962.
      
      Revert this change as it causes a sysfs path to change and therefore
      introduces and ABI regression. More precisely Android's vold is not being
      able to access /sys/module/mmcblk/parameters/perdev_minors any more, since
      the path becomes changed to: "/sys/module/mmc_block/..."
      
      Fixes: 829b6962 ("mmc: block: don't use parameter prefix if built as
      module")
      Reported-by: default avatarJohn Stultz <john.stultz@linaro.org>
      Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      a5ebb87d
    • David Sterba's avatar
      btrfs: properly set the termination value of ctx->pos in readdir · bc4ef759
      David Sterba authored
      The value of ctx->pos in the last readdir call is supposed to be set to
      INT_MAX due to 32bit compatibility, unless 'pos' is intentially set to a
      larger value, then it's LLONG_MAX.
      
      There's a report from PaX SIZE_OVERFLOW plugin that "ctx->pos++"
      overflows (https://forums.grsecurity.net/viewtopic.php?f=1&t=4284), on a
      64bit arch, where the value is 0x7fffffffffffffff ie. LLONG_MAX before
      the increment.
      
      We can get to that situation like that:
      
      * emit all regular readdir entries
      * still in the same call to readdir, bump the last pos to INT_MAX
      * next call to readdir will not emit any entries, but will reach the
        bump code again, finds pos to be INT_MAX and sets it to LLONG_MAX
      
      Normally this is not a problem, but if we call readdir again, we'll find
      'pos' set to LLONG_MAX and the unconditional increment will overflow.
      
      The report from Victor at
      (http://thread.gmane.org/gmane.comp.file-systems.btrfs/49500) with debugging
      print shows that pattern:
      
       Overflow: e
       Overflow: 7fffffff
       Overflow: 7fffffffffffffff
       PAX: size overflow detected in function btrfs_real_readdir
         fs/btrfs/inode.c:5760 cicus.935_282 max, count: 9, decl: pos; num: 0;
         context: dir_context;
       CPU: 0 PID: 2630 Comm: polkitd Not tainted 4.2.3-grsec #1
       Hardware name: Gigabyte Technology Co., Ltd. H81ND2H/H81ND2H, BIOS F3 08/11/2015
        ffffffff81901608 0000000000000000 ffffffff819015e6 ffffc90004973d48
        ffffffff81742f0f 0000000000000007 ffffffff81901608 ffffc90004973d78
        ffffffff811cb706 0000000000000000 ffff8800d47359e0 ffffc90004973ed8
       Call Trace:
        [<ffffffff81742f0f>] dump_stack+0x4c/0x7f
        [<ffffffff811cb706>] report_size_overflow+0x36/0x40
        [<ffffffff812ef0bc>] btrfs_real_readdir+0x69c/0x6d0
        [<ffffffff811dafc8>] iterate_dir+0xa8/0x150
        [<ffffffff811e6d8d>] ? __fget_light+0x2d/0x70
        [<ffffffff811dba3a>] SyS_getdents+0xba/0x1c0
       Overflow: 1a
        [<ffffffff811db070>] ? iterate_dir+0x150/0x150
        [<ffffffff81749b69>] entry_SYSCALL_64_fastpath+0x12/0x83
      
      The jump from 7fffffff to 7fffffffffffffff happens when new dir entries
      are not yet synced and are processed from the delayed list. Then the code
      could go to the bump section again even though it might not emit any new
      dir entries from the delayed list.
      
      The fix avoids entering the "bump" section again once we've finished
      emitting the entries, both for synced and delayed entries.
      
      References: https://forums.grsecurity.net/viewtopic.php?f=1&t=4284Reported-by: default avatarVictor <services@swwu.com>
      CC: stable@vger.kernel.org
      Signed-off-by: default avatarDavid Sterba <dsterba@suse.com>
      Tested-by: default avatarHolger Hoffstätte <holger.hoffstaette@googlemail.com>
      Signed-off-by: default avatarChris Mason <clm@fb.com>
      bc4ef759
    • Adrian Hunter's avatar
      mmc: sdhci-acpi: Fix card detect race for Intel BXT/APL · 6a645dd8
      Adrian Hunter authored
      Intel BXT/APL use a card detect GPIO however the host controller
      will not enable bus power unless it's card detect also reflects
      the presence of a card.  Unfortunately those 2 things race which
      can result in commands not starting, after which the controller
      does nothing and there is a 10 second wait for the driver's
      10-second timer to timeout.
      
      That is fixed by having the driver look also at the present state
      register to determine if the card is present.  Consequently, provide
      a 'get_cd' mmc host operation for BXT/APL that does that.
      Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Cc: stable@vger.kernel.org # v4.4+
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      6a645dd8
    • Adrian Hunter's avatar
      mmc: sdhci-pci: Fix card detect race for Intel BXT/APL · 163cbe31
      Adrian Hunter authored
      Intel BXT/APL use a card detect GPIO however the host controller
      will not enable bus power unless it's card detect also reflects
      the presence of a card.  Unfortunately those 2 things race which
      can result in commands not starting, after which the controller
      does nothing and there is a 10 second wait for the driver's
      10-second timer to timeout.
      
      That is fixed by having the driver look also at the present state
      register to determine if the card is present.  Consequently, provide
      a 'get_cd' mmc host operation for BXT/APL that does that.
      Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Cc: stable@vger.kernel.org # v4.4+
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      163cbe31
    • Adrian Hunter's avatar
      mmc: sdhci: Allow override of get_cd() called from sdhci_request() · 8d28b7a7
      Adrian Hunter authored
      Drivers may need to provide their own get_cd() mmc host op, but
      currently the internals of the current op (sdhci_get_cd()) are
      provided by sdhci_do_get_cd() which is also called from
      sdhci_request().
      
      To allow override of the get_cd functionality, change sdhci_request()
      to call ->get_cd() instead of sdhci_do_get_cd().
      
      Note, in the future the call to ->get_cd() will likely be removed
      from sdhci_request() since most drivers don't need actually it.
      However this change is being done now to facilitate a subsequent
      bug fix.
      Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Cc: stable@vger.kernel.org # v4.4+
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      8d28b7a7
    • Adrian Hunter's avatar
      mmc: sdhci: Allow override of mmc host operations · bf60e592
      Adrian Hunter authored
      In the past, fixes for specific hardware devices were implemented
      in sdhci using quirks.  That approach is no longer accepted because
      the growing number of quirks was starting to make the code difficult
      to understand and maintain.
      
      One alternative to quirks, is to allow drivers to override the default
      mmc host operations.  This patch makes it easy to do that, and it is
      needed for a subsequent bug fix, for which separate patches are
      provided.
      Signed-off-by: default avatarAdrian Hunter <adrian.hunter@intel.com>
      Cc: stable@vger.kernel.org # v4.4+
      Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
      bf60e592
    • Chris Mason's avatar
      Merge branch 'integration-4.5' of... · 43d871f0
      Chris Mason authored
      Merge branch 'integration-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/fdmanana/linux into for-linus-4.5
      43d871f0
  5. 10 Feb, 2016 6 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma · 721675fc
      Linus Torvalds authored
      Pull rdma fixes from Doug Ledford:
       "A few more minor fixes for rc3:
      
         - One fix to ipoib
         - One fix to core sysfs code
         - Four patches that resolve an oops found in testing of ocrdma and a
           couple other ocrdma issues"
      
      * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
        RDMA/ocrdma: Fixing ocrdma debugfs directory remove
        RDMA/ocrdma: Fix pkey_index returned by driver in rq work completion
        RDMA/ocrdma: populate max_sge_rd in device attributes
        RDMA/ocrdma: Initialize stats resources in the driver before ib device registration.
        IB/sysfs: remove unused va_list args
        IB/IPoIB: Do not set skb truesize since using one linearskb
      721675fc
    • Dave Airlie's avatar
      Merge branch 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux into drm-fixes · c92a428f
      Dave Airlie authored
      radeon and amdgpu fixes for 4.5.  Highlights:
      - powerplay fixes for amdgpu
      - race fixes in the sub-allocator in radeon and amdgpu
      - hibernate fix for amdgpu
      - fix a possible circular locking in userptr handling in amdgpu
      
      * 'drm-fixes-4.5' of git://people.freedesktop.org/~agd5f/linux: (21 commits)
        drm/amdgpu: fix issue with overlapping userptrs
        drm/radeon: hold reference to fences in radeon_sa_bo_new
        drm/amdgpu: remove unnecessary forward declaration
        drm/amdgpu: hold reference to fences in amdgpu_sa_bo_new (v2)
        drm/amdgpu: fix s4 resume
        drm/amdgpu/cz: plumb pg flags through to powerplay
        drm/amdgpu/tonga: plumb pg flags through to powerplay
        drma/dmgpu: move cg and pg flags into shared headers
        drm/amdgpu: remove unused cg defines
        drm/amdgpu: add a cgs interface to fetch cg and pg flags
        drm/amd/powerplay/tonga: disable vce pg
        drm/amd/powerplay/tonga: disable uvd pg
        drm/amd/powerplay/cz: disable vce pg
        drm/amd/powerplay/cz: disable uvd pg
        drm/amdgpu: be consistent with uvd cg flags
        drm/amdgpu: clean up vce pg flags for cz/st
        drm/amdgpu: handle vce pg flags properly
        drm/amdgpu: handle uvd pg flags properly
        drm/amdgpu/dpm/ci: switch over to the common pcie caps interface
        drm/amdgpu/cik: don't mess with aspm if gpu is root bus
        ...
      c92a428f
    • Daniel Borkmann's avatar
      bpf: fix branch offset adjustment on backjumps after patching ctx expansion · a1b14d27
      Daniel Borkmann authored
      When ctx access is used, the kernel often needs to expand/rewrite
      instructions, so after that patching, branch offsets have to be
      adjusted for both forward and backward jumps in the new eBPF program,
      but for backward jumps it fails to account the delta. Meaning, for
      example, if the expansion happens exactly on the insn that sits at
      the jump target, it doesn't fix up the back jump offset.
      
      Analysis on what the check in adjust_branches() is currently doing:
      
        /* adjust offset of jmps if necessary */
        if (i < pos && i + insn->off + 1 > pos)
          insn->off += delta;
        else if (i > pos && i + insn->off + 1 < pos)
          insn->off -= delta;
      
      First condition (forward jumps):
      
        Before:                         After:
      
        insns[0]                        insns[0]
        insns[1] <--- i/insn            insns[1] <--- i/insn
        insns[2] <--- pos               insns[P] <--- pos
        insns[3]                        insns[P]  `------| delta
        insns[4] <--- target_X          insns[P]   `-----|
        insns[5]                        insns[3]
                                        insns[4] <--- target_X
                                        insns[5]
      
      First case is if we cross pos-boundary and the jump instruction was
      before pos. This is handeled correctly. I.e. if i == pos, then this
      would mean our jump that we currently check was the patchlet itself
      that we just injected. Since such patchlets are self-contained and
      have no awareness of any insns before or after the patched one, the
      delta is correctly not adjusted. Also, for the second condition in
      case of i + insn->off + 1 == pos, means we jump to that newly patched
      instruction, so no offset adjustment are needed. That part is correct.
      
      Second condition (backward jumps):
      
        Before:                         After:
      
        insns[0]                        insns[0]
        insns[1] <--- target_X          insns[1] <--- target_X
        insns[2] <--- pos <-- target_Y  insns[P] <--- pos <-- target_Y
        insns[3]                        insns[P]  `------| delta
        insns[4] <--- i/insn            insns[P]   `-----|
        insns[5]                        insns[3]
                                        insns[4] <--- i/insn
                                        insns[5]
      
      Second interesting case is where we cross pos-boundary and the jump
      instruction was after pos. Backward jump with i == pos would be
      impossible and pose a bug somewhere in the patchlet, so the first
      condition checking i > pos is okay only by itself. However, i +
      insn->off + 1 < pos does not always work as intended to trigger the
      adjustment. It works when jump targets would be far off where the
      delta wouldn't matter. But, for example, where the fixed insn->off
      before pointed to pos (target_Y), it now points to pos + delta, so
      that additional room needs to be taken into account for the check.
      This means that i) both tests here need to be adjusted into pos + delta,
      and ii) for the second condition, the test needs to be <= as pos
      itself can be a target in the backjump, too.
      
      Fixes: 9bac3d6d ("bpf: allow extended BPF programs access skb fields")
      Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a1b14d27
    • Linus Torvalds's avatar
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input · 74c7b2af
      Linus Torvalds authored
      Pull input updates from Dmitry Torokhov:
       "Just small driver fixups"
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
        Input: colibri-vf50-ts - add missing #include <linux/of.h>
        Input: adp5589 - fix row 5 handling for adp5589
        Input: edt-ft5x06 - fix setting gain, offset, and threshold via device tree
        Input: vmmouse - fix absolute device registration
        Input: serio - drop warnings in case of EPROBE_DEFER from serio_find_driver()
        Input: cap11xx - add missing of_node_put
        Input: sirfsoc-onkey - allow modular build
        Input: xpad - remove unused function
      74c7b2af
    • Linus Torvalds's avatar
      Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata · 4e541699
      Linus Torvalds authored
      Pull libata fixes from Tejun Heo:
      
       - PORTS_IMPL workaround for very early ahci controllers is misbehaving
         on new systems.  Disabled on recent ahci versions.
      
       - Old-style PIO state machine had a horrible locking problem.  Don't
         know how we've been getting away this far.  Fixed.
      
       - Other device specific updates.
      
      * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
        ahci: Intel DNV device IDs SATA
        libata: fix sff host state machine locking while polling
        libata-sff: use WARN instead of BUG on illegal host state machine state
        libata: disable forced PORTS_IMPL for >= AHCI 1.3
        libata: blacklist a Viking flash model for MWDMA corruption
        drivers: ata: wake port before DMA stop for ALPM
      4e541699
    • Linus Torvalds's avatar
      Merge branch 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · fb0dc5f1
      Linus Torvalds authored
      Pull cgroup fixes from Tejun Heo:
      
       - The destruction path of cgroup objects are asynchronous and
         multi-staged and some of them ended up destroying parents before
         children leading to failures in cpu and memory controllers.  Ensure
         that parents are always destroyed after children.
      
       - cpuset mm node migration was performed synchronously while holding
         threadgroup and cgroup mutexes and the recent threadgroup locking
         update resulted in a possible deadlock.  The migration is best effort
         and shouldn't have been performed under those locks to begin with.
         Made asynchronous.
      
       - Minor documentation fix.
      
      * 'for-4.5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
        Documentation: cgroup: Fix 'cgroup-legacy' -> 'cgroup-v1'
        cgroup: make sure a parent css isn't freed before its children
        cgroup: make sure a parent css isn't offlined before its children
        cpuset: make mm migration asynchronous
      fb0dc5f1